diff --git a/A00_Common/b_page_state.ts b/A00_Common/b_page_state.ts
index b3745a035..2f14d7bab 100644
--- a/A00_Common/b_page_state.ts
+++ b/A00_Common/b_page_state.ts
@@ -103,6 +103,8 @@ export const STATE_REGISTRY = {
   "cross-columns": { bucket: "pref", scope: "global" },
   /** B05 · B06 종단 누가토량 알약 자리(309-2) — 그래프 영역 안 비율 `{"x":0~1,"y":0~1}` · 없으면 처음 자리. */
   "mass-haul-badge-pos": { bucket: "pref", scope: "global" },
+  /** ☰ [설정] 마우스 · 단축키(332) — 읽기는 `input_prefs.ts`(같은 키 글자) · [저장] 때만 씀. */
+  "input-prefs": { bucket: "pref", scope: "global" },
   /** B05 3D 영역 투영(316-2) `perspective · ortho` · 없으면 원근. */
   "b05-3d-projection": { bucket: "pref", scope: "global" },
   "section-panel-height": {
diff --git a/A00_Common/b_svg_zoom_pan.ts b/A00_Common/b_svg_zoom_pan.ts
index 9590e576c..ea40f76d9 100644
--- a/A00_Common/b_svg_zoom_pan.ts
+++ b/A00_Common/b_svg_zoom_pan.ts
@@ -14,6 +14,8 @@
  * 그리는 일은 안 한다 — 넘겨받은 `layer` 에 `transform` 만 적는다.
  * ========================================================================== */
 
+import { wheelEventIn } from "./input_prefs";
+
 /** 줌·팬 상태 — 다시 그릴 때 배율을 되살리는 데 쓴다(2026-08-22 사용자 ③). */
 export interface ZoomPanState {
   scale: number;
@@ -213,8 +215,8 @@ export function attachSvgZoomPan(options: SvgZoomPanOptions): ZoomPanHandle {
         const rect = svg.getBoundingClientRect();
         const cx = ((event.clientX - rect.left) / Math.max(rect.width, 1)) * widthPx;
         const cy = ((event.clientY - rect.top) / Math.max(rect.height, 1)) * heightPx;
-        // 노선 편집 지도와 같은 방향 — **당기면 확대**(`deltaY > 0`).
-        zoomAt(event.deltaY > 0 ? WHEEL_IN : WHEEL_OUT, cx, cy);
+        // ☰ [설정] 휠 방향(332 · 기본 당기면 확대) — 그림 면이 손가락을 받으므로 핀치는 트랙패드뿐.
+        zoomAt(wheelEventIn(event) ? WHEEL_IN : WHEEL_OUT, cx, cy);
       },
       { passive: false },
     );
diff --git a/A00_Common/input_prefs.ts b/A00_Common/input_prefs.ts
new file mode 100644
index 000000000..49fff86db
--- /dev/null
+++ b/A00_Common/input_prefs.ts
@@ -0,0 +1,64 @@
+/* =============================================================================
+ * input_prefs.ts
+ * 마우스 · 단축키 설정 읽기 층(PLAN 332) — ☰ [설정] 창이 [저장] 때 계정 pref 로 씀.
+ *
+ * - 값 = `aislo:pref:input-prefs`(등록표 `input-prefs`) JSON 한 벌 · 부를 때마다 읽음(새로고침 없이 바로 따름)
+ * - 없음 · 깨짐 · Node(저장소 없음) = 기본값(= 지금 동작) · 의존 없음 · 불러올 때 window 안 만짐(CAD 도 import)
+ * - 휠 확대 방향 하나로 모든 화면 일체 — 당김 = 휠을 몸 쪽으로(deltaY > 0) 굴리면 확대
+ * - 핀치(트랙패드 · 손가락)는 설정과 상관없이 늘 벌리면 확대(deltaY < 0)
+ * ========================================================================== */
+
+export type WheelZoom = "pull" | "push";
+
+export interface InputPrefs {
+  /** 휠 확대 방향 — pull = 당기면 확대 · push = 밀면 확대 */
+  wheelZoom: WheelZoom;
+  /** CAD 내 별칭 `{명령: [별칭]}`(대문자 · acad.pgp 식 — 명령 이름 > 내 별칭 > 기본 별칭) */
+  cadAliases: Record<string, string[]>;
+}
+
+/** `stateKey("input-prefs")` 와 같은 키(시험이 맞춰 봄) — 등록표를 불러오면 window 가 딸려 와서 글자로 둠 */
+export const INPUT_PREFS_KEY = "aislo:pref:input-prefs";
+
+export const DEFAULT_INPUT_PREFS: InputPrefs = { wheelZoom: "pull", cadAliases: {} };
+
+const cleanAliases = (raw: unknown): Record<string, string[]> => {
+  const out: Record<string, string[]> = {};
+  if (!raw || typeof raw !== "object") return out;
+  for (const [id, list] of Object.entries(raw as Record<string, unknown>)) {
+    if (!Array.isArray(list)) continue;
+    const aliases = list
+      .filter((a): a is string => typeof a === "string")
+      .map((a) => a.toUpperCase());
+    if (aliases.length) out[id.toUpperCase()] = aliases;
+  }
+  return out;
+};
+
+/** 지금 설정 — 부를 때마다 저장소에서 읽음 */
+export function inputPrefs(): InputPrefs {
+  try {
+    const raw = globalThis.localStorage?.getItem(INPUT_PREFS_KEY);
+    if (!raw) return { ...DEFAULT_INPUT_PREFS, cadAliases: {} };
+    const value = JSON.parse(raw) as Partial<InputPrefs> | null;
+    return {
+      wheelZoom: value?.wheelZoom === "push" ? "push" : "pull",
+      cadAliases: cleanAliases(value?.cadAliases),
+    };
+  } catch {
+    return { ...DEFAULT_INPUT_PREFS, cadAliases: {} };
+  }
+}
+
+/** 휠 한 번이 확대인가 — 설정 방향을 따름 */
+export const wheelIn = (deltaY: number): boolean =>
+  inputPrefs().wheelZoom === "push" ? deltaY < 0 : deltaY > 0;
+
+/** 트랙패드 핀치 — 브라우저가 Ctrl+휠 · 잘게 쪼갠 값으로 냄
+ *  ponytail: |deltaY| < 50 로 마우스 Ctrl+휠(한 칸 ≥ 약 100)과 가름 · 잘게 도는 마우스는 핀치로 봄 */
+export const isTrackpadPinch = (e: Pick<WheelEvent, "ctrlKey" | "deltaY">): boolean =>
+  e.ctrlKey && Math.abs(e.deltaY) < 50;
+
+/** 휠 사건이 확대인가 — 핀치(`pinch` 손가락 벌림 · 트랙패드)는 늘 벌리면 확대 · 나머지는 설정 방향 */
+export const wheelEventIn = (e: Pick<WheelEvent, "ctrlKey" | "deltaY">, pinch = false): boolean =>
+  pinch || isTrackpadPinch(e) ? e.deltaY < 0 : wheelIn(e.deltaY);
diff --git a/A00_Common/spreadsheet/spreadsheet_grid.ts b/A00_Common/spreadsheet/spreadsheet_grid.ts
index da403b2d4..9e0b97db7 100644
--- a/A00_Common/spreadsheet/spreadsheet_grid.ts
+++ b/A00_Common/spreadsheet/spreadsheet_grid.ts
@@ -13,6 +13,7 @@
 
 import "./spreadsheet_grid.css";
 import { colIndex, toA1 } from "./spreadsheet_address";
+import { wheelZoomsIn } from "../touch_bridge";
 import {
   buildColGeometry,
   buildOutlineRuns,
@@ -271,7 +272,8 @@ export function createGrid(ctx: SpreadsheetContext): GridHandle {
     if (!ev.ctrlKey) return;
     ev.preventDefault();
     const before = zoom;
-    const next = Math.min(ZOOM_MAX, Math.max(ZOOM_MIN, zoom * Math.exp(-ev.deltaY * 0.0015)));
+    const step = (wheelZoomsIn(ev) ? 1 : -1) * Math.abs(ev.deltaY) * 0.0015; // ☰ [설정] 방향(332)
+    const next = Math.min(ZOOM_MAX, Math.max(ZOOM_MIN, zoom * Math.exp(step)));
     if (next === before) return;
     zoom = next;
     colGeo = scaledGeometry(baseColGeo, zoom);
diff --git a/A00_Common/touch_bridge.ts b/A00_Common/touch_bridge.ts
index 6c83aa700..6fc8a810d 100644
--- a/A00_Common/touch_bridge.ts
+++ b/A00_Common/touch_bridge.ts
@@ -11,6 +11,8 @@
  * 마우스 · 펜 이벤트는 건드리지 않음.
  * ========================================================================== */
 
+import { wheelEventIn } from "./input_prefs";
+
 const LONG_MS = 500;
 const SLOP_PX = 10;
 const DOUBLE_MS = 300;
@@ -31,9 +33,8 @@ let contactPx = 0;
 /** 고름 반경(px) — 손가락으로 눌렀으면 접촉 크기만큼(최소 24px) · 마우스 · 펜은 그대로(기기대응 4-4) */
 export const pickPx = (px: number): number => (contactPx ? Math.max(px, contactPx) : px);
 
-/** 「당기면 확대」 휠 화면(B04 · B05 지도)의 확대 판정 — 손가락 벌림은 거꾸로라 뒤집음 */
-export const wheelZoomsIn = (e: WheelEvent): boolean =>
-  isPinchWheel(e) ? e.deltaY < 0 : e.deltaY > 0;
+/** 휠 화면(B04 · B05 지도 · M02 그림 · 시트)의 확대 판정 — ☰ [설정] 방향(332) · 손가락 벌림은 늘 벌리면 확대 */
+export const wheelZoomsIn = (e: WheelEvent): boolean => wheelEventIn(e, isPinchWheel(e));
 
 const ownsTouch = (t: EventTarget | null): boolean =>
   t instanceof Element && !!t.closest("[data-touch-own]");
diff --git a/B04_PreProcess/B04_PreProcess_UI_Camera.ts b/B04_PreProcess/B04_PreProcess_UI_Camera.ts
index d5adca1d9..8bf42cc44 100644
--- a/B04_PreProcess/B04_PreProcess_UI_Camera.ts
+++ b/B04_PreProcess/B04_PreProcess_UI_Camera.ts
@@ -1,6 +1,7 @@
 import * as THREE from "three";
 import type { OrbitControls } from "three/examples/jsm/controls/OrbitControls.js";
 import type { SurfaceBounds } from "./B04_PreProcess_Api_Fetch";
+import { wheelEventIn } from "../A00_Common/input_prefs";
 
 export const SURFACE_CAMERA_FOV = 50;
 const LIGHT_VIEWER_BACKGROUND = 0xf5f7f9;
@@ -246,11 +247,11 @@ export function bindCursorPivotControls(options: CursorPivotOptions): () => void
   }
 
   /** 휠 줌 — 커서가 가리키는 지점을 축으로 삼아 그 점이 화면에 고정된 채 멀어지고 가까워진다.
-   *  휠을 위로 올리면 멀어진다(사용자 지시). */
+   *  방향 = ☰ [설정](332 · 기본 당기면 가까워짐 · 위로 올리면 멀어짐). */
   function onWheel(event: WheelEvent): void {
     if (!controls.enabled || options.blocked?.()) return;
     event.preventDefault();
-    zoomAround(event, event.deltaY < 0 ? 1 / ZOOM_STEP : ZOOM_STEP);
+    zoomAround(event, wheelEventIn(event) ? ZOOM_STEP : 1 / ZOOM_STEP);
   }
 
   /** 그 자리를 축으로 멀어지고(factor > 1) 가까워짐 — 휠 · 두 손가락 벌림이 같이 씀 */
diff --git a/B04_PreProcess/B04_PreProcess_UI_MapOverlays.ts b/B04_PreProcess/B04_PreProcess_UI_MapOverlays.ts
index 73543179e..e46176d19 100644
--- a/B04_PreProcess/B04_PreProcess_UI_MapOverlays.ts
+++ b/B04_PreProcess/B04_PreProcess_UI_MapOverlays.ts
@@ -211,6 +211,8 @@ export interface StationTickOptions {
   /** 라벨을 그릴 때마다 그 글자 상자를 알린다 — 누름 판정이 쓴다. 그림 좌표(회전 전)이고,
    *  상자는 `uprightRad` 만큼 (x, y) 를 축으로 돌아 있다. 안 주면 아무 일도 안 한다. */
   onLabel?: (box: StationLabelBox) => void;
+  /** 그릴 측점 누가거리(오름차순) — 안 주면 간격마다(B05 편집 창 측점 스냅 · 요구 224-2). */
+  chainages?: ReadonlyArray<number>;
 }
 
 /** 그려진 측점 라벨 글자 상자 — 가운데 (x, y) · 가로 반폭 `half` · 세로 반폭 8 · 돌린 각. */
@@ -253,7 +255,10 @@ export function drawStationTicks(
   // 이미 그린 라벨과 겹치는 자리는 비켜 놓는다.
   const drawn: Array<{ x: number; y: number; half: number }> = [];
   let cursor = 1;
-  for (let chainage = 0; chainage <= total; chainage += interval) {
+  const marks: number[] = [];
+  if (options.chainages) marks.push(...options.chainages.filter((value) => value <= total));
+  else for (let chainage = 0; chainage <= total; chainage += interval) marks.push(chainage);
+  for (const chainage of marks) {
     const stationNo = Math.round(chainage / interval);
     if (stationNo % step !== 0) continue;
     while (cursor < cumulative.length - 1 && cumulative[cursor] < chainage) cursor += 1;
diff --git a/B05_Profile/B05_Profile_Api_Replan.ts b/B05_Profile/B05_Profile_Api_Replan.ts
index 3285d710d..97ac66fb1 100644
--- a/B05_Profile/B05_Profile_Api_Replan.ts
+++ b/B05_Profile/B05_Profile_Api_Replan.ts
@@ -100,6 +100,8 @@ export interface RoutePlanResponse {
   violation_count: number;
   /** 사용자가 고친 계획노선이 저장돼 있으면 true. */
   edited: boolean;
+  /** [측점 스냅] 켬(요구 224-2) — [확인] 때 곡선표에 적은 값. 칸 없으면 끔. */
+  station_snap?: boolean;
   /** 현재 초기값 — 서버가 [확인] 때 프로젝트에 적어 둔 초기노선 갈래(계획서 20). */
   current_initial?: { logic: string; weights: Record<string, number> | null };
   /** 전처리가 만든 초기 노선(예상노선 추적)의 노드 · 곡선 — [초기화]가 재계산 없이 놓는다. */
@@ -220,6 +222,8 @@ export interface CrossPreviewRequest {
   station_interval_m: number;
   /** 횡단 반폭(m) — 없으면 서버 기본값. */
   cross_half_width_m?: number;
+  /** [측점 스냅] 켬 — 호 안 측점 하나를 곡선 중점으로(요구 224-2). */
+  station_snap?: boolean;
 }
 
 /** 한 측점 횡단을 묻는다. 종·횡단을 한 번 돌리므로 **한두 초** 걸린다(사용자 확정: 괜찮음). */
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit.ts b/B05_Profile/B05_Profile_UI_RouteEdit.ts
index a69bcf658..65d2759b3 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit.ts
@@ -59,6 +59,7 @@ import {
   viewPxPerMeter,
 } from "./B05_Profile_UI_RouteEdit_View";
 import { createCurveBar } from "./B05_Profile_UI_RouteEdit_CurveBar";
+import { curveSpans, snapCurveStations, stationsAlong } from "./B05_Profile_UI_RouteEdit_Frame";
 import {
   lockColumn,
   readRouteLocks,
@@ -109,7 +110,7 @@ export async function openRouteEditModal(
   const stationIntervalM = options.stationIntervalM ?? 20;
   const chrome = createRouteEditChrome();
   const { overlay, canvas, status, busy, measureBox, measureText, measureButton } = chrome;
-  const { minorContourButton, terrainSelect } = chrome;
+  const { minorContourButton, terrainSelect, stationSnapButton } = chrome;
   const context = canvas.getContext("2d")!;
 
   let expected: Vertex[] = [];
@@ -138,6 +139,24 @@ export async function openRouteEditModal(
   let apexLock: boolean[] = [];
   /** 지금 고른 꺾임점 — 곡선 편집줄이 이 자리를 만진다. 없으면 -1. */
   let picked = -1;
+  /** [측점 스냅](요구 224-2) — 보기 모드라 되돌리기 밖 · 열 때 서버 값 · [확인] 때 저장. */
+  let stationSnap = false;
+  let savedStationSnap = false;
+  /** 편집 창 측점 한 곳 — 끔이면 null(간격마다) · 켬이면 호 안 하나를 곡선 중점으로.
+   *  그리기 · 누름 · 기울기가 이것을 봄 · 셈은 서버 짝(`_Frame`). */
+  const stations = (): number[] | null => {
+    if (!stationSnap) return null;
+    const line = plannedLine.length ? plannedLine : planned;
+    return snapCurveStations(
+      stationsAlong(line, stationIntervalM, false),
+      curveSpans(line, curveInfo),
+    );
+  };
+  const setStationSnap = (on: boolean): void => {
+    stationSnap = on;
+    stationSnapButton.classList.toggle("is-active", on);
+    stationSnapButton.setAttribute("aria-pressed", String(on));
+  };
   /** 되돌리기 사진첩 — 노선을 읽은 뒤에 선다(그전에는 되돌릴 것이 없다). */
   let history: RouteEditHistory | null = null;
   let meta: VWorldMeta | null = null;
@@ -165,6 +184,7 @@ export async function openRouteEditModal(
       })),
       min_radius_m: minRadiusM || 12,
       station_interval_m: stationIntervalM,
+      station_snap: stationSnap,
     }),
     onShown: () => draw(), // 횡단이 뜨면 그 측점 반폭 선을 그린다.
   });
@@ -217,6 +237,11 @@ export async function openRouteEditModal(
   const slope = createSlopeLabels({ projectId, isClosed: () => closed, onChange: () => draw() });
   /** 1m 간격 등고선 켬끔 — 기본 꺼짐(계획서 18 ②). */
   const showMinorContours = bindMinorContourToggle(minorContourButton, () => draw());
+  stationSnapButton.addEventListener("click", () => {
+    setStationSnap(!stationSnap);
+    void crossPreview.refresh(); // 떠 있는 횡단도 옮긴 측점 규칙으로.
+    draw();
+  });
   /** 보던 화면 기억(계획서 18 ③) — 자료를 읽고 화면을 되살린 **뒤부터** 적는다. */
   let viewReady = false;
   const viewMemory = createViewMemory(projectId, () =>
@@ -307,6 +332,7 @@ export async function openRouteEditModal(
           toScreen,
           uprightRad: rotation.uprightRad(),
           dragging: pointer.dragging(),
+          chainages: stations(),
         }),
       measure: measure.marks(),
       crossWidth: crossPreview.watched(),
@@ -319,6 +345,7 @@ export async function openRouteEditModal(
       locked: apexLock,
       picked,
       stationIntervalM,
+      stations: stations(),
     });
     // 라벨은 **그린 뒤** 자리를 맞춘다 — 확대·이동·창 크기가 바뀌어도 고른 노드에 붙어 있게.
     syncCurveBar();
@@ -448,6 +475,7 @@ export async function openRouteEditModal(
     canvas,
     status,
     stationIntervalM,
+    stations,
     state: () => ({
       planned,
       plannedLine,
@@ -530,8 +558,12 @@ export async function openRouteEditModal(
     projectId,
     nodes: () => ({ planned, curveOn, curveRadius }),
     // 분석 지형만 바꿔도 [확인]이 설계 지형을 바꿔 다시 셈한다(PLAN 133-2).
-    changed: () => (history?.isDirty() ?? false) || pickedTerrain() !== designTerrain,
+    changed: () =>
+      (history?.isDirty() ?? false) ||
+      pickedTerrain() !== designTerrain ||
+      stationSnap !== savedStationSnap,
     terrain: pickedTerrain,
+    stationSnap: () => stationSnap,
     initial,
     profileShown: strip.settle,
     close,
@@ -554,6 +586,8 @@ export async function openRouteEditModal(
     minRadiusM = plan.min_radius_m ?? 0;
     limitRadiusM = plan.limit_radius_m ?? 0;
     limitArcM = plan.limit_curve_length_m ?? 0;
+    savedStationSnap = plan.station_snap === true;
+    setStationSnap(savedStationSnap);
     // 곡선 성분을 편집할 수 있는 꼴로 편다 — 셈은 `_Edits` 몫(까닭도 그쪽에 적었다).
     const flat = flattenServerPlan(nodes, plan.curves ?? []);
     ({ planned, curveOn, curveRadius, curveLock, curveArc } = flat);
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Apply.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Apply.ts
index ed8036b2a..05f05f7d2 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Apply.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Apply.ts
@@ -27,6 +27,8 @@ export interface RouteApplyParams {
   changed: () => boolean;
   /** 설계 지형으로 보낼 분석 지형(PLAN 133-2) — 고르기가 안 보이면 null(지금 설계 지형 그대로). */
   terrain: () => string | null;
+  /** [측점 스냅] 켬끔(요구 224-2) — 곡선표에 적혀 측점 셈이 읽음. */
+  stationSnap: () => boolean;
   /** 초기노선 갈래 — [확인]에 지금 초기값을 싣고, 결과 캐시를 비운 뒤 다시 적는다. */
   initial: {
     current: () => unknown;
@@ -97,6 +99,7 @@ export function bindRouteApply(params: RouteApplyParams): void {
           // 띠 응답 전에 눌렀으면 기다린다 — 서버는 같은 노선 · 같은 셈으로 띠 계획선을 다시 낸다.
           balanced_profile: await params.profileShown(),
           terrain: params.terrain(),
+          station_snap: params.stationSnap(),
         },
       ),
     );
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Chrome.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Chrome.ts
index fb0c4208d..c6e66feee 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Chrome.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Chrome.ts
@@ -36,6 +36,8 @@ export interface RouteEditChrome {
   measureText: HTMLElement;
   measureButton: HTMLButtonElement;
   minorContourButton: HTMLButtonElement;
+  /** [측점 스냅] 켬끔(요구 224-2) — `aria-pressed` · `is-active` 는 본체가 맞춤. */
+  stationSnapButton: HTMLButtonElement;
   /** 분석 지형 고르기(PLAN 133-1) — 라이다 있는 프로젝트만 보임(감싼 label 의 hidden). */
   terrainSelect: HTMLSelectElement;
 }
@@ -65,6 +67,9 @@ export function createRouteEditChrome(): RouteEditChrome {
             title="1m 간격 등고선을 얇고 옅게 겹칩니다 (확대하면 보임)">1m 등고선</button>
           <button type="button" class="ui-btn ui-btn--ghost" data-act="measure"
             title="노선 위 두 점을 눌러 거리·기울기를 잽니다 (Shift+클릭도 같음)">거리 재기</button>
+          <button type="button" class="ui-btn ui-btn--ghost" data-act="station-snap"
+            aria-pressed="false"
+            title="곡선(호) 안 측점 하나를 곡선 중점(MC)으로 옮깁니다 — [확인] 때 저장">측점 스냅</button>
           <i class="b05-routeedit__divider" aria-hidden="true"></i>
           <button type="button" class="ui-btn ui-btn--ghost" data-act="undo"
             title="되돌리기 (Ctrl+Z)" disabled>↶ 되돌리기</button>
@@ -136,6 +141,7 @@ export function createRouteEditChrome(): RouteEditChrome {
     '[data-act="contour-minor"]',
   )!;
   const terrainSelect = overlay.querySelector<HTMLSelectElement>('[data-act="terrain"]')!;
+  const stationSnapButton = overlay.querySelector<HTMLButtonElement>('[data-act="station-snap"]')!;
 
   return {
     overlay,
@@ -146,6 +152,7 @@ export function createRouteEditChrome(): RouteEditChrome {
     measureText,
     measureButton,
     minorContourButton,
+    stationSnapButton,
     terrainSelect,
   };
 }
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts
index 1c6a3648c..c0b491141 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts
@@ -35,6 +35,7 @@ export interface CrossPreviewParams {
     vertices: Array<{ x: number; y: number; curve: boolean; radius_m: number | null }>;
     min_radius_m: number;
     station_interval_m: number;
+    station_snap?: boolean;
   };
   /** 위 판에 횡단이 떴다 · 비었다 — 평면도의 반폭 선을 다시 그리라는 신호. */
   onShown?: () => void;
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Input.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Input.ts
index fbef8b083..4eef74ec3 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Input.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Input.ts
@@ -321,13 +321,15 @@ export function stationAtScreen(
   py: number,
   maxPx: number,
   labels: ReadonlyArray<StationLabelBox> = [],
+  /** 측점 누가거리 — 안 주면 간격마다(측점 스냅 · 요구 224-2). */
+  chainages: ReadonlyArray<number> | null = null,
 ): number | null {
   // 라벨이 그려진 측점만 눈금도 보인다(`drawStationTicks` 가 성기게 솎는다) — 안 보이는 눈금이
   // 호·등고선 누름을 가로채지 않게 한다. 라벨 정보가 없으면 전부 본다.
   const shown = labels.length
     ? new Set(labels.map((box) => Math.round(box.chainage / intervalM)))
     : null;
-  const tick = stationTickAtScreen(line, toScreen, intervalM, px, py, maxPx, shown);
+  const tick = stationTickAtScreen(line, toScreen, intervalM, px, py, maxPx, shown, chainages);
   // 눈금과 라벨이 겹치면 눈금이 먼저다 — 라벨은 눈금을 못 잡았을 때만 본다.
   return tick ?? stationLabelAtScreen(labels, px, py);
 }
@@ -373,6 +375,7 @@ function stationTickAtScreen(
   py: number,
   maxPx: number,
   shown: ReadonlySet<number> | null,
+  chainages: ReadonlyArray<number> | null,
 ): number | null {
   if (line.length < 2 || !(intervalM > 0)) return null;
   const cumulative: number[] = [0];
@@ -386,7 +389,10 @@ function stationTickAtScreen(
   let best: number | null = null;
   let bestDistance = maxPx;
   let cursor = 1;
-  for (let chainage = 0; chainage <= total; chainage += intervalM) {
+  const marks: number[] = [];
+  if (chainages) marks.push(...chainages.filter((value) => value <= total));
+  else for (let chainage = 0; chainage <= total; chainage += intervalM) marks.push(chainage);
+  for (const chainage of marks) {
     if (shown && !shown.has(Math.round(chainage / intervalM))) continue;
     while (cursor < cumulative.length - 1 && cumulative[cursor] < chainage) cursor += 1;
     const back = line[cursor - 1];
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Pointer.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Pointer.ts
index 3763161ea..2da4c4f10 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Pointer.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Pointer.ts
@@ -64,6 +64,8 @@ export interface RouteEditPointerParams {
   canvas: HTMLCanvasElement;
   status: HTMLElement;
   stationIntervalM: number;
+  /** 편집 창 측점 — 끔이면 null(간격마다 · 측점 스냅 요구 224-2). */
+  stations: () => ReadonlyArray<number> | null;
   state: () => RouteEditPointerState;
   setPicked: (index: number) => void;
   setPickedContour: (index: number) => void;
@@ -194,6 +196,7 @@ export function bindRouteEditPointer(params: RouteEditPointerParams): RouteEditP
           py,
           pickPx(STATION_HIT_PX),
           stationLabelBoxes(canvas),
+          params.stations(),
         );
         if (chainage === null) return false;
         void params.crossPreview.open(chainage);
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts
index 3a35c064e..90c6664ec 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts
@@ -94,6 +94,8 @@ export interface RouteEditScene {
   picked: number;
   /** 규칙 측점 간격(m). */
   stationIntervalM: number;
+  /** 그릴 측점 누가거리 — 끔이면 null(간격마다 · 측점 스냅 요구 224-2). */
+  stations: ReadonlyArray<number> | null;
   /** 구간 재기로 찍은 점(0~2개) — 노선 위 자리와 그 노선의 누가거리(계획서 0-9 ⑤). */
   measure: ReadonlyArray<MeasureMark>;
   /** 오른쪽에 횡단이 떠 있는 측점과 좌·우 설계 반폭 — 없으면 null. */
@@ -478,6 +480,7 @@ function drawStationMarks(
       toScreen: (x, y) => scene.toScreen([x, y]),
       uprightRad: scene.uprightRad,
       onLabel: (box) => labels.push(box),
+      chainages: scene.stations ?? undefined,
     },
   );
   const total = polylineLengthM(line);
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Slope.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Slope.ts
index e35789f81..aa372ee5b 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Slope.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Slope.ts
@@ -42,6 +42,8 @@ export interface SlopeDrawArgs {
   uprightRad: number;
   /** 노드·손잡이를 끄는 중 — 이때는 묻지 않는다. */
   dragging: boolean;
+  /** 측점 누가거리(종점 뺌) — 끔이면 null(간격마다 · 측점 스냅 요구 224-2). */
+  chainages?: ReadonlyArray<number> | null;
 }
 
 export interface SlopeLabels {
@@ -91,6 +93,8 @@ export function createSlopeLabels(params: SlopeLabelParams): SlopeLabels {
   /** 높이를 받아 둔 노선·간격과 그 결과. 노선이 바뀌면(새 배열) 버린다. */
   let cachedLine: ReadonlyArray<Vertex> | null = null;
   let cachedInterval = 0;
+  /** 받아 둔 측점 목록 열쇠 — 스냅을 켜고 끄면 같은 노선이어도 다시 묻는다. */
+  let cachedKey = "";
   let chainages: number[] = [];
   let heights: Array<number | null> = [];
   /** 측점 자리와 구간 가운데 자리 — 받아 올 때 한 번 셈해 둔다(그리기마다 다시 안 셈). */
@@ -100,19 +104,27 @@ export function createSlopeLabels(params: SlopeLabelParams): SlopeLabels {
   let asking: ReadonlyArray<Vertex> | null = null;
   let timer: ReturnType<typeof setTimeout> | null = null;
 
-  function schedule(line: ReadonlyArray<Vertex>, intervalM: number): void {
+  function schedule(
+    line: ReadonlyArray<Vertex>,
+    intervalM: number,
+    marks: ReadonlyArray<number> | null,
+  ): void {
     if (asking === line) return;
     if (timer) clearTimeout(timer);
     asking = line;
     timer = setTimeout(() => {
       timer = null;
-      const wanted = stationChainages(lengthOf(line), intervalM);
+      const total = lengthOf(line);
+      const wanted = marks
+        ? [...marks.filter((value) => value < total - 1e-6), total]
+        : stationChainages(total, intervalM);
       const points = pointsAt(line, wanted);
       void fetchRouteElevations(params.projectId, points)
         .then((z) => {
           if (params.isClosed() || asking !== line) return; // 그 사이 노선이 또 바뀌었다.
           cachedLine = line;
           cachedInterval = intervalM;
+          cachedKey = marks?.join() ?? "";
           chainages = wanted;
           heights = z;
           stationPoints = points;
@@ -160,9 +172,11 @@ export function createSlopeLabels(params: SlopeLabelParams): SlopeLabels {
     const { line, intervalM } = args;
     if (line.length < 2 || !(intervalM > 0)) return 0;
     if (intervalM * args.pxPerMeter < SLOPE_MIN_GAP_PX) return 0; // 멀리 보면 숨긴다.
-    const fresh = cachedLine === line && cachedInterval === intervalM;
+    const marks = args.chainages ?? null;
+    const fresh =
+      cachedLine === line && cachedInterval === intervalM && cachedKey === (marks?.join() ?? "");
     if (!fresh) {
-      if (!args.dragging) schedule(line, intervalM);
+      if (!args.dragging) schedule(line, intervalM, marks);
       return 0; // 낡은 높이로 그리면 엉뚱한 기울기가 적힌다 — 받아 올 때까지 비운다.
     }
     // 화면 안 판정은 **캔버스 변환 그대로**(회전·고해상도 배율 포함) 옮긴 자리로 한다 —
diff --git a/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts b/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts
index 73b6811fb..25b7d8542 100644
--- a/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts
@@ -10,7 +10,8 @@ import {
 	setShouldDrawHelpers,
 } from '../state';
 import { Tool } from '../tools';
-import type { DrawEvent, MouseClickEvent, StateEvent, ToolContext } from './tool.types';
+import type { DrawEvent, PointInputEvent, StateEvent, ToolContext } from './tool.types';
+import { getPointFromEvent } from '../helpers/get-point-from-event';
 import { assign, createMachine, sendTo } from 'xstate';
 import { selectToolStateMachine } from './select-tool';
 import type { Entity } from '../entities/Entity';
@@ -147,6 +148,10 @@ export const copyToolStateMachine = createMachine(
 						actions: [CopyAction.RECORD_START_POINT, CopyAction.COPY_SELECTION_BEFORE_COPY],
 						target: CopyState.WAITING_FOR_END_COPY_POINT,
 					},
+					ABSOLUTE_POINT_INPUT: {
+						actions: [CopyAction.RECORD_START_POINT, CopyAction.COPY_SELECTION_BEFORE_COPY],
+						target: CopyState.WAITING_FOR_END_COPY_POINT,
+					},
 					ESC: {
 						actions: CopyAction.DESELECT_ENTITIES,
 						target: CopyState.INIT,
@@ -166,6 +171,18 @@ export const copyToolStateMachine = createMachine(
 						actions: [CopyAction.COPY_SELECTION],
 						target: CopyState.WAITING_FOR_END_COPY_POINT,
 					},
+					NUMBER_INPUT: {
+						actions: [CopyAction.COPY_SELECTION],
+						target: CopyState.WAITING_FOR_END_COPY_POINT,
+					},
+					ABSOLUTE_POINT_INPUT: {
+						actions: [CopyAction.COPY_SELECTION],
+						target: CopyState.WAITING_FOR_END_COPY_POINT,
+					},
+					RELATIVE_POINT_INPUT: {
+						actions: [CopyAction.COPY_SELECTION],
+						target: CopyState.WAITING_FOR_END_COPY_POINT,
+					},
 					ESC: {
 						actions: CopyAction.DESELECT_ENTITIES,
 						target: CopyState.INIT,
@@ -191,10 +208,9 @@ export const copyToolStateMachine = createMachine(
 				setShouldDrawHelpers(true);
 			},
 			[CopyAction.RECORD_START_POINT]: assign(({ event }) => {
-				setAngleGuideOriginPoint((event as MouseClickEvent).worldMouseLocation);
-				return {
-					startPoint: (event as MouseClickEvent).worldMouseLocation,
-				};
+				const startPoint = getPointFromEvent(null, event as PointInputEvent);
+				setAngleGuideOriginPoint(startPoint);
+				return { startPoint };
 			}),
 			[CopyAction.COPY_SELECTION_BEFORE_COPY]: assign(({ context }) => {
 				const selectedEntities = getSelectedEntities();
@@ -208,7 +224,9 @@ export const copyToolStateMachine = createMachine(
 				return {
 					startPoint: context.startPoint,
 					// Make a copy of the selected entities before copying them, so we can restore them when the user cancels the copy action
-					originalSelectedEntities: compact(selectedEntities.map((entity) => cloneKeepingLook(entity))),
+					originalSelectedEntities: compact(
+						selectedEntities.map((entity) => cloneKeepingLook(entity))
+					),
 					copiedEntities: selectedEntities,
 				};
 			}),
@@ -217,11 +235,13 @@ export const copyToolStateMachine = createMachine(
 					throw new Error('[COPY] Calling draw temp copy line without a start point');
 				}
 
-				const endPointTemp = (event as DrawEvent).drawController.getWorldMouseLocation();
+				const endPointTemp = getPointFromEvent(context.startPoint, event as DrawEvent);
 
 				// Copy the entities to the new location
 				// Draw all selected entities according to translation vector, so the user gets visual feedback of where the entities will be copied;
-				const movedEntities = context.originalSelectedEntities.map((entity) => cloneKeepingLook(entity));
+				const movedEntities = context.originalSelectedEntities.map((entity) =>
+					cloneKeepingLook(entity)
+				);
 				moveEntities(
 					movedEntities,
 					endPointTemp.x - context.startPoint.x,
@@ -245,8 +265,11 @@ export const copyToolStateMachine = createMachine(
 				}
 
 				// Copy the entities one final time
-				const currentEndPoint = (event as MouseClickEvent).worldMouseLocation;
-				const copiedEntities = context.originalSelectedEntities.map((entity) => cloneKeepingLook(entity));
+				// 클릭 · 거리 · 절대 · 상대 좌표(키보드)
+				const currentEndPoint = getPointFromEvent(context.startPoint, event as PointInputEvent);
+				const copiedEntities = context.originalSelectedEntities.map((entity) =>
+					cloneKeepingLook(entity)
+				);
 				moveEntities(
 					copiedEntities,
 					currentEndPoint.x - context.startPoint.x,
diff --git a/B07_DesignDetail/openwebcad/src/tools/move-tool.ts b/B07_DesignDetail/openwebcad/src/tools/move-tool.ts
index ba19c7073..a2fe3cbfd 100644
--- a/B07_DesignDetail/openwebcad/src/tools/move-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/move-tool.ts
@@ -11,7 +11,8 @@ import {
 	setShouldDrawHelpers,
 } from '../state';
 import { Tool } from '../tools';
-import type { DrawEvent, MouseClickEvent, StateEvent, ToolContext } from './tool.types';
+import type { DrawEvent, PointInputEvent, StateEvent, ToolContext } from './tool.types';
+import { getPointFromEvent } from '../helpers/get-point-from-event';
 import { assign, createMachine, sendTo } from 'xstate';
 import { selectToolStateMachine } from './select-tool';
 import type { Entity } from '../entities/Entity';
@@ -148,6 +149,10 @@ export const moveToolStateMachine = createMachine(
 						actions: [MoveAction.RECORD_START_POINT, MoveAction.COPY_SELECTION_BEFORE_MOVE],
 						target: MoveState.WAITING_FOR_END_MOVE_POINT,
 					},
+					ABSOLUTE_POINT_INPUT: {
+						actions: [MoveAction.RECORD_START_POINT, MoveAction.COPY_SELECTION_BEFORE_MOVE],
+						target: MoveState.WAITING_FOR_END_MOVE_POINT,
+					},
 					ESC: {
 						actions: MoveAction.DESELECT_ENTITIES,
 						target: MoveState.INIT,
@@ -167,6 +172,18 @@ export const moveToolStateMachine = createMachine(
 						actions: [MoveAction.MOVE_SELECTION, MoveAction.DESELECT_ENTITIES],
 						target: MoveState.WAITING_FOR_SELECTION,
 					},
+					NUMBER_INPUT: {
+						actions: [MoveAction.MOVE_SELECTION, MoveAction.DESELECT_ENTITIES],
+						target: MoveState.WAITING_FOR_SELECTION,
+					},
+					ABSOLUTE_POINT_INPUT: {
+						actions: [MoveAction.MOVE_SELECTION, MoveAction.DESELECT_ENTITIES],
+						target: MoveState.WAITING_FOR_SELECTION,
+					},
+					RELATIVE_POINT_INPUT: {
+						actions: [MoveAction.MOVE_SELECTION, MoveAction.DESELECT_ENTITIES],
+						target: MoveState.WAITING_FOR_SELECTION,
+					},
 					ESC: {
 						actions: MoveAction.RESTORE_ORIGINAL_ENTITIES,
 						target: MoveState.INIT,
@@ -192,10 +209,9 @@ export const moveToolStateMachine = createMachine(
 				setShouldDrawHelpers(true);
 			},
 			[MoveAction.RECORD_START_POINT]: assign(({ event }) => {
-				setAngleGuideOriginPoint((event as MouseClickEvent).worldMouseLocation);
-				return {
-					startPoint: (event as MouseClickEvent).worldMouseLocation,
-				};
+				const startPoint = getPointFromEvent(null, event as PointInputEvent);
+				setAngleGuideOriginPoint(startPoint);
+				return { startPoint };
 			}),
 			[MoveAction.COPY_SELECTION_BEFORE_MOVE]: assign(({ context }) => {
 				const selectedEntities = getSelectedEntities();
@@ -211,7 +227,9 @@ export const moveToolStateMachine = createMachine(
 				return {
 					startPoint: context.startPoint,
 					// Make a copy of the selected entities before moving them, so we can restore them when the user cancels the move action
-					originalSelectedEntities: compact(selectedEntities.map((entity) => cloneKeepingLook(entity, true))),
+					originalSelectedEntities: compact(
+						selectedEntities.map((entity) => cloneKeepingLook(entity, true))
+					),
 					movedEntities: selectedEntities,
 				};
 			}),
@@ -220,11 +238,13 @@ export const moveToolStateMachine = createMachine(
 					throw new Error('[MOVE] Calling draw temp move line without a start point');
 				}
 
-				const endPointTemp = (event as DrawEvent).drawController.getWorldMouseLocation();
+				const endPointTemp = getPointFromEvent(context.startPoint, event as DrawEvent);
 
 				// Move the entities to the new location
 				// Draw all selected entities according to translation vector, so the user gets visual feedback of where the entities will be moved;
-				const movedEntities = context.originalSelectedEntities.map((entity) => cloneKeepingLook(entity, true));
+				const movedEntities = context.originalSelectedEntities.map((entity) =>
+					cloneKeepingLook(entity, true)
+				);
 				moveEntities(
 					movedEntities,
 					endPointTemp.x - context.startPoint.x,
@@ -248,7 +268,8 @@ export const moveToolStateMachine = createMachine(
 				}
 
 				// Move the entities one final time
-				const currentEndPoint = (event as MouseClickEvent).worldMouseLocation;
+				// 클릭 · 거리 · 절대 · 상대 좌표(키보드)
+				const currentEndPoint = getPointFromEvent(context.startPoint, event as PointInputEvent);
 				moveEntities(
 					context.originalSelectedEntities,
 					currentEndPoint.x - context.startPoint.x,
diff --git a/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts b/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts
index 46888d7a5..c2930e017 100644
--- a/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts
@@ -10,7 +10,15 @@ import {
 	setShouldDrawHelpers,
 } from '../state';
 import { Tool } from '../tools';
-import type { DrawEvent, MouseClickEvent, StateEvent, ToolContext } from './tool.types';
+import type {
+	DrawEvent,
+	MouseClickEvent,
+	NumberInputEvent,
+	PointInputEvent,
+	StateEvent,
+	ToolContext,
+} from './tool.types';
+import { getPointFromEvent } from '../helpers/get-point-from-event';
 import { assign, createMachine, sendTo } from 'xstate';
 import { selectToolStateMachine } from './select-tool';
 import type { Entity } from '../entities/Entity';
@@ -41,6 +49,7 @@ export enum RotateAction {
 	COPY_SELECTION_BEFORE_ROTATE = 'COPY_SELECTION_BEFORE_ROTATE',
 	DRAW_TEMP_ROTATE_ENTITIES = 'DRAW_TEMP_ROTATE_ENTITIES',
 	ROTATE_SELECTION = 'ROTATE_SELECTION',
+	ROTATE_BY_ANGLE = 'ROTATE_BY_ANGLE',
 	DESELECT_ENTITIES = 'DESELECT_ENTITIES',
 	RESTORE_ORIGINAL_ENTITIES = 'RESTORE_ORIGINAL_ENTITIES',
 }
@@ -147,6 +156,10 @@ export const rotateToolStateMachine = createMachine(
 						actions: [RotateAction.RECORD_ROTATION_ORIGIN],
 						target: RotateState.WAITING_FOR_ANGLE_START_POINT,
 					},
+					ABSOLUTE_POINT_INPUT: {
+						actions: [RotateAction.RECORD_ROTATION_ORIGIN],
+						target: RotateState.WAITING_FOR_ANGLE_START_POINT,
+					},
 					ESC: {
 						actions: RotateAction.DESELECT_ENTITIES,
 						target: RotateState.INIT,
@@ -166,6 +179,15 @@ export const rotateToolStateMachine = createMachine(
 						],
 						target: RotateState.WAITING_FOR_ANGLE_END_POINT,
 					},
+					NUMBER_INPUT: {
+						// 각도(도) 바로 — 반시계 +
+						actions: [
+							RotateAction.COPY_SELECTION_BEFORE_ROTATE,
+							RotateAction.ROTATE_BY_ANGLE,
+							RotateAction.DESELECT_ENTITIES,
+						],
+						target: RotateState.WAITING_FOR_SELECTION,
+					},
 					ESC: {
 						actions: RotateAction.RESTORE_ORIGINAL_ENTITIES,
 						target: RotateState.INIT,
@@ -204,11 +226,9 @@ export const rotateToolStateMachine = createMachine(
 				setShouldDrawHelpers(true);
 			},
 			[RotateAction.RECORD_ROTATION_ORIGIN]: assign(({ context, event }): RotateContext => {
-				setAngleGuideOriginPoint((event as MouseClickEvent).worldMouseLocation);
-				return {
-					...context,
-					rotationOrigin: (event as MouseClickEvent).worldMouseLocation,
-				};
+				const rotationOrigin = getPointFromEvent(null, event as PointInputEvent);
+				setAngleGuideOriginPoint(rotationOrigin);
+				return { ...context, rotationOrigin };
 			}),
 			[RotateAction.RECORD_ROTATION_ANGLE_START_POINT]: assign(
 				({ context, event }): RotateContext => {
@@ -232,7 +252,9 @@ export const rotateToolStateMachine = createMachine(
 				return {
 					...context,
 					// Make a copy of the selected entities before rotating them, so we can restore them when the user cancels the rotate action
-					originalSelectedEntities: compact(selectedEntities.map((entity) => cloneKeepingLook(entity, true))),
+					originalSelectedEntities: compact(
+						selectedEntities.map((entity) => cloneKeepingLook(entity, true))
+					),
 				};
 			}),
 			[RotateAction.DRAW_TEMP_ROTATE_ENTITIES]: ({ context, event }) => {
@@ -279,6 +301,19 @@ export const rotateToolStateMachine = createMachine(
 				setGhostHelperEntities([]);
 				setSelectedEntityIds([]);
 			},
+			[RotateAction.ROTATE_BY_ANGLE]: ({ context, event }) => {
+				if (!context.rotationOrigin) {
+					throw new Error('[ROTATE] Calling rotate by angle without a rotation origin');
+				}
+				const radians = ((event as NumberInputEvent).value * Math.PI) / 180;
+				const rotatedEntities = compact(
+					context.originalSelectedEntities.map((entity) => cloneKeepingLook(entity, true))
+				);
+				for (const entity of rotatedEntities) entity.rotate(context.rotationOrigin, radians);
+				addEntities(rotatedEntities, true);
+				setGhostHelperEntities([]);
+				setSelectedEntityIds([]);
+			},
 			[RotateAction.DESELECT_ENTITIES]: assign(({ context }): RotateContext => {
 				setGhostHelperEntities([]);
 				setSelectedEntityIds([]);
diff --git a/M02_MasterTemplete/DataFlow/M02_DF_Diagram.ts b/M02_MasterTemplete/DataFlow/M02_DF_Diagram.ts
index 76d4b028c..0623a007e 100644
--- a/M02_MasterTemplete/DataFlow/M02_DF_Diagram.ts
+++ b/M02_MasterTemplete/DataFlow/M02_DF_Diagram.ts
@@ -7,6 +7,7 @@
  * 그리기만(바꾸는 것은 부른 쪽이 Model 로) · 순수 부분은 `M02_DF_Diagram_Parts.ts`.
  * ========================================================================== */
 
+import { wheelZoomsIn } from "../../A00_Common/touch_bridge";
 import { createButton, el, showConfirmDialog } from "@ui/ui_template_elements";
 import type { CfBox, CfKind, CfLogic, CfPill, CfPort } from "./M02_DF_Model";
 import {
@@ -454,7 +455,7 @@ export function renderDiagram(
     "wheel",
     (ev) => {
       ev.preventDefault();
-      setZoom(st.zoom * (ev.deltaY < 0 ? 1.1 : 1 / 1.1), ev.clientX, ev.clientY);
+      setZoom(st.zoom * (wheelZoomsIn(ev) ? 1.1 : 1 / 1.1), ev.clientX, ev.clientY); // ☰ [설정] 방향(332)
     },
     { passive: false },
   );
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Labor_Diagram.ts b/M02_MasterTemplete/M02_MasterTemplete_Labor_Diagram.ts
index b966ba85c..1d653f7a2 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Labor_Diagram.ts
+++ b/M02_MasterTemplete/M02_MasterTemplete_Labor_Diagram.ts
@@ -7,6 +7,7 @@
  * ========================================================================== */
 
 import { currentLanguageIndex } from "@ui/ui_template_locale";
+import { wheelZoomsIn } from "../A00_Common/touch_bridge";
 import { createButton, el } from "@ui/ui_template_elements";
 import { formatMoney } from "../M01_MasterData/M01_MasterData_UI_Logic_Money";
 import "./M02_MasterTemplete_Labor_Diagram.css";
@@ -313,7 +314,7 @@ function mountShell(host: HTMLElement): State {
       if (!e.ctrlKey) return;
       e.preventDefault();
       const r = viewport.getBoundingClientRect();
-      zoomAt(st, e.deltaY < 0 ? 1.1 : 1 / 1.1, e.clientX - r.left, e.clientY - r.top);
+      zoomAt(st, wheelZoomsIn(e) ? 1.1 : 1 / 1.1, e.clientX - r.left, e.clientY - r.top); // ☰ [설정] 방향(332)
     },
     { passive: false },
   );
diff --git a/resources/tester/cad/keyboard-chain.test.ts b/resources/tester/cad/keyboard-chain.test.ts
index be66f34d4..af5d1a5d6 100644
--- a/resources/tester/cad/keyboard-chain.test.ts
+++ b/resources/tester/cad/keyboard-chain.test.ts
@@ -148,3 +148,52 @@ describe("331-1 각도 고정 → 길이", () => {
     expect(getActiveToolActor()?.getSnapshot()?.context.values).toHaveLength(2);
   });
 });
+
+/** 선 (x1,y1)-(x2,y2) 하나를 키보드로 그리고 고름 */
+const drawAndSelect = (x1: number, y1: number, x2: number, y2: number) => {
+  type(controller, "l");
+  type(controller, `${x1},${y1}`);
+  type(controller, `${x2},${y2}`);
+  key(controller, "Escape");
+  key(controller, "Escape");
+  setSelectedEntityIds(getEntities().map((entity) => entity.id));
+};
+
+describe("331-2 이동 · 복사 · 회전 키보드 값", () => {
+  it("MOVE · 0,0 · @10,0 → 오른쪽 10", () => {
+    drawAndSelect(0, 0, 20, 0);
+    type(controller, "move");
+    type(controller, "0,0");
+    type(controller, "@10,0");
+    const drawn = lines();
+    expect(drawn).toHaveLength(1);
+    expectXy(drawn[0].start, 10, 0);
+    expectXy(drawn[0].end, 30, 0);
+  });
+
+  it("COPY · 0,0 · <0 · 5 → 원본 + 오른쪽 5", () => {
+    drawAndSelect(0, 0, 20, 0);
+    type(controller, "copy");
+    type(controller, "0,0");
+    type(controller, "<0");
+    type(controller, "5");
+    const starts = lines()
+      .map((segment) => segment.start.x)
+      .sort((a, b) => a - b);
+    expect(starts).toHaveLength(2);
+    expect(starts[0]).toBeCloseTo(0, 3);
+    expect(starts[1]).toBeCloseTo(5, 3);
+  });
+
+  it("ROTATE · 0,0 · 90 → 반시계 90°", () => {
+    drawAndSelect(10, 0, 20, 0);
+    type(controller, "rotate");
+    type(controller, "0,0");
+    type(controller, "90");
+    const drawn = lines();
+    expect(drawn).toHaveLength(1);
+    expectXy(drawn[0].start, 0, 10);
+    expectXy(drawn[0].end, 0, 20);
+    expect(toast.error).not.toHaveBeenCalled();
+  });
+});
diff --git a/resources/tester/helper_218_1_loupe.cjs b/resources/tester/helper_218_1_loupe.cjs
index ac649dbf7..031fa6f4d 100644
--- a/resources/tester/helper_218_1_loupe.cjs
+++ b/resources/tester/helper_218_1_loupe.cjs
@@ -15,7 +15,9 @@ function load(file) {
       ? {}
       : p.endsWith("key_shortcut") // 공용 키 판정(214-2)도 그 자리에서 트랜스파일
         ? load(path.join(ROOT, "A00_Common", "key_shortcut.ts"))
-        : require(p);
+        : p.endsWith("input_prefs") // 휠 방향(332 · Node = 기본 당김)
+          ? load(path.join(ROOT, "A00_Common", "input_prefs.ts"))
+          : require(p);
   new Function("exports", "module", "require", js)(box.exports, box, req);
   return box.exports;
 }
@@ -100,30 +102,30 @@ r.consts = {
   r.listeners = win.calls.map((c) => [c.type, c.capture]);
 }
 {
-  // 220-1 휠 — 켜 있는 동안만 배율 · 스크롤 막음 · 켤 때마다 2배
+  // 220-1 휠 — 켜 있는 동안만 배율 · 스크롤 막음 · 켤 때마다 2배 · 확대 = 당김(deltaY > 0 · 332 기본)
   const { win, view } = setup();
   const wheel = (deltaY) => win.fire("wheel", { deltaY });
   const zoomLog = () => view.log.filter((l) => l[0] === "zoom").map((l) => l[1]);
-  const offEv = wheel(-100);
+  const offEv = wheel(100);
   const offState = { prevented: offEv.prevented, stopped: offEv.stopped, log: view.log.length };
   win.fire("keydown", { code: "KeyZ" });
-  const up = wheel(-100);
+  const up = wheel(100);
   const upState = { prevented: up.prevented, stopped: up.stopped, zoom: zoomLog().at(-1) };
-  wheel(100);
-  wheel(100);
+  wheel(-100);
+  wheel(-100);
   const down = zoomLog().at(-1);
   wheel(0); // 가로 굴림 — 배율 그대로 · 스크롤은 막음
   const flat = zoomLog().at(-1);
-  for (let i = 0; i < 30; i++) wheel(-50);
+  for (let i = 0; i < 30; i++) wheel(50);
   const max = zoomLog().at(-1);
-  for (let i = 0; i < 30; i++) wheel(120);
+  for (let i = 0; i < 30; i++) wheel(-120);
   const min = zoomLog().at(-1);
   win.fire("keyup", { code: "KeyZ" });
   const n = zoomLog().length;
-  const afterOff = wheel(-100);
+  const afterOff = wheel(100);
   const afterOffZoomed = zoomLog().length !== n;
   win.fire("keydown", { code: "KeyZ" });
-  wheel(-100);
+  wheel(100);
   r.wheel = {
     off: offState,
     up: upState,
@@ -134,17 +136,17 @@ r.consts = {
     afterOff: { prevented: afterOff.prevented, stopped: afterOff.stopped, zoomed: afterOffZoomed },
     reopen: zoomLog().at(-1), // 다시 켜면 2배에서 한 칸
     pure: [
-      m.nextLoupeZoom(2, -1),
       m.nextLoupeZoom(2, 1),
-      m.nextLoupeZoom(6, -1),
-      m.nextLoupeZoom(1.5, 1),
+      m.nextLoupeZoom(2, -1),
+      m.nextLoupeZoom(6, 1),
+      m.nextLoupeZoom(1.5, -1),
     ],
   };
   // 길게 누름으로 켠 동안도 같음
   const b = setup();
   b.win.fire("mousedown", { button: 2, buttons: 2 });
   b.win.tick(400);
-  const press = b.win.fire("wheel", { deltaY: -1 });
+  const press = b.win.fire("wheel", { deltaY: 1 });
   r.wheel.press = { prevented: press.prevented, zoom: b.view.log.at(-1) };
 }
 {
@@ -298,7 +300,7 @@ r.origin = {
     // 켜진 채 CAD 위로(mouseover · mousemove 둘 다) — 숨김 · 휠 안 막음 · 나오면 배율 그대로 보임
     const { win, view } = setup();
     win.fire("keydown", { code: "KeyZ" });
-    win.fire("wheel", { deltaY: -100 }); // 2.25
+    win.fire("wheel", { deltaY: 100 }); // 2.25
     win.fire("mouseover", { target: cad });
     const hidden = last(view);
     const n = view.log.length;
diff --git a/resources/tester/helper_266_detail_home.cjs b/resources/tester/helper_266_detail_home.cjs
index a5dfdbdbf..9b02f78cb 100644
--- a/resources/tester/helper_266_detail_home.cjs
+++ b/resources/tester/helper_266_detail_home.cjs
@@ -28,6 +28,7 @@ function loadTs(full) {
   new Function("exports", "module", "require", js)(box.exports, box, localRequire);
   return box.exports;
 }
+STUBS["./input_prefs"] = loadTs(path.join(ROOT, "A00_Common", "input_prefs.ts")); // 휠 방향(332 · Node = 기본 당김)
 const metrics = loadTs(path.join(B06, "B06_Section_UI_Cross_View_Metrics.ts"));
 const { attachSvgZoomPan } = loadTs(path.join(ROOT, "A00_Common", "b_svg_zoom_pan.ts"));
 
diff --git a/resources/tester/helper_input_prefs.cjs b/resources/tester/helper_input_prefs.cjs
new file mode 100644
index 000000000..860064bb5
--- /dev/null
+++ b/resources/tester/helper_input_prefs.cjs
@@ -0,0 +1,63 @@
+/* PLAN 332-1 단위검증 헬퍼 — 휠 방향 읽기 층(`A00_Common/input_prefs.ts`) · 손가락 다리(`touch_bridge.ts`)
+ * · 등록표 키(`b_page_state.ts`)를 그 자리에서 트랜스파일해 Node 로 돌림. 가짜 localStorage 로 설정을 바꿔 봄.
+ * 결과 = 표준출력 JSON 한 벌. 짝 = `test_input_prefs.py`. */
+const fs = require("fs");
+const path = require("path");
+const ts = require(path.join(__dirname, "..", "..", "config", "node_modules", "typescript"));
+
+const ROOT = path.join(__dirname, "..", "..");
+const A00 = path.join(ROOT, "A00_Common");
+function load(file) {
+  const js = ts.transpileModule(fs.readFileSync(file, "utf8"), {
+    compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
+  }).outputText;
+  const box = { exports: {} };
+  const req = (p) => (p === "./input_prefs" ? prefs : {});
+  new Function("exports", "module", "require", js)(box.exports, box, req);
+  return box.exports;
+}
+
+const out = {};
+// ① Node(저장소 없음) — 불러올 때 window 를 안 만지고 기본값
+const prefs = load(path.join(A00, "input_prefs.ts"));
+const bridge = load(path.join(A00, "touch_bridge.ts"));
+const page = load(path.join(A00, "b_page_state.ts"));
+const sample = () => ({
+  prefs: prefs.inputPrefs(),
+  pull: prefs.wheelIn(100),
+  push: prefs.wheelIn(-100),
+  mouseCtrl: prefs.wheelEventIn({ ctrlKey: true, deltaY: 100 }),
+  padSpread: prefs.wheelEventIn({ ctrlKey: true, deltaY: -3.5 }),
+  padPinch: prefs.wheelEventIn({ ctrlKey: true, deltaY: 3.5 }),
+  fingerSpread: prefs.wheelEventIn({ ctrlKey: true, deltaY: -9.5 }, true),
+  bridgePull: bridge.wheelZoomsIn({ ctrlKey: false, deltaY: 100 }),
+});
+out.node = { key: prefs.INPUT_PREFS_KEY, default: prefs.DEFAULT_INPUT_PREFS, ...sample() };
+out.registryKey = page.stateKey("input-prefs");
+out.registryEntry = page.STATE_REGISTRY["input-prefs"];
+
+// ② 브라우저 저장소 흉내 — 값을 바꾸면 다음 부름부터 바로 따름
+const store = new Map();
+globalThis.localStorage = {
+  getItem: (k) => (store.has(k) ? store.get(k) : null),
+  setItem: (k, v) => store.set(k, String(v)),
+  removeItem: (k) => store.delete(k),
+};
+const set = (v) => store.set(prefs.INPUT_PREFS_KEY, v);
+set(JSON.stringify({ wheelZoom: "push", cadAliases: { line: ["ll", 3], ARC: [] } }));
+out.push = sample();
+set("{깨짐");
+out.broken = sample();
+set(JSON.stringify({ wheelZoom: "sideways" }));
+out.unknown = sample();
+store.delete(prefs.INPUT_PREFS_KEY);
+out.empty = sample();
+// ③ 불러오는 동안 저장소가 던지는 브라우저(사생활 보호) — 기본값
+globalThis.localStorage = {
+  getItem: () => {
+    throw new Error("blocked");
+  },
+};
+out.blocked = sample();
+
+process.stdout.write(JSON.stringify(out));
diff --git a/resources/tester/test_220_1_loupe_wheel.py b/resources/tester/test_220_1_loupe_wheel.py
index a1c5bda7d..e70b9c4da 100644
--- a/resources/tester/test_220_1_loupe_wheel.py
+++ b/resources/tester/test_220_1_loupe_wheel.py
@@ -34,10 +34,10 @@ def test_지름_360_배율_한도(r):
     assert (c["zoom"], c["zoomMin"], c["zoomMax"], c["zoomStep"]) == (2, 1.5, 6, 0.25)
 
 
-def test_휠_위_크게_아래_작게_한도(r):
+def test_휠_당김_크게_밀기_작게_한도(r):  # 332 기본 = 당김 확대
     w = r["wheel"]
-    assert w["up"]["zoom"] == 2.25  # 위로 한 칸
-    assert w["down"] == 1.75  # 아래로 두 칸
+    assert w["up"]["zoom"] == 2.25  # 당겨 한 칸
+    assert w["down"] == 1.75  # 밀어 두 칸
     assert w["flat"] == 1.75  # 가로 굴림은 그대로
     assert w["max"] == 6 and w["min"] == 1.5
     assert w["pure"] == [2.25, 1.75, 6, 1.5]
diff --git a/resources/tester/test_244_8_b08_milestone_no_scroll.py b/resources/tester/test_244_8_b08_milestone_no_scroll.py
index 17c980d2a..e3c7ecce2 100644
--- a/resources/tester/test_244_8_b08_milestone_no_scroll.py
+++ b/resources/tester/test_244_8_b08_milestone_no_scroll.py
@@ -20,7 +20,10 @@ def _read(rel):
 
 
 def _node(script):
-    src = IMPORTS.sub("", _read("A00_Common/b_svg_zoom_pan.ts"))
+    # 휠 방향 읽기 층(332) 을 앞에 붙임 — Node 엔 저장소가 없어 기본(당기면 확대)
+    src = _read("A00_Common/input_prefs.ts") + IMPORTS.sub(
+        "", _read("A00_Common/b_svg_zoom_pan.ts")
+    )
     result = subprocess.run(
         ["node", "--experimental-strip-types", "--no-warnings",
          "--input-type=module-typescript", "-e", src + "\n" + script],
diff --git a/resources/tester/test_input_prefs.py b/resources/tester/test_input_prefs.py
new file mode 100644
index 000000000..c9c2cd0b7
--- /dev/null
+++ b/resources/tester/test_input_prefs.py
@@ -0,0 +1,113 @@
+"""PLAN 332-1 — 휠 확대 방향 한 설정(`A00_Common/input_prefs.ts`) · 모든 휠 화면이 그 판정을 거침.
+
+· 기본 = 당김(휠을 몸 쪽으로 = 확대) · 밀기 저장 뒤 뒤집힘 · 깨짐 · 모르는 값 · 막힌 저장소 · Node = 기본
+· 핀치(트랙패드 · 손가락)는 설정과 상관없이 늘 벌리면 확대
+· 키 = 등록표 `input-prefs`(pref · global) 와 같은 글자
+짝: `helper_input_prefs.cjs`(실제 TS 를 Node 로 돌림).
+"""
+
+from __future__ import annotations
+
+import json
+import os
+import re
+import subprocess
+
+import pytest
+
+HERE = os.path.dirname(__file__)
+ROOT = os.path.join(HERE, "..", "..")
+
+pytestmark = pytest.mark.skipif(
+    not os.path.isdir(os.path.join(ROOT, "config", "node_modules")),
+    reason="프론트엔드 의존성 미설치",
+)
+
+
+def _read(rel: str) -> str:
+    with open(os.path.join(ROOT, rel), encoding="utf-8") as f:
+        return f.read()
+
+
+@pytest.fixture(scope="module")
+def r() -> dict:
+    proc = subprocess.run(  # noqa: S603 — 고정 실행 파일
+        ["node", os.path.join(HERE, "helper_input_prefs.cjs")],
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=60,
+    )
+    assert proc.returncode == 0, proc.stderr
+    return json.loads(proc.stdout)
+
+
+PULL = {"pull": True, "push": False, "mouseCtrl": True, "bridgePull": True}
+PINCH = {"padSpread": True, "padPinch": False, "fingerSpread": True}
+
+
+def _pick(case: dict, keys: dict) -> dict:
+    return {k: case[k] for k in keys}
+
+
+def test_Node_기본_당김(r):
+    n = r["node"]
+    assert n["default"] == {"wheelZoom": "pull", "cadAliases": {}}
+    assert n["prefs"] == n["default"]
+    assert _pick(n, PULL) == PULL and _pick(n, PINCH) == PINCH
+
+
+def test_밀기_저장_뒤_뒤집힘_핀치는_그대로(r):
+    p = r["push"]
+    assert p["prefs"]["wheelZoom"] == "push"
+    assert _pick(p, PULL) == {"pull": False, "push": True, "mouseCtrl": False, "bridgePull": False}
+    assert _pick(p, PINCH) == PINCH  # 벌리면 확대는 설정과 상관없음
+    # 별칭 = 대문자 · 글자 아닌 것 · 빈 목록 버림
+    assert p["prefs"]["cadAliases"] == {"LINE": ["LL"]}
+
+
+@pytest.mark.parametrize("case", ["broken", "unknown", "empty", "blocked"])
+def test_깨짐_모르는_값_없음_막힘_기본(r, case):
+    c = r[case]
+    assert c["prefs"] == {"wheelZoom": "pull", "cadAliases": {}}
+    assert _pick(c, PULL) == PULL and _pick(c, PINCH) == PINCH
+
+
+def test_등록표_키(r):
+    assert r["node"]["key"] == r["registryKey"] == "aislo:pref:input-prefs"
+    assert r["registryEntry"] == {"bucket": "pref", "scope": "global"}
+
+
+def test_읽기_층은_의존_없음_불러올_때_window_안_만짐():
+    src = _read("A00_Common/input_prefs.ts")
+    assert not re.search(r"^import ", src, re.M)
+    assert "window." not in src
+
+
+# 휠 줌 자리 — 직접 박은 방향(`deltaY < 0 ?` · `deltaY > 0 ?` · `-ev.deltaY`)이 없고 공용 판정을 부름
+WHEEL_SITES = {
+    "A00_Common/touch_bridge.ts": "wheelEventIn(e, isPinchWheel(e))",
+    "A00_Common/b_svg_zoom_pan.ts": "wheelEventIn(event)",
+    "B04_PreProcess/B04_PreProcess_UI_Camera.ts": "wheelEventIn(event)",
+    "M02_MasterTemplete/DataFlow/M02_DF_Diagram.ts": "wheelZoomsIn(ev)",
+    "M02_MasterTemplete/M02_MasterTemplete_Labor_Diagram.ts": "wheelZoomsIn(e)",
+    "ui_template/ui_template_loupe.ts": "wheelIn(deltaY)",
+    "A00_Common/spreadsheet/spreadsheet_grid.ts": "wheelZoomsIn(ev)",
+    # wheelZoomsIn 을 거쳐 따라오는 셋
+    "B04_PreProcess/B04_PreProcess_UI_MapViewer.ts": "wheelZoomsIn(event)",
+    "B05_Profile/B05_Profile_UI_Drainage_Interact.ts": "wheelZoomsIn(event)",
+    "B05_Profile/B05_Profile_UI_RouteEdit_Input.ts": "wheelZoomsIn(event)",
+}
+
+
+@pytest.mark.parametrize("rel", sorted(WHEEL_SITES))
+def test_휠_자리_공용_판정(rel):
+    src = _read(rel)
+    assert WHEEL_SITES[rel] in src
+    assert not re.search(r"deltaY [<>] 0 \?", src), rel
+    assert "-ev.deltaY" not in src and "Math.sign(-deltaY)" not in src
+
+
+def test_700줄_안():
+    for rel in WHEEL_SITES:
+        assert _read(rel).count("\n") <= 700, rel
diff --git a/ui_template/ui_template_loupe.ts b/ui_template/ui_template_loupe.ts
index 16479963a..68a0cfee4 100644
--- a/ui_template/ui_template_loupe.ts
+++ b/ui_template/ui_template_loupe.ts
@@ -14,6 +14,7 @@
 
 import "./ui_template_loupe.css";
 import { keyLetter } from "../A00_Common/key_shortcut";
+import { wheelIn } from "../A00_Common/input_prefs";
 
 /** 원 지름(px) */
 export const LOUPE_DIAMETER = 360;
@@ -86,9 +87,9 @@ export function isCadTarget(target: unknown): boolean {
   return !!(target as Partial<Element> | null)?.closest?.(LOUPE_SKIP);
 }
 
-/** 휠 한 번 뒤 배율 — 위로 굴림(deltaY < 0) = 크게 · 한도 안 */
+/** 휠 한 번 뒤 배율 — ☰ [설정] 방향(332 · 기본 당김 = deltaY > 0 = 크게) · 한도 안 */
 export function nextLoupeZoom(zoom: number, deltaY: number): number {
-  const step = Math.sign(-deltaY) * LOUPE_ZOOM_STEP;
+  const step = deltaY ? (wheelIn(deltaY) ? 1 : -1) * LOUPE_ZOOM_STEP : 0;
   return Math.max(LOUPE_ZOOM_MIN, Math.min(LOUPE_ZOOM_MAX, zoom + step));
 }