feat(B07): 표준 횡단면도 — 치수·측구 확대도·암반선 2단

빈 도각이던 표준 횡단면도를 실제 도면으로 만듦.

- 본 그림: B06 좌측 패널 모식도와 같은 배치를 실치수로 그림(1/50). 노폭·노견·
  측구 상단폭·노면 전폭에 치수선(눈금+치수값)을 붙이고, 절토·성토 경사비와
  횡단경사를 표기. 값은 B06 표준 횡단면 설정을 그대로 읽고 없으면 config 기본값.
- 측구 부분 확대도(1/10): 상단폭·저폭·깊이 치수 + 확대 축척 표기.
- 암반 2단 절토: 아래는 암반 경사(1:0.4), 위는 토사 경사(1:1), 갈리는 높이에
  암반선을 파선으로 긋고 각도를 함께 적음.
- 암 L형 측구·포장 횡단경사는 주기(※)로 적음 — 본 그림은 토사 기준.

곁들여: Router_Support 가 700줄을 넘어 재수출 import 를 한 문장으로 합쳐 681줄로
줄임(기능 변화 없음).

검증: 치수값이 STANDARD_CROSS_SECTION 과 일치(500·3000·500·900·4000), 확대도
900·300·300 + S=1/10, 2단 절토선 꺾임점 1개, 콘텐츠 358.2x172.6 mm ≤ A1 작도영역.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

B07_DesignDetail/B07_DesignDetail_Api_Fetch.ts

@@ -14,6 +14,7 @@ export interface DesignDrawingItem {
     | "plan"
     | "landuse"
     | "plan_lidar"
+    | "cross_standard"
     | "blank";
   label: string;
   chainage_m: number | null;
@@ -101,6 +102,7 @@ export interface DesignDrawingResponse {
     | "plan"
     | "landuse"
     | "plan_lidar"
+    | "cross_standard"
     | "blank";
   label: string;
   drawing: CadDrawing;

B07_DesignDetail/B07_DesignDetail_Engine_Cad_Standard.py

@@ -0,0 +1,581 @@
+"""B07 표준 횡단면도 CAD 조립 — 변수 모식도에 치수를 넣고, 측구 확대도·암반선 2단을 함께 낸다.
+
+사용자 지시(2026-09-04) — 「표준 횡단면도 좌상단에 기본값으로 B06 좌측 패널의 변수 위치
+안내와 비슷한 그림을 넣고, 변수 이름 자리에 도면처럼 치수를 적을 것. 측구는 작으니 부분
+확대도로. 발파·암반이면 암반선과 각도를 넣어 절토측이 2단(토사 각도 + 암반 각도)으로
+표현될 것」.
+
+배치는 B06 좌측 패널 모식도(`B06_Section_UI_Standard_Diagram.ts`)와 같다 — 좌가 절토·측구,
+우가 성토, 가운데가 계획고. 다른 점은 **실치수**라는 것이다. 모식도는 위치 안내라 비율이
+없지만 도면은 축척(본 그림 1/50, 측구 확대도 1/10)대로 그리고 치수선을 붙인다.
+
+값은 B06 「표준 횡단면 설정」(`standard_cross_section`)을 그대로 읽는다 — 여기서 기하를
+다시 정하지 않는다. 저장값이 없으면 config 기본값을 쓴다.
+
+좌표 규약: 종이 mm = 실거리 m x MM. 원점은 계획고(노면 중심).
+"""
+
+import math
+from typing import Any
+
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
+    DRAWING_FORMAT,
+    FRAME_LAYER_ID,
+    TABLE_LABEL_COLOR,
+    _layer,
+    _text_entity,
+    polyline_entity,
+)
+from B07_DesignDetail.B07_DesignDetail_Engine_Template import (
+    entities_bbox,
+    frame_entities,
+    scale_fields,
+)
+from config.config_system import (
+    DRAWING_SCALE_CROSS_STANDARD,
+    DRAWING_SCALE_DITCH_DETAIL,
+    STANDARD_CROSS_SECTION,
+)
+
+STANDARD_KIND = "cross_standard"
+STANDARD_LABEL = "표준 횡단면도"
+
+# 도면 좌표 = 종이 mm. 본 그림 1/50 -> 1 m = 20 mm, 측구 확대도 1/10 -> 1 m = 100 mm.
+MM = 1000.0 / DRAWING_SCALE_CROSS_STANDARD
+DETAIL_MM = 1000.0 / DRAWING_SCALE_DITCH_DETAIL
+
+SECTION_LAYER_ID = "b07-std-section"
+ROCK_LAYER_ID = "b07-std-rock"
+DIM_LAYER_ID = "b07-std-dim"
+DETAIL_LAYER_ID = "b07-std-detail"
+NOTE_LAYER_ID = "b07-std-note"
+TITLE_LAYER_ID = "b07-std-title"
+
+SECTION_COLOR = "#111111"
+ROCK_COLOR = "#a63d3d"
+DIM_COLOR = "#2f6fb0"
+DETAIL_COLOR = "#111111"
+NOTE_COLOR = "#333333"
+
+_LINE_WIDTH = 2
+_TITLE_FONT_SIZE = 7.0
+_LABEL_FONT_SIZE = 3.0
+_DIM_FONT_SIZE = 2.6
+_NOTE_FONT_SIZE = 2.8
+
+# 그림에 세울 절·성토 높이(m) — 표준도는 실제 지형이 없으므로 대표 높이로 그린다.
+_CUT_HEIGHT_M = 3.0
+_FILL_HEIGHT_M = 3.0
+# 암반 구간: 절토 밑에서 이만큼이 암반이고 그 위가 토사다(2단 절토).
+_ROCK_HEIGHT_M = 1.5
+
+_DIM_TICK_MM = 1.6  # 치수선 끝 눈금 반길이
+_DIM_OFFSET_MM = 8.0  # 치수선을 그림에서 띄우는 거리
+_DIM_GAP_MM = 6.0  # 치수선 단 사이
+
+
+def _ground(kind: str, standard: dict[str, Any] | None) -> dict[str, Any]:
+    """표준 횡단면 설정에서 한 지반유형 값을 꺼낸다. 없으면 config 기본값."""
+    stored = (standard or {}).get(kind)
+    if isinstance(stored, dict) and stored:
+        merged = dict(STANDARD_CROSS_SECTION.get(kind) or {})
+        merged.update(stored)
+        return merged
+    return dict(STANDARD_CROSS_SECTION.get(kind) or {})
+
+
+def _number(value: Any, fallback: float) -> float:
+    return float(value) if isinstance(value, (int, float)) else fallback
+
+
+def _dim_entities(
+    drawing_id: str,
+    tag: str,
+    start: tuple[float, float],
+    end: tuple[float, float],
+    label: str,
+    layer_id: str = DIM_LAYER_ID,
+) -> list[dict[str, Any]]:
+    """치수선 한 벌(치수선 + 양끝 눈금 + 치수값). 좌표는 종이 mm."""
+    entities: list[dict[str, Any]] = []
+    line = polyline_entity(drawing_id, [start, end], layer_id, DIM_COLOR, suffix=f":dim:{tag}")
+    if line:
+        entities.append(line)
+    dx, dy = end[0] - start[0], end[1] - start[1]
+    length = math.hypot(dx, dy) or 1.0
+    nx, ny = -dy / length, dx / length
+    for index, point in enumerate((start, end)):
+        tick = polyline_entity(
+            drawing_id,
+            [
+                (point[0] - nx * _DIM_TICK_MM, point[1] - ny * _DIM_TICK_MM),
+                (point[0] + nx * _DIM_TICK_MM, point[1] + ny * _DIM_TICK_MM),
+            ],
+            layer_id,
+            DIM_COLOR,
+            suffix=f":dim:{tag}:tick:{index}",
+        )
+        if tick:
+            entities.append(tick)
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:dim:{tag}:text",
+            label,
+            (start[0] + end[0]) / 2.0 + nx * 2.2,
+            (start[1] + end[1]) / 2.0 + ny * 2.2,
+            layer_id,
+            _DIM_FONT_SIZE,
+            DIM_COLOR,
+        )
+    )
+    return entities
+
+
+def _section_geometry(values: dict[str, Any]) -> dict[str, Any]:
+    """표준 단면의 실좌표(m) 꼭짓점. 좌가 절토·측구, 우가 성토(B06 모식도와 같은 배치)."""
+    road = _number(values.get("road_width_m"), 3.0)
+    shoulder_left = _number(values.get("shoulder_left_m"), 0.5)
+    shoulder_right = _number(values.get("shoulder_right_m"), 0.5)
+    ditch = values.get("ditch") if isinstance(values.get("ditch"), dict) else {}
+    top_width = _number(ditch.get("top_width_m"), 0.9)
+    bottom_width = _number(ditch.get("bottom_width_m"), 0.3)
+    depth = _number(ditch.get("depth_m"), 0.3)
+    slope = values.get("cross_slope_pct") if isinstance(values.get("cross_slope_pct"), dict) else {}
+    cross_pct = _number(slope.get("max"), _number(slope.get("min"), 3.0))
+    cut_ratio = _number(values.get("cut_slope_ratio"), 1.0)
+    fill_ratio = _number(values.get("fill_slope_ratio"), 1.2)
+
+    road_left = -(road / 2.0 + shoulder_left)
+    road_right = road / 2.0 + shoulder_right
+    # 횡단경사는 측구(좌) 쪽으로 내려간다 — 노면 좌끝이 계획고보다 낮다.
+    drop = abs(road_left) * cross_pct / 100.0
+    surface = [(road_right, 0.0), (road_left, -drop)]
+
+    ditch_top_left = road_left - top_width
+    ditch_bottom_y = -drop - depth
+    inset = (top_width - bottom_width) / 2.0
+    ditch_line = [
+        (road_left, -drop),
+        (road_left - inset, ditch_bottom_y),
+        (ditch_top_left + inset, ditch_bottom_y),
+        (ditch_top_left, -drop),
+    ]
+    cut_top = (ditch_top_left - _CUT_HEIGHT_M * cut_ratio, -drop + _CUT_HEIGHT_M)
+    fill_toe = (road_right + _FILL_HEIGHT_M * fill_ratio, -_FILL_HEIGHT_M)
+    return {
+        "road": road,
+        "shoulder_left": shoulder_left,
+        "shoulder_right": shoulder_right,
+        "top_width": top_width,
+        "bottom_width": bottom_width,
+        "depth": depth,
+        "cross_pct": cross_pct,
+        "cut_ratio": cut_ratio,
+        "fill_ratio": fill_ratio,
+        "road_left": road_left,
+        "road_right": road_right,
+        "drop": drop,
+        "surface": surface,
+        "ditch_line": ditch_line,
+        "ditch_top_left": ditch_top_left,
+        "cut_start": (ditch_top_left, -drop),
+        "cut_top": cut_top,
+        "fill_toe": fill_toe,
+    }
+
+
+def _rock_entities(
+    drawing_id: str, geometry: dict[str, Any], rock_ratio: float, paper: Any
+) -> list[dict[str, Any]]:
+    """암반선과 2단 절토(아래=암반각, 위=토사각)를 절토측에 덧그린다."""
+    entities: list[dict[str, Any]] = []
+    start_x, start_y = geometry["cut_start"]
+    soil_ratio = geometry["cut_ratio"]
+    # 아래 단: 암반각으로 _ROCK_HEIGHT_M 만큼 올라간다.
+    bench = (start_x - _ROCK_HEIGHT_M * rock_ratio, start_y + _ROCK_HEIGHT_M)
+    # 위 단: 그 위는 토사각.
+    upper = (
+        bench[0] - (_CUT_HEIGHT_M - _ROCK_HEIGHT_M) * soil_ratio,
+        bench[1] + (_CUT_HEIGHT_M - _ROCK_HEIGHT_M),
+    )
+    two_stage = polyline_entity(
+        drawing_id,
+        [paper((start_x, start_y)), paper(bench), paper(upper)],
+        ROCK_LAYER_ID,
+        ROCK_COLOR,
+        suffix=":rock:cut",
+        width=_LINE_WIDTH,
+    )
+    if two_stage:
+        entities.append(two_stage)
+    # 암반선 — 2단이 갈리는 높이의 수평 파선.
+    boundary = polyline_entity(
+        drawing_id,
+        [paper((bench[0] - 1.5, bench[1])), paper((geometry["road_right"], bench[1]))],
+        ROCK_LAYER_ID,
+        ROCK_COLOR,
+        suffix=":rock:boundary",
+        dash=[6, 4],
+    )
+    if boundary:
+        entities.append(boundary)
+    label_x, label_y = paper((bench[0] - 1.6, bench[1]))
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:rock:boundary:text",
+            "암반선",
+            label_x,
+            label_y + 2.5,
+            ROCK_LAYER_ID,
+            _LABEL_FONT_SIZE,
+            ROCK_COLOR,
+            align="right",
+        )
+    )
+    mid_lower = paper(((start_x + bench[0]) / 2.0, (start_y + bench[1]) / 2.0))
+    mid_upper = paper(((bench[0] + upper[0]) / 2.0, (bench[1] + upper[1]) / 2.0))
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:rock:lower",
+            f"암반 1:{rock_ratio:g}",
+            mid_lower[0] - 6.0,
+            mid_lower[1],
+            ROCK_LAYER_ID,
+            _DIM_FONT_SIZE,
+            ROCK_COLOR,
+            align="right",
+        )
+    )
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:rock:upper",
+            f"토사 1:{soil_ratio:g}",
+            mid_upper[0] - 6.0,
+            mid_upper[1],
+            ROCK_LAYER_ID,
+            _DIM_FONT_SIZE,
+            ROCK_COLOR,
+            align="right",
+        )
+    )
+    return entities
+
+
+def _ditch_detail_entities(
+    drawing_id: str, geometry: dict[str, Any], origin: tuple[float, float]
+) -> list[dict[str, Any]]:
+    """측구 부분 확대도(1/10) — 작아서 본 그림에서는 치수를 읽을 수 없다."""
+    entities: list[dict[str, Any]] = []
+    top_width = geometry["top_width"]
+    bottom_width = geometry["bottom_width"]
+    depth = geometry["depth"]
+    inset = (top_width - bottom_width) / 2.0
+    ox, oy = origin
+
+    def paper(point: tuple[float, float]) -> tuple[float, float]:
+        return (ox + point[0] * DETAIL_MM, oy + point[1] * DETAIL_MM)
+
+    shape = [
+        (0.0, 0.0),
+        (inset, -depth),
+        (inset + bottom_width, -depth),
+        (top_width, 0.0),
+    ]
+    outline = polyline_entity(
+        drawing_id,
+        [paper(point) for point in shape],
+        DETAIL_LAYER_ID,
+        DETAIL_COLOR,
+        suffix=":detail:ditch",
+        width=_LINE_WIDTH,
+    )
+    if outline:
+        entities.append(outline)
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "detail-top",
+            paper((0.0, 0.0 + 0.06)),
+            paper((top_width, 0.0 + 0.06)),
+            f"{top_width * 1000:.0f}",
+            DETAIL_LAYER_ID,
+        )
+    )
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "detail-bottom",
+            paper((inset, -depth - 0.06)),
+            paper((inset + bottom_width, -depth - 0.06)),
+            f"{bottom_width * 1000:.0f}",
+            DETAIL_LAYER_ID,
+        )
+    )
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "detail-depth",
+            paper((top_width + 0.08, 0.0)),
+            paper((top_width + 0.08, -depth)),
+            f"{depth * 1000:.0f}",
+            DETAIL_LAYER_ID,
+        )
+    )
+    title = paper((top_width / 2.0, 0.3))
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:detail:title",
+            f"측구 상세도 (S = 1/{DRAWING_SCALE_DITCH_DETAIL})",
+            title[0],
+            title[1],
+            DETAIL_LAYER_ID,
+            _LABEL_FONT_SIZE,
+            TABLE_LABEL_COLOR,
+        )
+    )
+    return entities
+
+
+def build_standard_cross_drawing(
+    drawing_id: str, label: str, standard: dict[str, Any] | None = None
+) -> dict[str, Any]:
+    """표준 횡단면도 한 장을 만든다 — 본 그림 + 치수 + 측구 확대도 + 암반 2단 + 주기."""
+    soil = _ground("soil", standard)
+    rock = _ground("rock", standard)
+    paved = _ground("paved", standard)
+    geometry = _section_geometry(soil)
+
+    def paper(point: tuple[float, float]) -> tuple[float, float]:
+        return (point[0] * MM, point[1] * MM)
+
+    entities: list[dict[str, Any]] = []
+    # 본 그림: 절토면 - 측구 - 노면 - 성토면을 한 줄로 잇는다.
+    outline = [
+        geometry["cut_top"],
+        *geometry["ditch_line"][::-1],
+        *geometry["surface"][::-1],
+        geometry["fill_toe"],
+    ]
+    body = polyline_entity(
+        drawing_id,
+        [paper(point) for point in outline],
+        SECTION_LAYER_ID,
+        SECTION_COLOR,
+        suffix=":section",
+        width=_LINE_WIDTH,
+    )
+    if body:
+        entities.append(body)
+    # 중심선(계획고).
+    center = polyline_entity(
+        drawing_id,
+        [paper((0.0, 1.2)), paper((0.0, -1.2))],
+        SECTION_LAYER_ID,
+        SECTION_COLOR,
+        suffix=":center",
+        dash=[10, 3, 2, 3],
+    )
+    if center:
+        entities.append(center)
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:center:text",
+            "계획고",
+            *paper((0.0, 1.45)),
+            SECTION_LAYER_ID,
+            _LABEL_FONT_SIZE,
+            SECTION_COLOR,
+        )
+    )
+
+    # 치수선 — 노면 아래 두 단(위: 노견·노폭·노견, 아래: 노면 전폭).
+    base_y = min(geometry["fill_toe"][1], -geometry["drop"] - geometry["depth"])
+    dim_y = base_y * MM - _DIM_OFFSET_MM
+    half = geometry["road"] / 2.0
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "shoulder-left",
+            (geometry["road_left"] * MM, dim_y),
+            (-half * MM, dim_y),
+            f"{geometry['shoulder_left'] * 1000:.0f}",
+        )
+    )
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "road",
+            (-half * MM, dim_y),
+            (half * MM, dim_y),
+            f"{geometry['road'] * 1000:.0f}",
+        )
+    )
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "shoulder-right",
+            (half * MM, dim_y),
+            (geometry["road_right"] * MM, dim_y),
+            f"{geometry['shoulder_right'] * 1000:.0f}",
+        )
+    )
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "ditch-top",
+            (geometry["ditch_top_left"] * MM, dim_y),
+            (geometry["road_left"] * MM, dim_y),
+            f"{geometry['top_width'] * 1000:.0f}",
+        )
+    )
+    roadbed_width_m = geometry["road"] + geometry["shoulder_left"] + geometry["shoulder_right"]
+    entities.extend(
+        _dim_entities(
+            drawing_id,
+            "roadbed",
+            (geometry["road_left"] * MM, dim_y - _DIM_GAP_MM),
+            (geometry["road_right"] * MM, dim_y - _DIM_GAP_MM),
+            f"{roadbed_width_m * 1000:.0f}",
+        )
+    )
+
+    # 경사·횡단경사 표기.
+    cut_mid = paper(
+        (
+            (geometry["cut_start"][0] + geometry["cut_top"][0]) / 2.0,
+            (geometry["cut_start"][1] + geometry["cut_top"][1]) / 2.0,
+        )
+    )
+    fill_mid = paper(
+        (
+            (geometry["road_right"] + geometry["fill_toe"][0]) / 2.0,
+            (0.0 + geometry["fill_toe"][1]) / 2.0,
+        )
+    )
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:cut:text",
+            f"절토 1:{geometry['cut_ratio']:g}",
+            cut_mid[0] - 4.0,
+            cut_mid[1] + 3.0,
+            SECTION_LAYER_ID,
+            _DIM_FONT_SIZE,
+            SECTION_COLOR,
+            align="right",
+        )
+    )
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:fill:text",
+            f"성토 1:{geometry['fill_ratio']:g}",
+            fill_mid[0] + 4.0,
+            fill_mid[1] + 3.0,
+            SECTION_LAYER_ID,
+            _DIM_FONT_SIZE,
+            SECTION_COLOR,
+            align="left",
+        )
+    )
+    entities.append(
+        _text_entity(
+            f"{drawing_id}:cross-slope:text",
+            f"횡단경사 {geometry['cross_pct']:g}%",
+            *paper((geometry["road_left"] / 2.0, 0.6)),
+            SECTION_LAYER_ID,
+            _DIM_FONT_SIZE,
+            SECTION_COLOR,
+        )
+    )
+
+    # 암반 구간 2단 절토.
+    entities.extend(
+        _rock_entities(drawing_id, geometry, _number(rock.get("cut_slope_ratio"), 0.4), paper)
+    )
+
+    body_bbox = entities_bbox(entities)
+    right = body_bbox[2] if body_bbox else 0.0
+    top = body_bbox[3] if body_bbox else 0.0
+
+    # 측구 부분 확대도 — 본 그림 오른쪽 위.
+    entities.extend(_ditch_detail_entities(drawing_id, geometry, (right + 28.0, top - 30.0)))
+
+    # 주기: 구간별로 달라지는 값만 적는다(기본은 토사).
+    notes = [
+        "※ 본 그림은 토사 구간 기준임.",
+        f"※ 암 구간 — 절토 1:{_number(rock.get('cut_slope_ratio'), 0.4):g}, "
+        f"L형 측구 {_number((rock.get('ditch_l_type') or {}).get('width_m'), 0.5) * 1000:.0f}"
+        f"×{_number((rock.get('ditch_l_type') or {}).get('depth_m'), 0.1) * 1000:.0f}mm "
+        "(횡단면도에서 일반·L형 중 선택).",
+        f"※ 포장 구간 — 절·성토 경사는 토사와 같고 횡단경사만 "
+        f"{_number((paved.get('cross_slope_pct') or {}).get('min'), 1.5):g}~"
+        f"{_number((paved.get('cross_slope_pct') or {}).get('max'), 2.0):g}% 임.",
+        "※ 치수 단위 mm.",
+    ]
+    note_bbox = entities_bbox(entities)
+    note_x = note_bbox[0] if note_bbox else 0.0
+    note_y = (note_bbox[1] if note_bbox else 0.0) - 12.0
+    for index, note in enumerate(notes):
+        entities.append(
+            _text_entity(
+                f"{drawing_id}:note:{index}",
+                note,
+                note_x,
+                note_y - index * 5.0,
+                NOTE_LAYER_ID,
+                _NOTE_FONT_SIZE,
+                NOTE_COLOR,
+                align="left",
+            )
+        )
+
+    bbox = entities_bbox(entities)
+    if bbox:
+        min_bx, _min_by, max_bx, max_by = bbox
+        entities.append(
+            _text_entity(
+                f"{drawing_id}:title",
+                label,
+                (min_bx + max_bx) / 2.0,
+                max_by + 12.0,
+                TITLE_LAYER_ID,
+                _TITLE_FONT_SIZE,
+                TABLE_LABEL_COLOR,
+            )
+        )
+        entities.append(
+            _text_entity(
+                f"{drawing_id}:scale",
+                f"S = 1/{DRAWING_SCALE_CROSS_STANDARD}",
+                max_bx,
+                max_by + 5.0,
+                TITLE_LAYER_ID,
+                _DIM_FONT_SIZE,
+                TABLE_LABEL_COLOR,
+                align="right",
+            )
+        )
+        entities.extend(
+            frame_entities(
+                drawing_id,
+                entities_bbox(entities) or bbox,
+                fit=False,
+                fields={
+                    "도면명": label,
+                    **scale_fields(("", DRAWING_SCALE_CROSS_STANDARD)),
+                },
+            )
+        )
+
+    return {
+        "format": DRAWING_FORMAT,
+        "entities": entities,
+        "layers": [
+            _layer(SECTION_LAYER_ID, "표준 단면"),
+            _layer(ROCK_LAYER_ID, "암반선·2단 절토"),
+            _layer(DIM_LAYER_ID, "치수"),
+            _layer(DETAIL_LAYER_ID, "측구 상세도"),
+            _layer(NOTE_LAYER_ID, "주기"),
+            _layer(TITLE_LAYER_ID, "표제"),
+            _layer(FRAME_LAYER_ID, "도각", locked=True),
+        ],
+    }

B07_DesignDetail/B07_DesignDetail_Router.py

@@ -17,6 +17,7 @@ from B06_Section.B06_Section_Repository import (
     get_cross_section_design,
     get_cross_section_designs,
     get_longitudinal_section,
+    get_project_standard_cross_section,
     merge_cross_section_design_by_round,
 )
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
@@ -34,6 +35,7 @@ from B07_DesignDetail.B07_DesignDetail_Engine_Template import (
     use_title_fields,
 )
 from B07_DesignDetail.B07_DesignDetail_Router_Support import (
+    CROSS_STANDARD_ID,
     LANDUSE_ID,
     LIDAR_ID,
     MASS_HAUL_ID,
@@ -307,6 +309,21 @@ async def get_design_drawing(
             if context is None:
                 return JSONResponse(status_code=404, content={"status": "error", "message": reason})
             source_design = await asyncio.to_thread(watershed_source, context)
+        elif drawing_id == CROSS_STANDARD_ID:
+            # 표준 횡단면도는 B06 「표준 횡단면 설정」 저장값으로 그린다(없으면 config 기본값).
+            pool = get_db_pool()
+            async with pool.acquire() as connection:
+                async with connection.cursor() as cursor:
+                    await cursor.execute(
+                        "SELECT company_id FROM projects WHERE id = %s AND deleted_at IS NULL",
+                        (str(project_id),),
+                    )
+                    row = await cursor.fetchone()
+                source_design = (
+                    await get_project_standard_cross_section(connection, int(row[0]), project_id)
+                    if row
+                    else None
+                )
         elif LIDAR_ID.fullmatch(drawing_id):
             # 라이다 계획평면도는 확정 DTM 격자로 음영기복 그림을 만들어 넘긴다.
             context, reason = await load_drainage_context(project_id)

B07_DesignDetail/B07_DesignDetail_Router_Support.py

@@ -47,66 +47,36 @@ from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
     plan_cross_sheets,
     section_block_size,
 )
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Standard import (
+    STANDARD_LABEL,
+    build_standard_cross_drawing,
+)
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Table import (
     QUANTITY_VALUE_KEYS,
 )
 from B07_DesignDetail.B07_DesignDetail_Engine_Template import add_title_fields
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    _BASIN_MAX_DISTANCE_M as _BASIN_MAX_DISTANCE_M,
-)
 
 # 유역도 배경·파일 입출력 조각은 700줄 제한으로 떼어냈다(2026-09-04).
 # 여기서 그대로 다시 내보내 호출부(`B07_DesignDetail_Router.py`)의 import 경로는 불변이다.
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (  # noqa: F401
-    CONTOUR_FILE as CONTOUR_FILE,
+    _BASIN_MAX_DISTANCE_M,
-)
+    CONTOUR_FILE,
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+    LANDUSE_ID,
-    LANDUSE_ID as LANDUSE_ID,
+    LIDAR_ID,
-)
+    PLAN_ID,
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+    STREAM_FILE,
-    LIDAR_ID as LIDAR_ID,
+    _basins_crs,
-)
+    _clip_segment,
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+    _geojson_features,
-    PLAN_ID as PLAN_ID,
+    _geojson_payload,
-)
+    _geometry_lines,
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+    _too_far_from_route,
-    STREAM_FILE as STREAM_FILE,
+    clip_line_to_box,
-)
+    landuse_source,
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+    lidar_source,
-    _basins_crs as _basins_crs,
+    plan_source,
-)
+    plan_stations,
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
+    watershed_source,
-    _clip_segment as _clip_segment,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    _geojson_features as _geojson_features,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    _geojson_payload as _geojson_payload,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    _geometry_lines as _geometry_lines,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    _too_far_from_route as _too_far_from_route,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    clip_line_to_box as clip_line_to_box,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    landuse_source as landuse_source,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    lidar_source as lidar_source,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    plan_source as plan_source,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    plan_stations as plan_stations,
-)
-from B07_DesignDetail.B07_DesignDetail_Router_Support_Basin import (
-    watershed_source as watershed_source,
 )
 from B07_DesignDetail.B07_DesignDetail_Router_Support_Io import (
     _cross_files,
@@ -132,13 +102,12 @@ _LONG_ID = re.compile(r"^longitudinal(?:_(\d+))?$")
 MASS_HAUL_ID = "mass_haul"
 WATERSHED_ID = "watershed"
 COVER_ID = "cover"
+# 표준 횡단면도 — 노선 자료가 아니라 B06 표준 횡단면 설정값으로 그리는 한 장.
+CROSS_STANDARD_ID = "cross_standard"
 
 # 아직 내용을 만들지 않은 도면 — 도각만 실어 연다(2026-09-01 사용자 지시).
 # 화면 순서(DRAWING_GROUPS)와 같은 이름을 쓴다.
-BLANK_DRAWINGS: tuple[tuple[str, str], ...] = (
+BLANK_DRAWINGS: tuple[tuple[str, str], ...] = (("blank_standard", "표준도"),)
-    ("blank_cross_standard", "표준 횡단면도"),
-    ("blank_standard", "표준도"),
-)
 BLANK_LABELS: dict[str, str] = dict(BLANK_DRAWINGS)
 
 
@@ -224,6 +193,7 @@ def _drawing_list(
     # 노선 전장 1장짜리 도면 — 자료가 없으면 여는 시점에 404로 알린다(목록에는 항상 둔다).
     for drawing_id, kind, label in (
         (COVER_ID, "cover", "표지"),
+        (CROSS_STANDARD_ID, "cross_standard", STANDARD_LABEL),
         (MASS_HAUL_ID, "mass_haul", "토적도(유토곡선)"),
         (WATERSHED_ID, "watershed", "유역도(배수 유역도)"),
     ):
@@ -449,7 +419,7 @@ def _read_drawing(
         # 포맷 버전이 다르면(테이블·레이어 구성 변경 전 저장본) 캐시를 버리고
         # 아래에서 원본 기준으로 재생성한다. 확정 상태도 무효로 응답해 재확정 유도.
         if saved.get("format") == DRAWING_FORMAT:
-            if drawing_id in (COVER_ID, MASS_HAUL_ID, WATERSHED_ID):
+            if drawing_id in (COVER_ID, MASS_HAUL_ID, WATERSHED_ID, CROSS_STANDARD_ID):
                 kind = drawing_id  # id와 kind가 같은 단장 도면
             elif PLAN_ID.fullmatch(drawing_id):
                 kind = "plan"
@@ -485,6 +455,17 @@ def _read_drawing(
             None,
         )
 
+    if drawing_id == CROSS_STANDARD_ID:
+        # stored_design = B06 표준 횡단면 설정값(라우터가 실어 준다). 없으면 config 기본값.
+        standard = stored_design if isinstance(stored_design, dict) else None
+        return (
+            "cross_standard",
+            STANDARD_LABEL,
+            build_standard_cross_drawing(drawing_id, STANDARD_LABEL, standard),
+            False,
+            None,
+        )
+
     if LIDAR_ID.fullmatch(drawing_id):
         # stored_design = lidar_source()가 만든 노선 + 지표면 음영기복 그림.
         if not isinstance(stored_design, dict):

B07_DesignDetail/B07_DesignDetail_Schema.py

@@ -19,6 +19,7 @@ class DesignDrawingItem(BaseModel):
         "plan",
         "landuse",
         "plan_lidar",
+        "cross_standard",
         "blank",
     ]
     label: str
@@ -52,6 +53,7 @@ class DesignDrawingResponse(BaseModel):
         "plan",
         "landuse",
         "plan_lidar",
+        "cross_standard",
         "blank",
     ]
     label: str

B07_DesignDetail/B07_DesignDetail_UI_Panels.ts

@@ -36,7 +36,7 @@ export const DRAWING_GROUPS: readonly {
   { label: "계획평면도(배치도)", idPrefix: "plan_layout" },
   { label: "계획평면도(라이다)", idPrefix: "plan_lidar" },
   { label: "종단면도", kind: "longitudinal" },
-  { label: "표준 횡단면도", blankId: "blank_cross_standard" },
+  { label: "표준 횡단면도", kind: "cross_standard" },
   { label: "횡단면도", kind: "cross" },
   { label: "토적도(유토곡선)", kind: "mass_haul" },
   { label: "유역도(배수 유역도)", kind: "watershed" },

config/config_system.py

@@ -178,6 +178,10 @@ DRAWING_SCALE_BASIN = 6000  # 유역도 평면 축척 분모 (실거리 1 m = 1/
 # 계획평면도·용지도 평면 축척 분모 — 지식DB 「설계제원_총괄」 측량·도면 기준 1/1,200.
 # 횡단면도와 같은 원칙: 축척은 줄이지 않고, 한 장에 안 들어가면 **장을 나눈다**.
 DRAWING_SCALE_PLAN = 1200
+# 표준 횡단면도 — 상세도라 지식DB에 지정 축척이 없다. 본 그림 1/50, 측구 부분확대도
+# 1/10 (2026-09-04). 노폭 4 m 기준 본 그림이 A1 작도영역에 여유 있게 든다.
+DRAWING_SCALE_CROSS_STANDARD = 50
+DRAWING_SCALE_DITCH_DETAIL = 10
 
 # 시스템 리소스 로그 (루트 log 폴더에 단일 파일, 1개월 보관)
 LOG_BASE_DIR = os.path.join(os.path.dirname(os.path.dirname(__file__)), "log")