Merge remote-tracking branch 'origin/dev' into sub_laptop_6

resources/tester/helper_173_6_half_width.cjs

@@ -17,6 +17,7 @@ const STUBS = {
     showLoadingOverlay: () => calls.overlay++,
     hideLoadingOverlay: () => {},
     showToast: () => {},
+    showConfirmDialog: async () => true, // 다시 만들기 확인창(446) — 이 시험은 늘 확인
   },
   "./B06_Section_Api_Fetch": {
     regenerateSections: async (_p, _r, width) => calls.regenerate.push(width),

resources/tester/helper_266_card_toggle.mjs

@@ -95,15 +95,17 @@ async function toggles(projectId, shift) {
   const steps = [];
   const run = async (tag) => {
     const updated = [];
+    let calls = 0; // 받는 쪽 = 카드 다시 그림 + 종단 · 유토 다시 그림(design_shared) — 한 걸음에 한 번
     const out = await m.refreshSavedCross(
       { projectId, routeId: R, detail, edits: EDITS, alignment },
       stations,
-      (rows) => updated.push(...rows),
+      (rows) => (calls++, updated.push(...rows)),
     );
     steps.push({
       tag,
       out: out ? Object.keys(out.byKey).length : null,
       updated,
+      calls,
       ...pick(target.design),
     });
   };
@@ -126,6 +128,9 @@ async function toggles(projectId, shift) {
     m.writeCrossDesignChoice(projectId, R, target.chainage_m, { ...choice });
     await run(tag);
   }
+  // 사면 이동 한 걸음(B06 ◀▶ 0.1 m · 깎기 쪽 · 441 · 요구 268-4)
+  m.writeShoulderExtend(projectId, R, target.chainage_m, job.mode.split("_")[0], 0.1);
+  await run("slope");
   return { target: target.chainage_m, steps };
 }
 

resources/tester/helper_266_card_toggle_entry.ts

@@ -1,5 +1,8 @@
 /* PLAN 439 시험 묶음 진입점 — 저장 노선 cross 차례(카드 단추 → 다시 셈 · 측점 어긋남) · 진짜 모듈 · vite ssr. */
 export { refreshSavedCross } from "../../A00_Common/design/design_shared";
-export { writeCrossDesignChoice } from "../../B06_Section/B06_Section_Cross_Design_Session";
+export {
+  writeCrossDesignChoice,
+  writeShoulderExtend,
+} from "../../B06_Section/B06_Section_Cross_Design_Session";
 export { rememberRockBoundaryDefault } from "../../B06_Section/B06_Section_UI_Standard_Panel";
 export { writeState } from "../../A00_Common/b_page_state";

resources/tester/helper_344_3_pipeline_stations.cjs

@@ -78,4 +78,24 @@ out.move = {
   same: after.map((s) => byKey.get(s.key) === s),
   empty: run(null, null, null, null),
 };
+// 441 — 초안 없는 저장 노선 = 저장 스냅 설정 따름 · 초안이 있으면 초안 값(스냅 case = cases[1])
+const snapCase = job.cases[1];
+const savedRun = (route, saved) =>
+  stage
+    .createStationsStage({ types: () => job.types, saved: () => saved })({
+      generation: 1,
+      range: null,
+      signal: new AbortController().signal,
+      inputs: { route, pipes: job.pipes, structures: job.structures },
+      out: { route: { line: snapCase.line, curves: snapCase.curves, chainage: [], lengthM: 0 } },
+      before: {},
+      prev: null,
+    })
+    .map((s) => s.chainageM);
+out.savedSnap = {
+  saved: savedRun(null, { station_snap: true, station_snap_step: null }),
+  savedOff: savedRun(null, { station_snap: false }),
+  noPlan: savedRun(null, null),
+  draftWins: savedRun({ stationSnap: false }, { station_snap: true }),
+};
 process.stdout.write(JSON.stringify(out));

resources/tester/helper_346_3_route_save.cjs

@@ -61,7 +61,10 @@ const STUBS = {
     fetchDetailPipePoints: async () => (calls.push("pipes"), { pipe_points: [] }),
   },
   "../A00_Common/design/design_pipe_ids": { pipeChainageOf: () => null },
-  "./B05_Profile_Api_Fetch": { clearRouteLatestCache: () => calls.push("latest:clear") },
+  "./B05_Profile_Api_Fetch": {
+    clearRouteLatestCache: () => calls.push("latest:clear"),
+    flushUphillOverrides: async () => calls.push("uphill"), // 옮긴 뒤 · 횡단 패치 앞(443-2)
+  },
   "./B05_Profile_Api_Replan": {
     replanRoute: async (_p, body) => {
       bodies.push(JSON.parse(JSON.stringify(body)));

resources/tester/helper_390_5_snap_step_ops.cjs

@@ -128,6 +128,82 @@ const drag = Object.fromEntries(
   }),
 );
 
+// ④ 끌기 훑기(441) — 편집 창 끌기 차례(`_Pointer`) 그대로: 하한 막힘 · 미리보기 측점 밖이 누를 때보다 늘면
+//    그 걸음 되돌림 · 놓을 때 정본 맞춤(`applyEdit`). 측점 No. · IP 셋 × 12 방향 × 3 거리 · 고정 R(곡선표 반경 못박음).
+const edits = loadTs(path.join(LOGIC, "B05_Profile_UI_RouteEdit_Edits.ts"));
+const copy = (c) => ({
+  ...c,
+  planned: c.planned.map(([x, y]) => [x, y]),
+  curveRadius: [...c.curveRadius],
+});
+function sweep(fixedR) {
+  const start = columns(fit.fitCurveStations(columns(ROUTE), LIMITS, 1));
+  if (fixedR)
+    start.curveRadius = edits
+      .rebuildLine(copy(start), LIMITS)
+      .nodes.map((n) => (n.radius_m === null ? null : Math.round(n.radius_m * 100) / 100));
+  const floor = (built) =>
+    edits.curveShortfalls(built.nodes, LIMITS.limitRadiusM, LIMITS.limitArcM);
+  const off = (built) => fit.offStationCount(built.vertices, built.curves, INTERVAL);
+  const tally = { drags: 0, released: 0, offAfter: 0, strayed: 0, worst: [] };
+  for (const K of [2, 3, 4])
+    for (let deg = 0; deg < 360; deg += 30)
+      for (const reach of [9, 17, 26]) {
+        const hist = copy(start);
+        let st = copy(hist);
+        let built = edits.rebuildLine(st, LIMITS);
+        const offBefore = off(built);
+        let raw = null;
+        let movedOnce = false;
+        const preview = () => {
+          raw = st.planned.map(([x, y]) => [x, y]);
+          st = { ...st, planned: fit.fitDrag(st, hist.planned, K, LIMITS) };
+          built = edits.rebuildLine(st, LIMITS);
+        };
+        const p0 = hist.planned[K];
+        for (let t = 0.5; t <= reach + 1e-9; t += 0.5) {
+          if (raw) raw.forEach((v, i) => (st.planned[i] = v));
+          built = edits.rebuildLine(st, LIMITS);
+          const before = floor(built);
+          const previous = st.planned[K];
+          st.planned[K] = [
+            p0[0] + Math.cos((deg * Math.PI) / 180) * t,
+            p0[1] + Math.sin((deg * Math.PI) / 180) * t,
+          ];
+          built = edits.rebuildLine(st, LIMITS);
+          if (edits.shortfallCrossed(before, floor(built))) {
+            st.planned[K] = previous;
+            preview();
+            continue;
+          }
+          preview();
+          if (off(built) > offBefore) {
+            raw.forEach((v, i) => (st.planned[i] = v));
+            st.planned[K] = previous;
+            preview();
+            tally.strayed += 1;
+            continue;
+          }
+          movedOnce = true;
+        }
+        tally.drags += 1;
+        if (!movedOnce) continue;
+        built = edits.rebuildLine(st, LIMITS);
+        if (edits.floorStop(hist, st.planned, built.nodes, LIMITS)) continue;
+        const from = fit.fitStart(hist, st);
+        st = { ...st, planned: fit.fitCurveStations(st, LIMITS, from) };
+        built = edits.rebuildLine(st, LIMITS);
+        tally.released += 1;
+        const left = fit.offStationMcs(built.vertices, built.curves, INTERVAL);
+        if (left.length) {
+          tally.offAfter += 1;
+          if (tally.worst.length < 5) tally.worst.push({ K, deg, reach, mc: left });
+        }
+      }
+  return tally;
+}
+const swept = { auto: sweep(false), fixed: sweep(true) };
+
 // ③ MC 측점 값 · 눈금 글
 const input = JSON.parse(process.argv[2] || '{"grid":[],"spans":[]}');
 const snapped = Object.fromEntries(
@@ -147,5 +223,12 @@ const labels = {
 };
 
 console.log(
-  JSON.stringify({ keys, drag, snapped, labels, scale: [0.1, 1, 10, null].map(frame.mcScale) }),
+  JSON.stringify({
+    keys,
+    drag,
+    swept,
+    snapped,
+    labels,
+    scale: [0.1, 1, 10, null].map(frame.mcScale),
+  }),
 );

resources/tester/helper_443_2_entry.ts

@@ -0,0 +1,5 @@
+/* 443-2 시험 묶음 진입점 — 노선 바뀐 [저장] 때 상단측(uphill)을 측점 열쇠로 새 측점에 옮김.
+ * Node 헬퍼 = helper_443_2_uphill_carry.mjs · 짝 = test_443_2_uphill_carry.py.
+ */
+export { carryChainageStates, useStationKeyList } from "../../B06_Section/B06_Section_Station_Keys";
+export { readState, writeState } from "../../A00_Common/b_page_state";

resources/tester/helper_443_2_uphill_carry.mjs

@@ -0,0 +1,61 @@
+/* 443-2 헬퍼 — vite ssr 로 묶은 진짜 모듈(helper_443_2_entry.ts)을 부르고 결과를 JSON 한 벌로.
+ *   node helper_443_2_uphill_carry.mjs <묶음.mjs>
+ */
+import { pathToFileURL } from "node:url";
+
+const store = () => {
+  const m = new Map();
+  return {
+    getItem: (k) => (m.has(k) ? m.get(k) : null),
+    setItem: (k, v) => m.set(k, String(v)),
+    removeItem: (k) => m.delete(k),
+    key: (i) => [...m.keys()][i] ?? null,
+    get length() {
+      return m.size;
+    },
+    clear: () => m.clear(),
+  };
+};
+globalThis.window = globalThis;
+globalThis.sessionStorage = store();
+globalThis.localStorage = store();
+const any = new Proxy(function () {}, {
+  get: (_t, k) => (k === Symbol.toPrimitive ? () => 0 : any),
+  apply: () => any,
+  construct: () => any,
+});
+globalThis.document = any;
+globalThis.requestAnimationFrame = (run) => setTimeout(run, 0);
+
+const m = await import(pathToFileURL(process.argv[2]).href);
+const P = "p443";
+const grid = (pairs) => pairs.map(([key, chainageM]) => ({ key, chainageM }));
+// 옛 노선 = 20 m 일반측점 넷 · 새 노선 = 같은 번호가 밀림(21.5 · 43) · grid:3(60 m) 사라짐
+m.useStationKeyList(
+  P,
+  7,
+  grid([
+    ["end:BP", 0],
+    ["grid:1", 20],
+    ["grid:2", 40],
+    ["grid:3", 60],
+  ]),
+);
+m.useStationKeyList(
+  P,
+  8,
+  grid([
+    ["end:BP", 0],
+    ["grid:1", 21.5],
+    ["grid:2", 43],
+  ]),
+);
+m.writeState("uphill", { "20.000": "right", "40.000": "left", "60.000": "right" }, P);
+const outside = m.carryChainageStates(P, 7, 8);
+const moved = m.readState("uphill", P);
+// 세션이 없으면 그대로(빈 칸 안 만듦)
+m.writeState("uphill", null, P);
+const outsideEmpty = m.carryChainageStates(P, 7, 8);
+process.stdout.write(
+  JSON.stringify({ outside, moved, outsideEmpty, empty: m.readState("uphill", P) }),
+);

resources/tester/helper_443_save_stops.cjs

@@ -0,0 +1,110 @@
+/* PLAN 443 단위검증 헬퍼 — 저장 누락 ① (H6 · M3 · M6).
+ *   H6 구조물 저장 실패(409 · 그 밖) = 던짐 · 초안 남음 · 다음 [저장]이 줄에 안 막힘
+ *   M3 상단측 차례 성공 = uphill 세션 비움 · 실패 = 그대로
+ *   M6 확정 응답 failed_parts = 던짐(그 차례에서 멈춤)
+ * TS 를 그 자리에서 트랜스파일해 Node 로 돌림 · 서버 창구는 가짜. 짝 = `test_443_save_stops.py`. */
+const fs = require("fs");
+const path = require("path");
+const ts = require(path.join(__dirname, "..", "..", "config", "node_modules", "typescript"));
+
+const ROOT = path.join(__dirname, "..", "..");
+globalThis.window = { setTimeout, clearTimeout };
+
+const anything = () =>
+  new Proxy({}, { get: (_target, key) => (key === "__esModule" ? false : () => undefined) });
+
+function load(file, stubs) {
+  const js = ts.transpileModule(fs.readFileSync(file, "utf8"), {
+    compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
+  }).outputText;
+  const box = { exports: {} };
+  new Function("exports", "module", "require", js)(box.exports, box, (r) => stubs[r] ?? anything());
+  return box.exports;
+}
+
+const settle = (promise) =>
+  promise.then(
+    () => "ok",
+    (error) => String(error.message),
+  );
+
+async function run() {
+  const out = {};
+
+  // ── H6 구조물 ──
+  class StructureConflictError extends Error {}
+  let pending = [{ structure_id: "s1" }];
+  let mode = "conflict";
+  const puts = [];
+  const bridgeMod = load(path.join(ROOT, "B05_Profile", "B05_Profile_UI_Page_Structures.ts"), {
+    "./B05_Profile_Api_Structures": {
+      StructureConflictError,
+      fetchStructures: async () => ({ revision: 3, structures: [] }),
+      saveStructures: async (_p, revision, list) => {
+        puts.push(revision);
+        if (mode === "conflict") throw new StructureConflictError("409");
+        if (mode === "boom") throw new Error("서버 500");
+        return { revision: revision + 1 };
+      },
+      readPendingStructures: () => pending,
+      writePendingStructures: (_p, next) => (pending = next),
+      definitionStale: () => false,
+      staleDefinitionNotice: () => null,
+    },
+    "@ui/ui_template_elements": { showToast: () => undefined },
+  });
+  const quiet = new Proxy({}, { get: () => () => undefined });
+  const bridge = bridgeMod.createStructuresBridge({
+    projectId: "p1",
+    panel: () => ({ structures: quiet, values: () => ({}) }),
+    profilePanel: () => quiet,
+    renderStationLines: () => undefined,
+    isRestoring: () => false,
+  });
+  out.conflict = await settle(bridge.saveStructuresIfDirty());
+  out.pendingAfterConflict = pending;
+  mode = "boom";
+  out.boom = await settle(bridge.saveStructuresIfDirty()); // 앞 실패에 줄이 안 막힘
+  out.pendingAfterBoom = pending;
+  mode = "ok";
+  out.ok = await settle(bridge.saveStructuresIfDirty());
+  out.pendingAfterOk = pending;
+  out.puts = puts;
+
+  // ── M3 · M6 상단측 · 확정 하위 ──
+  const state = new Map();
+  let reply = {};
+  const bodies = [];
+  globalThis.fetch = async (_url, init) => {
+    bodies.push(JSON.parse(init.body));
+    return { ok: true, json: async () => reply };
+  };
+  const api = load(path.join(ROOT, "B05_Profile", "B05_Profile_Api_Fetch.ts"), {
+    "../A00_Common/b_page_state": {
+      readState: (name, p) => state.get(`${name}:${p}`) ?? null,
+      writeState: (name, value, p) => state.set(`${name}:${p}`, value),
+      clearState: (name, p) => state.delete(`${name}:${p}`),
+    },
+    "@config/config_frontend": { API_BASE_URL: "", API_TIMEOUT_MS: 1000 },
+  });
+  state.set("uphill:p1", { "40.000": "right" });
+  reply = { failed_parts: ["상단측 병합"] };
+  out.flushFailed = await settle(api.flushUphillOverrides("p1"));
+  out.uphillAfterFail = state.get("uphill:p1") ?? null;
+  reply = { failed_parts: [] };
+  out.flushOk = await settle(api.flushUphillOverrides("p1"));
+  out.uphillAfterOk = state.get("uphill:p1") ?? null;
+  out.sentAgain = await settle(api.flushUphillOverrides("p1")); // 비었으니 안 보냄
+  out.bodies = bodies;
+  reply = { failed_parts: ["비정규 측점 횡단"] };
+  out.partsFailed = await settle(api.saveRouteParts("p1", { irregular_stations: [] }));
+  return out;
+}
+
+run().then(
+  (out) => process.stdout.write(JSON.stringify(out)),
+  (error) => {
+    process.stderr.write(String(error.stack ?? error));
+    process.exit(1);
+  },
+);

resources/tester/helper_444_culvertopt.mjs

@@ -0,0 +1,145 @@
+/* 444 헬퍼 — 관 구간값 예약(culvertopt)이 관 옮김을 따라가고 · 못 맞춘 값은 버리고 · 두 번째 [저장]이 안 덮음.
+ *   node helper_444_culvertopt.mjs <묶음.mjs>
+ * 묶음 = 444 진입점(`helper_444_entry.ts` · 346-2 묶음 + 내보내기 · vite ssr 진짜 모듈) · 표준출력 JSON 한 벌.
+ * 짝 = test_444_culvertopt_single_draft.py · 틀 = helper_415_swap.mjs(415-3).
+ */
+import { pathToFileURL } from "node:url";
+
+const store = () => {
+  const m = new Map();
+  return {
+    getItem: (k) => (m.has(k) ? m.get(k) : null),
+    setItem: (k, v) => m.set(k, String(v)),
+    removeItem: (k) => m.delete(k),
+    key: (i) => [...m.keys()][i] ?? null,
+    get length() {
+      return m.size;
+    },
+    clear: () => m.clear(),
+  };
+};
+globalThis.window = globalThis;
+globalThis.sessionStorage = store();
+globalThis.localStorage = store();
+const any = new Proxy(function () {}, {
+  get: (_t, k) => (k === Symbol.toPrimitive ? () => 0 : any),
+  apply: () => any,
+  construct: () => any,
+});
+globalThis.document = any;
+globalThis.requestAnimationFrame = (run) => setTimeout(run, 0);
+globalThis.__toasts = [];
+
+/* 관 정본(서버) — GET 은 지금 관 · PUT 은 받은 몸통으로 바꿈 */
+let saved = [];
+const puts = [];
+globalThis.fetch = async (url, init = {}) => {
+  if (String(url).includes("/drainage/pipe-points") && init.method === "PUT") {
+    const points = JSON.parse(init.body).points;
+    puts.push(points);
+    saved = points.map((point) => ({ ...point, lonlat: [0, 0] }));
+  }
+  return { ok: true, status: 200, json: async () => ({ pipe_points: saved, basins: [] }) };
+};
+
+const m = await import(pathToFileURL(process.argv[2]).href);
+const P = "p444";
+const R = 3;
+const out = {};
+
+const section = (chainage_m, kind, extra = {}) => ({
+  station_id: `station_${String(Math.round(chainage_m * 1000)).padStart(12, "0")}`,
+  chainage_m,
+  label: "",
+  kind,
+  center_z: 100,
+  azimuth_deg: 90,
+  center_x: chainage_m,
+  center_y: 0,
+  frame: { left_xy: [0, 1] },
+  samples: [{ offset_m: 0, elevation_m: 100, valid: true }],
+  design: { design_elevation_m: 101 },
+  ...extra,
+});
+const detail = () => ({
+  longitudinal: {
+    length_m: 100,
+    stations: [],
+    profile_alignment: { policy: { station_interval_m: 20 } },
+  },
+  cross_sections: [
+    section(0, "bp"),
+    section(20, "regular"),
+    section(40, "regular"),
+    section(45.054, "irregular", { structure: "세월교", culvert: {} }),
+    section(60, "regular"),
+    section(80, "regular"),
+    section(100, "ep"),
+  ],
+});
+const station = (key, chainageM, kind, id = null) => ({
+  key,
+  chainageM,
+  x: chainageM,
+  y: 0,
+  azimuthDeg: 90,
+  left: [0, 1],
+  kind,
+  id,
+  ground: { centerZ: 99, left: [{ offsetM: 0.5, z: 99.1 }], right: [{ offsetM: 0.5, z: 98.9 }] },
+  planRadiusM: null,
+  curveOuterSide: null,
+  curveWideningM: null,
+});
+const list = (pipeAt) =>
+  [
+    station("end:BP", 0, "end"),
+    station("grid:1", 20, "grid"),
+    station("grid:2", 40, "grid"),
+    station("pipe:pipe-s1", pipeAt, "pipe", "pipe-s1"),
+    station("grid:3", 60, "grid"),
+    station("grid:4", 80, "grid"),
+    station("end:EP", 100, "end"),
+  ].sort((a, b) => a.chainageM - b.chainageM);
+const key = `aislo:draft:culvertopt:${P}:${R}`;
+
+/* 1. 관 5 m 옮김 — 옛 세션 구간값 예약도 관 새 자리로(조정창 맵 없이 · 415-3 과 같은 길) */
+m.writeState("section-detail", detail(), P, R);
+m.writeState("pipe-ids", { next: 2, ids: [{ id: "pipe-s1", at: 45.054 }] }, P);
+await m.loadSectionDetail(P, R);
+m.writeState("culvertopt", { 45.05: { ford_width_m: 4 } }, P, R);
+const stop = m.followSwaps(
+  P,
+  () => R,
+  { visible: () => true },
+  async () => undefined,
+);
+m.writeState("pipe-ids", { next: 2, ids: [{ id: "pipe-s1", at: 50 }] }, P);
+m.useDesignStore(P, null).set("stations", list(50));
+await new Promise((resolve) => setTimeout(resolve, 30));
+out.moved = m.readState("culvertopt", P, R);
+stop();
+
+/* 2. [저장] 두 번 — 첫 번째는 관 새 자리에 얹고 세션 비움 · 두 번째는 안 보냄(값 그대로) */
+saved = [
+  { id: "p5000", chainage_m: 50, source: "stream", facility: "ford", options: { ford_width_m: 3 } },
+];
+await m.flushCulvertOptions(P, key);
+out.firstSave = {
+  puts: puts.length,
+  width: saved[0].options.ford_width_m,
+  left: sessionStorage.getItem(key),
+};
+await m.flushCulvertOptions(P, key);
+out.secondSave = { puts: puts.length, width: saved[0].options.ford_width_m };
+
+/* 3. 못 맞춘 값(지운 · 옮긴 관 옛 자리) — 다른 관에 안 얹고 버림 */
+m.writeState("culvertopt", { "30.00": { ford_width_m: 9 } }, P, R);
+await m.flushCulvertOptions(P, key);
+out.unmatched = {
+  puts: puts.length,
+  width: saved[0].options.ford_width_m,
+  left: sessionStorage.getItem(key),
+};
+
+process.stdout.write(JSON.stringify(out));

resources/tester/helper_444_entry.ts

@@ -0,0 +1,3 @@
+/* 444 시험 묶음 진입점 — 346-2 갈아끼움 묶음 + 관 구간값 예약 내보내기(진짜 모듈 · vite ssr). */
+export * from "./helper_346_2_swap_entry";
+export { flushCulvertOptions } from "../../B06_Section/B06_Section_Api_Culvert_Options";

resources/tester/helper_446_widen_confirm.cjs

@@ -0,0 +1,57 @@
+/* 카드 폭 넘김 다시 만들기 확인창(PLAN 446) 단위검증 헬퍼 — `createSampleWidener` 를 트랜스파일해 돌린다.
+ * 취소 = 재생성 없음 · 오버레이 셈 그대로 · 확인 = 재생성 한 번 · 오버레이 올림 · 내림 짝. 결과는 JSON 한 벌.
+ * 짝 = `test_446_widen_carry.py`.
+ */
+const fs = require("fs");
+const path = require("path");
+const ts = require(path.join(__dirname, "..", "..", "config", "node_modules", "typescript"));
+
+const ROOT = path.join(__dirname, "..", "..");
+const calls = { regenerate: [], overlay: 0, asked: [] };
+let answer = false;
+const STUBS = {
+  "@ui/ui_template_locale": {
+    currentLanguageIndex: 0,
+    ui_locales: new Proxy({}, { get: (_t, key) => [`${String(key)} {width}/{sampled}`] }),
+  },
+  "@ui/ui_template_elements": {
+    showLoadingOverlay: () => calls.overlay++,
+    hideLoadingOverlay: () => calls.overlay--,
+    showToast: () => {},
+    showConfirmDialog: async (message) => {
+      calls.asked.push(message);
+      return answer;
+    },
+  },
+  "./B06_Section_Api_Fetch": {
+    regenerateSections: async (_p, _r, width) => calls.regenerate.push(width),
+  },
+  "./B06_Section_Section_Store": { loadSectionDetail: async () => ({ cross_sections: [] }) },
+};
+
+const file = path.join(ROOT, "B06_Section", "B06_Section_UI_Page_Common.ts");
+const js = ts.transpileModule(fs.readFileSync(file, "utf8"), {
+  compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
+}).outputText;
+const box = { exports: {} };
+new Function("exports", "module", "require", js)(box.exports, box, (r) => STUBS[r]);
+
+(async () => {
+  const widen = box.exports.createSampleWidener({
+    target: () => ({ projectId: "p", routeId: 1 }),
+    sampledHalfWidth: () => 20,
+    applyDetail: () => {},
+  });
+  const out = {};
+  out.within = await widen(15); // 표본 안 = 묻지 않음
+  out.withinAsked = calls.asked.length;
+  out.cancel = await widen(21);
+  out.cancelCalls = calls.regenerate.length;
+  out.cancelOverlay = calls.overlay;
+  answer = true;
+  out.ok = await widen(21);
+  out.okCalls = [...calls.regenerate];
+  out.okOverlay = calls.overlay;
+  out.asked = calls.asked;
+  process.stdout.write(JSON.stringify(out));
+})();

resources/tester/test_266_card_toggle_mismatch.py

@@ -4,6 +4,7 @@
   - 저장 노선 cross 차례(`refreshSavedCross`) = 카드 자료(상세 설계)를 **늘** 다시 셈 —
     복합경사 · 측구 · 지반 단추마다 그 측점 설계선 · 면적이 바뀜.
   - 묶음 측점 = 상세 측점이면 돌려줌 · 1 mm 넘게 다르면 null(묶음 엔진) — 그래도 카드 자료는 고침.
+  - 사면 이동 한 걸음도 같음 · 걸음마다 받는 쪽(카드 · 종단 · 유토 다시 그림) 한 번(441 · 요구 268-2 · 4).
   - 서버 폴백(선형 저장분 없음)에도 카드 선택이 실림(열쇠 = 측점 자리) · 서버는 저장분 위에 얹음.
 짝: `helper_266_card_toggle.mjs` · 진입점 `helper_266_card_toggle_entry.ts` ·
 지형 · 노선 틀 = `test_346_2_pipeline_cross_page.py`.
@@ -99,7 +100,8 @@ def _check_toggles(case: dict, returned) -> None:
     steps = {step["tag"]: step for step in case["steps"]}
     assert steps["open"]["cut"] > 0.5  # 깎기 측점
     before = steps["open"]
-    for tag in ("two_stage", "ditch_off", "soil"):
+    assert all(step["calls"] == 1 for step in case["steps"])  # 걸음마다 다시 그림 한 번(441)
+    for tag in ("two_stage", "ditch_off", "soil", "slope"):
         step = steps[tag]
         assert case["target"] in step["updated"], tag  # 카드 다시 그림 대상
         assert step["line"] != before["line"], tag  # 카드 설계선 바뀜

resources/tester/test_344_3_pipeline_stations_mirror.py

@@ -264,6 +264,17 @@ def test_스냅_측점은_원래_격자_번호(r):
     assert moved and all(abs(a - b) <= 10 for a, b in moved.values())
 
 
+def test_초안_없으면_저장_스냅_따름(r):
+    """441 — 초안 없는 저장 노선 측점 단계 = 저장 station_snap · 초안이 있으면 초안 값."""
+    snapped = [s["chainageM"] for s in r["cases"][1]]
+    plain = [s["chainageM"] for s in r["cases"][0]]
+    assert snapped != plain
+    got = r["savedSnap"]
+    assert got["saved"] == snapped
+    assert got["savedOff"] == plain and got["noPlan"] == plain
+    assert got["draftWins"] == plain
+
+
 def test_노선_한_점_옮김_앞_구간_열쇠_그대로(r):
     m = r["move"]
     from_m = _first_changed_m()

resources/tester/test_346_3_route_save_screen.py

@@ -82,6 +82,7 @@ def test_초안_넘김_차례(out):
         "pipes",  # 관 열쇠 → 새 자리(서버가 옮긴 관)
         "carry:7->9:quiet",
         "carryAt:7->9",  # 417 — 조절 · 측점 폭 · 상세 표도 새 노선 측점으로
+        "uphill",  # 443-2 — 상단측도 새 측점으로 옮긴 뒤 · 횡단 패치 앞
         "adjusts:9",
         "edits:9",  # 옮긴 고침을 새 상세 설계 칸에 → 같은 [저장] 횡단 패치
         "crossSave:9",

resources/tester/test_356_b06_card_center.py

@@ -78,7 +78,9 @@ def test_중심점_좌우_없음_위아래만(ts):
 
 def test_배선_걷음():
     order = (B06 / "B06_Section_UI_Cross_Pick_Order.ts").read_text(encoding="utf-8")
-    assert "layer.append(...surfaces, ...edges, ...lines, ...centers);" in order
+    assert (
+        "layer.append(...rocks, ...surfaces, ...edges, ...lines, ...centers);" in order
+    )  # 암 = 판정면 아래(440)
     for gone in (
         ROOT / "B05_Profile" / "B05_Profile_UI_RouteEdit_Shift.ts",
         ROOT / "B05_Profile" / "logic" / "B05_Profile_RouteShift.ts",

resources/tester/test_390_5_snap_step_ops.py

@@ -80,7 +80,17 @@ def test_끄는_동안_MC_가_간격_배수(got, step) -> None:
     drag = got["drag"][step]
     assert drag["off"] == 0
     assert max(drag["residues"]) <= drag["tol"]
-    assert drag["dragMoved"] <= float(step) / 2 + 1e-6  # 끈 IP 는 접선 따라 ±간격/2 안만
+    assert drag["dragMoved"] <= float(step) + 1e-6  # 끈 IP 는 접선 따라 ±간격 안만(441)
+
+
+@pytest.mark.parametrize("mode", ["auto", "fixed"])
+def test_끌기_훑기_놓은_뒤_측점_밖_0(got, mode) -> None:
+    """441 — 측점 No. 끌기(IP 셋 × 12 방향 × 3 거리) · 놓은 뒤 MC 가 다 측점 위 · 맞춤이 늘 닿음
+    (반 간격 한도면 18+9 ~ 19+1 에서 못 맞춰 막힘 걸음이 생김)."""
+    swept = got["swept"][mode]
+    assert swept["drags"] == 108 and swept["released"] > 0
+    assert swept["offAfter"] == 0, swept["worst"]
+    assert swept["strayed"] == 0
 
 
 @pytest.mark.parametrize("step", ["0.1", "1", "10", "20"])
@@ -101,6 +111,12 @@ def test_끌기_방향키_편집기_이음() -> None:
     # 하한 검사는 맞추기 전 노선으로(맞춤이 IP 를 ±간격/2 밀어 10 m · 측점 No. 에서 헛걸림)
     assert "dragRaw.forEach((vertex, index) => (state.planned[index] = vertex))" in pointer
     assert "now.raw.forEach((vertex, index) => (state.planned[index] = vertex))" in keys
+    # 미리보기 측점 밖이 누를 때보다 늘면 그 걸음 되돌림 · 막힘 검사 뒤에 옮김 표시(441 · 433-14)
+    assert "params.offStation() > dragOff" in pointer and "params.offStation() > now.off" in keys
+    move = pointer[pointer.index("const previous = state.planned[dragNode];") :]
+    assert move.index("shortfallCrossed(") < move.index("params.offStation() > dragOff")
+    assert move.index("params.offStation() > dragOff") < move.index("dragMoved = true;")
+    assert "offStation: () => (stationSnap ? fit.offStationCount(" in edit
     assert edit.count("\n") <= 695
 
 
@@ -193,6 +209,9 @@ def test_서버_측점_셈이_저장_간격을_씀() -> None:
     page = (design / "design_pipeline_page.ts").read_text(encoding="utf-8")
     assert "stationSnapStep: routePlan.station_snap_step" in page
     stage = (design / "logic" / "design_pipeline_stations.ts").read_text(encoding="utf-8")
-    assert "stationSnapStep: ctx.inputs.route?.stationSnapStep" in stage
+    assert "...snapOptions(ctx.inputs.route, saved?.())" in stage  # 초안 · 없으면 저장 노선(441)
+    assert "stationSnapStep: draft.stationSnapStep" in stage
+    assert "stationSnapStep: saved?.station_snap_step" in stage
+    assert "saved: () => plan" in page and "...snapOptions(inputs.route, plan)" in page
     apply = (B05 / "B05_Profile_UI_RouteEdit_Apply.ts").read_text(encoding="utf-8")
     assert "stationSnap: true, stationSnapStep: null" in apply  # 추천 = 측점 No.

resources/tester/test_440_cross_draft_pick.py

@@ -4,6 +4,7 @@
   (갈아끼운 캐시)에 모든 카드 번호가 있음 · 찾기 넷(카드 고름 · 목록 → 카드 · 넘김 · 풀기)은 지금 그린 상세.
 ② 평면 패널 빈 곳 누름 = 평면 마커가 고른 것만 풂(`test_409` 의 deselectOther · deselectOwn).
 ③ 바뀜 신호에서 B06 목록도 자리가 바뀌었으면 다시 실음.
+④ 암 경계선 판정(굵은 투명 선)은 구조물 판정면 아래 — 구조물 아랫부분 누름이 구조물을 고름.
 TS 셈은 `helper_440_draft_card_ids.cjs`.
 
     ./venv/Scripts/python.exe -m pytest resources/tester/test_440_cross_draft_pick.py -q
@@ -77,3 +78,12 @@ def test_평면_빈_곳_누름은_마커_고름만() -> None:
     marks = _read("B05_Profile", "B05_Profile_UI_RouteEdit_StructureMarks.ts")
     assert "deselect: () => planMarks(canvas)?.picked === ownPick && deselect()," in marks
     assert "ownPick = mark.id;" in marks
+
+
+def test_암_경계_판정은_구조물_판정면_아래() -> None:
+    order = _read("B06_Section", "B06_Section_UI_Cross_Pick_Order.ts")
+    assert "layer.append(...rocks, ...surfaces, ...edges, ...lines, ...centers);" in order
+    lines = order[order.index("const lines = kids.filter(") :]
+    assert "!el.classList.contains(ROCK_HIT_CLASS)" in lines[: lines.index(");")]
+    pick = _read("B06_Section", "B06_Section_UI_Cross_Design_Pick.ts")
+    assert 'export const ROCK_HIT_CLASS = "b06-chart__rock-hit";' in pick

resources/tester/test_443_2_uphill_carry.py

@@ -0,0 +1,77 @@
+"""PLAN 443-2 — 노선 바꾼 [저장]의 상단측(uphill).
+
+- 옛 누가거리 열쇠 상단측 = 측점 열쇠(옮김 목록 `ROUTE_CARRY_STATES` · 415 · 417 규칙)로 새 노선 측점에.
+- 새 노선에 같은 측점이 없으면 뺌 · 수를 돌려줌(「노선 밖 고침」 · 상단측 알림).
+- 저장 한 줄기: 노선을 저장했으면 상단측 차례는 건너뛰고 `carryAfterRouteSave` 가 옮긴 뒤 · 횡단 패치 앞에 보냄.
+Node 헬퍼 `helper_443_2_uphill_carry.mjs` 가 vite ssr 로 묶은 진짜 모듈(`helper_443_2_entry.ts`)을 부름.
+
+./venv/Scripts/python.exe -m pytest resources/tester/test_443_2_uphill_carry.py -q
+"""
+
+import json
+import subprocess
+from pathlib import Path
+
+import pytest
+
+HERE = Path(__file__).resolve().parent
+ROOT = HERE.parents[1]
+
+
+@pytest.fixture(scope="module")
+def out(tmp_path_factory):
+    work = tmp_path_factory.mktemp("b443_2")
+    build = subprocess.run(
+        [
+            "node",
+            str(ROOT / "config" / "node_modules" / "vite" / "bin" / "vite.js"),
+            "build",
+            "--configLoader",
+            "runner",
+            "--ssr",
+            "../resources/tester/helper_443_2_entry.ts",
+            "--outDir",
+            str(work),
+            "--logLevel",
+            "error",
+        ],
+        cwd=ROOT,
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=300,
+    )
+    assert build.returncode == 0, build.stderr
+    bundle = next(work.glob("*.js"), None) or next(work.glob("*.mjs"))
+    proc = subprocess.run(
+        ["node", str(HERE / "helper_443_2_uphill_carry.mjs"), str(bundle)],
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=60,
+    )
+    assert proc.returncode == 0, proc.stderr
+    return json.loads(proc.stdout)
+
+
+def test_상단측이_새_노선_같은_측점으로(out):
+    assert out["moved"] == {"21.50": "right", "43.00": "left"}
+
+
+def test_못_맞춘_상단측은_빼고_수를_돌려줌(out):
+    assert out["outside"] == 1
+
+
+def test_세션_없으면_그대로(out):
+    assert out["outsideEmpty"] == 0 and out["empty"] is None
+
+
+def test_노선_저장이면_상단측_차례는_옮긴_뒤():
+    save = (ROOT / "A00_Common" / "design" / "design_save.ts").read_text("utf-8")
+    assert 'if (step === "uphill" && routeSaved) continue;' in save
+    apply = (ROOT / "B05_Profile" / "B05_Profile_UI_RouteEdit_Apply.ts").read_text("utf-8")
+    body = apply.split("export async function carryAfterRouteSave(")[1].split("\n}\n")[0]
+    carry = body.index("carryChainageStates(")
+    flush = body.index("await flushUphillOverrides(projectId)")
+    assert carry < flush < body.index("saveCachedCrossPatches(")  # 옮긴 뒤 · 횡단 패치 앞
+    assert "상단측 ${uphillDropped}곳" in body  # 못 맞춤 알림

resources/tester/test_443_save_stops.py

@@ -0,0 +1,201 @@
+"""PLAN 443 — 저장 누락 ① 구조물 실패 · 상단측 재전송 · 확정 하위 실패(H6 · M3 · M6).
+
+- H6 구조물 저장 실패(409 · 그 밖) = 던짐(저장 한 줄기가 구조물 차례에서 멈춤) · 초안 남음 · 줄 안 막힘.
+- M3 상단측 차례 성공 = uphill 세션 비움(다음 [저장]이 다시 안 보냄) · 실패 = 세션 그대로.
+- M6 B05 확정 하위(비정규 측점 횡단 · 상단측 병합) 실패 = 응답 failed_parts · 화면이 던짐.
+Node 헬퍼 = `helper_443_save_stops.cjs`.
+
+./venv/Scripts/python.exe -m pytest resources/tester/test_443_save_stops.py -q
+"""
+
+import asyncio
+import json
+import subprocess
+from pathlib import Path
+from uuid import uuid4
+
+import pytest
+
+from B05_Profile import B05_Profile_Router_Lifecycle as lifecycle
+from B05_Profile.B05_Profile_Schema import RouteConfirmRequest
+
+HERE = Path(__file__).parent
+ROOT = HERE.parents[1]
+
+
+@pytest.fixture(scope="module")
+def out():
+    proc = subprocess.run(
+        ["node", str(HERE / "helper_443_save_stops.cjs")],
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=60,
+    )
+    assert proc.returncode == 0, proc.stderr
+    return json.loads(proc.stdout)
+
+
+# ── H6 ───────────────────────────────────────────────────────────────────────
+
+
+def test_구조물_409_던짐_초안_남음(out):
+    assert "먼저 저장" in out["conflict"]
+    assert out["pendingAfterConflict"] == [{"structure_id": "s1"}]
+
+
+def test_구조물_실패_뒤_줄이_안_막힘(out):
+    assert out["boom"] == "서버 500" and out["pendingAfterBoom"] == [{"structure_id": "s1"}]
+    assert out["ok"] == "ok" and out["pendingAfterOk"] is None
+    assert out["puts"] == [3, 3, 3]  # 세 번 다 나감
+
+
+def test_구조물_차례가_토스트로_삼키지_않음():
+    page = (ROOT / "B05_Profile" / "B05_Profile_UI_Page_Structures.ts").read_text("utf-8")
+    body = page.split("async function persistStructures(")[1].split("\n  }\n")[0]
+    assert "showToast(error" not in body and "return;\n" not in body.split("catch (error)")[1]
+
+
+# ── M3 · M6 화면 ─────────────────────────────────────────────────────────────
+
+
+def test_상단측_실패면_세션_그대로_성공이면_비움(out):
+    assert out["flushFailed"] == "상단측 병합 실패"
+    assert out["uphillAfterFail"] == {"40.000": "right"}
+    assert out["flushOk"] == "ok" and out["uphillAfterOk"] is None
+    assert len(out["bodies"]) == 3  # 실패 · 성공 · (빈 세션은 안 보냄) · 확정 하위 하나
+
+
+def test_확정_하위_실패면_던짐(out):
+    assert out["partsFailed"] == "비정규 측점 횡단 실패"
+
+
+def test_종단_보기_상단측_차례도_같은_창구():
+    actions = (ROOT / "B05_Profile" / "B05_Profile_UI_Page_Actions.ts").read_text("utf-8")
+    assert "await saveRouteParts(projectId, {" in actions
+    assert "loadUphillOverrides(projectId)" in actions  # 세션에서 읽음(메모리 옛 값 안 보냄)
+    assert "confirmRoute(" not in actions
+
+
+# ── M6 서버 ──────────────────────────────────────────────────────────────────
+
+
+class _Cursor:
+    async def __aenter__(self):
+        return self
+
+    async def __aexit__(self, *exc):
+        return False
+
+
+class _Connection:
+    def __init__(self):
+        self.committed = False
+
+    async def begin(self):
+        pass
+
+    async def commit(self):
+        self.committed = True
+
+    async def rollback(self):
+        pass
+
+    def cursor(self):
+        return _Cursor()
+
+
+class _Pool:
+    def __init__(self, connection):
+        self.connection = connection
+
+    def acquire(self):
+        connection = self.connection
+
+        class _Ctx:
+            async def __aenter__(self):
+                return connection
+
+            async def __aexit__(self, *exc):
+                return False
+
+        return _Ctx()
+
+
+def _patch(monkeypatch, connection, *, append, longitudinal, merge):
+    async def latest(*_a):
+        return {"id": 7, "status": "DRAFT"}
+
+    async def noop(*_a, **_k):
+        return None
+
+    async def storage(*_a):
+        return "p"
+
+    async def get_long(*_a):
+        return longitudinal
+
+    monkeypatch.setattr(lifecycle, "get_db_pool", lambda: _Pool(connection))
+    monkeypatch.setattr(lifecycle, "get_latest_route", latest)
+    monkeypatch.setattr(lifecycle, "confirm_route", noop)
+    monkeypatch.setattr(lifecycle, "complete_stage", noop)
+    monkeypatch.setattr(lifecycle, "_append_irregular_cross_sections", append)
+    monkeypatch.setattr(lifecycle, "get_project_storage_relative_path", storage)
+    monkeypatch.setattr(lifecycle, "get_longitudinal_section", get_long)
+    monkeypatch.setattr(lifecycle, "resolve_stored_project_path", lambda p: p)
+    monkeypatch.setattr(lifecycle, "_merge_uphill_overrides_into_longitudinal", merge)
+    monkeypatch.setattr(lifecycle, "sync_uphill_overrides_into_designs", noop)
+
+
+def _boom(*_a, **_k):
+    raise RuntimeError("boom")
+
+
+async def _aboom(*_a, **_k):
+    raise RuntimeError("boom")
+
+
+_REQUEST = RouteConfirmRequest(
+    filter_key="csf",
+    method="tin",
+    surface_model_id=1,
+    uphill_overrides=[{"chainage_m": 40.0, "side": "right"}],
+)
+
+
+def test_확정_하위_실패를_응답에_실음(monkeypatch):
+    connection = _Connection()
+    _patch(
+        monkeypatch,
+        connection,
+        append=_aboom,
+        longitudinal={"longitudinal_file_path": "l.json"},
+        merge=_boom,
+    )
+    result = asyncio.run(lifecycle.confirm_latest_route(uuid4(), _REQUEST, False))
+    assert result.failed_parts == ["비정규 측점 횡단", "상단측 병합"]
+    assert connection.committed  # 확정 자체는 진행(비치명)
+
+
+def test_종단_없으면_상단측_병합_실패(monkeypatch):
+    async def ok(*_a, **_k):
+        return None
+
+    _patch(monkeypatch, _Connection(), append=ok, longitudinal=None, merge=lambda *a: None)
+    result = asyncio.run(lifecycle.confirm_latest_route(uuid4(), _REQUEST, False))
+    assert result.failed_parts == ["상단측 병합(종단 없음)"]
+
+
+def test_다_되면_빈_목록(monkeypatch):
+    async def ok(*_a, **_k):
+        return None
+
+    _patch(
+        monkeypatch,
+        _Connection(),
+        append=ok,
+        longitudinal={"longitudinal_file_path": "l.json"},
+        merge=lambda *a: None,
+    )
+    result = asyncio.run(lifecycle.confirm_latest_route(uuid4(), _REQUEST, False))
+    assert result.failed_parts == []

resources/tester/test_444_culvertopt_single_draft.py

@@ -0,0 +1,88 @@
+"""444 관 구간값(H4a · H4b) — 세월교 · BOX 폼 값은 관 초안 한 벌 · 옛 예약은 관을 따라가고 못 맞추면 버림.
+
+- 폼이 낸 세월교 · BOX 값(관경 · 수량 · 월류 폭 · 날개벽)은 관 초안(가게 pipes)으로만 나감 — 조정 예약
+  (culvertopt)에 또 담지 않음(test_b06_adjust_single_form 규칙 · 관 id 로 옮김 · 노선 바뀜을 따라감).
+- 옛 세션 예약(culvertopt)은 관 옮김(측점 갈아끼움)을 따라 새 자리로 · [저장] 때 못 맞춘 값은 버림(지운 관
+  자리에 온 다른 관에 안 얹힘) · 두 번째 [저장]은 다시 안 보냄(값 그대로).
+
+짝: `helper_444_culvertopt.mjs`(444 진입점 묶음 · 진짜 상세 가게 · 내보내기).
+"""
+
+import json
+import shutil
+import subprocess
+import sys
+from pathlib import Path
+
+import pytest
+
+HERE = Path(__file__).resolve().parent
+ROOT = HERE.parents[1]
+if str(HERE) not in sys.path:
+    sys.path.insert(0, str(HERE))
+
+import test_365_page_pipeline as t365  # noqa: E402
+
+pytestmark = t365.pytestmark
+
+
+@pytest.fixture(scope="module")
+def out(tmp_path_factory) -> dict:
+    work = tmp_path_factory.mktemp("b444")
+    build = subprocess.run(  # noqa: S603 — 고정 실행 파일
+        [
+            "node",
+            str(ROOT / "config" / "node_modules" / "vite" / "bin" / "vite.js"),
+            "build",
+            "--configLoader",
+            "runner",
+            "--ssr",
+            "../resources/tester/helper_444_entry.ts",
+            "--outDir",
+            str(work),
+            "--logLevel",
+            "error",
+        ],
+        cwd=ROOT,
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=300,
+    )
+    assert build.returncode == 0, build.stderr
+    bundle = work / "bundle.mjs"
+    shutil.copy(work / "helper_444_entry.js", bundle)
+    proc = subprocess.run(  # noqa: S603 — 고정 실행 파일
+        ["node", str(HERE / "helper_444_culvertopt.mjs"), str(bundle)],
+        cwd=ROOT,
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=120,
+    )
+    assert proc.returncode == 0, proc.stderr
+    return json.loads(proc.stdout)
+
+
+def test_세월교_BOX_폼_값은_조정_예약에_안_쌓음() -> None:
+    ford = (ROOT / "B06_Section" / "B06_Section_UI_Page_Ford_Controls.ts").read_text(
+        encoding="utf-8"
+    )
+    controls = (ROOT / "B06_Section" / "B06_Section_UI_Page_Station_Controls.ts").read_text(
+        encoding="utf-8"
+    )
+    assert "queuePipeOptions" not in ford
+    assert "queuePipeOptions" not in controls
+
+
+def test_관_옮김_예약도_새_자리로(out):
+    assert out["moved"] == {"50.00": {"ford_width_m": 4}}
+
+
+def test_두_번째_저장은_값_그대로(out):
+    assert out["firstSave"] == {"puts": 1, "width": 4, "left": None}
+    assert out["secondSave"] == {"puts": 1, "width": 4}
+
+
+def test_못_맞춘_값은_다른_관에_안_얹고_버림(out):
+    assert out["unmatched"] == {"puts": 1, "width": 4, "left": None}

resources/tester/test_446_widen_carry.py

@@ -0,0 +1,106 @@
+"""446 카드 폭 넘김 다시 만들기 — 표본 폭을 넘겨 종 · 횡단을 다시 만들어도 사용자 값 그대로.
+
+- 횡단 행: 측점 열쇠(0.01 m 안)로 옛 data(설계 · 메모 · CAD · 상세 표 · 조절) · 상태 · 새 요약 이김
+- 종단 행: 생성 요약 · 생성 옵션은 새것 · 표준 횡단면 · 유토(풍선) · 계획 입력은 옛것
+- 화면: 다시 만들기 전 확인창 · 취소 = 재생성 없음(`helper_446_widen_confirm.cjs`)
+"""
+
+import json
+import subprocess
+from pathlib import Path
+
+import pytest
+
+from B06_Section.B06_Section_Router_Widen import carried_cross_rows, carried_longitudinal_data
+
+HERE = Path(__file__).parent
+ROOT = HERE.parents[1]
+
+DESIGN = {
+    "ground_type": "soil",
+    "section_mode": "right_cut",
+    "structure_note": "메모",
+    "structure_note_cad": {"lines": [1]},
+    "detail_table": {"rows": 2},
+    "display_half_width_m": 21,
+    "basin_adjust": {"d": 0.3},
+}
+
+
+def _old(row_id: int, at: float, design: dict | None = None, status: str = "CONFIRMED") -> dict:
+    data = {"sample_count": 41, "center_z": 100.0, "design": design or DESIGN}
+    return {"id": row_id, "chainage_m": at, "data": json.dumps(data), "status": status}
+
+
+def _new(row_id: int, at: float) -> dict:
+    return {"id": row_id, "chainage_m": at, "data": json.dumps({"sample_count": 43})}
+
+
+def test_횡단_행은_측점_열쇠로_설계_상태_그대로() -> None:
+    old = [_old(1, 0.0), _old(2, 20.0), _old(3, 33.456)]
+    new = [_new(11, 0.0), _new(12, 20.0), _new(13, 33.46), _new(14, 40.0)]
+    updates, dropped = carried_cross_rows(old, new)
+    assert dropped == 0
+    by_id = {row_id: (json.loads(data), status) for data, status, row_id in updates}
+    assert set(by_id) == {11, 12, 13}  # 40 m = 새 측점 · 옛 값 없음
+    data, status = by_id[13]  # 0.004 m 어긋남도 같은 측점
+    assert data["design"] == DESIGN and status == "CONFIRMED"
+    assert data["sample_count"] == 43 and data["center_z"] == 100.0  # 새 요약이 이김 · 옛 칸 남김
+
+
+def test_같은_측점_둘이면_최신_행_못_옮긴_행은_셈() -> None:
+    newer = {**DESIGN, "structure_note": "새 메모"}
+    old = [_old(1, 20.0), _old(5, 20.0, newer, "DRAFT"), _old(6, 55.0)]
+    updates, dropped = carried_cross_rows(old, [_new(12, 20.0)])
+    data, status, _ = updates[0]
+    assert json.loads(data)["design"]["structure_note"] == "새 메모" and status == "DRAFT"
+    assert dropped == 1  # 55 m — 새 측점에 없음(로그로 알림)
+
+
+def test_종단_data_는_사용자_키를_옛것으로() -> None:
+    old = {
+        "length_m": 500.0,
+        "options": {"cross_half_width_m": 20, "standard_cross_section": {"road_width_m": 3}},
+        "grade_overrides": {"max_grade_pct": 12},
+        "grade_summary": {"old": 1},
+        "mass_haul": {"balloon_offsets": {"0": [3.0, -4.0]}},
+    }
+    new = {
+        "length_m": 500.0,
+        "options": {"cross_half_width_m": 21, "station_interval_m": 20},
+        "grade_overrides": {},
+        "grade_summary": {"new": 1},
+    }
+    merged = carried_longitudinal_data(old, new)
+    assert merged["options"] == {
+        "cross_half_width_m": 21,
+        "station_interval_m": 20,
+        "standard_cross_section": {"road_width_m": 3},
+    }
+    assert merged["grade_overrides"] == {"max_grade_pct": 12}
+    assert merged["mass_haul"] == {"balloon_offsets": {"0": [3.0, -4.0]}}
+    assert merged["grade_summary"] == {"new": 1}  # 계획고 옮김이 다시 씀
+
+
+def test_반폭_요청은_옮겨_담는_길로() -> None:
+    router = (ROOT / "B06_Section" / "B06_Section_Router.py").read_text(encoding="utf-8")
+    at = router.index("async def regenerate_sections(")
+    body = router[at : router.index("async def regenerate_route_sections(", at)]
+    assert "widen_route_sections(" in body and "regenerate_route_sections(" not in body
+    assert "await carry(connection)" in router  # 같은 트랜잭션 안
+
+
+@pytest.mark.skipif(not (ROOT / "config" / "node_modules").is_dir(), reason="의존성 미설치")
+def test_다시_만들기_전_확인창_취소면_재생성_없음() -> None:
+    done = subprocess.run(  # noqa: S603 — 고정 실행 파일
+        ["node", str(HERE / "helper_446_widen_confirm.cjs")],
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+    )
+    assert done.returncode == 0, done.stderr
+    out = json.loads(done.stdout)
+    assert out["within"] is True and out["withinAsked"] == 0
+    assert out["cancel"] is False and out["cancelCalls"] == 0 and out["cancelOverlay"] == 0
+    assert out["ok"] is True and out["okCalls"] == [21] and out["okOverlay"] == 0
+    assert out["asked"][0].endswith("21/20")  # 요청 폭 · 표본 폭이 글에 들어감

resources/tester/test_design_store_save.py

@@ -102,8 +102,7 @@ def test_노선이_바뀌면_노선_먼저_뒤_차례는_새_노선(out):
         "plusStations",
         'alignment:9:{"30.000":0.2}',
         "culvert:aislo:draft:culvertopt:p1:7",
-        "uphill",
-        "carry:7->9",
+        "carry:7->9",  # 상단측은 넘김(carryAfterRouteSave)이 새 측점으로 옮긴 뒤 보냄(443-2)
         "summary:9:2",
         "toast:info",
         "done:false",