diff --git a/B05_Profile/B05_Profile_Engine_Sections.py b/B05_Profile/B05_Profile_Engine_Sections.py
index d1491a4b..f804f7e1 100644
--- a/B05_Profile/B05_Profile_Engine_Sections.py
+++ b/B05_Profile/B05_Profile_Engine_Sections.py
@@ -98,9 +98,39 @@ def _load_design_curves(project_root: Path) -> list[dict[str, Any]]:
     )
 
 
+# ── 횡단 이름 규칙(한 벌) — 파일 이름 · B07 도면 id · 찾기가 모두 이것을 씀 ────────────
+#: 이름 속 측점 글 — 정수 m `00120` · 소수 측점 `00119.80`
+CROSS_KEY_PATTERN = r"(\d+(?:\.\d{2})?)"
+
+
+def cross_station(chainage_m: float) -> int | float:
+    """측점 → 이름 열쇠 값 — 정수 m(0.005m 안)면 int(옛 이름 · 키 그대로) · 아니면 소수 2자리."""
+    value = round(float(chainage_m), 2)
+    whole = round(value)
+    return int(whole) if abs(value - whole) < 0.005 else value
+
+
+def cross_key(chainage_m: float) -> str:
+    """이름 속 측점 글 — `00120`(정수 · 옛 이름 그대로) · `00119.80`(소수 측점)."""
+    station = cross_station(chainage_m)
+    return f"{station:05d}" if isinstance(station, int) else f"{station:08.2f}"
+
+
+def parse_cross_key(text: str) -> int | float:
+    """`cross_key` 되읽기."""
+    return cross_station(float(text))
+
+
 def cross_filename(chainage_m: float) -> str:
     """측점 chainage에 대응하는 횡단면 파일명(단일 규칙)."""
-    return f"cross_{int(round(float(chainage_m))):05d}m.json"
+    return f"cross_{cross_key(chainage_m)}m.json"
+
+
+def find_cross_file(cross_dir: Path, chainage_m: float) -> Path:
+    """읽기용 — 지금 이름이 없으면 옛 정수 m 이름(소수 측점이 정수로 붙던 옛 프로젝트)."""
+    path = cross_dir / cross_filename(chainage_m)
+    legacy = cross_dir / f"cross_{int(round(float(chainage_m))):05d}m.json"
+    return path if path.exists() or not legacy.exists() else legacy
 
 
 def prune_stale_cross_files(cross_dir: Path, stations: list[Any]) -> set[str]:
@@ -109,8 +139,9 @@ def prune_stale_cross_files(cross_dir: Path, stations: list[Any]) -> set[str]:
     측점 정보가 비어 있으면 오삭제를 피하기 위해 아무것도 지우지 않고
     빈 집합을 반환한다(호출부는 빈 집합이면 필터를 생략한다).
     """
+    # 옛 프로젝트는 소수 측점 파일이 정수 m 이름이라 찾기 규칙(find_cross_file)으로 가려야 안 지워짐
     valid = {
-        cross_filename(station["chainage_m"])
+        find_cross_file(cross_dir, station["chainage_m"]).name
         for station in stations
         if isinstance(station, dict) and isinstance(station.get("chainage_m"), (int, float))
     }
diff --git a/B05_Profile/B05_Profile_Engine_Sections_Core.py b/B05_Profile/B05_Profile_Engine_Sections_Core.py
index a76490ee..72279681 100644
--- a/B05_Profile/B05_Profile_Engine_Sections_Core.py
+++ b/B05_Profile/B05_Profile_Engine_Sections_Core.py
@@ -341,34 +341,19 @@ def generate_sections(
         if 0.0 <= float(chainage) <= total
     }
     if extras:
-        # 횡단 파일명이 정수 미터 반올림이라(cross_filename) 한 정수 미터에 측점은 하나만 둔다.
-        # 관 · 구조물 자체 측점은 소수 그대로 — 격자 측점과 같은 정수 미터면 격자 대신 그 측점을
-        # 쓴다(시 · 종점 격자만 그대로 두고 라벨을 얹음). 비정규끼리 겹치면 앞선 것만 남긴다.
-        # ponytail: 파일명이 정수 미터인 동안의 가드. 소수 이름 규칙으로 바꾸면 지운다.
+        # 관 · 구조물 자리마다 그 소수 측점의 횡단을 따로 둔다(2026-09-29 사용자 확정) — 이름은
+        # 소수 2자리(cross_00119.80m · cross_filename). 같은 이름이 되는 0.005m 안 겹침만 하나로:
+        # 격자와 겹치면 격자 측점에 라벨을 얹고, 비정규끼리 겹치면 앞선 것만 남긴다.
         grid = [round(float(value), 6) for value in station_chainage]
-        ends = {grid[0], grid[-1]}
-        buckets = {int(round(value)): value for value in grid}
-        taken: set[int] = set()
-        dropped: set[float] = set()
         snapped: dict[float, str] = {}
         for chainage in sorted(extras):
-            bucket = int(round(chainage))
-            if bucket in taken:
+            near = next((value for value in grid if abs(value - chainage) < 0.005), chainage)
+            if any(abs(near - taken) < 0.005 for taken in snapped):
                 continue
-            taken.add(bucket)
-            regular = buckets.get(bucket)
-            if regular in ends:
-                snapped[regular] = extras[chainage]
-                continue
-            if regular is not None:
-                dropped.add(regular)
-            snapped[chainage] = extras[chainage]
+            snapped[near] = extras[chainage]
         extras = snapped
         station_chainage = np.unique(
-            np.r_[
-                np.array([value for value in grid if value not in dropped], dtype=np.float64),
-                np.array(sorted(extras), dtype=np.float64),
-            ]
+            np.r_[station_chainage, np.array(sorted(extras), dtype=np.float64)]
         )
     station_xy = _interpolate_xy(points, route_chainage, station_chainage)
     tangents = np.vstack(
diff --git a/B05_Profile/B05_Profile_UI_IrregularStations.ts b/B05_Profile/B05_Profile_UI_IrregularStations.ts
index e3837b76..798caaf8 100644
--- a/B05_Profile/B05_Profile_UI_IrregularStations.ts
+++ b/B05_Profile/B05_Profile_UI_IrregularStations.ts
@@ -10,6 +10,7 @@
  * chainage_m = 측점번호 × 측점간격(m) + 잔여거리(m). 측점간격은 `getInterval()`로 실시간 조회한다.
  * ========================================================================== */
 
+import { stationPartsLabel } from "../common_util/common_util_station";
 import {
   ESCAPE_ROUTE_DEFAULT_WIDTH_M,
   ESCAPE_ROUTE_WIDTHS_M,
@@ -130,9 +131,9 @@ export function irregularStationId(id: string): string {
   return `irregular:${id}`;
 }
 
-/** 측점번호+잔여거리 표기 (예: 3+18.0). */
+/** 측점번호+잔여거리 표기 (예: 3+18 · 공용 표기 한 벌 — 거리는 정수로 보이기만). */
 export function irregularLabel(station: IrregularStation): string {
-  return `${station.station}+${station.remainder.toFixed(1)}`;
+  return stationPartsLabel(station.station, station.remainder);
 }
 
 function field(labelText: string, input: HTMLElement): HTMLLabelElement {
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts
index 2ed105aa..65065cb9 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Cross.ts
@@ -24,7 +24,7 @@ import {
   designHalfWidths,
   summarizeCross,
 } from "./B05_Profile_UI_RouteEdit_Cross_Draw";
-import { formatStation } from "./B05_Profile_Util_Station";
+import { stationLabel as formatStation } from "../common_util/common_util_station";
 
 export interface CrossPreviewParams {
   projectId: string;
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Measure.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Measure.ts
index 0d05da59..b7cffb06 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Measure.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Measure.ts
@@ -13,7 +13,7 @@
 
 import { fetchRouteElevations } from "./B05_Profile_Api_Replan";
 import { routePointAtScreen, type RoutePointHit } from "./B05_Profile_UI_RouteEdit_Input";
-import { formatStation } from "./B05_Profile_Util_Station";
+import { stationLabel as formatStation } from "../common_util/common_util_station";
 
 type Vertex = [number, number];
 
diff --git a/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts b/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts
index c4ed86a3..7e603d50 100644
--- a/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts
+++ b/B05_Profile/B05_Profile_UI_RouteEdit_Render.ts
@@ -26,7 +26,7 @@ import { contourBandRect } from "./B05_Profile_UI_RouteEdit_Input";
 import type { CrossWatch } from "./B05_Profile_UI_RouteEdit_Cross";
 import { stationFrameAt } from "./B05_Profile_UI_RouteEdit_Frame";
 import type { MeasureMark } from "./B05_Profile_UI_RouteEdit_Measure";
-import { formatStation } from "./B05_Profile_Util_Station";
+import { stationLabel as formatStation } from "../common_util/common_util_station";
 
 /** 노드 반지름(px). */
 const NODE_R = 4;
diff --git a/B05_Profile/B05_Profile_UI_Structures_List.ts b/B05_Profile/B05_Profile_UI_Structures_List.ts
index 02a8b203..6f3d43b2 100644
--- a/B05_Profile/B05_Profile_UI_Structures_List.ts
+++ b/B05_Profile/B05_Profile_UI_Structures_List.ts
@@ -14,7 +14,7 @@ import {
   type StructureType,
 } from "./B05_Profile_Api_Structures";
 import type { PipeFacilityItem } from "./B05_Profile_UI_Structures_Panel";
-import { formatStation } from "./B05_Profile_Util_Station";
+import { stationLabel as formatStation } from "../common_util/common_util_station";
 import { readSummaryItem, summaryTooltip } from "../common_util/common_util_summary_item";
 
 export interface StructureListParams {
diff --git a/B05_Profile/B05_Profile_UI_Structures_Marks.ts b/B05_Profile/B05_Profile_UI_Structures_Marks.ts
index 1c52a483..6b96079a 100644
--- a/B05_Profile/B05_Profile_UI_Structures_Marks.ts
+++ b/B05_Profile/B05_Profile_UI_Structures_Marks.ts
@@ -20,7 +20,7 @@ import {
   type StructureType,
 } from "./B05_Profile_Api_Structures";
 import { numberDuplicateNames } from "./B05_Profile_UI_Structures_List";
-import { formatStation } from "./B05_Profile_Util_Station";
+import { stationLabel as formatStation } from "../common_util/common_util_station";
 
 /** 마크를 잡았다고 볼 여유(px) — 시작점에서 이만큼 **벗어나기 전에는** 이동으로
  *  보지 않고 시각적으로도 움직이지 않는다. 예전 10px 누적 방식은 손떨림이 쌓여
diff --git a/B05_Profile/B05_Profile_UI_Structures_Panel.ts b/B05_Profile/B05_Profile_UI_Structures_Panel.ts
index b67b31a0..78f40336 100644
--- a/B05_Profile/B05_Profile_UI_Structures_Panel.ts
+++ b/B05_Profile/B05_Profile_UI_Structures_Panel.ts
@@ -38,13 +38,19 @@ import {
   loadPipeForm as loadPipeFormInto,
 } from "./B05_Profile_UI_Structures_Panel_Commit";
 import { renderStructureList } from "./B05_Profile_UI_Structures_List";
-import { formatStation } from "./B05_Profile_Util_Station";
+import { stationLabel as formatStation } from "../common_util/common_util_station";
 
 /** 공개 타입·표시 상수는 700줄 제한으로 `_Structures_Panel_Types` 로 옮겼다 —
  *  옛 임포트 경로가 그대로 동작하도록 여기서 다시 내보낸다(2026-09-04). */
 export { GROUP_LABELS } from "./B05_Profile_UI_Structures_Panel_Types";
 export type { PipeFacilityItem, StructuresSection } from "./B05_Profile_UI_Structures_Panel_Types";
-import { DEFAULT_INTERVAL_LENGTH_M, GROUP_LABELS } from "./B05_Profile_UI_Structures_Panel_Types";
+import {
+  DEFAULT_INTERVAL_LENGTH_M,
+  GROUP_LABELS,
+  hasComputedRange,
+  readBeforeOption,
+  readLengthOption,
+} from "./B05_Profile_UI_Structures_Panel_Types";
 import type {
   PipeFacilityItem,
   StructuresCallbacks,
@@ -92,35 +98,12 @@ export function createStructuresSection(
     return type.managed_by ? (type.type_id as PipeFacility) : null;
   }
 
-  /** 구간을 직접 입력하지 않는 타입인가 — C군 사면안정 5종처럼 B05 길이 옵션이
-   *  있으면 시작·종료 입력 칸을 없애고 기준 측점 + 길이로 범위를 계산해 보여만
-   *  준다(2026-08-19 사용자 지시). */
-  function hasComputedRange(type: StructureType | null): boolean {
-    return (
-      !!type &&
-      !type.managed_by &&
-      type.placement === "interval" &&
-      type.options.some((option) => option.key === "length_m" && isB05Option(option))
-    );
-  }
-
-  /** 길이 옵션(length_m) 값(m). 비었거나 0 이하면 null — 범위를 계산할 수 없다. */
   function readLengthM(): number | null {
-    const entry = optionInputs.find((input) => input.key === "length_m");
-    if (!entry || entry.isEmpty()) return null;
-    const length = Number(entry.read());
-    return Number.isFinite(length) && length > 0 ? length : null;
+    return readLengthOption(optionInputs);
   }
 
-  /** 기준측점 전(before_m, m) — 기준 측점에서 시점 쪽으로 물러나는 몫. 비우면 0
-   *  (= 기준이 곧 시작). 총길이를 넘길 수 없다 — 넘치면 총길이로 자른다(후 0). */
   function readBeforeM(): number {
-    const entry = optionInputs.find((input) => input.key === "before_m");
-    if (!entry || entry.isEmpty()) return 0;
-    const before = Number(entry.read());
-    if (!Number.isFinite(before) || before < 0) return 0;
-    const length = readLengthM();
-    return length !== null && before > length ? length : before;
+    return readBeforeOption(optionInputs);
   }
 
   /** 기준측점 전·후 중 나중에 고친 쪽 — 길이가 바뀔 때 이쪽 값을 지키며 재배분한다. */
diff --git a/B05_Profile/B05_Profile_UI_Structures_Panel_Types.ts b/B05_Profile/B05_Profile_UI_Structures_Panel_Types.ts
index cde03078..9c7cabc5 100644
--- a/B05_Profile/B05_Profile_UI_Structures_Panel_Types.ts
+++ b/B05_Profile/B05_Profile_UI_Structures_Panel_Types.ts
@@ -13,7 +13,11 @@ import type {
   PipeSource,
 } from "../B04_PreProcess/B04_PreProcess_Api_Fetch";
 import type { FacilityAttributes, FacilityOptionsForm } from "./B05_Profile_UI_Drainage_Facility";
-import type { StructureInstance, StructureType } from "./B05_Profile_Api_Structures";
+import {
+  isB05Option,
+  type StructureInstance,
+  type StructureType,
+} from "./B05_Profile_Api_Structures";
 import type { SummaryItem } from "../common_util/common_util_summary_item";
 
 /** 구조물군 표시 이름. 리스트 기호(A~G)만으로는 무엇인지 알기 어렵다.
@@ -124,3 +128,36 @@ export interface StructuresCallbacks {
    */
   onReveal?: () => void;
 }
+
+type OptionEntry = { key: string; read: () => string | number; isEmpty: () => boolean };
+
+/** 길이 옵션(length_m) 값(m). 비었거나 0 이하면 null — 범위를 계산할 수 없다. */
+export function readLengthOption(inputs: OptionEntry[]): number | null {
+  const entry = inputs.find((input) => input.key === "length_m");
+  if (!entry || entry.isEmpty()) return null;
+  const length = Number(entry.read());
+  return Number.isFinite(length) && length > 0 ? length : null;
+}
+
+/** 기준측점 전(before_m, m) — 기준 측점에서 시점 쪽으로 물러나는 몫. 비우면 0
+ *  (= 기준이 곧 시작). 총길이를 넘길 수 없다 — 넘치면 총길이로 자른다(후 0). */
+export function readBeforeOption(inputs: OptionEntry[]): number {
+  const entry = inputs.find((input) => input.key === "before_m");
+  if (!entry || entry.isEmpty()) return 0;
+  const before = Number(entry.read());
+  if (!Number.isFinite(before) || before < 0) return 0;
+  const length = readLengthOption(inputs);
+  return length !== null && before > length ? length : before;
+}
+
+/** 구간을 직접 입력하지 않는 타입인가 — C군 사면안정 5종처럼 B05 길이 옵션이
+ *  있으면 시작·종료 입력 칸을 없애고 기준 측점 + 길이로 범위를 계산해 보여만
+ *  준다(2026-08-19 사용자 지시). */
+export function hasComputedRange(type: StructureType | null): boolean {
+  return (
+    !!type &&
+    !type.managed_by &&
+    type.placement === "interval" &&
+    type.options.some((option) => option.key === "length_m" && isB05Option(option))
+  );
+}
diff --git a/B05_Profile/B05_Profile_Util_Station.ts b/B05_Profile/B05_Profile_Util_Station.ts
index b6859a0f..60a862d2 100644
--- a/B05_Profile/B05_Profile_Util_Station.ts
+++ b/B05_Profile/B05_Profile_Util_Station.ts
@@ -4,7 +4,8 @@
  *
  * 구조물 위치는 저장은 누가거리(m)로 하되 **화면 입출력은 측점번호+잔여거리**로 한다
  * (2026-08-17 사용자 확정). 근거: 중심선측량 측점 20m + 구조물 지점 보조말뚝
- * (지식DB 설계제원_총괄 §8). 표기 예: "3+18.0" = 측점 3번에서 18.0m.
+ * (지식DB 설계제원_총괄 §8). 표기 예: "3+18" = 측점 3번에서 18m — 화면 표기는
+ * `common_util_station.stationLabel` 한 벌(거리는 정수로 보이기만 · 값은 소수).
  *
  * 변환식은 비정규 측점 UI(`B05_Profile_UI_IrregularStations.ts`)와 같다 —
  * chainage_m = 측점번호 × 측점간격(m) + 잔여거리(m). 측점간격은 호출 시점에 받는다
@@ -33,12 +34,6 @@ export function chainageToStation(
   return { station, remainder };
 }
 
-/** 누가거리 → "3+18.0" 표기. */
-export function formatStation(chainageM: number, intervalM: number): string {
-  const { station, remainder } = chainageToStation(chainageM, intervalM);
-  return `${station}+${remainder.toFixed(1)}`;
-}
-
 /** "3+18.0" · "3 + 18" · "76.5"(누가거리 직접) 입력을 누가거리로 해석한다.
  *  해석 불가하면 null — 호출부가 칸을 붉히고 진행을 멈춘다. */
 export function parseStationText(text: string, intervalM: number): number | null {
diff --git a/B06_Section/B06_Section_Engine_SampleExtend.py b/B06_Section/B06_Section_Engine_SampleExtend.py
index 4e1d5d84..5cfe32ce 100644
--- a/B06_Section/B06_Section_Engine_SampleExtend.py
+++ b/B06_Section/B06_Section_Engine_SampleExtend.py
@@ -19,7 +19,7 @@ from typing import Any, Callable
 
 import numpy as np
 
-from B05_Profile.B05_Profile_Engine_Sections import cross_filename
+from B05_Profile.B05_Profile_Engine_Sections import find_cross_file
 from B06_Section.B06_Section_Engine_Design import (
     _SLOPE_CLOSE_TOLERANCE_M,
     compute_cross_design,
@@ -175,7 +175,7 @@ def extend_unclosed_sections(
                 recomputed[key] = design[key]
         section["samples"] = samples
         section["design"] = recomputed
-        cross_path = cross_dir / cross_filename(chainage)
+        cross_path = find_cross_file(cross_dir, chainage)
         if cross_path.is_file():
             stored = json.loads(cross_path.read_text(encoding="utf-8"))
             atomic_write_json(cross_path, {**stored, "samples": samples})
diff --git a/B06_Section/B06_Section_Repository.py b/B06_Section/B06_Section_Repository.py
index 72807284..b9d243f6 100644
--- a/B06_Section/B06_Section_Repository.py
+++ b/B06_Section/B06_Section_Repository.py
@@ -406,23 +406,23 @@ async def merge_cross_section_design_by_round(
     connection: aiomysql.Connection,
     *,
     route_id: int,
-    chainage_int: int,
+    chainage: float,
     patch: dict[str, Any],
 ) -> bool:
-    """정수 chainage(m) 측점의 data.design에 patch를 병합 저장한다.
+    """측점(도면 id 측점 — 정수 m 또는 소수 2자리)의 data.design에 patch를 병합 저장한다.
 
     B07 도면 확정(전체 설계 재계산 결과) 및 확정 해제(status 되돌림)에서 사용한다.
-    도면 ID가 정수 m라 ROUND로 매칭한다. 갱신 여부를 반환한다.
+    이름 규칙(cross_key)의 0.005m 안으로 매칭한다. 갱신 여부를 반환한다.
     """
     async with connection.cursor() as cursor:
         await cursor.execute(
             """
             SELECT id, data FROM cross_sections
-            WHERE route_id = %s AND ROUND(chainage_m) = %s
+            WHERE route_id = %s AND ABS(chainage_m - %s) < 0.005
             ORDER BY id DESC
             LIMIT 1
             """,
-            (route_id, chainage_int),
+            (route_id, chainage),
         )
         row = await cursor.fetchone()
         if not row:
@@ -445,21 +445,21 @@ async def merge_cross_section_design_by_round(
 
 
 async def get_cross_section_design(
-    connection: aiomysql.Connection, route_id: int, chainage_int: int
+    connection: aiomysql.Connection, route_id: int, chainage: float
 ) -> dict[str, Any] | None:
-    """정수 chainage(m)에 해당하는 측점의 잠정 설계(data.design)를 반환한다.
+    """도면 id 측점(cross_{정수m}m · cross_{소수2자리}m)의 잠정 설계(data.design)를 반환한다.
 
-    B08이 도면 ID(cross_{정수m}m)로 조회하므로 ROUND로 근사 매칭한다.
+    이름 규칙(cross_key)의 0.005m 안으로 매칭한다.
     """
     async with connection.cursor() as cursor:
         await cursor.execute(
             """
             SELECT data FROM cross_sections
-            WHERE route_id = %s AND ROUND(chainage_m) = %s
+            WHERE route_id = %s AND ABS(chainage_m - %s) < 0.005
             ORDER BY id DESC
             LIMIT 1
             """,
-            (route_id, chainage_int),
+            (route_id, chainage),
         )
         row = await cursor.fetchone()
     if not row or not row[0]:
diff --git a/B06_Section/B06_Section_Router_Design.py b/B06_Section/B06_Section_Router_Design.py
index f570baf2..b3104c32 100644
--- a/B06_Section/B06_Section_Router_Design.py
+++ b/B06_Section/B06_Section_Router_Design.py
@@ -5,7 +5,7 @@ import logging
 from pathlib import Path
 from typing import Any
 
-from B05_Profile.B05_Profile_Engine_Sections import cross_filename
+from B05_Profile.B05_Profile_Engine_Sections import find_cross_file
 from B05_Profile.B05_Profile_Structures_Repository import load_structures
 from B05_Profile.B05_Profile_Structures_Schema import structure_type_map
 from B06_Section.B06_Section_Engine_Culvert import load_culvert_sets
@@ -309,7 +309,7 @@ def read_cross_design_inputs(
     design_elevation = design_elevation_from_longitudinal(longitudinal, chainage_m)
     suggested = pavement.get(round(chainage_m, 3), False)
     cross_dir = longitudinal_path.parent.parent / "cross_sections"
-    cross_path = (cross_dir / cross_filename(chainage_m)).resolve()
+    cross_path = find_cross_file(cross_dir, chainage_m).resolve()
     if cross_dir.resolve() not in cross_path.parents or not cross_path.is_file():
         raise FileNotFoundError("해당 측점의 횡단 상세 파일을 찾을 수 없습니다.")
     cross = json.loads(cross_path.read_text(encoding="utf-8"))
@@ -492,7 +492,7 @@ def compute_default_designs(
     ford_drops = ford_surface_drops(root)
     results: list[tuple[float, dict[str, Any]]] = []
     for chainage_m in chainages:
-        cross_path = cross_dir / cross_filename(chainage_m)
+        cross_path = find_cross_file(cross_dir, chainage_m)
         if not cross_path.is_file():
             continue
         try:
diff --git a/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py b/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py
index 7a67125f..17b07270 100644
--- a/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py
+++ b/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py
@@ -9,6 +9,7 @@
 import re
 from typing import Any
 
+from B05_Profile.B05_Profile_Engine_Sections import cross_key
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
     CROSS_MM,
     CROSS_TABLE_LAYER_ID,
@@ -38,7 +39,7 @@ from config.config_system import DRAWING_SCALE_CROSS
 
 # 장 도면 id — 측점 도면(cross_00020m)과 겹치지 않게 `s`를 끼운다(cross_s00020m).
 # 옛 순번 형식(cross_s01)도 읽어 준다 — 이미 확정한 매니페스트가 그 이름을 갖고 있다.
-CROSS_SHEET_ID = re.compile(r"cross_s(\d{2,})m?")
+CROSS_SHEET_ID = re.compile(r"cross_s(\d{2,}(?:\.\d{2})?)m?")
 
 # 블록 사이 여백(mm)과 테두리 여유 — build_cross_drawing의 테두리 값과 맞춘다.
 # 여백 0 = 이웃 칸의 테두리가 맞닿는다(2026-09-04 사용자 지시 — 박스 사이 간격 제거).
@@ -151,7 +152,7 @@ def _slots(cell_w: float, cell_h: float, rows: int, count: int) -> list[list[flo
     return slots
 
 
-def plan_cross_sheets(blocks: list[tuple[int, float, float]]) -> list[dict[str, Any]]:
+def plan_cross_sheets(blocks: list[tuple[int | float, float, float]]) -> list[dict[str, Any]]:
     """(측점, 폭, 높이) 목록을 A1 장으로 나눈다.
 
     한 장 안의 칸은 모두 같은 크기(그 장 최대 블록 기준)이고 빈 곳은 여백으로 둔다.
@@ -170,7 +171,7 @@ def plan_cross_sheets(blocks: list[tuple[int, float, float]]) -> list[dict[str,
                 # id는 **시작 측점**으로 짓는다. 순번(`cross_s01`)으로 지으면 B06 설계가
                 # 바뀌어 한 장에 담기는 측점 수가 달라졌을 때 같은 이름이 다른 구간을
                 # 가리키고, 옛 확정 표시가 그대로 새 구간에 붙는다(2026-09-01 지적).
-                "id": f"cross_s{chainages[0]:05d}m",
+                "id": f"cross_s{cross_key(chainages[0])}m",
                 "number": len(sheets) + 1,
                 "chainages": chainages,
                 "rows": max(rows, 1),
diff --git a/B07_DesignDetail/B07_DesignDetail_Router.py b/B07_DesignDetail/B07_DesignDetail_Router.py
index 592477a5..d07804e4 100644
--- a/B07_DesignDetail/B07_DesignDetail_Router.py
+++ b/B07_DesignDetail/B07_DesignDetail_Router.py
@@ -13,6 +13,11 @@ from fastapi import APIRouter
 from fastapi.responses import JSONResponse
 
 from B03_FileInput.B03_FileInput_Repository import get_project_storage_relative_path
+from B05_Profile.B05_Profile_Engine_Sections import (
+    CROSS_KEY_PATTERN,
+    cross_station,
+    parse_cross_key,
+)
 from B06_Section.B06_Section_Repository import (
     get_confirmed_route_context,
     get_cross_section_design,
@@ -65,7 +70,7 @@ from config.config_db import get_db_pool
 logger = logging.getLogger(__name__)
 router = APIRouter(prefix="/api/projects", tags=["B07 Design Detail"])
 
-_CROSS_ID = re.compile(r"^cross_(\d+)m$")
+_CROSS_ID = re.compile(rf"^cross_{CROSS_KEY_PATTERN}m$")
 _LONG_ID = re.compile(r"^longitudinal(?:_(\d+))?$")
 
 
@@ -249,13 +254,13 @@ async def title_block_fields(project_id: UUID) -> dict[str, str]:
     return {key: str(value) for key, value in fields.items() if value}
 
 
-async def _designs_by_chainage(route_id: int) -> dict[int, dict[str, Any]]:
+async def _designs_by_chainage(route_id: int) -> dict[int | float, dict[str, Any]]:
     """노선 전체의 측점별 설계 지정 {측점(m): design}. 장 배치·목록이 함께 쓴다."""
     pool = get_db_pool()
     async with pool.acquire() as connection:
         rows = await get_cross_section_designs(connection, route_id)
     return {
-        int(round(float(row["chainage_m"]))): row["design"]
+        cross_station(row["chainage_m"]): row["design"]
         for row in rows
         if isinstance(row, dict) and isinstance(row.get("design"), dict)
     }
@@ -304,7 +309,7 @@ async def get_design_drawing(
             pool = get_db_pool()
             async with pool.acquire() as connection:
                 design = await get_cross_section_design(
-                    connection, route_id, int(cross_match.group(1))
+                    connection, route_id, parse_cross_key(cross_match.group(1))
                 )
             source_design = design
         elif CROSS_SHEET_ID.fullmatch(drawing_id):
@@ -448,25 +453,25 @@ async def confirm_design_drawing(
         # 트림과 사용자 입력(측구 끔)이 사라졌다(2026-09-14 936be972 실측 62측점 · 브레인 ②).
         cross_match = _CROSS_ID.fullmatch(drawing_id)
         pool = get_db_pool()
-        targets: list[int] = []
+        targets: list[int | float] = []
         if sheet is not None:
             targets = list(sheet["chainages"])
         elif item.kind == "cross" and cross_match:
-            targets = [int(cross_match.group(1))]
+            targets = [parse_cross_key(cross_match.group(1))]
         confirmed_designs = [
-            (chainage_int, {**designs[chainage_int], "status": "confirmed"})
-            for chainage_int in targets
-            if designs.get(chainage_int)
+            (chainage, {**designs[chainage], "status": "confirmed"})
+            for chainage in targets
+            if designs.get(chainage)
         ]
 
         async with pool.acquire() as connection:
             await connection.begin()
             try:
-                for chainage_int, _design in confirmed_designs:
+                for chainage, _design in confirmed_designs:
                     await merge_cross_section_design_by_round(
                         connection,
                         route_id=route_id,
-                        chainage_int=chainage_int,
+                        chainage=chainage,
                         patch={"status": "confirmed"},
                     )
                 async with connection.cursor() as cursor:
@@ -519,9 +524,9 @@ async def invalidate_design_drawing(
         await asyncio.to_thread(_invalidate_drawing, project_root, drawing_id)
 
         cross_match = _CROSS_ID.fullmatch(drawing_id)
-        stale: list[int] = []
+        stale: list[int | float] = []
         if cross_match:
-            stale = [int(cross_match.group(1))]
+            stale = [parse_cross_key(cross_match.group(1))]
         elif CROSS_SHEET_ID.fullmatch(drawing_id):
             plan = await asyncio.to_thread(
                 _cross_sheet_plan, project_root, longitudinal_path, designs
@@ -533,11 +538,11 @@ async def invalidate_design_drawing(
             await connection.begin()
             try:
                 # 확정 도면을 편집하면 담긴 측점 설계도 잠정 상태로 되돌린다.
-                for chainage_int in stale:
+                for chainage in stale:
                     await merge_cross_section_design_by_round(
                         connection,
                         route_id=route_id,
-                        chainage_int=chainage_int,
+                        chainage=chainage,
                         patch={"status": "provisional"},
                     )
                 async with connection.cursor() as cursor:
diff --git a/B07_DesignDetail/B07_DesignDetail_Router_Support.py b/B07_DesignDetail/B07_DesignDetail_Router_Support.py
index 08d99000..4287f1b2 100644
--- a/B07_DesignDetail/B07_DesignDetail_Router_Support.py
+++ b/B07_DesignDetail/B07_DesignDetail_Router_Support.py
@@ -9,6 +9,12 @@ import re
 from pathlib import Path
 from typing import Any
 
+from B05_Profile.B05_Profile_Engine_Sections import (
+    CROSS_KEY_PATTERN,
+    cross_station,
+    find_cross_file,
+    parse_cross_key,
+)
 from B06_Section.B06_Section_Engine_Design import compute_cross_design, curve_widening_args
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
     DRAWING_FORMAT,
@@ -94,7 +100,7 @@ logger = logging.getLogger(__name__)
 
 _STAGE_DIR = "B07_DesignDetail"
 
-_CROSS_ID = re.compile(r"^cross_(\d+)m$")
+_CROSS_ID = re.compile(rf"^cross_{CROSS_KEY_PATTERN}m$")
 _LONG_ID = re.compile(r"^longitudinal(?:_(\d+))?$")
 # 노선 전장에 한 장씩만 나오는 도면 — 라우터가 원본 자료를 따로 실어 넘긴다.
 MASS_HAUL_ID = "mass_haul"
@@ -107,7 +113,7 @@ CROSS_STANDARD_ID = "cross_standard"
 def _drawing_list(
     project_root: Path,
     longitudinal_path: Path,
-    designs: dict[int, dict[str, Any]] | None = None,
+    designs: dict[int | float, dict[str, Any]] | None = None,
 ) -> list[DesignDrawingItem]:
     longitudinal = _read_json(longitudinal_path)
     station_by_chainage = _station_map(longitudinal)
@@ -226,7 +232,7 @@ def _store_drawing_numbers(project_root: Path, drawings: list[DesignDrawingItem]
 def _cross_sheet_plan(
     project_root: Path,
     longitudinal_path: Path,
-    designs: dict[int, dict[str, Any]] | None = None,
+    designs: dict[int | float, dict[str, Any]] | None = None,
 ) -> list[dict[str, Any]]:
     """측점 도면을 A1 장으로 나눈 계획 — 목록과 도면 생성이 같은 결과를 쓴다.
 
@@ -239,8 +245,9 @@ def _cross_sheet_plan(
         match = _CROSS_ID.fullmatch(path.stem)
         if not match:
             continue
-        chainage = int(match.group(1))
         source = _read_json(path)
+        # 측점은 파일 속 값으로 — 옛 프로젝트는 소수 측점 파일이 정수 m 이름이라 이름으로 못 앎
+        chainage = cross_station(source.get("chainage_m") or parse_cross_key(match.group(1)))
         design = (designs or {}).get(chainage)
         design_line = _cross_design_line(longitudinal_path, source, design)
         width, height = section_block_size(source, design_line)
@@ -352,11 +359,11 @@ def _cross_design_line(
 def _cross_section_input(
     longitudinal_path: Path,
     longitudinal: dict[str, Any],
-    chainage: int,
+    chainage: int | float,
     design: dict[str, Any] | None,
 ) -> dict[str, Any] | None:
     """한 측점의 장 배치 입력(원본·계획선·수량표·제목)을 만든다."""
-    path = longitudinal_path.parent.parent / "cross_sections" / f"cross_{chainage:05d}m.json"
+    path = find_cross_file(longitudinal_path.parent.parent / "cross_sections", chainage)
     if not path.is_file():
         return None
     source = _read_json(path)
@@ -565,9 +572,12 @@ def _read_drawing(
     if CROSS_SHEET_ID.fullmatch(drawing_id):
         return _read_cross_sheet(project_root, longitudinal_path, drawing_id, stored_design)
 
-    if not _CROSS_ID.fullmatch(drawing_id):
+    cross_match = _CROSS_ID.fullmatch(drawing_id)
+    if not cross_match:
         raise ValueError("올바르지 않은 도면 ID입니다.")
-    path = longitudinal_path.parent.parent / "cross_sections" / f"{drawing_id}.json"
+    path = find_cross_file(
+        longitudinal_path.parent.parent / "cross_sections", parse_cross_key(cross_match.group(1))
+    )
     if not path.is_file():
         raise FileNotFoundError("요청한 횡단도를 찾을 수 없습니다.")
     source = _read_json(path)
diff --git a/B07_DesignDetail/B07_DesignDetail_Router_Support_Io.py b/B07_DesignDetail/B07_DesignDetail_Router_Support_Io.py
index ad9630c9..00303a40 100644
--- a/B07_DesignDetail/B07_DesignDetail_Router_Support_Io.py
+++ b/B07_DesignDetail/B07_DesignDetail_Router_Support_Io.py
@@ -9,7 +9,7 @@ import re
 from pathlib import Path
 from typing import Any
 
-from B05_Profile.B05_Profile_Engine_Sections import prune_stale_cross_files
+from B05_Profile.B05_Profile_Engine_Sections import cross_station, prune_stale_cross_files
 
 logger = logging.getLogger(__name__)
 
@@ -47,12 +47,12 @@ def _cross_files(longitudinal_path: Path, longitudinal: dict[str, Any]) -> list[
     return files
 
 
-def _station_map(longitudinal: dict[str, Any]) -> dict[int, dict[str, Any]]:
+def _station_map(longitudinal: dict[str, Any]) -> dict[int | float, dict[str, Any]]:
     stations = longitudinal.get("stations", [])
     if not isinstance(stations, list):
         return {}
     return {
-        round(float(station.get("chainage_m", 0))): station
+        cross_station(station.get("chainage_m", 0)): station
         for station in stations
         if isinstance(station, dict)
     }
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Items.py b/M02_MasterTemplete/M02_MasterTemplete_Items.py
new file mode 100644
index 00000000..e6953465
--- /dev/null
+++ b/M02_MasterTemplete/M02_MasterTemplete_Items.py
@@ -0,0 +1,130 @@
+"""M02 층 집계표 항목 — 회사 · 개인 층 빈 뼈대 · 항목 목록 · 항목 복사(PLAN 21-1 · 21-2).
+
+항목 = 구조물집계표조합(SS) 한 줄 — 그 열의 일위대가(UA) · 자재조합(UM) ·
+도번 SD · 면적번 SA · 재료번 SM.
+층 폴더(시스템 · 회사 · 개인)는 모양이 같아 저장소 함수를 `store.at(층 폴더)` 안에서 그대로 부름.
+권한은 부르는 쪽(`M02_MasterTemplete_Router_Items.py`) 몫 — 여기는 폴더와 파일만.
+"""
+
+from __future__ import annotations
+
+import json
+from pathlib import Path
+from typing import Any
+
+from common_util.common_util_json import atomic_write_json
+from M02_MasterTemplete import M02_MasterTemplete_Matset as matset
+from M02_MasterTemplete import M02_MasterTemplete_Store as store
+
+# 21-1 목록 칸 — SS 줄에서 그대로(키는 `key`)
+ITEM_FIELDS = (
+    "열",
+    "종류",
+    "분류1",
+    "분류2",
+    "분류3",
+    "단위",
+    "일위대가",
+    "자재조합",
+    "도번",
+    "면적번",
+    "재료번",
+)
+
+
+def ensure(folder: Path) -> bool:
+    """회사 · 개인 층 첫 진입 — 빈 집계표(열 0 · 층 이름 · 줄 머리는 시스템 것) ·
+    조합 장부(`다음` 1) · 자재 조합 빈 표 · 종류 폴더.
+    이미 집계표가 있으면 아무것도 안 함(시스템 층은 늘 있음)."""
+    table = Path(folder) / "table" / f"{store.STRUCTURE_TABLE}.json"
+    if table.is_file():
+        return False
+    system = json.loads((store.FOLDER / "table" / f"{store.STRUCTURE_TABLE}.json").read_bytes())
+    doc = {
+        **system,
+        "열": [],
+        "줄": [{**r, "값": {}} for r in system.get("줄", []) if isinstance(r, dict)],
+        "합계줄": [],
+        "보기": {},
+    }
+    with store.at(folder):
+        for kind in store.KINDS:
+            (Path(folder) / kind).mkdir(parents=True, exist_ok=True)
+        with store._LOCK:
+            if table.is_file():  # 그 사이 다른 요청이 만듦
+                return False
+            atomic_write_json(table, doc)
+        store.sync_combos()
+        mat = Path(folder) / matset.FILE
+        if not mat.is_file():
+            atomic_write_json(mat, matset._load()[0])
+    return True
+
+
+def items(folder: Path) -> list[dict[str, Any]]:
+    """그 층 항목 — SS 줄마다 `{key, 열, 종류, 분류1~3, 단위, 일위대가, 자재조합,
+    도번, 면적번, 재료번}`."""
+    with store.at(folder):
+        rows = store.read_combos().get("줄", [])
+    return [{"key": r.get("키"), **{k: r.get(k) for k in ITEM_FIELDS}} for r in rows]
+
+
+def _fresh_id(want: str, used: set[str]) -> str:
+    out, n = want, 2
+    while out in used:
+        out, n = f"{want}_{n}", n + 1
+    return out
+
+
+def copy_item(source: Path, target: Path, key: str, origin: dict[str, Any]) -> dict[str, Any]:
+    """다른 층 항목(SS `key`) → `target` 층 새 열 하나 — 머리 · 단위 · 일위대가 · 바인딩 그대로 ·
+    도면 · 면적산출 · 재료산출 내용(알약 연결 포함) · 자재 조합 줄(새 UM) 복사 ·
+    새 번호 · 새 SS 키 ·
+    열 `본뜬` = `origin`(원래 층 · 주인 · 키). 돌려줌 `{key, 열, 이름}`."""
+    with store.at(source):
+        row = next((r for r in store.read_combos().get("줄", []) if r.get("키") == key), None)
+        if row is None:
+            raise store.StoreError(404, f"없는 항목 「{key}」")
+        col_id = row["열"]
+        col = next(c for c in store._structure_columns() if c["id"] == col_id)
+        docs = {}
+        for kind, _, _, _ in store.PARTS:
+            try:
+                docs[kind] = store.read(kind, col_id)["문서"]
+            except store.StoreError:
+                pass  # 없는 파일은 새 층에서 빈 문서로 섬
+        um = None
+        if col.get("자재조합"):
+            try:
+                um = matset.one(col["자재조합"])
+            except store.StoreError:
+                um = None  # 가리키던 줄이 없으면 비움
+    ensure(target)
+    with store.at(target):
+        new_um = None
+        if um:
+            names = matset.listing()["줄"]
+            taken = {str(r.get("이름") or "") for r in names}
+            name, n = str(um.get("이름") or key), 2
+            base = name
+            while name in taken:
+                name, n = f"{base} ({n})", n + 1
+            got = {k: um.get(k) for k in ("담은자재", "소유", "비고")}
+            new_um = matset.create({**got, "이름": name, "본뜬키": None})["키"]
+        table = store.read("table", store.STRUCTURE_TABLE)
+        doc = table["문서"]
+        new_id = _fresh_id(col_id, {c.get("id") for c in doc.get("열", []) if isinstance(c, dict)})
+        made = {**json.loads(json.dumps(col)), "id": new_id, "자재조합": new_um, "본뜬": origin}
+        doc["열"] = [*doc.get("열", []), made]
+        store.write("table", store.STRUCTURE_TABLE, table["판"], doc)  # 빈 세 파일 · 번호 · SS
+        for kind, got in docs.items():
+            number = store._KEY[kind]
+            have = store.read(kind, new_id)["문서"]
+            body = {k: v for k, v in got.items() if k != "계산값"}
+            body = {**body, "열": new_id, number: have.get(number)}
+            if kind in store.SHEETS:
+                body = store._server_values(body)
+            with store._LOCK:
+                atomic_write_json(store._path(kind, new_id), body)
+        ss = next(r for r in store.read_combos()["줄"] if r.get("열") == new_id)
+    return {"key": ss["키"], "열": new_id, "이름": " ".join(h for h in store._heads(made) if h)}
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Matset.py b/M02_MasterTemplete/M02_MasterTemplete_Matset.py
index 39f416f6..df87e2fc 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Matset.py
+++ b/M02_MasterTemplete/M02_MasterTemplete_Matset.py
@@ -22,7 +22,7 @@ _HEAD = "UM"
 
 def _load() -> tuple[dict[str, Any], str]:
     """(표, 판) — 파일이 없으면 빈 표 · 판 빈 글."""
-    path = store.FOLDER / FILE
+    path = store.root() / FILE
     if not path.is_file():
         return {"그룹": mmc.GROUP, "판": "2026", "비고": [], "다음": 1, "줄": []}, ""
     raw = path.read_bytes()
@@ -95,7 +95,7 @@ def _save(doc: dict, version: str) -> str:
     """틀 검사 → 판이 같을 때만 씀 → 새 판."""
     if errors := mmc.check_form(FILE, doc):
         raise store.StoreError(422, {"errors": errors})
-    path = store.FOLDER / FILE
+    path = store.root() / FILE
     with store._LOCK:
         have = store.version_of(path.read_bytes()) if path.is_file() else ""
         if have != (version or ""):
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Router_Items.py b/M02_MasterTemplete/M02_MasterTemplete_Router_Items.py
new file mode 100644
index 00000000..1e8fa03b
--- /dev/null
+++ b/M02_MasterTemplete/M02_MasterTemplete_Router_Items.py
@@ -0,0 +1,263 @@
+"""M02 층 집계표 API — `/api/m02/layers/{layer}/…` · 항목 목록 · 항목 복사(PLAN 21-1 · 21-2).
+
+⚠ 등록은 `main.py`(로그인만) · 층 권한은 여기서(`Router_Layers._layer_dir` 와 같은 규칙):
+    system    읽기 = 로그인 누구나(항목 고르기) · 쓰기 = SYSTEM_ADMIN
+    company   읽기 = 같은 회사 · 쓰기 = 회사 관리자(ADMIN · 마스터 · SYSTEM_ADMIN)
+    personal  읽기 · 쓰기 = 본인(SYSTEM_ADMIN 은 누구나) · 회사 없음 = 쓰기 409 「회사부터 등록」
+옛 길(`/api/m02/structures/…` 등 · `M02_MasterTemplete_Router.py`)은 시스템 층 별칭으로 그대로.
+회사 · 개인 층은 처음 부를 때 빈 뼈대를 만듦(`Items.ensure`).
+"""
+
+from __future__ import annotations
+
+from pathlib import Path
+from typing import Any, Literal
+
+from fastapi import APIRouter, Depends, HTTPException, Query
+from pydantic import BaseModel
+
+from common_util.common_util_auth import verify_session
+from M02_MasterTemplete import M02_MasterTemplete_Branch as branch
+from M02_MasterTemplete import M02_MasterTemplete_Items as items_store
+from M02_MasterTemplete import M02_MasterTemplete_Matset as matset
+from M02_MasterTemplete import M02_MasterTemplete_Store as store
+from M02_MasterTemplete import M02_Template_Layers as layers
+from M02_MasterTemplete.M02_MasterTemplete_Router import (
+    BranchBody,
+    MaterialBranchBody,
+    MatsetBody,
+    UseComboBody,
+)
+
+router = APIRouter(prefix="/api/m02", tags=["M02 MasterTemplete Items"])
+
+Layer = Literal["system", "company", "personal"]
+Session = dict[str, Any]
+NO_COMPANY = "회사부터 등록 — 회사 없이는 회사 · 개인 구조물 집계표를 만들 수 없음"
+
+
+class CopyItemBody(BaseModel):
+    from_layer: Literal["system", "company"]
+    from_owner: str | None = None
+    key: str
+
+
+def _admin(session: Session) -> bool:
+    return session.get("role") == "SYSTEM_ADMIN"
+
+
+def _company_admin(session: Session) -> bool:
+    return session.get("role") in ("ADMIN", "SYSTEM_ADMIN") or bool(session.get("is_master"))
+
+
+def _owner(session: Session, layer: str, owner: str | None) -> str | None:
+    """층 주인 글 — 회사 `{회사}` · 개인 `{회사}/{사용자}` · 시스템 None ·
+    남의 것은 SYSTEM_ADMIN 만."""
+    if layer == "system":
+        return None
+    company, user = session.get("company_id"), session.get("user_id")
+    mine = str(company) if layer == "company" else f"{company}/{user}"
+    if owner in (None, "", mine):
+        return None if company is None else mine
+    if not _admin(session):
+        raise HTTPException(status_code=403, detail="다른 회사 · 다른 사람의 구조물 집계표입니다.")
+    return owner
+
+
+def _folder(layer: str, owner: str | None) -> Path:
+    if layer == "system":
+        return store.FOLDER
+    try:
+        if layer == "company":
+            return layers.company_dir(owner)
+        company, user = str(owner).split("/", 1)
+        return layers.personal_dir(company, user)
+    except ValueError as error:
+        raise HTTPException(status_code=400, detail=f"층 주인 모양 — {error}") from error
+
+
+def _root(session: Session, layer: str, owner: str | None = None, write: bool = False) -> Path:
+    """층 폴더(권한까지) — 회사 · 개인은 없으면 빈 뼈대를 만듦. 회사 없는 사람: 쓰기 409."""
+    if layer == "system":
+        if write and not _admin(session):
+            raise HTTPException(status_code=403, detail="마스터 템플릿은 시스템 관리자만 고침.")
+        return store.FOLDER
+    who = _owner(session, layer, owner)
+    if who is None:
+        raise HTTPException(status_code=409, detail=NO_COMPANY)
+    if write and layer == "company" and not _company_admin(session):
+        raise HTTPException(
+            status_code=403, detail="회사용은 회사 관리자만 고침 — 개인용으로 복사해서 씀."
+        )
+    folder = _folder(layer, who)
+    items_store.ensure(folder)
+    return folder
+
+
+def _call(folder: Path, fn, *args):
+    with store.at(folder):
+        try:
+            return fn(*args)
+        except store.StoreError as e:
+            raise HTTPException(status_code=e.status, detail=e.detail) from e
+
+
+# ── 항목 목록 · 복사 ───────────────────────────────────
+
+
+def _listing(session: Session, layer: str, owner: str | None) -> dict[str, Any]:
+    who = None if layer == "system" else _owner(session, layer, owner)
+    if layer != "system" and who is None:
+        return {"layer": layer, "owner": None, "items": []}  # 회사 없음 = 빈 그룹
+    folder = _root(session, layer, who)
+    return {"layer": layer, "owner": who, "items": items_store.items(folder)}
+
+
+@router.get("/items")
+def get_items(
+    layer: Layer = "system",
+    owner: str | None = None,
+    all: bool = False,  # noqa: A002 — 21-1 약속 이름 `?all=1`
+    session: Session = Depends(verify_session),
+):
+    """21-1 — 한 층이면 `[{key, 열, 종류, 분류1~3, 단위, 일위대가, 자재조합, 도번, 면적번,
+    재료번}]` ·
+    `?all=1` 이면 세 층 `[{layer, owner, items}]`(회사 · 개인은 세션 것 · 회사 없으면 빈 목록)."""
+    if all:
+        return [_listing(session, one, None) for one in ("system", "company", "personal")]
+    return _listing(session, layer, owner)["items"]
+
+
+@router.post("/layers/personal/items/copy")
+def copy_item(body: CopyItemBody, session: Session = Depends(verify_session)) -> dict:
+    """회사 · 마스터 항목 → 내 개인 층 새 항목(열 · 세 파일 · 자재 조합 줄 · 새 SS 키 · `본뜬`)."""
+    target = _root(session, "personal", None, write=True)
+    source = _root(session, body.from_layer, body.from_owner)
+    owner = (
+        None if body.from_layer == "system" else _owner(session, body.from_layer, body.from_owner)
+    )
+    origin = {"layer": body.from_layer, "owner": owner, "key": body.key}
+    try:
+        return items_store.copy_item(source, target, body.key, origin)
+    except store.StoreError as e:
+        raise HTTPException(status_code=e.status, detail=e.detail) from e
+
+
+# ── 층 길 — 옛 시스템 길과 같은 모양 ─────────────────────
+
+
+@router.get("/layers/{layer}/structures/numbers")
+def get_numbers(layer: Layer, owner: str | None = None, session: Session = Depends(verify_session)):
+    return _call(_root(session, layer, owner), store.structure_numbers)
+
+
+@router.get("/layers/{layer}/structure-combos")
+def get_combos(layer: Layer, owner: str | None = None, session: Session = Depends(verify_session)):
+    return _call(_root(session, layer, owner), store.read_combos)
+
+
+@router.post("/layers/{layer}/structures/{column}")
+def post_structure(
+    layer: Layer, column: str, owner: str | None = None, session: Session = Depends(verify_session)
+):
+    return _call(_root(session, layer, owner, write=True), store.create_structure, column)
+
+
+@router.post("/layers/{layer}/structures/{column}/combo")
+def post_combo(
+    layer: Layer,
+    column: str,
+    body: BranchBody,
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    """일위대가 조합 갈라 내기 — 새 UA 는 M01 시스템 마스터에 생기므로 SYSTEM_ADMIN 만."""
+    folder = _root(session, layer, owner, write=True)
+    if not _admin(session):
+        raise HTTPException(status_code=403, detail="일위대가 조합은 시스템 관리자만 새로 만듦.")
+    return _call(
+        folder, branch.branch_combo, column, body.본뜬키, body.담은로직, body.이름, body.판
+    )
+
+
+@router.post("/layers/{layer}/structures/{column}/material-combo")
+def post_material_combo_branch(
+    layer: Layer,
+    column: str,
+    body: MaterialBranchBody,
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    folder = _root(session, layer, owner, write=True)
+    args = (column, body.본뜬키, body.담은자재, body.이름, body.판)
+    return _call(folder, branch.branch_material_combo, *args)
+
+
+@router.post("/layers/{layer}/structures/{column}/use-combo")
+def post_use_combo(
+    layer: Layer,
+    column: str,
+    body: UseComboBody,
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    folder = _root(session, layer, owner, write=True)
+    return _call(folder, branch.use_combo, column, body.종류, body.키, body.판)
+
+
+@router.post("/layers/{layer}/{kind}/{column}/copy")
+def post_copy(
+    layer: Layer,
+    kind: Literal["structures", "area", "material"],
+    column: str,
+    source: str = Query(alias="from"),
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    folder = _root(session, layer, owner, write=True)
+    part = "structure" if kind == "structures" else kind
+    return _call(folder, store.copy_from, part, column, source)
+
+
+@router.get("/layers/{layer}/material-combos")
+def get_matsets(layer: Layer, owner: str | None = None, session: Session = Depends(verify_session)):
+    return _call(_root(session, layer, owner), matset.listing)
+
+
+@router.get("/layers/{layer}/material-combos/{key}")
+def get_matset(
+    layer: Layer, key: str, owner: str | None = None, session: Session = Depends(verify_session)
+):
+    return _call(_root(session, layer, owner), matset.one, key)
+
+
+@router.post("/layers/{layer}/material-combos")
+def post_matset(
+    layer: Layer,
+    body: MatsetBody,
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    return _call(_root(session, layer, owner, write=True), matset.create, body.줄, body.판)
+
+
+@router.put("/layers/{layer}/material-combos/{key}")
+def put_matset(
+    layer: Layer,
+    key: str,
+    body: MatsetBody,
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    return _call(_root(session, layer, owner, write=True), matset.edit, key, body.줄, body.판)
+
+
+@router.delete("/layers/{layer}/material-combos/{key}")
+def delete_matset(
+    layer: Layer,
+    key: str,
+    판: str = "",
+    owner: str | None = None,
+    session: Session = Depends(verify_session),
+):
+    return _call(_root(session, layer, owner, write=True), matset.delete, key, 판)
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Router_Layers.py b/M02_MasterTemplete/M02_MasterTemplete_Router_Layers.py
index ec54af44..5743a60b 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Router_Layers.py
+++ b/M02_MasterTemplete/M02_MasterTemplete_Router_Layers.py
@@ -1,7 +1,7 @@
 """M02 양식 층 API — 계약 `tmp/M02_분석/6_계약.md` 「층 (sub4)」.
 
 ⚠ 등록은 `main.py`(로그인만) · 층마다 권한은 여기서:
-    system    읽기만(고치기는 `/api/m02/templates` 시스템 관리자 길)
+    system    읽기 · 쓰기는 시스템 관리자(옛 `/api/m02/templates` 길과 같은 저장소)
     company   같은 회사 읽기 · 쓰기는 회사 관리자(ADMIN · 마스터 · 시스템 관리자)
     personal  본인 읽기·쓰기 · 같은 회사 사람 것은 읽기만(가져오기)
     project   같은 회사 프로젝트 · 작업본 쓰기 · `_initial/` 은 안 씀
@@ -26,6 +26,8 @@ from common_util import common_util_spreadsheet as spreadsheet
 from common_util.common_util_auth import verify_session
 from common_util.common_util_storage import resolve_stored_project_path
 from config.config_db import get_db_pool, run_with_connection
+from M02_MasterTemplete import M02_MasterTemplete_Items as items_store
+from M02_MasterTemplete import M02_MasterTemplete_Store as store
 from M02_MasterTemplete import M02_Table_Fill as fill
 from M02_MasterTemplete import M02_Template_Layers as layers
 
@@ -152,8 +154,8 @@ async def _project(session: dict[str, Any], project_id: str | None) -> dict[str,
 
 def _company_of(session: dict[str, Any], project: dict[str, Any] | None) -> int:
     company_id = project["company_id"] if project else session.get("company_id")
-    if company_id is None:
-        raise HTTPException(status_code=403, detail="회사 연결이 필요합니다.")
+    if company_id is None:  # 회사 없는 사용자는 없음(21-0) — 회사 · 개인 층은 회사부터
+        raise HTTPException(status_code=409, detail="회사부터 등록 — 회사 연결이 필요합니다.")
     return int(company_id)
 
 
@@ -174,8 +176,8 @@ async def _layer_dir(
 ) -> Path:
     """층 폴더 — 읽기·쓰기 권한까지 여기서 가름."""
     if layer == "system":
-        if write:
-            raise HTTPException(status_code=403, detail="시스템 양식은 마스터 템플릿 화면에서만.")
+        if write and not _is_system_admin(session):
+            raise HTTPException(status_code=403, detail="시스템 양식은 시스템 관리자만.")
         return layers.system_dir()
     if layer == "project":
         return layers.project_dir((await _project(session, project_id))["root"])
@@ -184,16 +186,22 @@ async def _layer_dir(
     if layer == "company":
         if write and not _is_company_admin(session):
             raise HTTPException(status_code=403, detail="회사 공식 양식은 회사 관리자만.")
-        return layers.company_dir(company_id)
+        return _ensured(layers.company_dir(company_id))
     if layer == "personal":
         owner = int(user_id) if user_id is not None else int(session["user_id"])
         if write and owner != session.get("user_id"):
             raise HTTPException(status_code=403, detail="개인 양식은 본인만 고칩니다.")
         await _same_company_user(session, owner, company_id)
-        return layers.personal_dir(company_id, owner)
+        return _ensured(layers.personal_dir(company_id, owner))
     raise HTTPException(status_code=404, detail="없는 층입니다.")
 
 
+def _ensured(folder: Path) -> Path:
+    """회사 · 개인 층 첫 진입 — 빈 구조물집계표 뼈대(PLAN 21-2 · `Items.ensure`)."""
+    items_store.ensure(folder)
+    return folder
+
+
 def _bad(error: ValueError) -> HTTPException:
     return HTTPException(status_code=400, detail=str(error))
 
@@ -261,6 +269,13 @@ async def save_layer_template(
     if kind == "table" and fill.is_fillable(document):
         # 채운 표가 와도 설계값은 안 받아 적음 — 양식 + 손 값만(5장 · 브라우저 값을 믿지 않음)
         document = fill.strip_design(document)
+    if layer != "project":
+        # 시스템 · 회사 · 개인 층 = 마스터 저장소 규칙 그대로(집계표 저장 때 새 열 파일 ·
+        # 번호 · SS 장부 ·
+        # 계산값 서버 풀이 · 번호 칸 보존 — `M02_MasterTemplete_Store.write`)
+        return await asyncio.to_thread(
+            _store_save, folder, kind, name, body.판 or "", document, layer
+        )
     if kind in ("area", "material"):
         # 면적산출 · 재료산출 계산값은 서버가 같은 TS 엔진을 Node 로 돌려 새로 적음
         # (브라우저 값 버림 · 5장 ②)
@@ -287,6 +302,15 @@ async def save_layer_template(
     return {"종류": kind, "이름": name, "판": version, "층": layer}
 
 
+def _store_save(folder: Path, kind: str, name: str, version: str, doc: Any, layer: str) -> dict:
+    with store.at(folder):
+        try:
+            info = store.write(kind, name, version, doc)
+        except store.StoreError as error:
+            raise HTTPException(status_code=error.status, detail=error.detail) from error
+    return {"종류": kind, "이름": name, "판": info["판"], "층": layer}
+
+
 @router.delete("/layers/{layer}/templates/{kind}/{name}")
 async def delete_layer_template(
     layer: Layer,
@@ -296,10 +320,15 @@ async def delete_layer_template(
     project_id: str | None = Query(None),
     session: dict[str, Any] = Depends(verify_session),
 ) -> dict[str, Any]:
-    """개인 = 본인만 · 회사 = 회사 관리자만 · 시스템 · 프로젝트 층은 거절 · 판이 다르면 409."""
-    if layer in ("system", "project"):
-        raise HTTPException(status_code=403, detail="개인 · 회사 층 양식만 지울 수 있습니다.")
+    """개인 = 본인만 · 회사 = 회사 관리자만 · 시스템 = 시스템 관리자 · 프로젝트 층은 거절 ·
+    판이 다르면 409 · 프로그램이 이름으로 부르는 양식(`store.IN_USE` — 구조물집계표 등)은 409."""
+    if layer == "project":
+        raise HTTPException(
+            status_code=403, detail="개인 · 회사 · 시스템 층 양식만 지울 수 있습니다."
+        )
     folder = await _layer_dir(session, layer, project_id=project_id, write=True)
+    if (kind, name) in store.IN_USE:
+        raise HTTPException(status_code=409, detail=f"쓰는 양식이라 못 지움 「{name}」")
     try:
         layers.check_kind(kind)
         layers.check_name(name)
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Store.py b/M02_MasterTemplete/M02_MasterTemplete_Store.py
index 306a8d72..f068b29a 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Store.py
+++ b/M02_MasterTemplete/M02_MasterTemplete_Store.py
@@ -1,4 +1,4 @@
-"""M02 마스터 템플릿 — 시스템 층 저장소 (`resources/master_template/{종류}/<이름>.json`).
+"""M02 마스터 템플릿 — 층 저장소 · 기본 시스템 층(`resources/master_template/{종류}/<이름>.json`).
 
 M01 `Store` 방식 — 판(파일 sha256 앞 16자) · 판이 다르면 409 · 원자 쓰기.
 권한은 등록하는 쪽(`main.py`)이 붙임.
@@ -10,6 +10,9 @@ import hashlib
 import json
 import re
 import threading
+from collections.abc import Iterator
+from contextlib import contextmanager
+from contextvars import ContextVar
 from datetime import datetime
 from pathlib import Path
 from typing import Any
@@ -20,6 +23,26 @@ from M02_MasterTemplete import M02_Template_Layers as layers
 
 FOLDER: Path = Path(__file__).resolve().parent.parent / "resources" / "master_template"
 KINDS = layers.KINDS  # 시험은 FOLDER 를 사본으로 바꿈
+# 지금 다루는 층 폴더 — 층 라우터가 `at(층 폴더)` 로 바꿈 · 안 바꾸면 시스템 층(`FOLDER`).
+# 회사 · 개인 층도 시스템과 같은 모양(`table/구조물집계표.json` · 조합 장부 ·
+# structure/area/material · 자재조합.json — PLAN 21-1)이라 아래 함수는 그대로 씀
+_ROOT: ContextVar[Path | None] = ContextVar("m02_layer_root", default=None)
+
+
+def root() -> Path:
+    return _ROOT.get() or FOLDER
+
+
+@contextmanager
+def at(folder: str | Path) -> Iterator[Path]:
+    """이 안에서 부르는 저장소 함수는 `folder` 층을 봄(요청 하나 · 스레드 하나 안에서만)."""
+    token = _ROOT.set(Path(folder))
+    try:
+        yield Path(folder)
+    finally:
+        _ROOT.reset(token)
+
+
 # 구조물집계표 구조물 열(꼴=수) 마다 세 파일(파일 이름 = 열 id) —
 #   구조물 도면 `structure/` (도각 없는 전용 화면) · 면적산출 `area/` · 재료산출 `material/`
 #   (둘 다 스프레드시트 통합문서)
@@ -75,7 +98,7 @@ def _path(kind: str, name: str) -> Path:
         or _BAD_NAME.search(name)
     ):
         raise StoreError(400, f"쓸 수 없는 글자가 있는 이름 「{name}」")
-    return FOLDER / kind / f"{name}.json"
+    return root() / kind / f"{name}.json"
 
 
 def _info(kind: str, path: Path) -> dict[str, Any]:
@@ -91,7 +114,7 @@ def list_all() -> list[dict[str, Any]]:
     rows = [
         _info(kind, p)
         for kind in KINDS
-        for p in sorted((FOLDER / kind).glob("*.json"))
+        for p in sorted((root() / kind).glob("*.json"))
         if not p.name.startswith(".")
     ]
     return rows
@@ -162,7 +185,7 @@ def delete(kind: str, name: str, version: str | None = None) -> None:
 
 
 def _docs(kind: str) -> list[tuple[str, Any]]:
-    folder = FOLDER / kind
+    folder = root() / kind
     return [(p.stem, json.loads(p.read_bytes())) for p in sorted(folder.glob("[!.]*.json"))]
 
 
@@ -260,7 +283,7 @@ def _new_code(column: str) -> str:
 
 def _retired() -> list[str]:
     """지운 열의 8자리 — 조합 장부 `지운번호`(한 번 준 번호는 다시 안 줌)."""
-    path = FOLDER / COMBO_FILE
+    path = root() / COMBO_FILE
     return json.loads(path.read_bytes()).get("지운번호", []) if path.is_file() else []
 
 
@@ -318,7 +341,7 @@ def _take_origins(doc: Any) -> dict[str, str]:
         source = col.pop("본뜬열", None)
         if not source or source not in by_id or not col.get("id"):
             continue
-        if (FOLDER / "structure" / f"{col['id']}.json").is_file():
+        if (root() / "structure" / f"{col['id']}.json").is_file():
             continue
         out[col["id"]] = source
         for field in ("일위대가", "자재조합"):
@@ -360,14 +383,14 @@ def prune_removed_structures() -> list[str]:
     codes: set[str] = set()
     with _LOCK:
         for kind, key, _, _ in PARTS:
-            for path in sorted((FOLDER / kind).glob("[!.]*.json")):
+            for path in sorted((root() / kind).glob("[!.]*.json")):
                 if path.stem not in keep:
                     code = _code(json.loads(path.read_bytes()), key)
                     codes.update([code] if code else [])
                     path.unlink()
                     gone.append(f"{kind}/{path.stem}")
         if codes:  # 지운 번호는 장부에 남겨 새 열이 다시 안 받게
-            book = FOLDER / COMBO_FILE
+            book = root() / COMBO_FILE
             doc = json.loads(book.read_bytes()) if book.is_file() else {}
             doc["지운번호"] = sorted(codes | set(doc.get("지운번호", [])))
             atomic_write_json(book, doc)
@@ -377,7 +400,7 @@ def prune_removed_structures() -> list[str]:
 def _move_basis() -> list[str]:
     """12장 산출근거 `basis/` → 면적산출 `area/` (내용 · 알약 연결 그대로 · 표번 칸 → 면적번 ·
     시트 이름 산출근거 → 면적산출) · 옮긴 뒤 빈 `basis/` 폴더를 지움."""
-    old = FOLDER / "basis"
+    old = root() / "basis"
     if not old.is_dir():
         return []
     moved: list[str] = []
@@ -478,7 +501,7 @@ def _combo_row(key: str, col: dict[str, Any], numbers: dict[str, str]) -> dict[s
 def sync_combos() -> dict[str, Any]:
     """조합 표를 집계표에 맞춤 — 새 열 = 새 SS 키 · 지운 열 = 줄 지움 · 고친 열 = 칸 갱신 ·
     줄 차례 = 집계표 열 차례. 바뀐 것이 없으면 파일을 안 씀."""
-    path = FOLDER / COMBO_FILE
+    path = root() / COMBO_FILE
     with _LOCK:
         old = json.loads(path.read_bytes()) if path.is_file() else {}
         keys = {row["열"]: row["키"] for row in old.get("줄", [])}
@@ -502,5 +525,5 @@ def sync_combos() -> dict[str, Any]:
 
 def read_combos() -> dict[str, Any]:
     """조합 표 — 파일이 아직 없으면 지금 열 전부로 처음 한 번 만듦."""
-    path = FOLDER / COMBO_FILE
+    path = root() / COMBO_FILE
     return json.loads(path.read_bytes()) if path.is_file() else sync_combos()
diff --git a/common_util/common_util_station.ts b/common_util/common_util_station.ts
new file mode 100644
index 00000000..3fb2d306
--- /dev/null
+++ b/common_util/common_util_station.ts
@@ -0,0 +1,25 @@
+/* =============================================================================
+ * common_util_station.ts
+ * 측점 화면 표기 한 벌 — B05 · B06 목록 · 폼 · 툴팁 · 종단 표시가 모두 이것을 씀
+ * (`common_util_svg` 가 다시 내보냄 · B05 는 `formatStation` 이름으로 가져다 씀). 가져오는 것이 없는
+ * 순수 함수라 서버 Node · 시험 헬퍼에서도 그대로 돎.
+ * ========================================================================== */
+
+/** 측점 라벨 — "STA" 접두사 없이 `측점번호+잔여거리`(예: `4+0` · `5+20`).
+ *  화면 표기만 거리를 정수로(119.8 → 5+20 · 2026-09-29 사용자 확정) — 입력 · 저장값은 소수 그대로. */
+export function stationLabel(chainage: number, interval: number): string {
+  const safeInterval = interval > 0 ? interval : 1;
+  let stationNumber = Math.floor((chainage + 1e-6) / safeInterval);
+  let remainder = chainage - stationNumber * safeInterval;
+  if (Math.abs(remainder) < 0.05) remainder = 0;
+  if (remainder >= safeInterval - 0.05) {
+    stationNumber += 1;
+    remainder = 0;
+  }
+  return stationPartsLabel(stationNumber, remainder);
+}
+
+/** 이미 나눈 측점번호 · 잔여거리의 표기 — 거리는 정수로 보이기만. */
+export function stationPartsLabel(stationNumber: number, remainder: number): string {
+  return `${stationNumber}+${Math.round(remainder)}`;
+}
diff --git a/common_util/common_util_svg.ts b/common_util/common_util_svg.ts
index d2498638..e03e9e6c 100644
--- a/common_util/common_util_svg.ts
+++ b/common_util/common_util_svg.ts
@@ -49,15 +49,4 @@ export function inferStationInterval(stations: Array<{ chainage_m: number }>): n
   );
 }
 
-/** 측점 라벨 — "STA" 접두사 없이 `측점번호+잔여거리`(예: `4+0.0`). */
-export function stationLabel(chainage: number, interval: number): string {
-  const safeInterval = interval > 0 ? interval : 1;
-  let stationNumber = Math.floor((chainage + 1e-6) / safeInterval);
-  let remainder = chainage - stationNumber * safeInterval;
-  if (Math.abs(remainder) < 0.05) remainder = 0;
-  if (remainder >= safeInterval - 0.05) {
-    stationNumber += 1;
-    remainder = 0;
-  }
-  return `${stationNumber}+${remainder.toFixed(1)}`;
-}
+export { stationLabel } from "./common_util_station";
diff --git a/main.py b/main.py
index 12d20e8c..2513076b 100644
--- a/main.py
+++ b/main.py
@@ -63,6 +63,7 @@ from B07_DesignDetail.B07_DesignDetail_Router_Frame import router as b07_frame_r
 from M01_MasterData.M01_MasterData_Router import router as m01_master_data_router
 from M02_MasterTemplete.M02_MasterTemplete_Router import router as m02_master_template_router
 from M02_MasterTemplete.M02_MasterTemplete_Router_Drawing import router as m02_drawing_router
+from M02_MasterTemplete.M02_MasterTemplete_Router_Items import router as m02_items_router
 from M02_MasterTemplete.M02_MasterTemplete_Router_Layers import router as m02_layers_router
 from common_util.common_util_audit import note_api_call, record_call_burst
 from common_util.common_util_auth import (
@@ -638,6 +639,7 @@ app.include_router(m01_master_data_router, dependencies=system_admin_only)
 # 마스터 템플릿 — 시스템 층은 시스템 관리자만 · 층(회사·개인·프로젝트)·도면 길은 로그인만(권한은 길 안에서).
 app.include_router(m02_master_template_router, dependencies=system_admin_only)
 app.include_router(m02_layers_router, dependencies=protected)
+app.include_router(m02_items_router, dependencies=protected)
 app.include_router(m02_drawing_router, dependencies=protected)
 # 개발 전용 잠금 해제 — 다른 라우터와 **같은 보호**를 받는다(로그인·회사·프로젝트 접근).
 # 그 위에 서버가 환경까지 한 번 더 본다.
diff --git a/resources/tester/helper_b05_station_roundtrip.cjs b/resources/tester/helper_b05_station_roundtrip.cjs
index c31ff5cd..a967df82 100644
--- a/resources/tester/helper_b05_station_roundtrip.cjs
+++ b/resources/tester/helper_b05_station_roundtrip.cjs
@@ -101,4 +101,16 @@ out.moved = store.edits();
 store.resetStation(200);
 out.deleted = store.edits();
 
+// 화면 표기 한 벌 — 거리는 정수로 보이기만(PLAN 20장 · 119.8 → 5+20)
+const { stationLabel, stationPartsLabel } = loadTs(
+  path.join(ROOT, "common_util", "common_util_station.ts"),
+);
+out.labels = [
+  stationLabel(119.8, INTERVAL),
+  stationLabel(120, INTERVAL),
+  stationLabel(84.3, INTERVAL),
+  stationLabel(123.37, INTERVAL),
+  stationPartsLabel(5, 19.8),
+];
+
 process.stdout.write(JSON.stringify(out));
diff --git a/resources/tester/test_b05_b06_save_roundtrip.py b/resources/tester/test_b05_b06_save_roundtrip.py
index a3b25de8..dbbcd235 100644
--- a/resources/tester/test_b05_b06_save_roundtrip.py
+++ b/resources/tester/test_b05_b06_save_roundtrip.py
@@ -22,6 +22,8 @@ from typing import Any
 
 import pytest
 
+from B05_Profile.B05_Profile_Engine_Sections import cross_filename
+
 ROOT = Path(__file__).resolve().parents[2]
 PROJECT_ID = "936be972-11bc-46c2-8bf3-b15d8de7df0d"  # OWNERS.md — laptop-sub `랩탑_보조`
 SOURCE = ROOT / "storage" / "1" / "3" / PROJECT_ID
@@ -425,6 +427,10 @@ class Flow:
             near = [s["chainage_m"] for s in lon["stations"] if abs(s["chainage_m"] - c) < 1.0]
             if not any(abs(n - c) < 0.005 for n in near):
                 d.append(f"관 측점 {c} — 종단 측점에 없음(가까운 측점 {near})")
+            # 소수 측점 횡단(PLAN 20장) — 그 자리 횡단 파일이 소수 2자리 이름으로 따로 있음
+            name = cross_filename(c)
+            if not (root / "B06_Section" / "cross_sections" / name).is_file():
+                d.append(f"관 측점 {c} — 횡단 파일 {name} 없음")
         self._check_designs()
 
     def _check_designs(self) -> None:
diff --git a/resources/tester/test_b05_extra_stations_supplier.py b/resources/tester/test_b05_extra_stations_supplier.py
index 689ea264..237ce6a7 100644
--- a/resources/tester/test_b05_extra_stations_supplier.py
+++ b/resources/tester/test_b05_extra_stations_supplier.py
@@ -192,7 +192,7 @@ def test_matching_signature_loads_points(tmp_path):
     ]
 
 
-# ── 횡단 파일명 충돌 — 한 정수 미터에 측점 하나 · 관 · 구조물 자체 측점 우선(PLAN 19장) ──
+# ── 소수 측점 횡단 — 관 · 구조물 자리마다 따로(이름 소수 2자리 · PLAN 20장) ──────────────
 
 
 def _stations(extra_stations):
@@ -204,31 +204,32 @@ def _stations(extra_stations):
     return result["longitudinal"]["stations"]
 
 
-def test_extra_station_in_grid_meter_replaces_grid_station():
+def test_extra_station_in_grid_meter_keeps_both_with_own_names():
     stations = _stations(((100.4, "X"),))
     chainages = [station["chainage_m"] for station in stations]
-    # 관 · 구조물 자체 측점 그대로 — 같은 정수 미터 격자 100 은 빠져 파일(cross_00100m)은 한 장
-    assert 100.4 in chainages and 100.0 not in chainages
+    assert 100.4 in chainages and 100.0 in chainages
     labelled = [station for station in stations if station.get("structure") == "X"]
     assert [(station["chainage_m"], station["kind"]) for station in labelled] == [
         (100.4, "irregular")
     ]
+    assert cross_filename(100.4) == "cross_00100.40m.json"
     assert len({cross_filename(c) for c in chainages}) == len(chainages)
 
 
-def test_extra_station_at_route_end_keeps_end_station():
-    stations = _stations(((0.3, "S"), (349.8, "E")))
-    chainages = [station["chainage_m"] for station in stations]
-    # 시 · 종점은 격자 그대로 두고 라벨만 얹음
-    assert chainages[0] == 0.0 and chainages[-1] == 350.0
-    assert 0.3 not in chainages and 349.8 not in chainages
-    assert stations[0].get("structure") == "S" and stations[-1].get("structure") == "E"
+def test_extra_station_on_grid_within_5mm_labels_grid_station():
+    stations = _stations(((100.003, "X"), (0.3, "S")))
+    labelled = {station["chainage_m"]: station for station in stations if station.get("structure")}
+    assert sorted(labelled) == [0.3, 100.0]
+    assert labelled[100.0]["kind"] == "regular" and labelled[0.3]["kind"] == "irregular"
 
 
-def test_two_extras_in_same_meter_bucket_keep_one():
+def test_two_extras_in_same_meter_both_kept():
     stations = _stations(((80.2, "A"), (80.4, "B")))
-    assert [station["chainage_m"] for station in stations if station.get("structure")] == [80.2]
-    assert 80.0 not in [station["chainage_m"] for station in stations]
+    assert [station["chainage_m"] for station in stations if station.get("structure")] == [
+        80.2,
+        80.4,
+    ]
+    assert 80.0 in [station["chainage_m"] for station in stations]
 
 
 def test_live_extras_stay_irregular_and_filenames_stay_unique():
@@ -287,7 +288,7 @@ def test_run_section_generation_derives_stations_from_truth_files(project):
     ]
 
     cross_dir = project / "B06_Section" / "cross_sections"
-    for name in ("cross_00084m", "cross_00150m", "cross_00201m", "cross_00276m"):
+    for name in ("cross_00084.30m", "cross_00149.73m", "cross_00200.92m", "cross_00275.71m"):
         assert (cross_dir / f"{name}.json").is_file()
     # 파일 = DB 행 — 종전에는 파일 23 vs DB 19로 갈렸다.
     assert len(result["cross_sections"]) == len(stations)
diff --git a/resources/tester/test_b05_station_roundtrip.py b/resources/tester/test_b05_station_roundtrip.py
index 68e956c5..22d11394 100644
--- a/resources/tester/test_b05_station_roundtrip.py
+++ b/resources/tester/test_b05_station_roundtrip.py
@@ -37,6 +37,10 @@ def test_칸을_안_고치면_실어_둔_측점_그대로(results):
     assert results["r119"] == ["5", "19.8", 119.8]
 
 
+def test_화면_표기는_거리를_정수로(results):
+    assert results["labels"] == ["5+20", "6+0", "4+4", "6+3", "5+20"]
+
+
 def test_칸을_고치면_친_값(results):
     assert results["edited"] == pytest.approx(125.2)
     assert results["normalized"] == ["2", "10.0", 50]
@@ -96,8 +100,31 @@ def test_사용자_구조물_119_8_저장_다시_읽기_그대로(tmp_path):
         SectionGenerationOptions(extra_stations=extras),
     )
     chainages = [round(s["chainage_m"], 3) for s in sections["longitudinal"]["stations"]]
-    # 횡단 측점도 자체 측점 119.8(같은 정수 미터 격자 120 대신 · 파일 이름 cross_00120m 한 장)
-    assert 119.8 in chainages and 120.0 not in chainages
-    assert cross_filename(119.8) == cross_filename(120.0)
+    # 소수 측점 횡단을 따로 둠(PLAN 20장) — 119.8 · 격자 120 둘 다 · 이름도 따로
+    assert 119.8 in chainages and 120.0 in chainages
+    assert (cross_filename(119.8), cross_filename(120.0)) == (
+        "cross_00119.80m.json",
+        "cross_00120m.json",
+    )
     _, again = load_structures(str(tmp_path))
     assert [s.chainage_m for s in again] == [119.8] and again[0].memo == "메모만"
+
+
+def test_옛_프로젝트_정수_이름_횡단은_찾고_안_지움(tmp_path):
+    """소수 측점이 정수 m 이름으로 저장된 옛 프로젝트 — 열 때 지우지 않고 그 파일을 씀."""
+    from B05_Profile.B05_Profile_Engine_Sections import find_cross_file, prune_stale_cross_files
+
+    (tmp_path / "cross_00084m.json").write_text("{}", encoding="utf-8")  # 옛 84.3
+    (tmp_path / "cross_00100m.json").write_text("{}", encoding="utf-8")
+    (tmp_path / "cross_00119.80m.json").write_text("{}", encoding="utf-8")  # 새 이름
+    (tmp_path / "cross_00500m.json").write_text("{}", encoding="utf-8")  # 잔재
+    stations = [{"chainage_m": 84.3}, {"chainage_m": 100.0}, {"chainage_m": 119.8}]
+    valid = prune_stale_cross_files(tmp_path, stations)
+    assert sorted(p.name for p in tmp_path.iterdir()) == [
+        "cross_00084m.json",
+        "cross_00100m.json",
+        "cross_00119.80m.json",
+    ]
+    assert valid == {"cross_00084m.json", "cross_00100m.json", "cross_00119.80m.json"}
+    assert find_cross_file(tmp_path, 84.3).name == "cross_00084m.json"
+    assert find_cross_file(tmp_path, 119.8).name == "cross_00119.80m.json"
diff --git a/resources/tester/test_b06_patch_station.py b/resources/tester/test_b06_patch_station.py
index 58481163..9abb3e39 100644
--- a/resources/tester/test_b06_patch_station.py
+++ b/resources/tester/test_b06_patch_station.py
@@ -34,3 +34,9 @@ def test_행_없는_측점_수정이면_측점을_세움(monkeypatch):
 def test_모든_수정에_행이_있으면_안_부름(monkeypatch):
     assert _calls(monkeypatch, [120.0, 140.004], [120.0, 140.0]) == []
     assert _calls(monkeypatch, [], [120.0]) == []
+
+
+def test_소수_측점_수정은_정수_격자_행으로_갈음하지_않음(monkeypatch):
+    # 119.8 은 격자 120 과 다른 측점(횡단 cross_00119.80m · PLAN 20장) — 제 행이 없으면 세움
+    assert _calls(monkeypatch, [119.8], [120.0]) == [PROJECT]
+    assert _calls(monkeypatch, [119.8], [119.8, 120.0]) == []
diff --git a/resources/tester/test_m02_layers_store.py b/resources/tester/test_m02_layers_store.py
new file mode 100644
index 00000000..715ed51f
--- /dev/null
+++ b/resources/tester/test_m02_layers_store.py
@@ -0,0 +1,172 @@
+"""M02 층 집계표(PLAN 21-2) — 층별 읽기 · 쓰기 · 권한 · 첫 진입 뼈대 · 항목 목록 · 항목 복사 ·
+시스템 회귀.
+
+임시 storage(회사 · 개인 층) + 견본 시스템 집계표(`write_sample_table`)로만 봄 —
+실제 양식은 안 읽음(시스템 층 두 자리 `store.FOLDER` · `layers.SYSTEM_ROOT` 모두 사본).
+자재 코드는 실제 M01 마스터에 있는 MT 키를 씀(자재 조합 저장이 마스터 대조를 함).
+"""
+
+from __future__ import annotations
+
+import json
+from pathlib import Path
+from typing import Any
+
+import pytest
+from fastapi import FastAPI
+from fastapi.testclient import TestClient
+
+from common_util.common_util_auth import verify_session
+from config import config_system
+from M01_MasterData import M01_MasterData_Store as m01
+from M02_MasterTemplete import M02_MasterTemplete_Router_Items as items_router
+from M02_MasterTemplete import M02_MasterTemplete_Router_Layers as layers_router
+from M02_MasterTemplete import M02_MasterTemplete_Store as store
+from M02_MasterTemplete import M02_Template_Layers as layers
+from resources.tester.test_m02_structure import write_sample_table
+
+TABLE = "table/구조물집계표"
+
+
+def _material() -> dict[str, Any]:
+    for data in m01.loaded()[0].values():
+        for row in data.get("줄") or []:
+            if str(row.get("키", "")).startswith("MT"):
+                return {"코드": row["키"], "이름": row.get("이름"), "규격": None, "단위": None}
+    raise AssertionError("마스터에 자재 키가 없음")
+
+
+@pytest.fixture()
+def world(tmp_path: Path, monkeypatch: pytest.MonkeyPatch) -> dict[str, Any]:
+    system = tmp_path / "system"
+    system.mkdir()
+    write_sample_table(system)
+    monkeypatch.setattr(store, "FOLDER", system)
+    monkeypatch.setattr(layers, "SYSTEM_ROOT", system)
+    store.renumber()
+    storage = tmp_path / "storage"
+    storage.mkdir()
+    monkeypatch.setattr(config_system, "STORAGE_BASE_DIR", str(storage))
+    session: dict[str, Any] = {"user_id": 42, "company_id": 7, "role": "USER", "is_master": False}
+    app = FastAPI()
+    app.include_router(layers_router.router)
+    app.include_router(items_router.router)
+    app.dependency_overrides[verify_session] = lambda: session
+    return {"client": TestClient(app), "session": session, "storage": storage, "system": system}
+
+
+def _as(world: dict, role: str = "USER", user: int = 42, company: int | None = 7) -> TestClient:
+    world["session"].update(role=role, user_id=user, company_id=company)
+    return world["client"]
+
+
+def _add_column(client: TestClient, layer: str, col: dict[str, Any]) -> None:
+    url = f"/api/m02/layers/{layer}/templates/{TABLE}"
+    got = client.get(url).json()
+    got["문서"]["열"].append(col)
+    put = client.put(url, json={"판": got["판"], "문서": got["문서"]})
+    assert put.status_code == 200, put.text
+
+
+COL = {"id": "cw", "머리": ["돌기슭막이", "찰쌓기", "회사형", None], "단위": "m", "꼴": "수"}
+
+
+def test_시스템_층은_그대로_항목_목록은_SS_줄(world):
+    client = _as(world)
+    rows = client.get("/api/m02/items").json()
+    ss = store.read_combos()["줄"]
+    assert [r["key"] for r in rows] == [r["키"] for r in ss] and rows[0]["key"] == "SS000001"
+    assert set(rows[0]) == {"key", *items_router.items_store.ITEM_FIELDS}
+    assert client.get("/api/m02/layers/system/structure-combos").json() == store.read_combos()
+    # 시스템 층 쓰기는 SYSTEM_ADMIN 만
+    assert client.post("/api/m02/layers/system/structures/rv").status_code == 403
+    url = f"/api/m02/layers/system/templates/{TABLE}"
+    got = client.get(url).json()
+    assert client.put(url, json={"판": got["판"], "문서": got["문서"]}).status_code == 403
+    assert client.delete(f"{url}?판={got['판']}").status_code == 403
+    admin = _as(world, "SYSTEM_ADMIN")
+    assert admin.put(url, json={"판": got["판"], "문서": got["문서"]}).status_code == 200
+    assert admin.delete(f"{url}?판={got['판']}").status_code == 409  # 쓰는 양식
+
+
+def test_회사_층_첫_진입_뼈대와_쓰기_권한(world):
+    client = _as(world)
+    assert client.get("/api/m02/items?layer=company").json() == []
+    root = world["storage"] / "7" / "templates"
+    table = json.loads((root / "table/구조물집계표.json").read_text("utf-8"))
+    assert (
+        table["열"] == []
+        and table["층"]
+        == json.loads((world["system"] / "table/구조물집계표.json").read_text("utf-8"))["층"]
+    )
+    assert json.loads((root / "구조물집계표조합.json").read_text("utf-8"))["다음"] == 1
+    assert json.loads((root / "자재조합.json").read_text("utf-8"))["다음"] == 1
+    url = f"/api/m02/layers/company/templates/{TABLE}"
+    got = client.get(url).json()
+    got["문서"]["열"].append(COL)
+    assert client.put(url, json={"판": got["판"], "문서": got["문서"]}).status_code == 403
+    _add_column(_as(world, "ADMIN"), "company", COL)
+    items = _as(world).get("/api/m02/items?layer=company").json()  # 같은 회사 일반 사용자
+    assert [(r["key"], r["열"]) for r in items] == [("SS000001", "cw")]
+    assert items[0]["도번"].startswith("SD") and (root / "structure/cw.json").is_file()
+    assert client.get("/api/m02/items?layer=company&owner=9").status_code == 403  # 남의 회사
+    # 일위대가(UA) 갈라 내기는 M01 시스템 마스터에 쓰므로 회사 관리자도 못 함
+    body = {"본뜬키": "UA000001", "담은로직": [], "이름": "x"}
+    admin = _as(world, "ADMIN")
+    assert admin.post("/api/m02/layers/company/structures/cw/combo", json=body).status_code == 403
+    assert admin.delete(f"{url}?판={client.get(url).json()['판']}").status_code == 409  # 쓰는 양식
+
+
+def test_개인_층은_본인만_회사_없으면_409(world):
+    client = _as(world)
+    _add_column(client, "personal", {**COL, "id": "p1"})
+    assert [r["열"] for r in client.get("/api/m02/items?layer=personal").json()] == ["p1"]
+    assert (world["storage"] / "7" / "42" / "templates" / "area" / "p1.json").is_file()
+    other = client.get("/api/m02/items?layer=personal&owner=7/43")
+    assert other.status_code == 403
+    lonely = _as(world, company=None)
+    groups = lonely.get("/api/m02/items?all=1").json()
+    assert [(g["layer"], g["items"]) for g in groups][1:] == [("company", []), ("personal", [])]
+    assert len(groups[0]["items"]) == len(store.read_combos()["줄"])  # 마스터는 보임
+    made = lonely.post(
+        "/api/m02/layers/personal/material-combos", json={"줄": {"이름": "a", "담은자재": []}}
+    )
+    assert made.status_code == 409 and "회사부터" in made.json()["detail"]
+
+
+def test_회사_항목을_개인으로_복사(world):
+    admin = _as(world, "ADMIN")
+    _add_column(admin, "company", COL)
+    base = "/api/m02/layers/company"
+    drawing = admin.get(f"{base}/templates/structure/cw").json()
+    doc = {**drawing["문서"], "도면": {**drawing["문서"]["도면"], "entities": [{"type": "line"}]}}
+    admin.put(f"{base}/templates/structure/cw", json={"판": drawing["판"], "문서": doc})
+    판 = admin.get(f"{base}/material-combos").json()["판"]
+    row = {"이름": "회사 자재", "담은자재": [_material()]}
+    um = admin.post(f"{base}/material-combos", json={"판": 판, "줄": row}).json()["키"]
+    admin.post(f"{base}/structures/cw/use-combo", json={"종류": "자재조합", "키": um})
+    ss = admin.get("/api/m02/items?layer=company").json()[0]["key"]
+
+    user = _as(world)
+    body = {"from_layer": "company", "from_owner": "7", "key": ss}
+    got = user.post("/api/m02/layers/personal/items/copy", json=body)
+    assert got.status_code == 200, got.text
+    made = got.json()
+    assert made["열"] == "cw" and made["key"] == "SS000001"
+    mine = "/api/m02/layers/personal"
+    copy = user.get(f"{mine}/templates/structure/cw").json()["문서"]
+    assert copy["도면"]["entities"] == [{"type": "line"}] and copy["열"] == "cw"
+    col = next(c for c in user.get(f"{mine}/templates/{TABLE}").json()["문서"]["열"])
+    assert col["본뜬"] == {"layer": "company", "owner": "7", "key": ss}
+    mat = user.get(f"{mine}/material-combos/{col['자재조합']}").json()
+    assert mat["이름"] == "회사 자재" and mat["담은자재"][0]["코드"] == _material()["코드"]
+    # 또 복사하면 새 열 id · 새 SS 키 · 자재 조합 이름 (2)
+    again = user.post("/api/m02/layers/personal/items/copy", json=body).json()
+    assert (again["열"], again["key"]) == ("cw_2", "SS000002")
+    names = [r["이름"] for r in user.get(f"{mine}/material-combos").json()["줄"]]
+    assert names == ["회사 자재", "회사 자재 (2)"]
+    # 마스터 항목도 개인으로 · 없는 키 404
+    master = {"from_layer": "system", "key": "SS000001"}
+    assert user.post("/api/m02/layers/personal/items/copy", json=master).status_code == 200
+    missing = {**body, "key": "SS999999"}
+    assert user.post("/api/m02/layers/personal/items/copy", json=missing).status_code == 404
diff --git a/resources/tester/test_m02_template_layers.py b/resources/tester/test_m02_template_layers.py
index e533ac28..76b2b013 100644
--- a/resources/tester/test_m02_template_layers.py
+++ b/resources/tester/test_m02_template_layers.py
@@ -143,12 +143,13 @@ def test_개인_양식은_본인만_쓰고_같은_회사는_읽어_가져옴(wor
     session.update(user_id=43)
     theirs = mine + "&user_id=42"
     assert client.get(theirs).status_code == 200
+    # 첫 진입 때 구조물집계표 빈 뼈대가 서므로(PLAN 21-2) 새 이름으로 씀
     put = client.put(
-        f"/api/m02/layers/personal/templates/table/구조물집계표?project_id={P1}&user_id=42",
+        f"/api/m02/layers/personal/templates/table/내표?project_id={P1}&user_id=42",
         json={"판": None, "문서": {"열": []}},
     )
     assert put.status_code == 200  # user_id 는 쓰기에서 무시 — 본인(43) 자리에 새로 씀
-    assert (world["storage"] / "7/43/templates/table/구조물집계표.json").is_file()
+    assert (world["storage"] / "7/43/templates/table/내표.json").is_file()
     got = client.post(
         f"/api/m02/projects/{P2}/templates/apply", json={"from": "personal", "user_id": 42}
     )