diff --git a/B07_DesignDetail/openwebcad/src/inputController/ime-sink.ts b/B07_DesignDetail/openwebcad/src/inputController/ime-sink.ts
index 327220356..ae60c87a3 100644
--- a/B07_DesignDetail/openwebcad/src/inputController/ime-sink.ts
+++ b/B07_DesignDetail/openwebcad/src/inputController/ime-sink.ts
@@ -9,12 +9,33 @@ import { getActiveToolActor } from '../state.ts';
 export const isImeKey = (evt: KeyboardEvent): boolean =>
 	evt.isComposing || evt.keyCode === 229 || evt.key === 'Process';
 
+/** 활성 도구의 지금 단계 설정(평평한 단계만) */
+const activeStateConfig = () => {
+	const snapshot = getActiveToolActor()?.getSnapshot();
+	return snapshot?.machine?.states?.[snapshot?.value]?.config;
+};
+
 /** 활성 도구의 지금 단계가 TEXT_INPUT 을 받는가 */
 export function activeToolAcceptsText(): boolean {
-	const snapshot = getActiveToolActor()?.getSnapshot();
-	return !!snapshot?.machine?.states?.[snapshot?.value]?.config?.on?.TEXT_INPUT;
+	return !!activeStateConfig()?.on?.TEXT_INPUT;
 }
 
+/** 지금 단계가 점(`x,y`)을 받는가 — 한 번 스냅 이름 · 선택지 판정 */
+export function activeToolWantsPoint(): boolean {
+	return !!activeStateConfig()?.on?.ABSOLUTE_POINT_INPUT;
+}
+
+/** 지금 단계가 이 글을 받는가 — 점 단계는 선택지 글자(meta.options · 선 C · U)만 · 나머지는 명령 이름으로 */
+export function activeToolTakesText(text: string): boolean {
+	if (!activeToolAcceptsText()) return false;
+	if (!activeToolWantsPoint()) return true;
+	const options = (activeStateConfig()?.meta as { options?: string[] } | undefined)?.options;
+	return !!options?.includes(text);
+}
+
+/** 한글 받개에 초점을 줄 단계 — 글은 받되 점 단계 선택지(영문 C · U)는 아님 */
+export const activeToolWantsIme = (): boolean => activeToolAcceptsText() && !activeToolWantsPoint();
+
 /** 지금 단계가 자유 글(TEXT · MTEXT · 표 칸 · 이름 …)을 받는가 — Space 가 띄어쓰기(아니면 Enter) */
 export function activeToolWantsFreeText(): boolean {
 	const meta = getActiveToolActor()?.getSnapshot()?.getMeta?.() as
diff --git a/B07_DesignDetail/openwebcad/src/inputController/input-controller.ts b/B07_DesignDetail/openwebcad/src/inputController/input-controller.ts
index 768d6fec9..5c257cfc6 100644
--- a/B07_DesignDetail/openwebcad/src/inputController/input-controller.ts
+++ b/B07_DesignDetail/openwebcad/src/inputController/input-controller.ts
@@ -17,6 +17,7 @@ import { getClosestSnapPointWithinRadius } from '../helpers/get-closest-snap-poi
 import { pickRadius } from '../helpers/pick-radius.ts';
 import {
 	getActiveToolActor,
+	getAngleGuideOriginPoint,
 	getAngleStep,
 	getCanvas,
 	getPickableEntities,
@@ -46,8 +47,10 @@ import { Tool } from '../tools.ts';
 import { SelectState, selectToolStateMachine } from '../tools/select-tool.ts';
 import { ActorEvent, type MouseClickEvent, type TextInputEvent } from '../tools/tool.types.ts';
 import {
-	activeToolAcceptsText,
+	activeToolTakesText,
 	activeToolWantsFreeText,
+	activeToolWantsIme,
+	activeToolWantsPoint,
 	ImeSink,
 	isImeKey,
 	isPlainSpace,
@@ -58,6 +61,13 @@ import { wheelZoom } from './input-wheel.ts';
 import { attachTouch } from './input-touch.ts';
 import { ANGLE_LOCK_REGEXP, parsePointText, type PointTextEvent } from './input-patterns.ts';
 import { angleLockHint, setAngleLock } from './input-angle-lock.ts';
+import {
+	getSnapOverride,
+	isSnapName,
+	setSnapOverride,
+	snapOverrideHint,
+	snapOverridePoint,
+} from './input-snap-override.ts';
 
 /** 이만큼 넘게 끌면 클릭이 아니라 드래그로 본다 (화면 픽셀) */
 const DRAG_SELECT_MIN_PX = 4;
@@ -112,7 +122,7 @@ export class InputController {
 	}
 
 	public draw(drawController: ScreenCanvasDrawController) {
-		this.ime.sync(activeToolAcceptsText());
+		this.ime.sync(activeToolWantsIme());
 		const toolInstruction = getLastStateInstructions();
 		const texts: string[] = [];
 		if (toolInstruction) {
@@ -122,8 +132,7 @@ export class InputController {
 			const roundedY = round(drawController.getWorldMouseLocation().y, 2);
 			texts.push(`${roundedX},${roundedY}`);
 		}
-		const lockHint = angleLockHint();
-		if (lockHint) texts.push(lockHint);
+		texts.push(...compact([angleLockHint(), snapOverrideHint()]));
 		// 입력 중인 문자로 시작하는 명령 후보. 예: C => CIRCLE (C), COPY (CO)
 		texts.push(...this.getCommandSuggestions());
 		// 입력 글(조합 중인 한글도 함께)
@@ -173,7 +182,7 @@ export class InputController {
 				return;
 			}
 			this.sendMouseClick(evt);
-			this.ime.sync(activeToolAcceptsText()); // 클릭으로 문자 단계에 들면 바로 한글 받개로
+			this.ime.sync(activeToolWantsIme()); // 클릭으로 문자 단계에 들면 바로 한글 받개로
 		}
 	}
 
@@ -200,7 +209,12 @@ export class InputController {
 		const worldMouseLocationTemp = screenCanvasDrawController.targetToWorld(
 			this.getCanvasPoint(evt)
 		);
-		const worldMouseLocation = closestSnapPoint ? closestSnapPoint.point : worldMouseLocationTemp;
+		let worldMouseLocation = closestSnapPoint ? closestSnapPoint.point : worldMouseLocationTemp;
+		if (getSnapOverride()) {
+			const snapped = snapOverridePoint(worldMouseLocationTemp, getAngleGuideOriginPoint());
+			if (!snapped) return; // 맞는 점 없음 — 다시 누르기를 기다림
+			worldMouseLocation = snapped;
+		}
 
 		this.sendPointEvent({
 			type: ActorEvent.MOUSE_CLICK,
@@ -408,12 +422,12 @@ export class InputController {
 		} else if (evt.key === 'Enter') {
 			// User wants to submit the input or submit the action
 			this.handleEnterKey(true);
-			this.ime.sync(activeToolAcceptsText());
+			this.ime.sync(activeToolWantsIme());
 		} else if (evt.key === ' ' && !activeToolWantsFreeText()) {
 			// Space = Enter(오토캐드) · 글 단계는 아래 띄어쓰기 · 수정키 · 길게 눌러 반복은 무시
 			if (isPlainSpace(evt)) {
 				this.handleEnterKey(true);
-				this.ime.sync(activeToolAcceptsText());
+				this.ime.sync(activeToolWantsIme());
 			}
 		} else if (evt.key === 'ArrowDown') {
 			// Move the screen down
@@ -438,6 +452,7 @@ export class InputController {
 
 	public handleEscapeKey() {
 		setAngleLock(null);
+		setSnapOverride(null);
 		if (getSelectedEntities().length > 0) {
 			// Deselect entities
 			setSelectedEntityIds([]);
@@ -463,7 +478,6 @@ export class InputController {
 	/** @param repeatIfIdle 키보드 Enter · Space — 빈 입력 + 선택 도구 대기면 마지막 명령 반복(우클릭은 확정만) */
 	public handleEnterKey(repeatIfIdle = false) {
 		// submit the text as input to the active tool and clear the input field
-		const activeToolCanHandleTextInput = activeToolAcceptsText();
 
 		if (this.text === '') {
 			console.log('ENTER: ', {
@@ -496,8 +510,12 @@ export class InputController {
 			// 거리 `100` · `x,y` · `@x,y` · `@d<a` · `d<a`
 			this.sendPointEvent(this.pointEventFromText() as PointTextEvent);
 			this.text = '';
-		} else if (activeToolCanHandleTextInput) {
-			// 지금 단계의 선택지(배열 L/R · 숫자 단계 글)
+		} else if (isSnapName(this.text) && activeToolWantsPoint()) {
+			// 한 번 스냅 END · MID · … — 다음 한 점만
+			setSnapOverride(this.text);
+			this.text = '';
+		} else if (activeToolTakesText(this.text)) {
+			// 지금 단계의 선택지(선 C · U · 배열 L/R · 숫자 단계 글)
 			this.sendText();
 		} else if (resolveCommandInput(this.text)) {
 			// 명령 이름 또는 AutoCAD 별칭을 입력했다. 예: L, LINE, REC
@@ -531,10 +549,11 @@ export class InputController {
 		);
 	}
 
-	/** 점 하나를 도구에 보냄 — 각도 고정은 이 한 점으로 끝 */
+	/** 점 하나를 도구에 보냄 — 각도 고정 · 한 번 스냅은 이 한 점으로 끝 */
 	private sendPointEvent(event: PointTextEvent | MouseClickEvent) {
 		getActiveToolActor()?.send(event);
 		setAngleLock(null);
+		setSnapOverride(null);
 	}
 
 	public handleUndo(evt: KeyboardEvent) {
diff --git a/B07_DesignDetail/openwebcad/src/inputController/input-snap-override.ts b/B07_DesignDetail/openwebcad/src/inputController/input-snap-override.ts
new file mode 100644
index 000000000..276f017c5
--- /dev/null
+++ b/B07_DesignDetail/openwebcad/src/inputController/input-snap-override.ts
@@ -0,0 +1,80 @@
+/**
+ * 한 번 스냅 — 점 단계에서 END · MID · CEN · INT · PER · NEA · NON 을 치면 다음 한 점만 그 스냅(오토캐드).
+ * F3(객체 스냅) 꺼져 있어도 먹음. 커서 둘레에 맞는 점이 없으면 클릭을 버리고 기다림 · Esc 로 풂.
+ */
+import type { Point } from '@flatten-js/core';
+import { SNAP_POINT_DISTANCE } from '../App.consts.ts';
+import { SnapPointType } from '../App.types.ts';
+import { findClosestEntity } from '../helpers/find-closest-entity.ts';
+import { getIntersectionPoints } from '../helpers/get-intersection-points.ts';
+import { queryEntitiesNearPoint } from '../helpers/spatial-index.ts';
+import { getLayerById, getScreenCanvasDrawController } from '../state.ts';
+
+const SNAP_LABELS = {
+	END: '끝점',
+	MID: '중간점',
+	CEN: '중심',
+	INT: '교차점',
+	PER: '수직',
+	NEA: '근처점',
+	NON: '스냅 없음',
+} as const;
+type SnapName = keyof typeof SNAP_LABELS;
+
+const SNAP_TYPES: Partial<Record<SnapName, SnapPointType>> = {
+	END: SnapPointType.LineEndPoint,
+	MID: SnapPointType.LineMidPoint,
+	CEN: SnapPointType.CircleCenter,
+};
+
+let override: SnapName | null = null;
+
+export const getSnapOverride = (): SnapName | null => override;
+export const setSnapOverride = (name: SnapName | null) => {
+	override = name;
+};
+export const isSnapName = (text: string): text is SnapName => text in SNAP_LABELS;
+
+/** 커서 옆 안내 줄 */
+export const snapOverrideHint = (): string | null =>
+	override ? `${SNAP_LABELS[override]}(${override}) 한 번 — 점 지정` : null;
+
+const closest = (points: Point[], mouse: Point, radius: number): Point | null => {
+	let best: Point | null = null;
+	let bestDistance = radius;
+	for (const point of points) {
+		const distance = Math.hypot(point.x - mouse.x, point.y - mouse.y);
+		if (distance <= bestDistance) {
+			best = point;
+			bestDistance = distance;
+		}
+	}
+	return best;
+};
+
+/** 한 번 스냅이 고른 점 · 맞는 점 없으면 null. base = 앞 점(PER 기준) */
+export function snapOverridePoint(mouse: Point, base: Point | null): Point | null {
+	if (override === 'NON') return mouse;
+	// ponytail: 일반 스냅(15px)의 두 배 둘레 — 오토캐드 조준 상자 크기 설정이 필요하면 설정 모달로
+	const radius = (SNAP_POINT_DISTANCE * 2) / getScreenCanvasDrawController().getScreenScale();
+	const entities = queryEntitiesNearPoint(mouse.x, mouse.y, radius).filter(
+		(entity) => !getLayerById(entity.layerId)?.isLocked
+	);
+	const type = override ? SNAP_TYPES[override] : undefined;
+	if (type) {
+		const points = entities.flatMap((entity) =>
+			entity
+				.getSnapPoints()
+				.filter((snap) => snap.type === type)
+				.map((snap) => snap.point)
+		);
+		return closest(points, mouse, radius);
+	}
+	if (override === 'INT') return closest(getIntersectionPoints(entities), mouse, radius);
+	const near = findClosestEntity(mouse, entities);
+	if (!near.entity || near.distance > radius) return null;
+	if (override === 'NEA') return near.segment.start;
+	// PER — 앞 점에서 커서 아래 객체로 내린 발(선분이면 수선의 발)
+	if (!base) return null;
+	return near.entity.distanceTo(base)?.[1].start ?? null;
+}
diff --git a/B07_DesignDetail/openwebcad/src/tools/align-tool.helpers.ts b/B07_DesignDetail/openwebcad/src/tools/align-tool.helpers.ts
index 0f1c2c495..fac184b20 100644
--- a/B07_DesignDetail/openwebcad/src/tools/align-tool.helpers.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/align-tool.helpers.ts
@@ -57,7 +57,7 @@ export function GET_ALIGN_TOOL_STATE(type: Tool): MachineContext {
 			[AlignState.WAITING_FOR_SELECTION]: {
 				description: 'Select what you want to align',
 				meta: {
-					instructions: 'Select what you want to align, then ENTER',
+					instructions: '정렬할 객체 선택 뒤 Enter',
 				},
 				invoke: {
 					id: 'selectToolInsideTheAlignTool',
diff --git a/B07_DesignDetail/openwebcad/src/tools/array-tool.ts b/B07_DesignDetail/openwebcad/src/tools/array-tool.ts
index 2fd83edff..be817e7d2 100644
--- a/B07_DesignDetail/openwebcad/src/tools/array-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/array-tool.ts
@@ -91,7 +91,7 @@ export const arrayToolStateMachine = createMachine(
 			[ArrayState.WAITING_FOR_SELECTION]: {
 				description: 'Select what you want to copy',
 				meta: {
-					instructions: 'Select what you want to copy, then ENTER',
+					instructions: '배열할 객체 선택 뒤 Enter',
 				},
 				invoke: {
 					id: 'selectToolInsideTheCopyTool',
@@ -145,7 +145,7 @@ export const arrayToolStateMachine = createMachine(
 				],
 			},
 			[ArrayState.ASK_COPY_MODE]: {
-				meta: { instructions: 'Choose copy mode: Linear (L) or Radial (R), ENTER for Linear' },
+				meta: { instructions: '배열 방식 [직선(L)/원형(R)] <직선>:' },
 				on: {
 					TEXT_INPUT: {
 						actions: assign(({ event }) => {
@@ -168,7 +168,7 @@ export const arrayToolStateMachine = createMachine(
 				},
 			},
 			[ArrayState.ASK_NUMBER_OF_COPIES]: {
-				meta: { instructions: 'Enter number of copies' },
+				meta: { instructions: '복사 개수 입력:' },
 				on: {
 					NUMBER_INPUT: [
 						{
@@ -196,7 +196,7 @@ export const arrayToolStateMachine = createMachine(
 				},
 			},
 			[ArrayState.LINEAR_WAITING_FOR_START_POINT]: {
-				meta: { instructions: 'Click to define the start of the distance vector' },
+				meta: { instructions: '간격 시작점 지정:' },
 				on: {
 					ABSOLUTE_POINT_INPUT: {
 						actions: assign(({ event }) => ({
@@ -216,7 +216,7 @@ export const arrayToolStateMachine = createMachine(
 				},
 			},
 			[ArrayState.LINEAR_WAITING_FOR_END_POINT]: {
-				meta: { instructions: 'Click to define the end of the distance vector' },
+				meta: { instructions: '간격 끝점 지정:' },
 				on: {
 					RELATIVE_POINT_INPUT: {
 						actions: assign(({ event, context }) => ({
@@ -245,7 +245,7 @@ export const arrayToolStateMachine = createMachine(
 				},
 			},
 			[ArrayState.RADIAL_WAITING_FOR_PIVOT_POINT]: {
-				meta: { instructions: 'Click to set pivot point' },
+				meta: { instructions: '회전 중심점 지정:' },
 				on: {
 					ABSOLUTE_POINT_INPUT: {
 						actions: assign(({ event }) => ({
@@ -265,7 +265,7 @@ export const arrayToolStateMachine = createMachine(
 				},
 			},
 			[ArrayState.RADIAL_WAITING_FOR_ANGLE]: {
-				meta: { instructions: 'Enter angle per step (in degrees)' },
+				meta: { instructions: '한 칸 각도(도) 입력:' },
 				on: {
 					NUMBER_INPUT: {
 						target: ArrayState.EXECUTE_COPY,
diff --git a/B07_DesignDetail/openwebcad/src/tools/circle-tool.ts b/B07_DesignDetail/openwebcad/src/tools/circle-tool.ts
index cbd81db8f..8f992f6c9 100644
--- a/B07_DesignDetail/openwebcad/src/tools/circle-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/circle-tool.ts
@@ -60,7 +60,7 @@ export const circleToolStateMachine = createMachine(
 			[CircleState.WAITING_FOR_CENTER_POINT]: {
 				description: 'Select the center point of the circle tool',
 				meta: {
-					instructions: 'Select the center point of the circle',
+					instructions: '중심점 지정 (x,y):',
 				},
 				on: {
 					MOUSE_CLICK: {
@@ -79,7 +79,7 @@ export const circleToolStateMachine = createMachine(
 			[CircleState.WAITING_FOR_POINT_ON_CIRCLE]: {
 				description: 'Select a point on the circle',
 				meta: {
-					instructions: 'Select the point on the circle',
+					instructions: '원 위의 점 지정 또는 반지름 입력:',
 				},
 				on: {
 					DRAW: {
diff --git a/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts b/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts
index 25b7d8542..2a24a8503 100644
--- a/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/copy-tool.ts
@@ -97,7 +97,7 @@ export const copyToolStateMachine = createMachine(
 			[CopyState.WAITING_FOR_SELECTION]: {
 				description: 'Select what you want to copy',
 				meta: {
-					instructions: 'Select what you want to copy, then ENTER',
+					instructions: '복사할 객체 선택 뒤 Enter',
 				},
 				invoke: {
 					id: 'selectToolInsideTheCopyTool',
@@ -136,9 +136,9 @@ export const copyToolStateMachine = createMachine(
 				},
 			},
 			[CopyState.WAITING_FOR_START_COPY_POINT]: {
-				description: 'Select the start of the copy line',
+				description: '기준점 지정 (x,y):',
 				meta: {
-					instructions: 'Select the start of the copy line',
+					instructions: '기준점 지정 (x,y):',
 				},
 				always: {
 					actions: CopyAction.ENABLE_HELPERS,
@@ -159,9 +159,9 @@ export const copyToolStateMachine = createMachine(
 				},
 			},
 			[CopyState.WAITING_FOR_END_COPY_POINT]: {
-				description: 'Select the end of the copy line',
+				description: '둘째 점 지정 (길이 · <각도 · @x,y):',
 				meta: {
-					instructions: 'Select the end of the copy line',
+					instructions: '둘째 점 지정 (길이 · <각도 · @x,y):',
 				},
 				on: {
 					DRAW: {
diff --git a/B07_DesignDetail/openwebcad/src/tools/eraser-tool.ts b/B07_DesignDetail/openwebcad/src/tools/eraser-tool.ts
index 5aedd0898..933a54d2e 100644
--- a/B07_DesignDetail/openwebcad/src/tools/eraser-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/eraser-tool.ts
@@ -60,9 +60,9 @@ export const eraserToolStateMachine = createMachine(
 				},
 			},
 			[EraserState.WAITING_FOR_FIRST_CLICK]: {
-				description: 'Select a line segment to delete',
+				description: '지울 선 선택',
 				meta: {
-					instructions: 'Select a line segment to delete',
+					instructions: '지울 선 선택',
 				},
 				on: {
 					// TODO implement a DRAW action to draw the segment that will be erased in dotted line
diff --git a/B07_DesignDetail/openwebcad/src/tools/image-import-tool.ts b/B07_DesignDetail/openwebcad/src/tools/image-import-tool.ts
index 81f9b313b..ab3070427 100644
--- a/B07_DesignDetail/openwebcad/src/tools/image-import-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/image-import-tool.ts
@@ -70,9 +70,9 @@ export const imageImportToolStateMachine = createMachine(
 				},
 			},
 			[ImageImportState.WAIT_FOR_IMAGE_DATA]: {
-				description: 'Select an image file to import',
+				description: '가져올 그림 파일 선택',
 				meta: {
-					instructions: 'Select an image file to import',
+					instructions: '가져올 그림 파일 선택',
 				},
 				on: {
 					[ActorEvent.FILE_SELECTED]: {
@@ -85,9 +85,9 @@ export const imageImportToolStateMachine = createMachine(
 				},
 			},
 			[ImageImportState.WAITING_FOR_START_POINT]: {
-				description: 'Select the start point of the imageImport',
+				description: '그림 첫 모서리 지정:',
 				meta: {
-					instructions: 'Select the start point of the imageImport',
+					instructions: '그림 첫 모서리 지정:',
 				},
 				on: {
 					MOUSE_CLICK: {
@@ -101,9 +101,9 @@ export const imageImportToolStateMachine = createMachine(
 				},
 			},
 			[ImageImportState.WAITING_FOR_END_POINT]: {
-				description: 'Select the end point of the imageImport',
+				description: '그림 맞은 모서리 지정:',
 				meta: {
-					instructions: 'Select the end point of the imageImport',
+					instructions: '그림 맞은 모서리 지정:',
 				},
 				on: {
 					DRAW: {
diff --git a/B07_DesignDetail/openwebcad/src/tools/line-tool.ts b/B07_DesignDetail/openwebcad/src/tools/line-tool.ts
index 4ea1cb27a..2f02d7f85 100644
--- a/B07_DesignDetail/openwebcad/src/tools/line-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/line-tool.ts
@@ -2,6 +2,7 @@ import type { Point } from '@flatten-js/core';
 import { LineEntity } from '../entities/LineEntity';
 import {
 	addEntities,
+	deleteEntities,
 	getActiveLayerId,
 	getActiveLineColor,
 	getActiveLineDash,
@@ -14,12 +15,22 @@ import {
 } from '../state';
 import { Tool } from '../tools';
 import { Actor, assign, createMachine } from 'xstate';
-import type { DrawEvent, PointInputEvent, StateEvent, ToolContext } from './tool.types';
+import type {
+	DrawEvent,
+	PointInputEvent,
+	StateEvent,
+	TextInputEvent,
+	ToolContext,
+} from './tool.types';
 import { selectToolStateMachine } from './select-tool.ts';
 import { getPointFromEvent } from '../helpers/get-point-from-event.ts';
 
 export interface LineContext extends ToolContext {
 	startPoint: Point | null;
+	/** 이번 이어 그리기의 첫 점 — 닫기(C) */
+	firstPoint: Point | null;
+	/** 이번 이어 그리기에서 그린 구간 — 명령취소(U) */
+	segments: LineEntity[];
 }
 
 export enum LineState {
@@ -33,6 +44,8 @@ export enum LineAction {
 	RECORD_START_POINT = 'RECORD_START_POINT',
 	DRAW_TEMP_LINE = 'DRAW_TEMP_LINE',
 	DRAW_FINAL_LINE = 'DRAW_FINAL_LINE',
+	CLOSE_LINE = 'CLOSE_LINE',
+	UNDO_SEGMENT = 'UNDO_SEGMENT',
 	SWITCH_TO_SELECT_TOOL = 'SWITCH_TO_SELECT_TOOL',
 }
 
@@ -44,6 +57,8 @@ export const lineToolStateMachine = createMachine(
 		},
 		context: {
 			startPoint: null,
+			firstPoint: null,
+			segments: [],
 			type: Tool.LINE,
 		},
 		initial: LineState.INIT,
@@ -58,7 +73,7 @@ export const lineToolStateMachine = createMachine(
 			[LineState.WAITING_FOR_START_POINT]: {
 				description: 'Select the start point of the line',
 				meta: {
-					instructions: 'Select the start point of the line',
+					instructions: '첫 점 지정 (x,y):',
 				},
 				on: {
 					MOUSE_CLICK: {
@@ -77,7 +92,8 @@ export const lineToolStateMachine = createMachine(
 			[LineState.WAITING_FOR_END_POINT]: {
 				description: 'Select the end point of the line',
 				meta: {
-					instructions: 'Select the end point of the line',
+					instructions: '다음 점 지정 또는 [닫기(C)/명령취소(U)]:',
+					options: ['C', 'U'],
 				},
 				on: {
 					DRAW: {
@@ -99,6 +115,21 @@ export const lineToolStateMachine = createMachine(
 						actions: LineAction.DRAW_FINAL_LINE,
 						target: LineState.WAITING_FOR_END_POINT,
 					},
+					TEXT_INPUT: [
+						{
+							// 닫기 — 둘째 선부터 · 첫 점으로 잇고 끝
+							guard: ({ context, event }) =>
+								(event as TextInputEvent).value === 'C' && context.segments.length >= 2,
+							actions: LineAction.CLOSE_LINE,
+							target: LineState.INIT,
+						},
+						{
+							// 명령취소 — 마지막 구간만
+							guard: ({ context, event }) =>
+								(event as TextInputEvent).value === 'U' && context.segments.length > 0,
+							actions: LineAction.UNDO_SEGMENT,
+						},
+					],
 					ESC: {
 						target: LineState.INIT,
 					},
@@ -118,6 +149,8 @@ export const lineToolStateMachine = createMachine(
 				setAngleGuideOriginPoint(null);
 				return {
 					startPoint: null,
+					firstPoint: null,
+					segments: [],
 				};
 			}),
 			[LineAction.RECORD_START_POINT]: assign(({ event }) => {
@@ -125,6 +158,8 @@ export const lineToolStateMachine = createMachine(
 				setAngleGuideOriginPoint(startPoint);
 				return {
 					startPoint,
+					firstPoint: startPoint,
+					segments: [],
 				};
 			}),
 			[LineAction.DRAW_TEMP_LINE]: ({ context, event }) => {
@@ -159,8 +194,28 @@ export const lineToolStateMachine = createMachine(
 				setAngleGuideOriginPoint(endPoint);
 				return {
 					startPoint: endPoint,
+					segments: [...context.segments, activeLine],
 				};
 			}),
+			[LineAction.CLOSE_LINE]: ({ context }) => {
+				const closing = new LineEntity(
+					getActiveLayerId(),
+					context.startPoint as Point,
+					context.firstPoint as Point
+				);
+				closing.lineColor = getActiveLineColor();
+				closing.lineWidth = getActiveLineWidth();
+				closing.lineDash = getActiveLineDash();
+				addEntities([closing], true);
+			},
+			[LineAction.UNDO_SEGMENT]: assign(({ context }) => {
+				const last = context.segments[context.segments.length - 1];
+				deleteEntities([last], true);
+				const startPoint = last.getStartPoint();
+				setGhostHelperEntities([new LineEntity(getActiveLayerId(), startPoint, startPoint)]);
+				setAngleGuideOriginPoint(startPoint);
+				return { startPoint, segments: context.segments.slice(0, -1) };
+			}),
 			[LineAction.SWITCH_TO_SELECT_TOOL]: () => {
 				setActiveToolActor(new Actor(selectToolStateMachine));
 			},
diff --git a/B07_DesignDetail/openwebcad/src/tools/move-tool.ts b/B07_DesignDetail/openwebcad/src/tools/move-tool.ts
index a2fe3cbfd..3517c1ce4 100644
--- a/B07_DesignDetail/openwebcad/src/tools/move-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/move-tool.ts
@@ -98,7 +98,7 @@ export const moveToolStateMachine = createMachine(
 			[MoveState.WAITING_FOR_SELECTION]: {
 				description: 'Select what you want to move',
 				meta: {
-					instructions: 'Select what you want to move, then ENTER',
+					instructions: '이동할 객체 선택 뒤 Enter',
 				},
 				invoke: {
 					id: 'selectToolInsideTheMoveTool',
@@ -137,9 +137,9 @@ export const moveToolStateMachine = createMachine(
 				},
 			},
 			[MoveState.WAITING_FOR_START_MOVE_POINT]: {
-				description: 'Select the start of the move line',
+				description: '기준점 지정 (x,y):',
 				meta: {
-					instructions: 'Select the start of the move line',
+					instructions: '기준점 지정 (x,y):',
 				},
 				always: {
 					actions: MoveAction.ENABLE_HELPERS,
@@ -160,9 +160,9 @@ export const moveToolStateMachine = createMachine(
 				},
 			},
 			[MoveState.WAITING_FOR_END_MOVE_POINT]: {
-				description: 'Select the end of the move line',
+				description: '둘째 점 지정 (길이 · <각도 · @x,y):',
 				meta: {
-					instructions: 'Select the end of the move line',
+					instructions: '둘째 점 지정 (길이 · <각도 · @x,y):',
 				},
 				on: {
 					DRAW: {
diff --git a/B07_DesignDetail/openwebcad/src/tools/pedit-tool.ts b/B07_DesignDetail/openwebcad/src/tools/pedit-tool.ts
index d00c3874f..83c7f330b 100644
--- a/B07_DesignDetail/openwebcad/src/tools/pedit-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/pedit-tool.ts
@@ -75,7 +75,7 @@ export const peditToolStateMachine = createMachine(
 			[PeditState.WAITING_FOR_SELECTION]: {
 				description: 'Select the entities that you want to combine into a polyline',
 				meta: {
-					instructions: 'Select what you want to combine into a polyline, then ENTER',
+					instructions: '폴리선으로 합칠 객체 선택 뒤 Enter',
 				},
 				invoke: {
 					id: 'selectToolInsideThePeditTool',
diff --git a/B07_DesignDetail/openwebcad/src/tools/rectangle-tool.ts b/B07_DesignDetail/openwebcad/src/tools/rectangle-tool.ts
index aa375f5d6..afee826d8 100644
--- a/B07_DesignDetail/openwebcad/src/tools/rectangle-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/rectangle-tool.ts
@@ -53,9 +53,9 @@ export const rectangleToolStateMachine = createMachine(
 				},
 			},
 			[RectangleState.WAITING_FOR_START_POINT]: {
-				description: 'Select the start point of the rectangle',
+				description: '첫 모서리 지정 (x,y):',
 				meta: {
-					instructions: 'Select the start point of the rectangle',
+					instructions: '첫 모서리 지정 (x,y):',
 				},
 				on: {
 					MOUSE_CLICK: {
@@ -69,9 +69,9 @@ export const rectangleToolStateMachine = createMachine(
 				},
 			},
 			[RectangleState.WAITING_FOR_END_POINT]: {
-				description: 'Select the end point of the rectangle',
+				description: '맞은 모서리 지정 (@x,y):',
 				meta: {
-					instructions: 'Select the end point of the rectangle',
+					instructions: '맞은 모서리 지정 (@x,y):',
 				},
 				on: {
 					DRAW: {
diff --git a/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts b/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts
index c2930e017..619c7e63e 100644
--- a/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/rotate-tool.ts
@@ -105,7 +105,7 @@ export const rotateToolStateMachine = createMachine(
 			[RotateState.WAITING_FOR_SELECTION]: {
 				description: 'Select what you want to rotate',
 				meta: {
-					instructions: 'Select what you want to rotate, then ENTER',
+					instructions: '회전할 객체 선택 뒤 Enter',
 				},
 				invoke: {
 					id: 'selectToolInsideTheRotateTool',
@@ -144,9 +144,9 @@ export const rotateToolStateMachine = createMachine(
 				},
 			},
 			[RotateState.WAITING_FOR_ROTATION_ORIGIN]: {
-				description: 'Select the origin of the rotate operation',
+				description: '기준점 지정 (x,y):',
 				meta: {
-					instructions: 'Select the origin of the rotate operation',
+					instructions: '기준점 지정 (x,y):',
 				},
 				always: {
 					actions: RotateAction.ENABLE_HELPERS,
@@ -167,9 +167,9 @@ export const rotateToolStateMachine = createMachine(
 				},
 			},
 			[RotateState.WAITING_FOR_ANGLE_START_POINT]: {
-				description: 'Select the end of the base rotate line',
+				description: '회전 각도 입력 또는 기준선 끝점 지정:',
 				meta: {
-					instructions: 'Select the end of the base rotate line',
+					instructions: '회전 각도 입력 또는 기준선 끝점 지정:',
 				},
 				on: {
 					MOUSE_CLICK: {
@@ -195,9 +195,9 @@ export const rotateToolStateMachine = createMachine(
 				},
 			},
 			[RotateState.WAITING_FOR_ANGLE_END_POINT]: {
-				description: 'Select the end of the rotate line',
+				description: '회전 방향 점 지정:',
 				meta: {
-					instructions: 'Select the end of the rotate line',
+					instructions: '회전 방향 점 지정:',
 				},
 				on: {
 					DRAW: {
diff --git a/B07_DesignDetail/openwebcad/src/tools/select-tool.ts b/B07_DesignDetail/openwebcad/src/tools/select-tool.ts
index 55a339266..62aa98e41 100644
--- a/B07_DesignDetail/openwebcad/src/tools/select-tool.ts
+++ b/B07_DesignDetail/openwebcad/src/tools/select-tool.ts
@@ -57,7 +57,7 @@ export const selectToolStateMachine = createMachine(
 			[SelectState.WAITING_FOR_FIRST_SELECT_POINT]: {
 				description: 'Select a line or select the first point of a selection rectangle',
 				meta: {
-					instructions: 'Select a line or start drawing a selection rectangle',
+					instructions: '객체 선택 또는 선택 상자 시작',
 				},
 				on: {
 					MOUSE_CLICK: {
@@ -79,7 +79,7 @@ export const selectToolStateMachine = createMachine(
 			[SelectState.CHECK_SELECTION]: {
 				description: 'Checking to select one line or start drawing a selection rectangle',
 				meta: {
-					instructions: 'Select one line or start drawing a selection rectangle',
+					instructions: '객체 하나 선택 또는 선택 상자 시작',
 				},
 				always: [
 					{
@@ -95,9 +95,9 @@ export const selectToolStateMachine = createMachine(
 				],
 			},
 			[SelectState.WAITING_FOR_SECOND_SELECT_POINT]: {
-				description: 'Select the second point of a selection rectangle',
+				description: '선택 상자 맞은 모서리 지정',
 				meta: {
-					instructions: 'Select the second point of a selection rectangle',
+					instructions: '선택 상자 맞은 모서리 지정',
 				},
 				on: {
 					DRAW: {
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Hopyo.css b/M02_MasterTemplete/M02_MasterTemplete_Hopyo.css
index 134403225..8e771bad7 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Hopyo.css
+++ b/M02_MasterTemplete/M02_MasterTemplete_Hopyo.css
@@ -227,3 +227,24 @@
 .m02-hopyo-sheet__result:empty {
   display: none;
 }
+
+/* 고르기 창 근거(330) — 후보 꼬리표 · 엑셀 근거 줄 */
+.m02-hopyo__basis {
+  margin-left: var(--spacing-8);
+  padding: 0 var(--spacing-4);
+  border: 1px solid var(--color-border);
+  border-radius: var(--radius-sm);
+  color: var(--color-text-secondary);
+  font-size: var(--text-caption);
+  white-space: nowrap;
+}
+
+.m02-hopyo__basis.is-ok {
+  border-color: var(--color-success);
+  color: var(--color-success);
+}
+
+.m02-hopyo__source {
+  padding-bottom: var(--spacing-8);
+  border-bottom: 1px solid var(--color-border);
+}
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Hopyo_Api.ts b/M02_MasterTemplete/M02_MasterTemplete_Hopyo_Api.ts
index c4ef47641..12312fba2 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Hopyo_Api.ts
+++ b/M02_MasterTemplete/M02_MasterTemplete_Hopyo_Api.ts
@@ -59,6 +59,22 @@ export interface HopyoView extends HopyoFile {
   맞춤: [number, number];
 }
 
+/** 후보가 단가산출 근거와 맞는 것(330-2) — 맞은 조항 글 · 겹친 직종 · 단위 같음 · 점수 · 까닭 꼬리표 */
+export interface HopyoBasisHit {
+  조항: string[];
+  직종: string[];
+  단위: boolean;
+  점수: number;
+  까닭: string;
+}
+
+/** 단산 줄 근거(330-1) — 단가산출 블록의 출처([책, 번호]) · 직종 · 엑셀 행 [시작, 끝] */
+export interface HopyoLineBasis {
+  출처: [string, string][];
+  직종: string[];
+  행: [number, number];
+}
+
 /** 맞춤 대상 — 로직 · 자재 · 다른 호표 */
 export interface HopyoTarget {
   로직?: string;
@@ -68,6 +84,8 @@ export interface HopyoTarget {
   규격?: string;
   단위?: string | null;
   점수?: number;
+  /** 근거 맞춤(330 · 옛 파일 · 근거 없는 줄은 없음) */
+  근거?: HopyoBasisHit;
 }
 
 export interface HopyoMatch {
@@ -92,6 +110,8 @@ export interface HopyoLine {
   금액: Money;
   비고: string;
   맞춤: HopyoMatch;
+  /** 단가산출 근거(330 · 「단산N참조」 줄만) */
+  근거?: HopyoLineBasis;
 }
 
 export interface HopyoOne extends HopyoFile {
diff --git a/M02_MasterTemplete/M02_MasterTemplete_Hopyo_View.ts b/M02_MasterTemplete/M02_MasterTemplete_Hopyo_View.ts
index 3aa5fe2c8..63a5eef75 100644
--- a/M02_MasterTemplete/M02_MasterTemplete_Hopyo_View.ts
+++ b/M02_MasterTemplete/M02_MasterTemplete_Hopyo_View.ts
@@ -3,7 +3,8 @@
  * 일위대가 실무자료 본 화면(PLAN 324-4) — 파일 하나: 파일 · 시트 · 호표 수 · 검산 · 맞춤 n/m · 호표 표 + 찾기 ·
  * [지우기] / 호표 하나: 줄 표(갈래 · 품명 · 규격 · 수량 · 단위 · 엑셀 단가 · 맞춤 · 대상 · 입력값 · 환산 ·
  * [고르기] [확정] [빼기]) · [같음 모두 확정] · 빠진 줄 · [사전조합 만들기] → 값 비교 · 다시 씀이면 [새로 만들기] ·
- * [엑셀로 보기] · [엑셀에서 보기](329 엑셀 보기 창 · 늦게 불러옴 · 호표 화면은 그 호표 고른 채).
+ * [엑셀로 보기] · [엑셀에서 보기](329 엑셀 보기 창 · 늦게 불러옴 · 호표 화면은 그 호표 고른 채) ·
+ * 고르기 창 후보 근거 꼬리표 · 엑셀 근거 줄 + [엑셀에서 보기](단가산출 그 행) · [근거 맞음 모두 확정](330).
  * 맞춤 · 만들기는 서버(`M02_Hopyo_Match` · `M02_Hopyo_Build`) · 쓰기 단추는 층 쓰기 권한만.
  * ========================================================================== */
 
@@ -17,9 +18,11 @@ import {
   readHopyo,
   readHopyoOne,
   saveHopyoMemory,
+  type HopyoBasisHit,
   type HopyoBuilt,
   type HopyoGuess,
   type HopyoLine,
+  type HopyoLineBasis,
   type HopyoMemory,
   type HopyoOne,
   type HopyoScope,
@@ -114,6 +117,42 @@ export function memoryOf(
   return null;
 }
 
+/** 근거 맞음 — 조항 · 직종 · 단위 모두 맞음(330 [근거 맞음 모두 확정]) */
+export const basisOk = (b: HopyoBasisHit | undefined): boolean =>
+  !!b && b.조항.length > 0 && b.직종.length > 0 && b.단위;
+
+/** 후보 근거 꼬리표 — 「조항 건설 공통 3-2-1 · 직종 특별인부 · 단위 같음」 · 근거 없으면 "" */
+export const basisTag = (b: HopyoBasisHit | undefined): string =>
+  b
+    ? [
+        b.조항.length ? `조항 ${b.조항.join(", ")}` : "",
+        b.직종.length ? `직종 ${b.직종.join(", ")}` : "",
+        b.단위 ? "단위 같음" : "",
+      ]
+        .filter(Boolean)
+        .join(" · ")
+    : "";
+
+/** 엑셀 근거 줄 — 「출처 건설표준품셈 3-2-1 · 직종 특별인부 · 단가산출 93–101행」 · 없으면 "" */
+export const sourceText = (b: HopyoLineBasis | undefined): string =>
+  b
+    ? [
+        b.출처.length ? `출처 ${b.출처.map((x) => x.join(" ").trim()).join(", ")}` : "",
+        b.직종.length ? `직종 ${b.직종.join(", ")}` : "",
+        `단가산출 ${b.행[0] === b.행[1] ? b.행[0] : `${b.행[0]}–${b.행[1]}`}행`,
+      ]
+        .filter(Boolean)
+        .join(" · ")
+    : "";
+
+/** [근거 맞음 모두 확정] 대상 — 「후보」 줄의 지금 대상이 근거 맞으면 그것 · 아니면 근거 맞는 첫 후보 · 없으면 null */
+export function basisPick(line: HopyoLine): HopyoTarget | null {
+  const m = line.맞춤;
+  if (m.상태 !== "후보") return null;
+  if (m.대상 && basisOk(m.대상.근거)) return m.대상;
+  return (m.후보 ?? []).find((c) => basisOk(c.근거)) ?? null;
+}
+
 export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement {
   const view = el("div", { className: "m02-hopyo", attrs: { "data-hopyo-view": key } });
   let nav = 0; // 늦게 온 응답 버림
@@ -236,9 +275,19 @@ export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement
       const all = createButton({ label: `같음 모두 확정 (${same.length})`, size: "sm" });
       all.disabled = !same.length;
       all.addEventListener("click", () => void confirmAll(no, same));
+      tools.push(all);
+      // 근거(330) — 옛 파일 · 근거 없는 호표면 단추 없음
+      if (h.줄.some((x) => x.근거 || x.맞춤.후보?.some((c) => c.근거))) {
+        const fit = h.줄.filter((x) => basisPick(x));
+        const ok = createButton({ label: `근거 맞음 모두 확정 (${fit.length})`, size: "sm" });
+        ok.title = "조항 · 직종 · 단위가 모두 맞는 후보만";
+        ok.disabled = !fit.length;
+        ok.addEventListener("click", () => void confirmBasis(no, fit));
+        tools.push(ok);
+      }
       const make = createButton({ label: "사전조합 만들기", variant: "filled", size: "sm" });
       make.addEventListener("click", () => void build(no, false));
-      tools.push(all, make);
+      tools.push(make);
     }
     const missing = h.줄.filter((x) => !x.맞춤.들어감);
     view.replaceChildren(
@@ -330,7 +379,7 @@ export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement
           variant: "ghost",
           size: "sm",
           onClick: () =>
-            choose(line, (t) =>
+            choose(line, got.파일, (t) =>
               guessHopyo(opt.scope, key, got.호표.번, line.차례, t).then(
                 (g) => (picked.set(line.차례, g), repaint()),
                 fail,
@@ -378,8 +427,8 @@ export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement
     });
   }
 
-  /** 대상 고르기 — 후보 5 + 다른 로직 · 자재 찾기 */
-  function choose(line: HopyoLine, done: (t: HopyoTarget) => void): void {
+  /** 대상 고르기 — 엑셀 근거 줄 · 후보 5(근거 꼬리표) + 다른 로직 · 자재 찾기 */
+  function choose(line: HopyoLine, 파일: string, done: (t: HopyoTarget) => void): void {
     const material = MATERIAL.has(line.갈래);
     openModal({
       title: `고르기 — ${line.이름} ${line.규격}`.trim(),
@@ -390,14 +439,48 @@ export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement
           close();
           done(t);
         };
-        const list = (line.맞춤.후보 ?? []).map((c) =>
-          createButton({
+        const list = (line.맞춤.후보 ?? []).map((c) => {
+          const button = createButton({
             label: `${targetText(c)} · ${c.로직 ?? c.자재 ?? ""}`,
             variant: "ghost",
             size: "sm",
             onClick: () => pick(c),
-          }),
-        );
+          });
+          const tag = basisTag(c.근거);
+          if (tag && c.근거)
+            button.append(
+              el("span", {
+                className: `m02-hopyo__basis${basisOk(c.근거) ? " is-ok" : ""}`,
+                text: tag,
+                attrs: { title: `${c.근거.까닭} · 점수 ${c.근거.점수}` },
+              }),
+            );
+          return button;
+        });
+        const basis = line.근거;
+        const source = basis
+          ? [
+              el("div", {
+                className: "m02-hopyo__bar m02-hopyo__source",
+                children: [
+                  note(`엑셀 근거 — ${sourceText(basis)}`),
+                  createButton({
+                    label: "엑셀에서 보기",
+                    variant: "ghost",
+                    size: "sm",
+                    onClick: () =>
+                      openSheet({
+                        scope: opt.scope,
+                        key,
+                        파일,
+                        canWrite: opt.canWrite,
+                        단산행: basis.행,
+                      }),
+                  }),
+                ],
+              }),
+            ]
+          : [];
         const more = createButton({
           label: material ? "다른 자재 찾기…" : "다른 로직 찾기…",
           size: "sm",
@@ -408,6 +491,7 @@ export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement
           },
         });
         body.append(
+          ...source,
           el("p", { className: "m02-hopyo__note", text: list.length ? "후보" : "가까운 것 없음" }),
           el("div", { className: "m02-hopyo__cands", children: list }),
           more,
@@ -434,6 +518,24 @@ export function buildHopyoView(key: string, opt: HopyoViewOptions): HTMLElement
     await remember(no, body);
   }
 
+  /** 근거 맞는 후보로 확정 — 지금 대상이 아니면 입력값 · 환산을 서버에서 다시 읽음 */
+  async function confirmBasis(no: number, lines: HopyoLine[]): Promise<void> {
+    const body: Record<string, HopyoMemory> = {};
+    for (const x of lines) {
+      const c = basisPick(x);
+      const m = x.맞춤;
+      if (!c) continue;
+      const g =
+        c === m.대상
+          ? { 대상: c, 입력값: m.입력값, 환산: m.환산 }
+          : await guessHopyo(opt.scope, key, no, x.차례, c).catch(() => null);
+      const one = g && memoryOf(g.대상, g.입력값, g.환산?.배 ?? null);
+      if (one) body[m.열쇠] = one;
+    }
+    if (!Object.keys(body).length) return showToast("확정할 줄 없음 — 환산을 못 읽음", "warning");
+    await remember(no, body);
+  }
+
   async function build(no: number, fresh: boolean): Promise<void> {
     try {
       const from = { 층: opt.scope.layer, 주인: opt.scope.owner, 키: key, 번: no };
diff --git a/resources/tester/cad/keyboard-chain.test.ts b/resources/tester/cad/keyboard-chain.test.ts
index af5d1a5d6..a10e808fc 100644
--- a/resources/tester/cad/keyboard-chain.test.ts
+++ b/resources/tester/cad/keyboard-chain.test.ts
@@ -13,9 +13,11 @@ vi.mock("react-toastify", () => ({
 import { toast } from "react-toastify";
 import { InputController } from "../../../B07_DesignDetail/openwebcad/src/inputController/input-controller";
 import { getAngleLock } from "../../../B07_DesignDetail/openwebcad/src/inputController/input-angle-lock";
+import { getSnapOverride } from "../../../B07_DesignDetail/openwebcad/src/inputController/input-snap-override";
 import {
   getActiveToolActor,
   getEntities,
+  getLastStateInstructions,
   setEntities,
   setSelectedEntityIds,
 } from "../../../B07_DesignDetail/openwebcad/src/state";
@@ -197,3 +199,83 @@ describe("331-2 이동 · 복사 · 회전 키보드 값", () => {
     expect(toast.error).not.toHaveBeenCalled();
   });
 });
+
+describe("331-3 선 중 C · U · 한 번 스냅 · 한글 안내", () => {
+  const drawOpen = () => {
+    type(controller, "l");
+    type(controller, "0,0");
+    type(controller, "10,0");
+    type(controller, "10,10");
+  };
+
+  it("C = 첫 점으로 닫고 끝 · 안내 「[닫기(C)/명령취소(U)]」", () => {
+    drawOpen();
+    expect(getLastStateInstructions()).toBe("다음 점 지정 또는 [닫기(C)/명령취소(U)]:");
+    type(controller, "c");
+    const drawn = lines();
+    expect(drawn).toHaveLength(3);
+    expectXy(drawn[2].start, 10, 10);
+    expectXy(drawn[2].end, 0, 0);
+    expect(getActiveToolActor()?.getSnapshot()?.value).toBe("WAITING_FOR_START_POINT");
+    expect(getLastStateInstructions()).toBe("첫 점 지정 (x,y):");
+  });
+
+  it("C 는 둘째 선부터 — 한 구간이면 무시", () => {
+    type(controller, "l");
+    type(controller, "0,0");
+    type(controller, "10,0");
+    type(controller, "c");
+    expect(lines()).toHaveLength(1);
+    expect(getActiveToolActor()?.getSnapshot()?.value).toBe("WAITING_FOR_END_POINT");
+  });
+
+  it("U = 마지막 한 구간만 취소 · 그 시작점에서 이어 그림", () => {
+    drawOpen();
+    type(controller, "u");
+    expect(lines()).toHaveLength(1);
+    type(controller, "20,0");
+    const drawn = lines();
+    expect(drawn).toHaveLength(2);
+    expectXy(drawn[1].start, 10, 0);
+    expectXy(drawn[1].end, 20, 0);
+  });
+
+  it("선 중 다른 명령 이름은 그대로 명령", () => {
+    drawOpen();
+    type(controller, "circle");
+    expect(getActiveToolActor()?.getSnapshot()?.context.type).toBe("CIRCLE");
+  });
+
+  it("END 한 번 — 둘레 안 끝점으로 · 한 점 뒤 풂", () => {
+    type(controller, "l");
+    type(controller, "0,0");
+    type(controller, "100,0");
+    key(controller, "Escape");
+    type(controller, "end");
+    expect(getSnapOverride()).toBe("END");
+    clickAt(controller, 80, 20); // 끝점 (100, 0) 에서 28 — 일반 스냅(15)은 못 닿음
+    expect(getSnapOverride()).toBeNull();
+    type(controller, "@0,10");
+    const drawn = lines();
+    expect(drawn).toHaveLength(2);
+    expectXy(drawn[1].start, 100, 0);
+    expectXy(drawn[1].end, 100, 10);
+  });
+
+  it("END 둘레에 끝점 없으면 클릭 버림 · Esc 로 풂", () => {
+    type(controller, "l");
+    type(controller, "end");
+    clickAt(controller, 500, 500);
+    expect(getActiveToolActor()?.getSnapshot()?.value).toBe("WAITING_FOR_START_POINT");
+    expect(getSnapOverride()).toBe("END");
+    key(controller, "Escape");
+    expect(getSnapOverride()).toBeNull();
+  });
+
+  it("점 단계가 아니면 END 는 스냅 아님", () => {
+    key(controller, "Escape");
+    key(controller, "Escape");
+    type(controller, "end");
+    expect(getSnapOverride()).toBeNull();
+  });
+});
diff --git a/resources/tester/helper_m02_hopyo_pick.cjs b/resources/tester/helper_m02_hopyo_pick.cjs
index 1a389f69f..78c8b60a9 100644
--- a/resources/tester/helper_m02_hopyo_pick.cjs
+++ b/resources/tester/helper_m02_hopyo_pick.cjs
@@ -88,6 +88,34 @@ function loadTs(file) {
         view.builtWord({ 다시씀: true }, true),
       ],
     },
+    basis: (() => {
+      const hit = {
+        조항: ["건설 공통 3-2-1"],
+        직종: ["특별인부"],
+        단위: true,
+        점수: 1.65,
+        까닭: "조항",
+      };
+      const half = { ...hit, 직종: [] };
+      const line = (상태, 대상, 후보) => ({ 맞춤: { 상태, 대상, 후보 } });
+      const a = { 로직: "GF000101", 근거: half };
+      const b = { 로직: "GC000083", 근거: hit };
+      return {
+        ok: [hit, half, { ...hit, 단위: false }, undefined].map(view.basisOk),
+        tag: [hit, half, undefined].map(view.basisTag),
+        source: [
+          view.sourceText({ 출처: [["건설표준품셈", "3-2-1"]], 직종: ["특별인부"], 행: [93, 101] }),
+          view.sourceText({ 출처: [], 직종: [], 행: [7, 7] }),
+          view.sourceText(undefined),
+        ],
+        pick: [
+          line("후보", a, [a, b]),
+          line("후보", b, [b]),
+          line("같음", b, [b]),
+          line("후보", a, [a]),
+        ].map((x) => view.basisPick(x)?.로직 ?? null),
+      };
+    })(),
     sheet: {
       at: [19, 20, 22, 24, 25, 30, 31].map((row) => sheet.hopyoAtRow(spans, row)),
       span: sheet.spanText([20, 24], sheet.lastColumn({ 칸: { A1: {}, N24: {} }, 열: { O: {} } })),
diff --git a/resources/tester/test_m02_hopyo_screen.py b/resources/tester/test_m02_hopyo_screen.py
index 804e09399..c844f2d7d 100644
--- a/resources/tester/test_m02_hopyo_screen.py
+++ b/resources/tester/test_m02_hopyo_screen.py
@@ -3,6 +3,7 @@
 - 고르기 창 덧줄(Node · fetch 대역): 이 층 · 위 층 호표 줄(맞춤 n/m) · 종류 고르기 ·
   고르면 문서 층에 만들기 길 → `lib.pick` 참조 줄(별칭 = 호표 품명) · 프로젝트 층엔 없음 ·
   본 화면 글 도우미
+- 고르기 창 근거(330-3): 꼬리표 · 엑셀 근거 줄 · [근거 맞음 모두 확정] 대상
 - 엑셀 보기 창(329): 행 → 호표 · 호표 영역 A1 · 격자 길 · 여는 자리 넷 · 늦게 불러옴
 - 소스: 좌측 판 자리(사전조합 아래 · 구조물 조합 층 · 쓰기 권한 없으면 올리기 꺼짐 ·
   숨은 file 입력) · Labor_Detail 줄 수 그대로 · 새 파일 이름 · 700 줄 · 색 = 공용 토큰
@@ -188,3 +189,23 @@ def test_엑셀_보기_창_여는_자리와_늦게_불러옴():
         r'^import \{[^}]*\} from "\.\./A00_Common/spreadsheet/spreadsheet"', sheet, re.M
     )
     assert "readOnly: true" in sheet and "wide: true" in sheet
+
+
+def test_고르기_창_근거_꼬리표와_근거_맞음():
+    basis = _run()["basis"]
+    assert basis["ok"] == [True, False, False, False]  # 조항 · 직종 · 단위 모두
+    assert basis["tag"] == [
+        "조항 건설 공통 3-2-1 · 직종 특별인부 · 단위 같음",
+        "조항 건설 공통 3-2-1 · 단위 같음",
+        "",
+    ]
+    assert basis["source"] == [
+        "출처 건설표준품셈 3-2-1 · 직종 특별인부 · 단가산출 93–101행",
+        "단가산출 7행",
+        "",
+    ]
+    # 지금 대상이 근거 안 맞으면 근거 맞는 후보 · 「후보」 줄만 · 근거 맞는 것 없으면 없음
+    assert basis["pick"] == ["GC000083", "GC000083", None, None]
+    view = _text("M02_MasterTemplete_Hopyo_View.ts")
+    assert "단산행: basis.행" in view and "근거 맞음 모두 확정" in view
+    assert "x.근거 || x.맞춤.후보?.some((c) => c.근거)" in view  # 옛 파일 = 단추 없음