'
- )
- ]
- for act in ("add", "remove", "close"):
- assert f'data-act="{act}"' in head
- assert head.index("임시 횡단") < head.index("b05-crossmodal__actions")
- css = _read("B05_Profile", "B05_Profile_UI_Profile_CrossModal.css")
- actions = css[css.index(".b05-crossmodal__actions {") :]
- assert "margin-left: auto;" in actions[: actions.index("}")]
-
-
-def test_제목_줄_끌기_화면_안() -> None:
- modal = _read("B05_Profile", "B05_Profile_UI_Profile_CrossModal.ts")
- assert 'bindHeadDrag(root, $(".b05-crossmodal__head"))' in modal
- drag = modal[modal.index("function bindHeadDrag(") : modal.index("interface CrossModal {")]
- assert '.closest("button")' in drag # 단추 누름은 단추 몫
- assert "innerWidth" in drag and "innerHeight" in drag # 화면 밖 안 나감
- assert "root.parentElement!.getBoundingClientRect()" in drag # 종단 칸 안
- assert "refit();" in modal # 다시 열 때 가둠
-
-
-def test_500_2_측점선_띠_안_임시_횡단_먼저() -> None:
- modal = _read("B05_Profile", "B05_Profile_UI_Profile_CrossModal.ts")
- # 단추 = other 먼저 · 추가 측점선 = plusM · 그 밖 측점선 = station(띠 안이면 임시 횡단)
- flat = " ".join(modal.split())
- assert 'target.closest("button") ? "other" : marker ? "station" : null' in flat
- logic = _read("B05_Profile", "logic", "B05_Profile_Profile_CrossPick.ts")
- assert '"station"' in logic and 'input.hit === "other"' in logic
- # 누름 = 잡는 단계에서 띠 안 측점선의 자기 고름을 막고 임시 횡단을 엶
- render = _read("B05_Profile", "B05_Profile_UI_Profile_Render.ts")
- start = render.index("// 잡는 단계(capture)")
- click = render[start : render.index("const derived = deriveProfile", start)]
- assert "event.stopPropagation()" in click and "openCrossModal(" in click
- assert " ".join(click.split()).endswith("}, true, );")
diff --git a/resources/tester/test_505_3_cross_card_text.py b/resources/tester/test_505_3_cross_card_text.py
deleted file mode 100644
index a734832fb..000000000
--- a/resources/tester/test_505_3_cross_card_text.py
+++ /dev/null
@@ -1,86 +0,0 @@
-"""505-3 B05 그림 · 글 — 임시 횡단 창 = B06 카드(형상 얹은 단면) · 빈칸 칩 그래프 오른쪽 위 · 곡선 판 가둠 ·
-지반선 · 계획선 누름 통과 · STALE 글 · 창 단추 공용 꼴.
-
-./venv/Scripts/python.exe -m pytest resources/tester/test_505_3_cross_card_text.py -q
-"""
-
-from __future__ import annotations
-
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-
-
-def _read(*parts: str) -> str:
- return ROOT.joinpath(*parts).read_text(encoding="utf-8")
-
-
-def test_측점_뜨기는_형상_얹은_단면도_돌려줌() -> None:
- probe = _read("A00_Common", "design", "design_pipeline_probe.ts")
- assert "Promise<{ preview: CrossPreviewResponse; section: CrossSection } | null>" in probe
- assert "const section = stationSection(station, cross, {}, intervalM);" in probe
- assert "attachStatus([section], status);" in probe
- detail = _read("B05_Profile", "logic", "B05_Profile_Pipeline_Detail.ts")
- assert "export function attachStatus(sections: CrossSection[], status: ShapeStatus)" in detail
-
-
-def test_임시_횡단_창은_B06_카드() -> None:
- modal = _read("B05_Profile", "B05_Profile_UI_Profile_CrossModal.ts")
- assert "crossSourceOf(" in modal and "routeCrossCard(source," in modal
- assert "now ? [now.preview] : await previewStructureSections(projectId(), [m])" in modal
- # 서버 미리 뜬 것(분석 지형 다름)만 선 그림
- assert "buildCrossSvg(preview, width, height)" in modal
- assert 'class="ui-button"' not in modal
- assert modal.count('class="ui-btn ui-btn--ghost ui-btn--sm" data-act=') == 3
- css = _read("B05_Profile", "B05_Profile_UI_Profile_CrossModal.css")
- assert ".b05-crossmodal__box > .b06-cross-card {" in css
-
-
-def test_판_재료_한_벌() -> None:
- card = _read("B05_Profile", "B05_Profile_UI_RouteEdit_Cross_Card.ts")
- assert (
- "return crossSourceOf(projectId, found, sections, detail.longitudinal.design_profiles, pane);"
- in card
- )
- assert card.count("export function crossSourceOf(") == 1
-
-
-def test_빈칸_칩은_머리_걷기_전에_꺼냄() -> None:
- card = _read("B05_Profile", "B05_Profile_UI_RouteEdit_Cross_Card.ts")
- chips = card.index('":scope > header .b06-cross-card__warning"')
- remove = card.index(':scope > header, :scope > footer, .b06-cross-card__zoom"')
- assert chips < remove
- assert 'box.className = "b05-cross-chips";' in card
- css = _read("B05_Profile", "B05_Profile_UI_Style_RouteEdit.css")
- rule = css[css.index(".b05-cross-chips {") :]
- assert "top: 4px;" in rule[:200] and "right: 4px;" in rule[:200]
- assert ".b06-cross-card:has(> .b05-cross-chips) {\n position: relative;" in css
-
-
-def test_곡선_판_가둠_도구줄_횡단판_종단판() -> None:
- bar = _read("B05_Profile", "B05_Profile_UI_RouteEdit_CurveBar.ts")
- for selector in (
- ".b05-routeedit__tools",
- ".b05-routeedit__side-wrap",
- ".b05-route-profile",
- ):
- assert f'box("{selector}")' in bar
- assert "top: Math.max(rect.top, tools?.bottom ?? rect.top) + 8," in bar
- assert "right: Math.min(rect.right, side?.left ?? rect.right) - 8," in bar
- assert "bottom: Math.min(rect.bottom, profile?.top ?? rect.bottom) - 8," in bar
-
-
-def test_지반선_계획선_누름_통과() -> None:
- css = _read("B06_Section", "B06_Section_UI_Style_Cross.css") + _read(
- "B06_Section", "B06_Section_UI_Style_Cross_Chart.css"
- )
- assert ".b06-chart__profile,\n.b06-chart__design-profile {\n pointer-events: none;" in css
-
-
-def test_STALE_글_앞_단계() -> None:
- locale = _read("ui_template", "ui_template_locale_common.ts")
- assert (
- 'WF_State_Stale: ["다시 확인 필요 (앞 단계 변경)", "Stale (an earlier step changed)"],'
- in locale
- )
- assert "하위 단계" not in locale
diff --git a/resources/tester/test_61_2_b08_structure_sheets.py b/resources/tester/test_61_2_b08_structure_sheets.py
deleted file mode 100644
index d390057d8..000000000
--- a/resources/tester/test_61_2_b08_structure_sheets.py
+++ /dev/null
@@ -1,47 +0,0 @@
-"""61-2 · 95-3 B08 구조물도 모달 — 집계표 행에서 열림 · 읽기만 · 집계표와 같은 조합 목록 · 안내 글 키."""
-
-import re
-from pathlib import Path
-
-DRAWING = Path("B08_Quantity/B08_Quantity_UI_Drawing.ts").read_text(encoding="utf-8")
-SUMMARY = Path("B08_Quantity/B08_Quantity_UI_Summary.ts").read_text(encoding="utf-8")
-PAGE = Path("B08_Quantity/B08_Quantity_UI_Page.ts").read_text(encoding="utf-8")
-LOCALE = Path("ui_template/ui_template_locale_b4.ts").read_text(encoding="utf-8")
-LOCALE_B2 = Path("ui_template/ui_template_locale_b2.ts").read_text(encoding="utf-8")
-
-
-def test_sheet_tab_gone_modal_wired():
- # 구조물도 탭 없음 · 집계표 행 누름이 모달을 늦게 불러 엶
- assert '"sheet"' not in PAGE and "renderStructureSheets" not in PAGE
- assert "B08_Quantity_Tab_StructureSheet" not in PAGE + LOCALE + LOCALE_B2
- assert "onRowClick" in SUMMARY and 'import("./B08_Quantity_UI_Drawing")' in SUMMARY
- assert "combosAt(things, station)" in SUMMARY
-
-
-def test_modal_own_class_and_cleanup():
- css = Path("B08_Quantity/B08_Quantity_UI_Drawing.css").read_text(encoding="utf-8")
- assert "wide: true" in DRAWING and "min(1320px" not in css # 공용 큰 창(156-4)
- assert "beforeClose" in DRAWING and "cards.destroy()" in DRAWING
- assert 'dialogClass: "b08-sheets"' in DRAWING
-
-
-def test_no_layer_write():
- # 층 쓰기 · 카드 안 저장 없음 — 고침은 [수정] → 사본 편집 화면만(163-3 · 사본 PUT)
- for word in ("saveTemplate", "write:", "method:", "sheetEdit", "onImport", "onClear"):
- assert word not in DRAWING, word
- assert "editable: () => true" in DRAWING
-
-
-def test_copy_only():
- # 143-1 — 연결된 사본만(그룹은 `{id}__{그룹}` 사본) · 없으면 「사본 없음」 · M02 층 폴백 없음
- assert (
- "request.linked[combo.copyId]" in DRAWING
- and "sourceOf(request.projectId, copy.폴더)" in DRAWING
- )
- assert "readTemplate" not in DRAWING and "FromMaster" not in DRAWING
- assert "사본 없음" in LOCALE
-
-
-def test_locale_keys_exist():
- for key in set(re.findall(r'L\("([A-Za-z0-9_]+)"\)', DRAWING)):
- assert f"{key}:" in LOCALE or key.startswith(("B08_Quantity_Summary_", "Common_")), key
diff --git a/resources/tester/test_b05_corridor_structures_order.py b/resources/tester/test_b05_corridor_structures_order.py
deleted file mode 100644
index d0f3a1314..000000000
--- a/resources/tester/test_b05_corridor_structures_order.py
+++ /dev/null
@@ -1,34 +0,0 @@
-# -*- coding: utf-8 -*-
-"""3D 코리도 구조물 — 선언 차례(PLAN 24-6a).
-
-`ringsAt` 를 `const` 로 `pushSwept` 뒤에 선언했더니, 그 사이 기슭막이 단 반복이 `pushSwept` 를 곧바로 불러
-ReferenceError(TDZ)가 나 기슭막이 있는 구간의 3D 코리도가 통째로 안 만들어졌다(2026-08-28 e371c275 ~).
-쓰는 `const` 는 그것을 부르는 첫 호출보다 앞에 선언돼야 한다.
-"""
-
-from pathlib import Path
-
-SOURCE = (
- Path(__file__).resolve().parents[2] / "B05_Profile" / "B05_Profile_UI_Corridor_Structures.ts"
-)
-
-
-def test_ringsAt_는_pushSwept_와_첫_호출보다_앞에_선언():
- source = SOURCE.read_text(encoding="utf-8")
- rings = source.index("const ringsAt = ")
- swept = source.index("const pushSwept = (")
- first_call = (
- source.index("pushSwept(\n") if "pushSwept(\n" in source else source.index("pushSwept(")
- )
- assert rings < swept, "pushSwept 가 ringsAt 를 쓴다 — 뒤에 선언하면 TDZ"
- # 선언(`const pushSwept = (`) 뒤에 나오는 첫 호출 자리
- first_call = source.index("pushSwept(", swept + len("const pushSwept = ("))
- assert rings < first_call
-
-
-def test_스윕_쓰는_const_는_호출보다_앞():
- """pushSwept · pushPierced 가 쓰는 도우미 const 가 첫 호출(기슭막이 단 반복)보다 앞에 있다."""
- source = SOURCE.read_text(encoding="utf-8")
- first_revet_loop = source.index("for (const tier of revetLayout.tiers)")
- for name in ("const ringChainagesOf = ", "const ringsAt = ", "const pushSwept = ("):
- assert source.index(name) < first_revet_loop, name
diff --git a/resources/tester/test_b05_map_interval_spans.py b/resources/tester/test_b05_map_interval_spans.py
deleted file mode 100644
index d8cc48e40..000000000
--- a/resources/tester/test_b05_map_interval_spans.py
+++ /dev/null
@@ -1,69 +0,0 @@
-"""평면(지도)에 **구간형 구조물 띠**가 서는지 — 계획서 3-6 마지막 항목.
-
-왜 (2026-09-07 사용자 지시) — 산마루측구·도수로·옹벽처럼 **구간**으로 놓이는 시설이 종단에는
-띠로 보이는데 **평면에는 아무 표시가 없었다**. 계획서에는 「노선 위에 임의 구간을 얹는 부품이
-없어 새로 짜야 함」으로 남아 있었다.
-
-새로 짠 것은 작다 — 계획선 표본(`strengthSamples`)이 **1m 간격이라 배열 인덱스가 곧
-누가거리**여서, 구간 → 화면 선은 그 토막을 잘라 굵게 긋기만 하면 된다.
-
-이 시험이 지키는 것 — ① 띠를 그리는 부품이 있고 ② 배수유역도가 그것을 계획선 **위**,
-강도 색칠 **아래**에 그리며 ③ 띠 자료는 **종단과 같은 자료**(구조물 정본 + 타입 레지스트리)에서
-나오고 ④ 구간이 없는 점형 시설은 빠지는 것.
-"""
-
-from pathlib import Path
-
-PROJECT_ROOT = Path(__file__).resolve().parents[2]
-_B05 = PROJECT_ROOT / "B05_Profile"
-_SPANS = _B05 / "B05_Profile_UI_Drainage_Spans.ts"
-_RENDER = _B05 / "B05_Profile_UI_Drainage_Render.ts"
-_PANEL = _B05 / "B05_Profile_UI_Drainage_Panel.ts"
-# 종단 패널 본체는 종단도 한 벌로 옮겼다(계획서 24-2c) — 배수유역도는 오른쪽 판(side).
-_PROFILE = _B05.parent / "A00_Common" / "design" / "design_profile.ts"
-
-
-def test_띠를_그리는_부품이_있다():
- source = _SPANS.read_text(encoding="utf-8")
- assert "export function drawRouteSpans" in source
- # 인덱스 = 누가거리(m) 라는 전제가 코드에 남아 있어야 한다 — 표본 간격이 바뀌면 깨진다.
- assert "Math.floor(Math.min(span.startM, span.endM))" in source
-
-
-def test_범위_밖_구간도_안전하게_잘린다():
- """저장분에 노선보다 긴 구간이 남아 있어도 그리다 죽지 않아야 한다."""
- source = _SPANS.read_text(encoding="utf-8")
- assert "Math.max(0, Math.min(last," in source
- assert "Math.max(from + 1," in source, "시작=끝인 구간이 사라지지 않게 한 칸을 준다"
-
-
-def test_계획선_위_강도색칠_아래에_그린다():
- """쌓는 순서가 뒤집히면 띠가 계획선을 덮거나 마커에 가린다."""
- render = _RENDER.read_text(encoding="utf-8")
- assert "drawRouteSpans(context, scene.strengthSamples" in render
- # 호출 자리끼리 견준다 — 파일 머리의 import 는 순서 판정에 쓰면 안 된다.
- order_route = render.index("drawPreparedLayer(context, scene.routeLayer")
- order_span = render.index("drawRouteSpans(context")
- order_strength = render.index("drawStrengthLine(context")
- assert order_route < order_span < order_strength
-
-
-def test_종단과_같은_자료에서_뽑는다():
- """색은 레지스트리 표시색, 구간은 구조물 정본 — 새 정본을 만들지 않는다."""
- spans = _SPANS.read_text(encoding="utf-8")
- assert "export function routeSpansFromStructures" in spans
- assert 'item.placement !== "interval"' in spans, "구간형만 띠로 그린다"
- assert "type.style?.color" in spans, "색을 새로 정하지 않고 레지스트리 값을 쓴다"
- profile = _PROFILE.read_text(encoding="utf-8")
- assert "drainagePanel?.setIntervalSpans(routeSpansFromStructures(" in profile
-
-
-def test_목록이_바뀌면_다시_그린다():
- """구조물을 넣거나 빼면 띠도 따라와야 한다 — 안 그러면 옛 띠가 남는다."""
- profile = _PROFILE.read_text(encoding="utf-8")
- body = profile[profile.index("setStructures(next: StructureInstance[])") :][:400]
- assert "syncDrainageSpans()" in body
- types_body = profile[profile.index("setStructureTypes(types: StructureType[])") :][:300]
- assert "syncDrainageSpans()" in types_body
- panel = _PANEL.read_text(encoding="utf-8")
- assert "setIntervalSpans(spans) {" in panel and "scheduleDraw();" in panel
diff --git a/resources/tester/test_b05_routeedit_chrome_modal.py b/resources/tester/test_b05_routeedit_chrome_modal.py
deleted file mode 100644
index f6d2dff87..000000000
--- a/resources/tester/test_b05_routeedit_chrome_modal.py
+++ /dev/null
@@ -1,141 +0,0 @@
-"""계획노선 편집 겉틀 — 345-3 부터 모달이 아니라 종단 보기 가운데 위 본문(PLAN 127-1 의 공용 모달 조각은 걷음).
-
-· 덮개(`ui-modal__backdrop`) · 전체 화면 · 닫기 단추 없음 · 부모를 받아 붙음(`document.body` 아님)
-· [저장 전으로] 없음(352-2) · ↶ ↷ 는 기호 단추 · 머리 끝 `tools` 자리([3D])
-· 오른쪽 횡단 미리보기 = 접는 칸 · 재계산 대기 막은 화면 전체(fixed) · R 라벨은 칸 안 절대 위치
-· 바깥 누름 · Esc 로 안 닫힘(모달 아님)
-"""
-
-from __future__ import annotations
-
-import re
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-PAGE = ROOT / "B05_Profile"
-
-
-def _block(css: str, selector: str) -> str:
- found = re.search(rf"^{re.escape(selector)} \{{([^}}]*)\}}", css, re.M)
- assert found, selector
- return found.group(1)
-
-
-def _read(name: str) -> str:
- return (PAGE / name).read_text(encoding="utf-8")
-
-
-def test_겉틀은_본문_칸():
- chrome = _read("B05_Profile_UI_RouteEdit_Chrome.ts")
- assert "ui-modal" not in chrome
- assert "document.body.append" not in chrome
- assert "parent.append(overlay);" in chrome
- assert 'overlay.className = "b05-routeedit";' in chrome
- assert "b05-routeedit__close" not in chrome and 'data-slot="close"' not in chrome
- assert '"tools"' in chrome and "replaceWith(...tools)" in chrome
- # 346-3 — [노선 반영] 없앰(노선은 페이지 [저장]이 맨 앞에서 보냄) · 352-2 — [저장 전으로] 없앰
- assert 'data-act="apply"' not in chrome and 'data-act="cancel"' not in chrome
- assert ">저장 전으로" not in chrome and "노선 반영" not in chrome
- assert ">취소" not in chrome and ">확인" not in chrome
- # 352-2 — 되돌리기 · 다시하기 = 글 없이 기호 + aria-label · title(단축키)
- # 381-1 — 곧은 꼬리 + 갈고리 SVG(회전 반 바퀴 그림과 헷갈리지 않게)
- assert 'aria-label="되돌리기" disabled>${HISTORY_ICON.undo}' in chrome
- assert 'aria-label="다시하기" disabled>${HISTORY_ICON.redo}' in chrome
- assert ">↶" not in chrome and ">↷" not in chrome
- tools = _read("B05_Profile_UI_Profile_Tools.ts")
- assert "undo.innerHTML = HISTORY_ICON.undo;" in tools
- assert "redo.innerHTML = HISTORY_ICON.redo;" in tools
- assert 'title="되돌리기 (Ctrl+Z)"' in chrome and 'title="다시하기 (Ctrl+Y)"' in chrome
- # 시험 · 배선이 집는 자리는 남김
- assert "b05-routeedit__measure-close" in chrome
- # 382-1 — 오른쪽 횡단 판 = 패널 양식(손잡이 · 머리 · 폭 끌기 · 열림 · 폭 기억) · 칸 높이를 채움
- assert "createSidePanels({" in chrome and 'prefKey: "b05-routeedit-cross-v2"' in chrome
- assert "follow: false" in chrome and 'data-act="side-toggle"' not in chrome
-
-
-def test_393_1_횡단_판_기본_접힘_측점_고름은_판을_열지_않음():
- # 513-2 — 측점 고름 = 내용만 갱신 · 열림 · 닫힘은 손잡이(누름)만 · 자동 열림(393-1) 걷음
- chrome = _read("B05_Profile_UI_RouteEdit_Chrome.ts")
- assert "defaultOpen: null," in chrome and "innerWidth >= 1500" not in chrome
- cross = _read("B05_Profile_UI_RouteEdit_Cross.ts")
- assert "panels.open(" not in cross and "sidePanelsOf" not in cross
- side = (ROOT / "ui_template" / "ui_template_side_panels.ts").read_text(encoding="utf-8")
- assert "function open(id: string | null, remember = true): void {" in side
- assert "JSON.stringify({ open: kept, width })" in side
- assert "if (remember) {\n kept = next;\n save();" in side
-
-
-def test_CSS_덮개_걷음_대기막은_전체():
- css = _read("B05_Profile_UI_Style_RouteEdit.css")
- root = _block(css, ".b05-routeedit")
- assert "position: relative;" in root and "flex: 1 1 auto;" in root
- assert "z-index" not in root and "background" not in root
- busy = _block(css, ".b05-routeedit__busy")
- assert "position: fixed;" in busy and "z-index: var(--z-modal, 1000);" in busy
- label = _block(css, ".b05-routeedit__label")
- assert "position: absolute;" in label and "position: fixed" not in label
- # 382-1 — 자체 [횡단] 단추 · 접기 걷음(접기는 양식 손잡이)
- assert "b05-routeedit__side-toggle" not in css and "is-side-open" not in css
- assert "@media (width < 1500px)" not in css # 접기는 단추로(처음만 폭으로)
-
-
-def test_352_1_머리줄_상자_없음_도구는_뜬_단추_횡단은_우측_덮개():
- chrome = _read("B05_Profile_UI_RouteEdit_Chrome.ts")
- for gone in ("b05-routeedit__box", "b05-routeedit__head", "b05-routeedit__actions", "
"):
- assert gone not in chrome
- # 도구줄 = 3D 와 같은 떠 있는 유리 단추 · 구분선도 3D 것
- assert 'class="b05-route__view-controls b05-routeedit__tools"' in chrome
- assert "ui-btn--ghost" not in chrome.split(" chrome.index("b05-routeedit__busy")
- css = _read("B05_Profile_UI_Style_RouteEdit.css")
- for gone in (".b05-routeedit__box", ".b05-routeedit__head", ".b05-routeedit__actions"):
- assert gone not in css
- root = _block(css, ".b05-routeedit")
- assert "padding" not in root and "gap" not in root
- side = _block(css, ".b05-routeedit__side-wrap")
- assert "position: absolute;" in side and "right: var(--spacing-12);" in side
- z = int(re.search(r"z-index: (\d+);", side).group(1))
- assert z < 3 # 아래 종단 판(z 3)이 위
- style = _read("B05_Profile_UI_Style.css")
- assert "z-index: 3;" in _block(style, ".b05-route-profile")
- # 회전 단추 · 잰 값 창은 펴진 횡단 판을 비킴
- assert "right: var(--spacing-12);" in _block(css, ".b05-routeedit__spin") # 도구줄 줄 오른쪽
- assert "34px" in side # 횡단 판은 도구줄 줄 아래에서 시작
- assert "var(--b05-side-open)" in _block(css, ".b05-routeedit__measure")
- assert '"--b05-side-open"' in chrome # 판 폭(손잡이 포함)을 적음
- glass = _block(css, ".b05-routeedit__terrain")
- assert "backdrop-filter: blur(6px);" in glass and "background:" in glass
-
-
-def test_페이지_수명_닫기_없음():
- main = _read("B05_Profile_UI_RouteEdit.ts")
- assert "openModal" not in main and "Escape" not in main
- assert "openRouteEditModal" not in main
- assert "export async function mountRouteEditor(" in main
- assert 'window.addEventListener("resize"' not in main # 칸 크기는 ResizeObserver
- assert "new ResizeObserver(" in main
- assert "host.onDispose(dispose);" in main
- assert "historyControls.listen(host.visible());" in main
- assert "history?.reset()" not in main # 352-2 — [저장 전으로] 지움
- hist = _read("B05_Profile_UI_RouteEdit_History.ts")
- assert "reset" not in hist.split("export interface RouteEditHistory", 1)[1].split("}", 1)[0]
- assert len(main.splitlines()) <= 700
- label = _read("B05_Profile_UI_RouteEdit_Label.ts")
- assert "document.body.append" not in label and "container.append(root);" in label
- assert '"곡선 삭제" : "곡선 추가"' in label # 352-5 — 버튼 이름은 명사형
- assert "container: overlay," in main
- apply = _read("B05_Profile_UI_RouteEdit_Apply.ts")
- assert "close" not in apply.split("export function bindRouteApply", 1)[1]
-
-
-def test_393_5_접힌_손잡이는_지도_오른쪽_끝에_붙음():
- css = _read("B05_Profile_UI_Style_RouteEdit.css")
- flush = _block(css, ".b05-routeedit__side-wrap:has(.ui-side-panels.is-collapsed)")
- assert "right: 0;" in flush
- # 펼친 판은 그대로 띄움
- assert "right: var(--spacing-12);" in _block(css, ".b05-routeedit__side-wrap")
- side = (ROOT / "ui_template" / "ui_template_side_panels.ts").read_text(encoding="utf-8")
- assert 'root.classList.toggle("is-collapsed", now === null);' in side
diff --git a/resources/tester/test_design_page_single.py b/resources/tester/test_design_page_single.py
deleted file mode 100644
index 5b4f0e082..000000000
--- a/resources/tester/test_design_page_single.py
+++ /dev/null
@@ -1,129 +0,0 @@
-# -*- coding: utf-8 -*-
-"""한 페이지 뼈대(계획서 24-3a) · 겹친 알약(24-6b) 회귀검증.
-
-주소 둘(`#/b05-profile` · `#/b06-section`)이 같은 페이지(`A00_Common/design/design_page.ts`)를
-열고, 같은 페이지 안 이동은 다시 만들지 않고 보기만 바꾸는지, 떠날 때 3D(WebGL 문맥) ·
-종단도 · 횡단을 정리하는지, 숨긴 3D 는 그리기 루프를 멈추는지, 창에 건 키 듣기를 떼는지 본다.
-화면 수치(문맥 수 · 루프 · 같은 노드 · 전환 시간)는 ORCA 로 잰다 — 여기서는 길이 끊기지 않게 잠근다.
-"""
-
-import re
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parent.parent.parent
-
-
-def _read(relative: str) -> str:
- return (ROOT / relative).read_text(encoding="utf-8")
-
-
-def test_주소_둘이_같은_페이지():
- router = _read("A00_Common/router.ts")
- assert router.count('(await import("./design/design_page")).renderDesignPage') == 2
- assert "export function showWithinPage(" in router
- # 다른 페이지로 떠나면 정리 · 늦게 끝난 옛 렌더는 버림
- assert "mounted?.dispose();" in router
- assert "if (page && seq !== renderSeq) page.dispose();" in router
-
-
-def test_같은_페이지면_셸도_다시_안_그림():
- main = _read("A00_Common/main.ts")
- within = main.index("showWithinPage(currentRoute())")
- assert within < main.index("renderShell(appRoot")
- assert "if (within) return;" in main
-
-
-def test_보기_약속_가운데만():
- """끝 모습(24-3b) — 보기는 가운데 위 칸만 채우고 좌측 패널 · 단추 · 종단도는 한 벌을 쓴다."""
- page = _read("A00_Common/design/design_page.ts")
- assert "export interface DesignPageView" in page
- assert "mount?: (root" not in page # 보기가 틀을 통째로 그리던 중간 길은 걷음
- assert "mountCenter: (" in page and "shared: DesignPageShared" in page
- assert 'import("./design_view_profile")).mountProfileView' in page
- assert 'import("./design_view_cross")).mountCrossView' in page
- for hook in ("onShow:", "onHide:", "onDispose:"):
- assert hook in page
- # 보기는 처음 보일 때 한 번만 만든다 — 있으면 보이기만.
- assert "if (slot) {\n slot.show();" in page
-
-
-def test_페이지가_숨김_떠남을_건다():
- life = _read("B05_Profile/B05_Profile_UI_Page_Life.ts")
- assert "deps.viewer.setActive(false)" in life and "deps.viewer.dispose()" in life
- assert "bindProfileViewLife(host," in _read("A00_Common/design/design_view_profile.ts")
- cross = _read("A00_Common/design/design_view_cross.ts")
- assert "sectionView.dispose();" in cross[cross.index("host.onDispose(") :]
- # 종단도는 한 벌 — 보기가 숨어도 그대로 두고, 페이지를 떠날 때 한 번 정리한다.
- assert "shared.profile?.dispose();" in _read("A00_Common/design/design_page.ts")
-
-
-def test_3D_멈춤과_문맥_놓기():
- viewer = _read("B05_Profile/B05_Profile_UI_Viewer.ts")
- assert "setActive(active)" in viewer
- assert "renderer.forceContextLoss();" in viewer
- # 보관 지형은 다음 뷰어가 쓴다 — 떠날 때 버리지 않는다.
- assert "if (terrain !== cachedTerrain.object) disposeObject(terrain);" in viewer
- assert len(viewer.splitlines()) <= 700
-
-
-def test_창_키_듣기를_뗌():
- tools = _read("B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts")
- assert 'window.removeEventListener("keydown", onKeyDown);' in tools
- assert 'window.addEventListener("keydown", (event)' not in tools
- profile = _read("A00_Common/design/design_profile.ts")
- assert "setListening(false);" in profile # dispose
- pick = _read("B05_Profile/B05_Profile_UI_Viewer_Structure_Pick.ts")
- assert "setListening(on)" in pick
-
-
-def test_겹친_알약은_누른_것을_그대로():
- profile = _read("A00_Common/design/design_profile.ts")
- assert re.search(r"structureIdKeeping\(\s*stationId,\s*selectedStructureId", profile)
- # 판정은 `_Profile_Structures` 로 옮김 — 비정규 측점 짝 · 규칙 측점(B06 카드) 기준점(53-2)
- rule = _read("B05_Profile/B05_Profile_UI_Profile_Structures.ts")
- assert "stationIdAtStructure(selectedId, stations, structures, types) === stationId" in rule
- assert "Math.abs(structureAnchorM(selected) - at) < SAME_CHAINAGE_M" in rule
-
-
-def test_진행_단계_두_칸이_보기를_따라감():
- """종단설계 · 횡단설계 두 칸은 같은 페이지 — 누르면 주소만 바꿔 보기만 바뀐다(계획서 24-3b)."""
- page = _read("A00_Common/design/design_page.ts")
- assert "const VIEW_STEP: Record = { profile: 2, cross: 3 };" in page
- assert "layout?.setActiveStep(VIEW_STEP[view]);" in page
- assert "layout?.setTitle(" in page
- click = page[page.index("onStepClick: (stepIndex) => {") :][:260]
- assert "if (designViewOf(route)) navigateTo(route);" in click
- layout = _read("ui_template/ui_template_workflow_layout.ts")
- assert "setActiveStep: (stepIndex) =>" in layout and "setTitle: (title) =>" in layout
-
-
-def test_초기화_계획노선_편집은_다시_세움():
- """[초기화] · [노선 반영](옛 계획노선 편집 [확인]) = 새 초기값 — 옛 캐시를 다 버리고 페이지를 통째로 다시 읽는다(PLAN 77)."""
- reset = _read("A00_Common/design/design_reset.ts")
- assert (
- 'namesInBucket("draft")' in reset and "clearResults(projectId);" in reset
- ) # B08 · B09 초안 남김(418)
- assert "location.reload()" in reset
- view = _read("A00_Common/design/design_view_profile.ts")
- assert "location.reload()" not in view # [노선 반영]은 새로고침 대신 다시 세움(345-3)
- rebuild = view[view.index("const rebuildAfterReplan") :]
- rebuild = rebuild[: rebuild.index("};")]
- for step in (
- "clearRouteLatestCache(activeProjectId);",
- "invalidateSectionDetail(activeProjectId);",
- "remountRoute(currentRoute());",
- ):
- assert step in rebuild
- assert rebuild.index("invalidateSectionDetail") < rebuild.index("remountRoute(")
- assert "mountRouteEditor(mainContent, host, activeProjectId, rebuildAfterReplan," in view
- # 346-3 — [저장]이 노선을 보낸 뒤 결과 캐시를 비우고 편집기가 건 다시 세우기(rebuildAfterReplan)
- apply = _read("B05_Profile/B05_Profile_UI_RouteEdit_Apply.ts")
- assert "clearResults(projectId);" in apply and "rebuild: params.onApplied," in apply
-
-
-def test_종단_보기_확정은_횡단_보기를_숨긴_채_세움():
- page = _read("A00_Common/design/design_page.ts")
- assert "ensureView: (view) => (slots.get(view) ?? mountView(view, false)).ready," in page
- cross = _read("A00_Common/design/design_view_cross.ts")
- # 숨긴 채 섰으면 한 벌 폼은 종단 보기 몫 — 보일 때 싣는다.
- assert "if (host.visible()) void structuresPanel.load()" in cross
diff --git a/resources/tester/test_design_panel_dock_fixed.py b/resources/tester/test_design_panel_dock_fixed.py
deleted file mode 100644
index d507560c9..000000000
--- a/resources/tester/test_design_panel_dock_fixed.py
+++ /dev/null
@@ -1,38 +0,0 @@
-# -*- coding: utf-8 -*-
-"""B05 · B06 좌측 패널 아래 고정(계획서 44-3) — 단추 묶음이 패널 바닥에 붙고 위 칸만 스크롤.
-
-공용 쪼개기(`splitSidebarActions`)가 [스크롤 칸][아래 고정 단추] 로 나누는데, 한 페이지(design_page)는
-좌측 자리를 빈 채 틀에 넘겨 쪼개기가 지나가고, 보기 전환이 패널 클래스를 통째 덮어 `ui-sidebar-fill` 을
-지웠다. 세 자리가 다시 어긋나면 빨강. 화면 수치는 `ui_checks/44-3_좌측패널_하단고정.js`.
-"""
-
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-OVERLAY = ROOT / "ui_template" / "ui_template_overlay.ts"
-PANEL = ROOT / "A00_Common" / "design" / "design_panel.ts"
-SHARED = ROOT / "A00_Common" / "design" / "design_shared.ts"
-
-
-def read(path: Path) -> str:
- return path.read_text(encoding="utf-8")
-
-
-def test_split_is_exported_and_idempotent():
- src = read(OVERLAY)
- assert "export function splitSidebarActions(" in src
- assert 'if (body.classList.contains("ui-sidebar-split")) return;' in src
-
-
-def test_shared_panel_splits_after_attach():
- src = read(SHARED)
- attach = src.index("shared.left.append(panel.root);")
- assert "splitSidebarActions(body)" in src[attach : attach + 400]
-
-
-def test_panel_keeps_fill_class_and_scroll_host():
- src = read(PANEL)
- # 보기 전환이 클래스를 통째 덮으면 ui-sidebar-fill 이 지워져 단추 묶음이 바닥에서 뜬다.
- assert "root.className = next" not in src
- # 늦게 서는 칸은 스크롤 칸 안으로 — 패널 루트에 바로 끼우면 스크롤 밖에 남는다.
- assert ":scope > .ui-sidebar-scroll" in src
diff --git a/resources/tester/test_m01_side_fuel.py b/resources/tester/test_m01_side_fuel.py
deleted file mode 100644
index 15a8e8b7f..000000000
--- a/resources/tester/test_m01_side_fuel.py
+++ /dev/null
@@ -1,44 +0,0 @@
-"""38-2 왼쪽 패널 「유가 · 전력」 컨테이너 — 재료 다음 따로 · 재료 컨테이너에서는 뺌 · 서버 재료 그룹 그대로."""
-
-import json
-import re
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-SIDE = (ROOT / "M01_MasterData/M01_MasterData_UI_Side.ts").read_text(encoding="utf-8")
-
-
-def _array(name: str) -> list[str]:
- body = re.search(rf"const {name}(?:: \w+\[\])? = \[(.*?)\]", SIDE, re.S).group(1)
- return [x.strip().strip('"') for x in body.split(",") if x.strip()]
-
-
-def test_fuel_container_right_after_material():
- groups = _array("GROUPS")
- assert groups[groups.index("재료") + 1] == "FUEL_GROUP"
- assert 'const FUEL_GROUP = "유가 · 전력";' in SIDE
-
-
-def test_material_container_has_no_fuel():
- assert _array("MATERIAL_ORDER") == ["자재품목", "품셈재료"]
- assert "list.filter((f) => !isFuel(f))" in SIDE
-
-
-def test_fuel_container_reads_server_material_group():
- # 서버로는 재료 그룹을 받아 유가전력 파일만 · 첫 받기에서 따로 부르지 않음
- assert 'if (group === FUEL_GROUP) return (await refresh("재료")).filter(isFuel);' in SIDE
- assert "GROUPS.filter((g) => g !== FUEL_GROUP).map(refresh)" in SIDE
- # 거름 저장 열쇠 그대로 — 전에 고른 구분이 이어짐
- assert "store: `m01.filter.재료.${FUEL}`" in SIDE
-
-
-def test_fuel_file_still_in_material_group():
- data = json.loads(
- (ROOT / "resources/master_data/재료_유가전력.json").read_text(encoding="utf-8")
- )
- assert data
- # 흐름도 넣을 값 판 · 단가산출 로직 요소 고르기는 서버 재료 그룹을 그대로 씀
- panel = (ROOT / "M02_MasterTemplete/DataFlow/M02_DF_InputPanel_Build.ts").read_text(
- encoding="utf-8"
- )
- assert '유가전력: { group: "재료", part: "유가전력" }' in panel
diff --git a/resources/tester/test_m02_area_panel.py b/resources/tester/test_m02_area_panel.py
deleted file mode 100644
index cccd2e3f7..000000000
--- a/resources/tester/test_m02_area_panel.py
+++ /dev/null
@@ -1,112 +0,0 @@
-"""면적산출 상세 오른쪽 일위대가 패널 · 칸 지정 모달(PLAN 39-4 D2 · D5 · D6) — 화면 조작은 ORCA.
-
-· 패널 = 그 열 일위대가 보기 갈래(`Labor_View`) · 조합 목록 · 찾기 · [이 열에 쓰기] · [조합 고치기] 없음
-· 줄 누름 = 칸 지정 모달 → 스프레드시트 `setLink`(면적 문서 `연결` 한 곳 · 알약과 같은 길)
-· 시트 칸 값 · 연결이 바뀌면 `setQty` 로 바로 곱함(서버 안 부름)
-"""
-
-from __future__ import annotations
-
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-M02 = ROOT / "M02_MasterTemplete"
-
-
-def _text(name: str) -> str:
- return (M02 / name).read_text(encoding="utf-8")
-
-
-def test_면적_길은_일위대가_패널():
- main = _text("M02_MasterTemplete_UI_Main.ts")
- body = main.split("async function mountSheet")[1].split("async function remount")[0]
- area = body.split('if (kind === "area") {')[1].split("\n }\n")[0]
- assert "apanel = buildAreaPanel({" in area and "host.append(apanel.root);" in area
- assert "picked: () => picked," in area and "pills: () => links.항목," in area
- assert (
- "apanel?.refresh();" in body
- and "onSelect: (s) => ((picked = s.칸), toDrawing.select(s))," in body
- )
- assert "buildComboBar" not in main # 조합 줄 · [조합 고치기] 지움
- assert body.index('if (at.layer === "project") return;') < body.index("buildAreaPanel")
- assert "apanel?.destroy();\n apanel = null;" in main # drop
-
-
-def test_패널_몸은_보기_갈래_줄_누름은_칸_지정():
- panel = _text("M02_MasterTemplete_AreaPanel.ts")
- assert "createLaborView(openLink)" in panel
- assert "void view.show(opts.layer, opts.column, quantities(opts.sheet()));" in panel
- assert "view.setQty(quantities(opts.sheet()), cellsOf(opts.sheet()))" in panel
- assert panel.index("void view.show(") < panel.index("refresh(); // 칸 주소")
- assert "openAreaLink({" in panel and "if (!row.pill) return showToast(TEXT.noPill" in panel
- for gone in ("fetchUsableCombos", "setColumnCombo", "branchCombo"):
- assert gone not in panel
-
-
-def test_칸_지정_모달은_setLink_만():
- link = _text("M02_MasterTemplete_AreaLink.ts")
- assert 'opts.sheet.setLink(opts.key, a1, opts.info, choice === "바꾸기")' in link
- assert (
- "linksAt(book, sheetId, a1, opts.key)" in link and "askShare(" in link
- ) # 칸 하나 알약 여럿
- assert "done(here)" in link and "done(address.input.value)" in link and "done(null)" in link
- assert "address.setError(TEXT.bad)" in link # 틀린 · 빈 주소는 모달 그대로
- assert "pick.disabled = link.disabled = address.input.disabled = opts.readOnly;" in link
- assert "saveTemplate" not in link # 저장은 [저장]
-
-
-def test_빈_칸은_수량_없음_서버와_같음():
- """39-8 ② — 빈 칸에 이은 알약 = 수량 없음(반영 「—」 · 「수량 빈 칸(A1)」) · 0 칸 = 0 · 값 칸 = 값."""
- from M02_MasterTemplete import M02_Labor_Doc as labor
-
- doc = {
- "시트": [
- {
- "id": "s1",
- "칸": {"A2": {"값": 0}, "A3": {"값": "1,250"}, "A4": {"값": "글"}},
- "연결": [
- {"키": k, "칸": c}
- for k, c in (("빈", "A1"), ("영", "A2"), ("값", "A3"), ("글", "A4"))
- ],
- }
- ]
- }
- assert {k: float(v) for k, v in labor.area_values(doc).items()} == {"영": 0, "값": 1250}
- panel = _text("M02_MasterTemplete_AreaPanel.ts")
- body = panel.split("function quantities")[1].split("\n}\n")[0]
- assert 'toNumber(cell?.식 !== undefined ? (v && "수" in v ? v.수 : null) : cell?.값)' in body
- assert 'String(raw).replace(/,/g, "").trim()' in panel and 'typeof raw === "boolean"' in panel
- sheet = (ROOT / "A00_Common" / "spreadsheet" / "spreadsheet.ts").read_text(encoding="utf-8")
- assert 'const empty = !cell || (cell.식 === undefined && (cell.값 ?? "") === "");' in sheet
- rows = _text("M02_MasterTemplete_Labor_Rows.ts")
- assert '${tc("Labor_Qty")} ${tc("In_QtyEmpty")}(${at})' in rows
- assert "if (!value) return `${link.칸} = ${TEXT.empty}`;" in _text(
- "M02_MasterTemplete_AreaLink.ts"
- )
-
-
-def test_카드_알약_취향은_계정_받은_뒤_올림():
- """39-8 ③ — 화면이 뜰 때 브라우저 옛 값이 계정 값을 덮지 않게 · 카드는 열 때마다 취향을 다시 읽음."""
- state = (ROOT / "A00_Common" / "b_page_state.ts").read_text(encoding="utf-8")
- push = state.split("function pushUiPrefs")[1].split("export function syncUiPrefs")[0]
- assert "void (prefsPull ?? Promise.resolve())" in push and "prefs: localPrefs()" in push
- assert "prefsPull = pullUiPrefs();" in state
- cards = _text("M02_MasterTemplete_ItemCards.ts")
- load = cards.split("async function load(")[1]
- assert 'paintPills(readStateRaw("m02-card-pills") === "true");' in load
-
-
-def test_엑셀_칸_고르기_모달_부품():
- """40-3 ① · 43-1 — 읽기만 시트(수량산출 모달 안에 바로 · `mountAreaSheet`) · 칸 누름 = 주소 ·
- 풀기 · 손 · 확인 · 닫기는 일위대가 수량산출 모달(`Labor_QtyModal`) · 저장 안 함."""
- pick = _text("M02_MasterTemplete_AreaCellPick.ts")
- assert 'export { linkAreaCell } from "../A00_Common/spreadsheet/spreadsheet_link_set";' in pick
- assert "export function mountAreaSheet(" in pick and "readOnly: true," in pick
- assert 'opts.onPick(choice === "바꾸기" ? { 칸: at, 바꾸기: true } : { 칸: at });' in pick
- qty = _text("M02_MasterTemplete_Labor_QtyModal.ts")
- assert "sheet = mountAreaSheet(host, {" in qty and 'pending = { kind: "unlink" };' in qty
- assert "엑셀에서 고르기" not in qty # 두 단계 모달 없앰(43-1)
- assert "linksAt(book, sheetId, at, opts.pill)" in pick and "askShare(" in pick
- assert "if ((e as MouseEvent).button === 0 && moved) void choose();" in pick
- assert "handle?.destroy();" in pick
- assert "saveTemplate" not in pick
diff --git a/resources/tester/test_m02_card_sheet_edit.py b/resources/tester/test_m02_card_sheet_edit.py
deleted file mode 100644
index 6a4abdaac..000000000
--- a/resources/tester/test_m02_card_sheet_edit.py
+++ /dev/null
@@ -1,109 +0,0 @@
-"""면적산출 · 재료산출 카드 미리보기 수정(PLAN 31-3) — 화면 조작은 ORCA.
-
-· 스프레드시트 `preview` = 도구 모음 · 오른쪽 클릭 메뉴 없음 · 수식 입력 줄 · 칸 고침
- (다른 화면 그대로)
-· 카드 = `sheetEdit` 가 있을 때만 고침(M02 구조물 조합) · 고르기 모달은 보기만 그대로
-· 알약 = 전체 편집기와 같은 부품 · 카드 [저장] = 같은 저장 길 · 저장 안 한 고침 물음
-"""
-
-from __future__ import annotations
-
-import re
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-M02 = ROOT / "M02_MasterTemplete"
-
-
-def _text(path: Path) -> str:
- return path.read_text(encoding="utf-8")
-
-
-def test_스프레드시트_미리보기_수정_옵션():
- src = _text(ROOT / "A00_Common" / "spreadsheet" / "spreadsheet.ts")
- assert "preview?: boolean;" in src
- assert "const bare = readOnly || !!opts.preview;" in src
- assert "bare ? null : mountToolbar(ctx)" in src
- # 미리보기 우클릭 = 「복사」 한 줄 — 메뉴 쪽이 ss--preview 로 가름
- assert "attachMenu(ctx)" in src and '" ss--preview"' in src
- menu = _text(ROOT / "A00_Common" / "spreadsheet" / "spreadsheet_menu.ts")
- assert 'classList.contains("ss--preview")' in menu and "copyOnlyItems(ctx)" in menu
- # 편집 · 수식 입력 줄은 readOnly 만 막음 — preview 는 고칠 수 있음
- assert "const readOnly = !!opts.readOnly;" in src
- assert re.search(r"for \(const node of \[toolbar\?\.root, ed\.bar, grid\.root", src)
-
-
-def test_카드는_sheetEdit_있을_때만_고침():
- cards = _text(M02 / "M02_MasterTemplete_ItemCards.ts")
- assert "sheetEdit?: SheetEditOptions;" in cards
- assert (
- "if (opts.sheetEdit?.can()) return await paintEditable(c, mine, createSpreadsheet);"
- in cards
- )
- body = cards.split("const paintEditable")[1].split("const paintSheet")[0]
- assert "preview: true," in body and "links," in body
- assert "c.host.append(extra.below)" in body # 재료산출 = 자재 조합 판
- # 보기만 길 그대로(고르기 모달)
- assert "createSpreadsheet(c.host, c.doc, { readOnly: true, tabs: false })" in cards
- detail = _text(ROOT / "ui_template" / "ui_template_item_picker_detail.ts")
- assert "sheetEdit" not in detail
-
-
-def test_카드_저장은_읽은_문서에_시트를_덮음():
- cards = _text(M02 / "M02_MasterTemplete_ItemCards.ts")
- save = cards.split("async function saveSheet")[1].split("\n }\n")[0]
- assert "...(c.doc as unknown as Record), ...c.handle.getDoc()" in save
- assert "c.version = await opts.sheetEdit.save(c.kind, at, next, c.version);" in save
- assert 'c.version = String((got.value as { 판?: string | null }).판 ?? "");' in cards
- struct = _text(M02 / "M02_MasterTemplete_Structure.ts")
- assert "saveTemplate(getActiveLayer(), kind, at, null, version, doc)" in struct
-
-
-def test_알약은_전체_편집기와_같은_부품():
- struct = _text(M02 / "M02_MasterTemplete_Structure.ts")
- links = struct.split("async function cardLinks")[1].split("export interface")[0]
- assert "pillsFor(kind, ctl.column)" in links
- assert "buildMaterialPanel" not in struct # 자재 조합 판은 없앰
- assert "can: () => opts.isAdmin" in struct
-
-
-def test_저장_안_한_카드_고침_물음():
- struct = _text(M02 / "M02_MasterTemplete_Structure.ts")
- show = struct.split("const show = ")[1].split("const pickPrice")[0]
- assert "cards.dirty()" in show and "leaveOrStay(TEXT.discardCards," in show
- assert "opts.keepColumn?.(from)" in show
- main = _text(M02 / "M02_MasterTemplete_UI_Main.ts")
- assert "const busy = (): boolean => dirty || !!panel?.dirty() || toDrawing.waiting();" in main
- assert main.count("busy()") >= 2 # 떠나기 · 새로고침 막기
- assert (
- 'askUnsaved(L("M02_TreeUnsaved"))' in main
- ) # 나무 고침(settle)도 같은 물음 · 카드 저장 실패까지 봄
- assert main.index("await panel.saveCards();") < main.index("await panel.reload();")
- assert "keepColumn: (colId) => sheet?.selectColumn(colId)" in main
-
-
-def test_면적산출_카드_알약_줄_켬끔_기본_숨김():
- cards = _text(M02 / "M02_MasterTemplete_ItemCards.ts")
- assert 'paintPills(readStateRaw("m02-card-pills") === "true");' in cards # 없으면 숨김
- assert 'writeStateRaw("m02-card-pills", String(shown));' in cards
- assert 'sheets[0].host.classList.toggle("is-pills-off", !shown);' in cards
- assert "pills.hidden = !sheetEdit;" in cards # 고칠 수 있는 카드만(보기만은 알약 줄 없음)
- css = _text(M02 / "M02_MasterTemplete_Structure.css")
- assert re.search(r"\.m02-struct__sheet\.is-pills-off \.ss-links \{\s*display: none;", css)
- state = _text(ROOT / "A00_Common" / "b_page_state.ts")
- assert '"m02-card-pills": { bucket: "pref", scope: "global" },' in state
- # 상세(전체 편집기)는 켬끔 없음 — 늘 보임
- assert "is-pills-off" not in _text(M02 / "M02_MasterTemplete_UI_Main.ts")
-
-
-def test_면적산출_알약은_일위대가_pills_길():
- """39-4 D7 — 로직 물량 「이름|단위」 + 자재 「자재|MT키」 · 다 고정 · 선택 입력 알약 빠짐."""
- struct = _text(M02 / "M02_MasterTemplete_Structure.ts")
- pills = struct.split("export async function pillsFor")[1].split("async function cardLinks")[0]
- area = pills # 재료산출 갈래는 없앰 — 몸통이 면적산출 알약
- assert 'kind === "material"' not in pills
- assert "await fetchLaborPills(column)" in area
- assert "고정: true" in area and "...(p.자재 ? { 자재: p.자재 } : {})" in area
- assert "inputPills" not in area and "fetchComboInputs" not in struct
- api = _text(M02 / "M02_MasterTemplete_Api_Fetch.ts")
- assert "/layers/${activeLayer}/labor/${enc(column)}/pills" in api
diff --git a/resources/tester/test_m02_card_shell.py b/resources/tester/test_m02_card_shell.py
deleted file mode 100644
index 49976ec1e..000000000
--- a/resources/tester/test_m02_card_shell.py
+++ /dev/null
@@ -1,192 +0,0 @@
-"""M02 항목 카드 공용 틀(PLAN 31-7 · `M02_MasterTemplete_CardShell.ts`) — 네 카드가 틀 하나를 씀.
-
-정함: 제목 줄(제목 · 점 ● · 오른쪽 단추) + 한 줄 부제 · 「〇〇 수정」 = 빈 단추 한 모양 ·
-[저장] = 늘 보임 · 고쳐야 켜짐 · 카드 안 Ctrl+S · 알림 글 한 벌 · ? = 도면 · 엑셀 ·
-불러오는 중 = 네 카드 · 실패 = 카드 안 글 + [다시 불러오기] · 물음 한 번. 화면 조작 판정은 ORCA.
-"""
-
-from __future__ import annotations
-
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-M02 = ROOT / "M02_MasterTemplete"
-
-
-def _text(name: str) -> str:
- return (M02 / name).read_text(encoding="utf-8")
-
-
-def test_틀_제목_줄_부제_상태():
- shell = _text("M02_MasterTemplete_CardShell.ts")
- assert "children: [title, dot, tools]," in shell
- assert 'const title = el("span", { text: opt.title });' in shell
- assert 'tools.addEventListener("click", (event) => event.stopPropagation());' in shell
- assert 'el("div", { className: "m02-struct__sub", children: opt.sub })' in shell
- assert "loading: () => showLoading(host)," in shell
- assert "fail: (reason, retry) => host.replaceChildren(loadingError(reason, retry))," in shell
- assert "setDirty: (dirty) => (dot.hidden = !dirty)," in shell
- assert 'isCtrlKey(event, "s")' in shell # 카드 안 Ctrl+S
-
-
-def test_저장_단추_알림_한_벌():
- shell = _text("M02_MasterTemplete_CardShell.ts")
- assert 'saved: "저장했음"' in shell and 'failed: "저장 못 함 — {value}"' in shell
- assert 'stale: "그 사이 바뀜 — 다시 읽음"' in shell
- assert "button.disabled = !dirty || saving;" in shell
- assert "error instanceof StaleError ? CARD_TEXT.stale" in shell
- assert "shell.onSave(() => void (dirty && run()));" in shell
-
-
-def test_네_카드가_틀을_씀_수정_단추_한_모양():
- cards = _text("M02_MasterTemplete_ItemCards.ts")
- assert "const shell = cardShell({ title, body, sub: [no, name] });" in cards
- assert (
- "shell.tools.append(saver.button, take, edit, del);" in cards
- ) # 40-2 · ? 는 제목 옆(47-1)
- assert 'variant: "filled"' not in cards # [수정] 은 모두 빈 단추(ghost)
- assert "c.saver.button.hidden = !can;" in cards # [저장] 늘 보임 · ? 는 늘
- assert "helpButton(shell, title, CARD_HELP[kind])" in cards
- inputs = _text("M02_Labor_Values.ts")
- assert inputs.count("cardShell({") == 1 # 넣을 값 카드(선택 입력 카드는 없앰 · 39-7b)
- assert "shell.fail(" in inputs and "shell.loading()" in inputs
- assert "m02-struct__card ui-collapsible" not in inputs # 손으로 만든 겉 틀 없음
- drawing = _text("M02_MasterTemplete_DrawingCard.ts")
- assert "createButton" not in drawing and "showToast" not in drawing # 단추 · 알림은 틀
-
-
-def test_실패는_카드_안_글과_다시_불러오기():
- cards = _text("M02_MasterTemplete_ItemCards.ts")
- assert "showToast" not in cards # 토스트 안 씀(저장 알림은 틀)
- assert "c.shell.fail(" in cards and "reload" in cards
- picker = (ROOT / "ui_template" / "ui_template_item_picker_detail.ts").read_text("utf-8")
- # 모달 일위대가 카드도 M02 카드 틀 안 실패 글(142-1 · 옛 요약 · 값 카드 retry 없음)
- assert "paintLabor" not in picker and 'labor: () => void edit("inputs"),' in picker
-
-
-def test_일위대가_카드는_상세_카드_갈래():
- """43-4 — 일위대가 카드 몸 = Labor_Detail 카드 갈래(단가산출 로직 2행 표 + 자재목록 · 순서 ·
- 로직 추가 · 다이어그램 없음 · 빼기 그대로) · 카드 [저장] = 면적 먼저 → 일위대가 ·
- 한 줄 표 지움."""
- cards = _text("M02_MasterTemplete_ItemCards.ts")
- assert "mod.mountLaborDetail(laborHost, got.문서, {" in cards and "card: true," in cards
- assert 'makeCard("labor", PART_WORD.labor, laborHost, () => saveLabor())' in cards
- save = cards[cards.index("async function saveLabor()") :]
- assert save.index("laborEd.saveArea()") < save.index('saveTemplate(layer, "labor"')
- # 고칠 수 있음 = editable + 쓰는 길(142-1 · 고르기 모달은 보기만)
- assert "onChanged: (dirty) => laborCard.saver.mark(dirty && laborWritable())," in cards
- assert "Labor_View" not in cards # 한 줄 표(40-2) 안 씀
- detail = _text("M02_MasterTemplete_Labor_Detail.ts")
- assert "move: reorder," in detail # 85-3 — 카드도 순서(▲▼ · 끌기) · 빼기는 그대로
- # 서고 모드(50-3 · lib)도 더하기 · 다이어그램 없음
- # 51-11 사전조합 = 일위대가 상세와 같은 [로직 추가] · 같은 목록(걸러냄 없음)
- assert "opt.card ? null : addLogic" in detail
- assert "only" not in _text("M02_MasterTemplete_Labor_Pick.ts")
- assert "...(opt.card || lib ? [] : [dgBox])," in detail
- assert "opt.card ? null : addMat" in detail # 49-6 — 카드엔 [자재 추가] 없음 · 상세는 그대로
- rows = _text("M02_MasterTemplete_Labor_Rows.ts")
- assert (
- "const tools = !!(move || remove || option || ref);" in rows and "compactTable" not in rows
- )
- assert "compact" not in _text("M02_MasterTemplete_Labor_View.ts").split("*/", 1)[1]
-
-
-def test_일위대가_상세_단위는_표준_단위_고르기():
- """44-7 — 상세 머리 「단위」 = 표준 단위 목록(UnitPick) · 지금 값이 목록에 없어도 선택지 ·
- 고르면 캐시만(저장은 상세 [저장]) · 「-」 = 없음."""
- detail = _text("M02_MasterTemplete_Labor_Detail.ts")
- assert 'import { createUnitPick, NO_UNIT } from "./DataFlow/M02_DF_UnitPick";' in detail
- assert "extra: [unit0, cur.단위].filter((u): u is string => !!u)," in detail
- assert "cur.단위 = u === NO_UNIT ? null : u;" in detail
- assert "readOnly: !edit," in detail and "maxLength = 20" not in detail
-
-
-def test_도움말_제목_옆_네_절():
- """47-1 — ? = 카드 제목 바로 옆 · 도움말 = 설명 · 단축키 · 기능 · 사용법 · 카드 셋 모두."""
- shell = _text("M02_MasterTemplete_CardShell.ts")
- assert "shell.title.after(button);" in shell
- for part in ("about", "keys", "features", "steps"):
- assert f'"{part}"' in shell
- assert "event.stopPropagation(); // 누름 ≠ 접기" in shell
- help_ = _text("M02_MasterTemplete_CardHelp.ts")
- for kind in ("structure:", "labor:", "area:"):
- assert kind in help_
- assert "keys: DRAWING_KEYS," in help_ and "keys: SHEET_KEYS," in help_
- for label in ("가져오기", "수정", "삭제", "저장", "알약"):
- assert f'"{label}"' in help_
-
-
-def test_미리보기_파일_불러오기_없음():
- """47-2 · 495-2 — M02 [파일 업로드] 없음(카드 · 상세 모두) · DWG = CAD [삽입 → DWG 불러오기] 한 길."""
- drawing = _text("M02_MasterTemplete_Drawing.ts")
- for gone in ("noImport", "canImport", "importDrawingFile", "/m02/drawing-import"):
- assert gone not in drawing
- for name in ("M02_MasterTemplete_DrawingCard.ts", "M02_MasterTemplete_AreaDrawing.ts"):
- assert "noImport" not in _text(name)
-
-
-def test_일위대가_줄_고름과_옵션_단추():
- """47-5 — 줄 누름 = 고름(하이라이트 · 키로 둬서 다시 그려도 유지) · 넣을 값 모달 = [옵션] ·
- 단추 위로 · 아래로 · 옵션 · 삭제(빨강) · 묶음 간격 = 공용 `ui-btn-group`."""
- detail = _text("M02_MasterTemplete_Labor_Detail.ts")
- assert "open: pick," in detail and "option: openRow," in detail
- assert (
- "{ open: pick, option: openRow, ref: openRef }" in detail
- ) # 읽기만도 고름 · [옵션] = 보기 모달
- assert "selected: picked" in detail
- rows = _text("M02_MasterTemplete_Labor_Rows.ts")
- # 85-3 — ▲▼ 작은 단추(글은 title · aria) + 손잡이 끌기
- up, down = rows.index('arrow("▲", tc("Up")'), rows.index('arrow("▼", tc("Down")')
- assert rows.index("grip(),") < up and 'b.setAttribute("aria-label", label)' in rows
- assert "move: reorder," in detail and "opt.card ? {} : { move }" not in detail # 카드도 순서
- opt, rm = (
- rows.index('small(tc("Labor_Option")'),
- rows.index('small(tc("Remove"), () => remove(i), "danger")'),
- )
- assert up < down < opt < rm and 'className: "ui-btn-group"' in rows
- text = _text("M02_MasterTemplete_Labor_Text.ts")
- for t in ('Up: ["위로"', 'Down: ["아래로"', 'Remove: ["삭제"', 'Labor_Option: ["옵션"'):
- assert t in text
- css = (ROOT / "ui_template" / "ui_template_general_layout.css").read_text(encoding="utf-8")
- assert ".ui-btn-group {" in css and "gap: var(--btn-group-gap);" in css
-
-
-def test_순서칸_2행_참조줄_옵션_수정():
- """51-14 — 순서 칸 2행(위 [위로] [아래로] / 아래 [옵션]·[수정] [삭제]) · 일위조합 [수정] =
- 서고 원본 모달(저장 = 서고 저장 길 · 자기 층만 고침) · 닫으면 다시 셈 · 옛 단가승격 참조 줄 = 단추 없음(134-2)."""
- rows = _text("M02_MasterTemplete_Labor_Rows.ts")
- assert 'className: "m02-labrow__tools"' in rows
- assert 'ref && !row.참조.키.startsWith("SP-")' in rows
- assert '[small(tc("Labor_Edit"), () => ref(i))]' in rows
- detail = _text("M02_MasterTemplete_Labor_Detail.ts")
- assert "readOnly: !edit || ref.층 !== opt.layer," in detail
- assert "closed: () => alive && recalc()," in detail
- ref = _text("M02_MasterTemplete_Labor_RefEdit.ts")
- assert "saveTemplate(layer, kind, opt.ref.키, null, 판, body, opt.ref.주인)" in ref
- assert 'mode: "precombo",' in ref and "showConfirmDialog" in ref
- assert 'Labor_Edit: ["수정"' in _text("M02_MasterTemplete_Labor_Text.ts")
-
-
-def test_옵션_줄_구분_이름_별칭_병합():
- """113-1 — 옵션 글 = 구분 · 이름 · 별칭 병합 칸(colspan 3) · 나머지 칸은 위 줄에서 rowspan 2 ·
- 옵션 없는 로직은 한 줄 · 아래선 · hover · 고름 띠 · 끌기 아래선 맞춤."""
- rows = _text("M02_MasterTemplete_Labor_Rows.ts")
- assert "const SPAN = 3;" in rows
- assert "if (!note) return [tr, ...subs];" in rows
- assert '".m02-labrow__kind, .m02-labrow__name, .m02-labrow__alias"' in rows
- assert 'td.setAttribute("rowspan", "2");' in rows
- css = _text("M02_MasterTemplete_Labor.css")
- assert ".m02-labrow__row:has(+ .m02-labrow__optrow) td:not([rowspan])" in css
- assert ".m02-labrow__row.is-open:has(+ .m02-labrow__optrow:hover)" in css
- assert "tr:has(+ tr.m02-labrow__optrow.is-dragunder) > td[rowspan]" in css
- assert ".m02-labrow__optrow.is-selected > td:first-child" not in css
-
-
-def test_도면_상세_머리_파일_업로드_단추():
- """362-2 → 495-2 — 도면 상세 머리 [파일 업로드] 지움 · 도움말 = CAD [삽입] DWG 불러오기."""
- drawing = _text("M02_MasterTemplete_Drawing.ts")
- assert "파일 업로드" not in drawing and "importButton" not in drawing
- assert "📂" not in drawing and "파일 불러오기 (DXF" not in drawing
- help_ = _text("M02_MasterTemplete_CardHelp.ts")
- assert "파일 업로드" not in help_ and '["DWG 불러오기",' in help_
- assert "📂" not in _text("M02_MasterTemplete_CardHelp.ts")
diff --git a/resources/tester/test_m02_drawing_card.py b/resources/tester/test_m02_drawing_card.py
deleted file mode 100644
index a24d0d6cf..000000000
--- a/resources/tester/test_m02_drawing_card.py
+++ /dev/null
@@ -1,81 +0,0 @@
-"""도면 카드 미리보기 수정(PLAN 31-4) — 메뉴 없이 단축키로 고치기 · 카드 [저장] · 떠날 때 물음.
-
-코드 글 모양으로 봄(CAD 는 iframe · 화면 검증은 ORCA).
- - 고치기 = 층 고칠 권한 + 자료 자리의 저장 길(`write`) 둘 다 · 아니면 예전처럼 보기만.
- - 고칠 때 CAD 메뉴(제목줄 · 리본 · 패널 · 상태줄)는 숨김 · CAD 앱은 안 고침(같은 출처 스타일).
- - 저장 = 전체 편집기와 같은 길(`saveTemplate`) · 읽은 문서에 `도면` · `더한장`(모든 장)을 갈아 끼움 ·
- Ctrl+S 도 같음 — 지금 탭 장을 안 받음(2장 보다 저장해도 1장 그대로 · 105-3).
- - 여러 장 = 공용 탭 줄 고르기만(`mountStructureSheets` · `pickTabs`) · 「장 n」 배지 없음.
- - 저장 안 한 카드 고침 = 다른 항목 열기 · 페이지 떠나기 때 물음.
-"""
-
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-M02 = ROOT / "M02_MasterTemplete"
-
-
-def _text(name: str) -> str:
- return (M02 / name).read_text(encoding="utf-8")
-
-
-def test_고치기는_권한과_저장_길_둘_다():
- card = _text("M02_MasterTemplete_DrawingCard.ts")
- assert "const edit = drawingEditable(opt.editable, opt.source);" in card
- assert "editable && !!source.write;" in card
- assert "readOnly: !edit," in card and "preview: !edit," in card
- assert (
- "onSave: () => void opt.saver.run(() => doSave())," in card
- ) # CAD Ctrl+S = 카드 저장(문서 전체)
- source = _text("M02_MasterTemplete_ItemSource.ts")
- assert (
- "write: (part, column, 판, 문서) => saveTemplate(layer, part, column, null, 판, 문서)"
- in source
- )
-
-
-def test_메뉴는_숨기고_저장은_문서_전체():
- card = _text("M02_MasterTemplete_DrawingCard.ts")
- for part in (".cad-titlebar", ".cad-ribbon", ".cad-inspector", ".cad-statusbar"):
- assert part in card.split("const HIDE_EDIT")[1].split(";\n")[0]
- # 도번 · 열 · 판 은 읽은 그대로 · 모든 장(지금 탭 하나가 1장을 덮던 흠 · 105-3)
- assert (
- 'const next = fitLinks({\n ...doc,\n ...((await handle.getDoc()) as Pick),\n });'
- in card
- ) # 지운 표의 연결표 줄은 뺌(114-2 · 도면 상세 저장과 같은 몸)
- assert "async function doSave(): Promise" in card
- assert 'write("structure", opt.column, version, next)' in card
- for key in ("L · PL", "E · Delete", "Ctrl+Z · Ctrl+Y", "Ctrl+S"):
- assert f'["{key}"' in card # ? 도움말 — 전체 편집기 명령 별칭과 같은 것
-
-
-def test_저장_안_한_카드_고침은_물음():
- cards = _text("M02_MasterTemplete_ItemCards.ts")
- # 물음 한 번(31-7) — 어느 카드든(도면 · 엑셀) 고침이 있으면 · 틀의 저장 표시(saver)로 봄
- assert (
- '(await leaveOrStay(TEXT.discard, { save: saveAll, stillDirty: anyDirty })) === "stay"'
- in cards
- )
- assert "const anyDirty = (): boolean => cards.some((c) => c.saver.dirty());" in cards
- assert "dirty: anyDirty," in cards
- assert "dirty: () => cards.dirty()," in _text("M02_MasterTemplete_Structure.ts")
- main = _text("M02_MasterTemplete_UI_Main.ts")
- assert "const busy = (): boolean => dirty || !!panel?.dirty() || toDrawing.waiting();" in main
- assert main.count("!busy()") >= 2 # 떠날 때 물음 · 창 닫기 막음
-
-
-def test_카드_미리보기는_탭_고르기만():
- card = _text("M02_MasterTemplete_DrawingCard.ts")
- assert "const handle = mountStructureSheets(host, sheets, {" in card
- assert "pickTabs: true," in card
- assert "m02-drawing__sheets" not in card # 「장 n」 배지 지움
- panel = _text("M02_MasterTemplete_AreaDrawing.ts") # 면적 도면 패널도 탭(고르기만)
- assert "view = mountStructureSheets(stage, sheets, {" in panel and "pickTabs: true," in panel
- drawing = _text("M02_MasterTemplete_Drawing.ts")
- assert (
- "readOnly || options.pickTabs ? {} : { add: true, rename: true, remove: true, reorder: true },"
- in drawing
- )
- assert (
- "if ((readOnly || options.pickTabs) && !more.length) tabs.element.hidden = true;" in drawing
- )
diff --git a/resources/tester/test_m02_labor_tree.py b/resources/tester/test_m02_labor_tree.py
deleted file mode 100644
index c8b7aa5ce..000000000
--- a/resources/tester/test_m02_labor_tree.py
+++ /dev/null
@@ -1,73 +0,0 @@
-"""좌측 패널 일위대가(PLAN 39-2) — 맨 위 「일위대가 조합」 컨테이너 · 조합 나무 · 둘째 층 단추 벌 지움 ·
-일위대가는 구조물 조합 하위(구조물 도면 → 일위대가 → 면적산출). 글 검사(화면은 ORCA).
-
-옛 일위대가 라이브러리 나무 시험(PLAN 27-2b · 30-3 · 30-5)은 나무를 지우며 이 검사로 갈음.
-"""
-
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-M02 = ROOT / "M02_MasterTemplete"
-
-
-def _text(name: str) -> str:
- return (M02 / name).read_text("utf-8")
-
-
-def test_일위대가_나무_파일과_이음이_없음():
- assert not (M02 / "M02_MasterTemplete_Labor.ts").exists()
- assert not (M02 / "M02_MasterTemplete_Labor_Tree.ts").exists()
- page = _text("M02_MasterTemplete_UI_Page.ts")
- assert "buildLaborSection" not in page and 'layerBar("일위대가"' not in page
- side = _text("M02_MasterTemplete_UI_Side.ts")
- assert "LaborSection" not in side and "labor?." not in side
-
-
-def test_나무_부품에_일위대가_전용_칸_없음():
- panel = _text("M02_MasterTemplete_TreePanel.ts")
- for gone in ("maxDepth", "opt.item", "opt.clipKind", "clipKind?:"):
- assert gone not in panel, gone
-
-
-def test_좌측_하위_컨테이너와_전체_항목_길_없음():
- """45-2 — 구조물 조합 안 하위(구조물 도면 · 일위대가 · 면적산출 · 각 「전체 항목」) 없앰 ·
- 상세는 항목 카드 [수정]으로."""
- side = _text("M02_MasterTemplete_UI_Side.ts")
- for gone in (
- "COLUMN_KINDS",
- "columnSections",
- "onAll",
- "allPicked",
- "selectColumn",
- "m02-side__rule",
- ):
- assert gone not in side, gone
- page = _text("M02_MasterTemplete_UI_Page.ts")
- assert "buildAllItems" not in page and "onAll" not in page and "ALL_TITLE" not in page
- assert "buildAllItems" not in _text("M02_MasterTemplete_ItemList.ts")
- api = _text("M02_MasterTemplete_Api_Fetch.ts")
- assert '| "labor" |' in api and "일위대가번: string;" in api
- locale = (ROOT / "ui_template" / "ui_template_locale_m2.ts").read_text("utf-8")
- for gone in ("M02_ItemsAll", "M02_KindLabor", "M02_KindStructure", "M02_KindArea"):
- assert gone not in locale, gone
- assert "B01_Dashboard_CardUnitCombo" not in locale # 대시보드 일위대가 카드 없앰(44-7)
- css = _text("M02_MasterTemplete_UI_Style.css")
- assert ".m02-side__rule" not in css and ".m02-side__summary" not in css
-
-
-def test_층_단추는_구조물_조합_한_벌():
- page = _text("M02_MasterTemplete_UI_Page.ts")
- # 구조물 조합 줄 아래 하나 · 일위대가 사전조합은 층 따로(134-3 · `preBar`)
- assert page.count('layerBar("') == 1
- assert "const preBar = (): HTMLElement =>" in page
- assert 'layerBar("구조물조합", tree.add, () => void main.openTable(layer)),' in page
-
-
-def test_나무가_바뀌면_집계표를_다시_엶():
- """39-8 H1 — 새 항목 · 복사 생성 · 붙여넣기 · 지우기 · 이름 · 옮기기 = 나무 `apply` →
- `onChanged` 한 길 · 좌측 하위 열 줄은 없앰(45-2)."""
- page = _text("M02_MasterTemplete_UI_Page.ts")
- changed = page.split("onChanged: async (colId) => {")[1].split("},")[0]
- assert "main.openTable(layer, colId, true)" in changed and "side.refresh()" not in changed
- panel = _text("M02_MasterTemplete_TreePanel.ts")
- assert panel.count("await opt.onChanged(") == 1 # 나무 고침은 모두 apply 한 곳을 거침
diff --git a/resources/tester/test_modal_head_actions.py b/resources/tester/test_modal_head_actions.py
deleted file mode 100644
index a4fef5604..000000000
--- a/resources/tester/test_modal_head_actions.py
+++ /dev/null
@@ -1,110 +0,0 @@
-"""공용 모달 머리 단추 · 큰 창 · M02 수량산출 창(PLAN 147) — 소스 검사 · 화면 판정은 사용자.
-
-· 147-1 곁값 `actions`(머리 [닫기] 바로 왼쪽 · 넘긴 창만) · `wide`(96vw × 94vh · 몸만 스크롤)
-· 147-2 연결창 단추 넷 → 머리 · 큰 창 · 글 묻는 창 [확인] 머리 · [취소] 없음
-· 147-3 M02 입력 · 수량산출 · 참조 창 — 아래 단추 줄 없음 · [확인] 머리 · 읽기만이면 없음
-· 147-4 「손 입력」 → 「수기 입력」 · 짧은 글 「손」 → 「수기」 · [면적산출에서 잇기] · goArea 없음
-· 147-5 수량산출 시트 위 「고른 칸 … [확인]」 · 「면적산출 시트 — …」 없음 · [연결 풀기] 누르면 꺼짐
-"""
-
-from __future__ import annotations
-
-import re
-from pathlib import Path
-
-ROOT = Path(__file__).resolve().parents[2]
-
-
-def _text(rel: str) -> str:
- return (ROOT / rel).read_text(encoding="utf-8")
-
-
-def _block(css: str, selector: str) -> str:
- found = re.search(rf"^{re.escape(selector)} \{{([^}}]*)\}}", css, re.M)
- assert found, selector
- return found.group(1)
-
-
-def test_147_1_곁값_actions_wide():
- ts = _text("ui_template/ui_template_modal.ts")
- assert "actions?: HTMLElement[];" in ts
- assert "wide?: boolean;" in ts
- # 몸에서 만든 단추도 넣게 mount 셋째 인자 = 머리 자리
- assert "opts.mount(body, close, actions);" in ts
- # 단추가 있을 때만 [닫기] 바로 앞에 — 없으면 지금 꼴(h3 · [닫기])
- assert "if (actions.childElementCount) closeButton.before(actions);" in ts
- assert 'children: [el("h3", { text: opts.title }), closeButton]' in ts
- assert '"ui-modal--wide "' in ts
-
-
-def test_147_1_머리_자리_큰_창_css():
- css = _text("ui_template/ui_template_modal.css")
- assert "margin-right: auto;" in _block(css, ".ui-modal__top > h3")
- assert "justify-content: space-between;" in _block(css, ".ui-modal__top")
- wide = _block(css, ".ui-modal.ui-modal--wide")
- for rule in ("width: 96vw;", "height: 94vh;", "--modal-max: 94vh;", "overflow: hidden;"):
- assert rule in wide, rule
- body = _block(css, ".ui-modal--wide > .ui-modal__body")
- assert "overflow: auto;" in body and "min-height: 0;" in body
-
-
-def test_147_2_연결창_머리_단추_큰_창():
- ts = _text("ui_template/ui_template_item_picker.ts")
- assert "children: [copyButton, manageButton, clearButton, applyButton]," in ts
- assert "actions: [headButtons]," in ts and "wide: true," in ts
- # 편집 화면 = 머리 단추도 숨김(편집 중 [적용] 막음) · 돌아오면 다시
- assert "headButtons.hidden = true;" in ts and "headButtons.hidden = false;" in ts
- # 안내 글(구조물 [저장]) 은 아래 남김
- assert "ui-item-picker__saveline" in ts
- css = _text("ui_template/ui_template_item_picker.css")
- assert ".ui-item-picker .ui-modal__actions[hidden]" in css
- assert "width: min(1320px, 96vw);" not in css
-
-
-def test_147_2_글_묻는_창_확인만_머리():
- ask = _text("ui_template/ui_template_item_picker_ask.ts")
- assert "head.append(createButton({ label: opts.okLabel" in ask
- assert "cancelLabel" not in ask
- for rel in (
- "ui_template/ui_template_item_picker.ts",
- "ui_template/ui_template_item_picker_detail.ts",
- ):
- assert "cancelLabel" not in _text(rel), rel
-
-
-def test_147_3_m02_창_셋_머리_확인():
- m02 = "M02_MasterTemplete/M02_MasterTemplete_"
- for name in ("Labor_Input", "Labor_QtyModal", "Labor_RefEdit"):
- ts = _text(f"{m02}{name}.ts")
- assert "m02-labin__foot" not in ts, name
- assert "mount: (body, " in ts and ", head) => {" in ts, name
- # 읽기만 = 머리 [닫기]만
- assert "if (!opt.readOnly)" in ts and "head.append(" in ts, name
- assert "In_Cancel" not in _text(f"{m02}Labor_Text.ts")
- assert ".m02-labin__foot" not in _text(f"{m02}Labor.css")
-
-
-def test_147_4_수기_입력_잇기_없음():
- m02 = ROOT / "M02_MasterTemplete"
- text = _text("M02_MasterTemplete/M02_MasterTemplete_Labor_Text.ts")
- assert 'In_QtyHand: ["수기 입력", "Manual"],' in text
- assert 'Labor_Hand: ["수기", "Manual"],' in text
- assert "In_QtyGoArea" not in text
- assert "손 입력" not in _text("M02_MasterTemplete/M02_MasterTemplete_CardHelp.ts")
- for path in m02.glob("*.ts"):
- src = path.read_text(encoding="utf-8")
- assert "goArea" not in src and "GoArea" not in src, path.name
-
-
-def test_147_5_시트_위_글_없음_풀기_꺼짐():
- qty = _text("M02_MasterTemplete/M02_MasterTemplete_Labor_QtyModal.ts")
- text = _text("M02_MasterTemplete/M02_MasterTemplete_Labor_Text.ts")
- for key in ("Labor_SheetHint", "Labor_CellPending", "Labor_UnlinkPending"):
- assert key not in qty and key not in text, key
- assert "data-labor-qty-state" not in qty and "m02-cellpick__hint" not in qty
- assert ".m02-cellpick__hint" not in _text("M02_MasterTemplete/M02_MasterTemplete_AreaPanel.css")
- # [연결 풀기] = 누르면 꺼짐 · 칸을 고르면 다시 켜짐 · 고름 상태는 [확인] 때 씀
- assert 'pending = { kind: "unlink" };' in qty
- assert "if (unlink) unlink.disabled = true;" in qty
- assert "if (unlink) unlink.disabled = false;" in qty
- assert "...(opt.handOnly ? [] : [host])," in qty
diff --git a/resources/tester/test_sheet_f2_caret.py b/resources/tester/test_sheet_f2_caret.py
deleted file mode 100644
index ade04c092..000000000
--- a/resources/tester/test_sheet_f2_caret.py
+++ /dev/null
@@ -1,24 +0,0 @@
-"""표 부품(`ui_template_sheet.ts`) 칸 고치기 — 엑셀처럼 F2 는 커서를 글 끝에(이어 씀).
-
-화면 조작은 ORCA 로 봄 — 여기서는 키마다 고치기 방식이 안 섞이는지만 봄.
-"""
-
-from __future__ import annotations
-
-import re
-from pathlib import Path
-
-SHEET = Path(__file__).resolve().parents[2] / "ui_template" / "sheet" / "ui_template_sheet.ts"
-
-
-def test_F2_는_글_끝_바로_치기는_바꿈_두_번_누르기는_그대로():
- body = SHEET.read_text(encoding="utf-8")
- # Enter · F2 = 글 끝 커서
- assert re.search(
- r'event\.key === "F2"\) \{\s*event\.preventDefault\(\);\s*edit\(undefined, true\);', body
- )
- # 바로 치기 = 누른 글자로 바꿈
- assert "edit(event.key);" in body
- # 두 번 누르기 = 예전대로(글 전부 고름)
- assert 'else if (target.closest("td[data-r]")) edit();' in body
- assert "box.setSelectionRange(box.value.length, box.value.length)" in body