diff --git a/B06_Section/B06_Section_Api_Types.ts b/B06_Section/B06_Section_Api_Types.ts index d86d89bd..6a0d99b6 100644 --- a/B06_Section/B06_Section_Api_Types.ts +++ b/B06_Section/B06_Section_Api_Types.ts @@ -45,14 +45,7 @@ export interface StandardCrossGroup { /** 표준 횡단면 설정 패널 그룹 키. */ export type StandardCrossKey = "soil" | "rock" | "paved"; -export type StandardCrossSection = Record & { - /** 절토 법정 기울기 판정에 쓸 별표2 줄 — 지반유형(리핑암·발파암) → `soft_rock`/`hard_rock`. - * - * 별표2 는 암을 **경암·연암**으로 가르고 프로그램은 **리핑암·발파암**으로 가르는데 둘을 잇는 - * 문장이 법령·교본에 없다. 그래서 법정 근거가 아니라 **사용자가 고르는 설정**으로 두고 - * 표준단면 설정과 함께 저장한다(2026-09-07 사용자 확정). 없으면 기본값을 쓴다. */ - cut_slope_class?: Record; -}; +export type StandardCrossSection = Record; // 지반유형·토량환산계수·운반장비 한계거리는 B05 계획 유토곡선과 공유하므로 정의처를 // `@util/common_util_mass_haul_types` 한 곳에 두고 여기서는 재수출만 한다(사본 금지). @@ -84,13 +77,6 @@ export interface SectionContextResponse { /** 이 프로젝트에 **저장된** 표준 횡단면(사용자가 고쳐 확정한 값). 없으면 null. * 위 `standard_cross_section` 은 config 기본값이라 둘은 다른 것이다(2026-09-07). */ stored_standard_cross_section?: StandardCrossSection | null; - /** 절토 비탈 법정 기울기 범위(별표2) — `hard_rock`·`soft_rock`·`soil` → [최소, 최대]. - * 상수를 화면에 복제하지 않으려고 **서버가 준 값을 그대로** 쓴다(2026-09-07). */ - cut_slope_limits?: Record; - /** 지반유형(리핑암·발파암) → 별표2 줄. **사용자가 바꿀 수 있는 설정값**의 기본값이다. */ - cut_slope_class_default?: Record; - /** 절토 기울기 규정이 없는 등급(작업임도). */ - cut_slope_exempt_grades?: string[]; /** 암 경계선 기본 오프셋(m)과 상/하 제어 스텝(m). */ rock_boundary_default_offset_m: number; rock_boundary_step_m: number; diff --git a/B06_Section/B06_Section_Cut_Slope_Check.ts b/B06_Section/B06_Section_Cut_Slope_Check.ts deleted file mode 100644 index ba64fa88..00000000 --- a/B06_Section/B06_Section_Cut_Slope_Check.ts +++ /dev/null @@ -1,137 +0,0 @@ -/* ============================================================================= - * B06_Section_Cut_Slope_Check.ts - * 절토 비탈 **법정 기울기 검사**(별표2) — 순수 판정만 둔다(그리기는 카드 몫). - * - * 왜 필요한가 — 평면 곡선반경도, 성토사면 길이(5m·기슭막이 의무)도 위반 표시가 있는데 - * **절토 경사만 검사가 없었다**(2026-09-07). 절토 경사비는 표준 횡단면 설정에서 오는 - * 입력값일 뿐이라 별표2 범위를 벗어나도 아무 표시가 없었다. - * - * ⚠ **실효 경사로 보면 안 된다.** 소단이 서면 사면 전체를 하나로 잰 경사가 완만해져 - * **위반이 사라진 것처럼** 보인다(실측: 폭 1.0·간격 2 이면 설계 1:1 이 실효 1:1.71). - * 그래서 `design.cut_slope_segments`(소단을 뺀 **구간별** 경사)를 읽는다. - * - * 기준값·매핑은 **서버가 준 값**을 쓴다(config 상수를 화면에 복제하지 않는다). - * ========================================================================== */ - -import type { CrossSection, SectionContextResponse } from "./B06_Section_Api_Fetch"; - -/** 별표2 한 줄 — 수직 1 에 대한 수평(1:n 의 n) 범위. */ -export interface CutSlopeLimit { - min: number; - max: number; -} - -export interface CutSlopeCriteria { - /** 별표2 범위표 — `hard_rock`·`soft_rock`·`soil`. */ - limits: Record; - /** 지반유형(리핑암·발파암) → 별표2 줄. 사용자가 바꿀 수 있는 **설정값**이다. */ - classOf: Record; - /** 절토 기울기 규정이 없는 등급(작업임도). */ - exemptGrades: ReadonlyArray; -} - -export interface CutSlopeViolation { - side: string; - ratio: number; - /** 어느 별표2 줄로 판정했나 — 툴팁에 적는다. */ - limitKey: string; - limit: CutSlopeLimit; - /** 급한 쪽 위반인지(`steep`) 완만한 쪽 위반인지(`gentle`). */ - kind: "steep" | "gentle"; - startOffsetM: number; - endOffsetM: number; -} - -/** 서버 컨텍스트에서 기준을 꺼낸다. 값이 안 왔으면 null — 검사를 하지 않는다. */ -export function criteriaFrom(context: SectionContextResponse | null): CutSlopeCriteria | null { - const limits = context?.cut_slope_limits; - if (!limits || !Object.keys(limits).length) return null; - const table: Record = {}; - for (const [key, pair] of Object.entries(limits)) { - if (Array.isArray(pair) && pair.length >= 2) table[key] = { min: pair[0], max: pair[1] }; - } - return { - limits: table, - classOf: context?.cut_slope_class_default ?? {}, - exemptGrades: context?.cut_slope_exempt_grades ?? [], - }; -} - -/** - * 이 측점의 절토 구간이 별표2 범위를 벗어났는지. - * - * · 등급이 면제(작업임도)면 빈 목록. - * · 구간이 없으면(성토 측점 등) 빈 목록. - * · 암 구간은 측점의 `cut_rock_kind` 로 별표2 줄을 고른다 — 구간에는 `rock`/`soil` 만 있다. - */ -export function cutSlopeViolations( - section: CrossSection, - criteria: CutSlopeCriteria | null, - gradeClass: string | null, -): CutSlopeViolation[] { - if (!criteria) return []; - if (gradeClass && criteria.exemptGrades.includes(gradeClass)) return []; - const design = section.design as - { cut_slope_segments?: unknown; cut_rock_kind?: string | null } | undefined; - const segments = design?.cut_slope_segments; - if (!Array.isArray(segments) || !segments.length) return []; - - const rockKey = criteria.classOf[design?.cut_rock_kind ?? ""] ?? "hard_rock"; - const out: CutSlopeViolation[] = []; - for (const raw of segments) { - const segment = raw as { - side?: string; - ratio?: number; - material?: string | null; - start_offset_m?: number; - end_offset_m?: number; - }; - const ratio = segment.ratio; - if (typeof ratio !== "number" || !Number.isFinite(ratio)) continue; - const limitKey = segment.material === "rock" ? rockKey : "soil"; - const limit = criteria.limits[limitKey]; - if (!limit) continue; - // 경계값은 통과 — 1:0.8 은 「0.3~0.8」 안이다. - if (ratio >= limit.min - 1e-9 && ratio <= limit.max + 1e-9) continue; - out.push({ - side: segment.side ?? "", - ratio, - limitKey, - limit, - kind: ratio < limit.min ? "steep" : "gentle", - startOffsetM: segment.start_offset_m ?? 0, - endOffsetM: segment.end_offset_m ?? 0, - }); - } - return out; -} - -/** 별표2 줄 이름 — 화면·툴팁에 적는 말. */ -export function limitLabel(key: string): string { - if (key === "hard_rock") return "경암"; - if (key === "soft_rock") return "연암"; - return "토사"; -} - -/* ── 기억해 둔 기준 ────────────────────────────────────────────────────────── - * 카드는 그리는 자리마다 컨텍스트를 들고 있지 않다. 표준단면 기본값을 기억해 두는 것과 - * 같은 방식으로(`rememberStandardDefaults`) 여기 한 번 담아 두고 카드가 읽는다. - * ------------------------------------------------------------------------ */ -let remembered: CutSlopeCriteria | null = null; -let rememberedGrade: string | null = null; - -export function rememberCutSlopeCriteria(context: SectionContextResponse | null): void { - remembered = criteriaFrom(context); - rememberedGrade = context?.road_type ?? null; -} - -/** 사용자가 고른 매핑(리핑암·발파암 → 별표2 줄)을 얹는다. 없으면 기본값 그대로. */ -export function applyCutSlopeClassChoice(choice: Record | null | undefined): void { - if (!remembered || !choice) return; - remembered = { ...remembered, classOf: { ...remembered.classOf, ...choice } }; -} - -/** 지금 측점의 위반 목록 — 기준이 없거나 면제 등급이면 빈 목록. */ -export function violationsOf(section: CrossSection): CutSlopeViolation[] { - return cutSlopeViolations(section, remembered, rememberedGrade); -} diff --git a/B06_Section/B06_Section_Router.py b/B06_Section/B06_Section_Router.py index 60fb3384..006ad692 100644 --- a/B06_Section/B06_Section_Router.py +++ b/B06_Section/B06_Section_Router.py @@ -80,9 +80,6 @@ from config.config_db import get_db_pool, run_with_connection from config.config_system import ( EARTHWORK_CONVERSION_FACTORS, EARTHWORK_HAUL_EQUIPMENT_LIMITS_M, - FOREST_ROAD_CUT_SLOPE_CLASS_DEFAULT, - FOREST_ROAD_CUT_SLOPE_EXEMPT_GRADES, - FOREST_ROAD_CUT_SLOPE_LIMITS, FOREST_ROAD_MIN_WIDTH_M, NATURAL_SPOIL_MIN_GROUND_SLOPE, SECTION_VERTICAL_EXAGGERATION, @@ -144,11 +141,6 @@ async def get_section_context(project_id: UUID) -> SectionContextResponse | JSON ), standard_cross_section=STANDARD_CROSS_SECTION, stored_standard_cross_section=stored_standard, - cut_slope_limits={ - key: list(value) for key, value in FOREST_ROAD_CUT_SLOPE_LIMITS.items() - }, - cut_slope_class_default=dict(FOREST_ROAD_CUT_SLOPE_CLASS_DEFAULT), - cut_slope_exempt_grades=list(FOREST_ROAD_CUT_SLOPE_EXEMPT_GRADES), rock_boundary_default_offset_m=STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M, rock_boundary_step_m=STANDARD_ROCK_BOUNDARY_STEP_M, earthwork_conversion=EARTHWORK_CONVERSION_FACTORS, diff --git a/B06_Section/B06_Section_Schema.py b/B06_Section/B06_Section_Schema.py index c319150e..9b8dac61 100644 --- a/B06_Section/B06_Section_Schema.py +++ b/B06_Section/B06_Section_Schema.py @@ -243,11 +243,6 @@ class SectionContextResponse(BaseModel): # **화면은 config 기본값으로, 서버는 저장분으로** 계산해 같은 측점이 갈렸다. # 기존 `standard_cross_section`(기본값)은 그대로 두고 **한 칸만 더한다**. stored_standard_cross_section: dict[str, Any] | None = None - # 절토 비탈 법정 기울기 범위(별표2)와 지반유형 → 별표2 줄 기본 매핑, 검사 제외 등급. - # 브라우저가 상수를 복제하지 않게 **서버가 준 값을 그대로 기억**한다(표준단면과 같은 방식). - cut_slope_limits: dict[str, list[float]] = Field(default_factory=dict) - cut_slope_class_default: dict[str, str] = Field(default_factory=dict) - cut_slope_exempt_grades: list[str] = Field(default_factory=list) # 암 경계선 기본 오프셋(m)과 상/하 제어 스텝(m). rock_boundary_default_offset_m: float = -0.5 rock_boundary_step_m: float = 0.1 diff --git a/B06_Section/B06_Section_UI_Cross_Card_Chrome.ts b/B06_Section/B06_Section_UI_Cross_Card_Chrome.ts index f716468a..d7cd8c5c 100644 --- a/B06_Section/B06_Section_UI_Cross_Card_Chrome.ts +++ b/B06_Section/B06_Section_UI_Cross_Card_Chrome.ts @@ -13,7 +13,6 @@ import { buildRockBoundaryControl, sectionModeLabel, } from "./B06_Section_UI_Cross_Design"; -import { limitLabel, violationsOf } from "./B06_Section_Cut_Slope_Check"; import { type FillSlopeLength, fillSlopeLengths } from "./B06_Section_UI_Cross_Fit"; import { type DesignChangeHandler, @@ -86,26 +85,6 @@ export function appendCardHeader( openSlope.title = L("B06_Cross_SlopeUnclosed_Tip"); meta.append(openSlope); } - // 절토 비탈 법정 기울기(별표2) 위반 — 성토사면·미폐합 경고와 같은 자리·같은 모양이다. - // 소단이 서면 실효 경사가 완만해져 위반이 사라진 것처럼 보이므로, 판정은 **구간별** - // 경사(`cut_slope_segments`)로 한다(2026-09-07). - const cutViolations = violationsOf(section); - if (cutViolations.length) { - const worst = cutViolations[0]; - const badge = document.createElement("span"); - badge.className = "b06-cross-card__warning"; - badge.textContent = `⚠ 절토 1:${worst.ratio.toFixed(2)}`; - badge.title = cutViolations - .map( - (item) => - `${item.side === "left" ? "좌" : "우"} 1:${item.ratio.toFixed(2)}` + - ` — ${limitLabel(item.limitKey)} 법정 1:${item.limit.min}~${item.limit.max}` + - ` 범위 밖(${item.kind === "steep" ? "너무 급함" : "너무 완만함"})` + - ` · ${item.startOffsetM.toFixed(2)}~${item.endOffsetM.toFixed(2)}m`, - ) - .join("\n"); - meta.append(badge); - } const structureName = section.structure; if (structureName) { const structure = document.createElement("span"); diff --git a/B06_Section/B06_Section_UI_Page.ts b/B06_Section/B06_Section_UI_Page.ts index 43675dbd..69776846 100644 --- a/B06_Section/B06_Section_UI_Page.ts +++ b/B06_Section/B06_Section_UI_Page.ts @@ -2,7 +2,6 @@ import { writeCrossDesignChoice } from "./B06_Section_Cross_Design_Session"; import { CURRENT_PROJECT_ID_KEY, ROUTES } from "@config/config_frontend"; import { leaveForDashboard } from "../A00_Common/b_missing_data_guard"; import { readByKey, stateKey, writeByKey } from "../A00_Common/b_page_state"; -import { rememberCutSlopeCriteria } from "./B06_Section_Cut_Slope_Check"; import { navigateTo } from "../A00_Common/router"; import { createButton, createInputField, showToast } from "@ui/ui_template_elements"; import type { StructureInstance, StructureType } from "../B05_Profile/B05_Profile_Api_Structures"; @@ -668,8 +667,6 @@ export async function renderB06ProfileCross(root: HTMLElement): Promise { standardPanel = createStandardPanel(projectId, context.standard_cross_section, applyPanelToAll); // 브라우저 횡단 계산이 옛 암 측점을 서버와 같은 기본값으로 다시 계산하게 기억해 둔다. rememberRockBoundaryDefault(projectId, context.rock_boundary_default_offset_m); - // 절토 비탈 법정 기울기 기준(별표2)도 같은 방식으로 기억해 둔다 — 카드가 읽는다. - rememberCutSlopeCriteria(context); standardPanelSlot.append(standardPanel.root); if (context.route_id === null) { diff --git a/B06_Section/B06_Section_UI_Standard_Panel.ts b/B06_Section/B06_Section_UI_Standard_Panel.ts index dc670c3d..9279ab3b 100644 --- a/B06_Section/B06_Section_UI_Standard_Panel.ts +++ b/B06_Section/B06_Section_UI_Standard_Panel.ts @@ -26,7 +26,6 @@ import { } from "../A00_Common/b_page_state"; import { currentLanguageIndex, ui_locales } from "@ui/ui_template_locale"; import { createButton, createInputField, createSelectField } from "@ui/ui_template_elements"; -import { applyCutSlopeClassChoice } from "./B06_Section_Cut_Slope_Check"; import { buildStandardDiagram } from "./B06_Section_UI_Standard_Diagram"; import { getCompanyStandard, @@ -397,46 +396,8 @@ export function createStandardPanel( } actions.append(resetButton); - // ── 절토 법정 기울기 판정 기준 (2026-09-07 사용자 확정) ────────────────── - // 별표2 는 암을 **경암·연암**으로 가르고 프로그램은 **리핑암·발파암**으로 가른다. 둘을 - // 잇는 문장이 법령·교본에 없어 **프로그램 설정**으로 두고 여기서 고르게 한다. 기본값은 - // 리핑암 → 연암 · 발파암 → 경암(자연스러운 읽기). 절토 경사비가 오는 자리 옆이라 여기 둔다. - const cutClassWrap = document.createElement("div"); - cutClassWrap.className = "b06-std__cutclass"; - const cutClassTitle = document.createElement("p"); - cutClassTitle.className = "b06-std__cutclass-title"; - cutClassTitle.textContent = "절토 법정 기울기 판정 기준 (별표2)"; - cutClassTitle.title = - "별표2: 경암 1:0.3~0.8 · 연암 1:0.5~1.2 · 토사 1:0.8~1.5. 작업임도는 규정 없음."; - cutClassWrap.append(cutClassTitle); - const CUT_CLASS_OPTIONS = [ - { value: "soft_rock", text: "연암 (1:0.5~1.2)" }, - { value: "hard_rock", text: "경암 (1:0.3~0.8)" }, - ]; - for (const [kind, label] of [ - ["ripping_rock", "리핑암"], - ["blasting_rock", "발파암"], - ] as const) { - const current = - state.cut_slope_class?.[kind] ?? (kind === "ripping_rock" ? "soft_rock" : "hard_rock"); - const field = createSelectField({ - label, - options: CUT_CLASS_OPTIONS, - value: current, - onChange: (value) => { - state.cut_slope_class = { ...(state.cut_slope_class ?? {}), [kind]: value }; - persist(); - applyCutSlopeClassChoice(state.cut_slope_class); - onApplyAll?.(); - }, - }); - cutClassWrap.append(field.root); - } - // 처음 세울 때도 고른 값을 검사에 반영한다(세션에 남아 있던 선택 포함). - applyCutSlopeClassChoice(state.cut_slope_class); - // 횡단 반폭은 사이드의 **별도 컨테이너**로 뺐다(2026-08-23) — 여기는 표준단면 설정만. - root.append(body, cutClassWrap, loader, actions); + root.append(body, loader, actions); return { root, diff --git a/common_util/common_util_mass_haul_balance.ts b/common_util/common_util_mass_haul_balance.ts index 31c454a7..1396df92 100644 --- a/common_util/common_util_mass_haul_balance.ts +++ b/common_util/common_util_mass_haul_balance.ts @@ -38,7 +38,7 @@ * 즉 **수평선의 높이는 그 현(弦)의 길이가 장비 경계거리와 같아지는 높이**다. 누가토량 * 그래프에서 세로축이 곧 토량이므로, 두 수평선 사이 띠의 두께가 그 장비가 옮기는 토량이다. * 현 길이 20m 되는 높이 위쪽 → 종무대 - * 거기서 70m 되는 높이까지 → 도쟈 + * 거기서 60m 되는 높이까지 → 도쟈 * 그 아래 ~ 평형선 → 덤프 * 경계값 정의처는 `config_system.EARTHWORK_HAUL_EQUIPMENT_LIMITS_M` 한 곳뿐이다. * diff --git a/config/config_system_design.py b/config/config_system_design.py index bfb4360d..6811f5c9 100644 --- a/config/config_system_design.py +++ b/config/config_system_design.py @@ -46,29 +46,6 @@ ROUTE_GRADE_CLASSES = ("trunk", "fire", "work", "branch") FOREST_ROAD_MAX_GRADE = {"trunk": 0.26, "fire": 0.26, "branch": 0.28, "work": 0.40} FOREST_ROAD_MIN_CURVE_R_M = {"trunk": 12.0, "fire": 12.0, "branch": 10.0, "work": 6.0} -# ───────────────────────────────────────────────────────────────────────── -# 절토 비탈 법정 기울기 (별표2) -# -# 근거 — 지식DB `resources/knowledge/technical_info/01_임도/02_상세설계/절토_비탈면.md` §1. -# 그 문서의 [구현] 줄대로 **판정은 별표2 범위로** 한다(실무 관행값은 후보일 뿐 기준이 아님). -# 값은 수직 1 에 대한 수평(1:n 의 n). -# ───────────────────────────────────────────────────────────────────────── -FOREST_ROAD_CUT_SLOPE_LIMITS = { - "hard_rock": (0.3, 0.8), # 암석지 — 경암 - "soft_rock": (0.5, 1.2), # 암석지 — 연암 - "soil": (0.8, 1.5), # 토사지역 -} -# 프로그램 지반유형(리핑암·발파암) → 별표2 줄(연암·경암). -# **기본값이며 사용자가 바꿀 수 있다**(2026-09-07 사용자 확정 — 「사용자가 제어할 수 있게」). -# 별표2 는 경암·연암으로 가르고 프로그램은 리핑암·발파암으로 가르는데, 둘을 잇는 문장이 -# 법령·교본에 없다. 그래서 법정 근거가 아니라 **프로그램 설정**으로 두고 화면에서 고르게 한다. -FOREST_ROAD_CUT_SLOPE_CLASS_DEFAULT = { - "ripping_rock": "soft_rock", - "blasting_rock": "hard_rock", -} -# 절토 기울기 규정이 없는 등급 — 작업임도(별표2 §1 「작업임도: 절토 기울기 표 규정 없음」). -FOREST_ROAD_CUT_SLOPE_EXEMPT_GRADES = ("work",) - # 대안(정속경사) 파라미터 ROUTE_ALT_MIN_GRADE = float(os.getenv("ROUTE_ALT_MIN_GRADE", "0.08")) ROUTE_ALT_MAX_GRADE = float(os.getenv("ROUTE_ALT_MAX_GRADE", "0.14")) @@ -402,9 +379,13 @@ EARTHWORK_CONVERSION_FACTORS = { # 평균운반거리(m)로 운반장비를 고른다. 위에서부터 순서대로 검사해 `max_distance_m` # **이하**면 그 장비를 쓰고, 마지막 항목(None)이 나머지를 전부 받는다. # -# 종무대(무대운반) ≤ 20m < 도쟈(불도저 압토) ≤ 70m < 덤프트럭 +# 종무대(무대운반) ≤ 20m < 도쟈(불도저 압토) ≤ 60m < 덤프트럭 # -# 2026-08-02 사용자 확정값(도쟈 50 → 70m). 유토곡선의 장비 경계현은 이 값을 +# 2026-09-07 사용자 확정값(도쟈 70 → 60m). 근거 — 실무 오솔길 `EARTH.DAT` 헤더 6개 +# 공사지가 전부 `20.0 / 60.0`(거창·장수·진안·봉화·영월 본선·지선), 산림과임업기술 +# 5장 「다. 공사수량의 산출」이 「도저운반성토 60m 이하 / 덤프운반성토 60m 초과 +# (건설표준품셈 참조)」로 못 박음. 70m 는 Aislo 단독값이었음(2026-08-02 잠정 확정). +# 유토곡선의 장비 경계현은 이 값을 # **수평 현의 길이**로 읽는다 — 현 길이가 20m가 되는 높이 위쪽이 종무대 몫, # 70m가 되는 높이까지가 도쟈 몫, 그 아래가 덤프 몫이다. # 현장·발주처 기준에 따라 달라질 수 있으므로 @@ -416,7 +397,7 @@ EARTHWORK_CONVERSION_FACTORS = { # ───────────────────────────────────────────────────────────────────────── EARTHWORK_HAUL_EQUIPMENT_LIMITS_M = ( ("free_haul", 20.0), - ("dozer", 70.0), + ("dozer", 60.0), ("dump_truck", None), )