diff --git a/A00_Common/design/design_profile.ts b/A00_Common/design/design_profile.ts
index cc0b3335e..8b2b0f640 100644
--- a/A00_Common/design/design_profile.ts
+++ b/A00_Common/design/design_profile.ts
@@ -453,7 +453,7 @@ export function createDesignProfile(ctx: DesignProfileContext) {
       zoom: profileZoom.state,
       holdElevationRange: elevationHold.hold,
       toolActive: () => tools.mode() !== "none",
-      selectedRuns: () => tools.selectedRuns(),
+      tools,
       stationIdAtStructure,
       redraw: draw,
       setElevationWindowUpdater: (update) => {
diff --git a/A00_Common/design/design_profile_free.ts b/A00_Common/design/design_profile_free.ts
new file mode 100644
index 000000000..9a35981fb
--- /dev/null
+++ b/A00_Common/design/design_profile_free.ts
@@ -0,0 +1,363 @@
+/* =============================================================================
+ * A00_Common/design/design_profile_free.ts
+ * 종단 [자유지정] 계산 — 범위 · 클릭 점 · 측점선 붙음 · 높이 변환 · 기울기 판정 · 적용(215-1).
+ *
+ * 흐름: 세로 측점선 둘로 범위를 고름 → 시작(또는 끝) 세로선 근처 클릭 = 그 측점 계획고에 이은
+ * 채 시작 → 클릭마다 점 하나(가로 = 범위 안 가장 가까운 측점선 · 높이 = 클릭한 높이) → 반대쪽
+ * 세로선 근처 클릭 또는 Enter = 그 측점 계획고에 이어 끝. Esc = 취소 · Backspace = 마지막 점 빼기.
+ *
+ * 적용은 직선화와 같은 길 — 편집 델타(`station_offsets` · `curve_radii`)만 만들어 캐시에 쓰고
+ * [저장] 때 서버가 다시 셈한다. 꺾이는 점 종단곡선 = 직선화 틸팅과 같은 기본 길이 L
+ * (R = L / |대수차|). 양 끝 세로선의 라운드는 직선화처럼 그대로 둔다.
+ *
+ * 화면(`design_profile_free_view.ts`)은 클릭 · 마우스 · 키만 넘기고 여기 표시 자료를 그린다.
+ * ========================================================================== */
+
+import type {
+  AlignmentBase,
+  AlignmentEdits,
+  ProfileAlignment,
+} from "../../B05_Profile/B05_Profile_UI_Profile_Alignment";
+import {
+  buildAlignment,
+  chainageKey,
+  controlElevationAt,
+} from "../../B05_Profile/B05_Profile_UI_Profile_Alignment";
+import {
+  baseElevationAt,
+  defaultCurveLength,
+} from "../../B05_Profile/B05_Profile_UI_Profile_Straighten";
+
+/** 두 chainage 를 같은 측점으로 볼 허용 오차(m). */
+const SAME_M = 1e-6;
+/** 클릭 높이를 이 단위(m)로 끊는다. */
+const ELEVATION_STEP_M = 0.01;
+
+export interface FreeVertex {
+  chainage_m: number;
+  elevation_m: number;
+}
+
+/** range = 범위 고르는 중 · armed = 시작 세로선을 기다림 · drawing = 점 찍는 중. */
+export type FreePhase = "range" | "armed" | "drawing";
+
+/** 그래프 세로 창 — 그릴 때 기준(`data-yw-*`)과 지금 걸린 변환. */
+export interface ChartWindow {
+  center: number;
+  pxPerM: number;
+  zero: number;
+  scale: number;
+  offset: number;
+}
+
+/** 세로 창 변환 글(`translate(0 a) scale(1 b)`)을 읽는다 — 없으면 그릴 때 그대로. */
+export function parseWindowTransform(text: string | null): { scale: number; offset: number } {
+  const num = "([-+0-9.eE]+)";
+  const match = new RegExp(`translate\\(\\s*0[ ,]+${num}\\s*\\)\\s*scale\\(\\s*1[ ,]+${num}`).exec(
+    text ?? "",
+  );
+  if (!match) return { scale: 1, offset: 0 };
+  const offset = Number(match[1]);
+  const scale = Number(match[2]);
+  return Number.isFinite(offset) && Number.isFinite(scale) && scale > 0
+    ? { scale, offset }
+    : { scale: 1, offset: 0 };
+}
+
+/** 그래프 y(px) → 표고(m). 과장 배율은 `pxPerM` 에 들어 있다. */
+export function elevationAtChartY(view: ChartWindow, y: number): number {
+  const baked = (y - view.offset) / view.scale;
+  return view.center + (view.zero - baked) / view.pxPerM;
+}
+
+/** 표고(m) → 그래프 y(px). `elevationAtChartY` 의 역. */
+export function chartYAtElevation(view: ChartWindow, elevationM: number): number {
+  return view.scale * (view.zero - (elevationM - view.center) * view.pxPerM) + view.offset;
+}
+
+/** 가장 가까운 측점 세로선. 범위를 주면 그 안(양 끝 포함)에서만 고른다. */
+export function snapStation(
+  stations: number[],
+  chainageM: number,
+  range: [number, number] | null = null,
+): number | null {
+  let best: number | null = null;
+  for (const station of stations) {
+    if (range && (station < range[0] - SAME_M || station > range[1] + SAME_M)) continue;
+    if (best === null || Math.abs(station - chainageM) < Math.abs(best - chainageM)) {
+      best = station;
+    }
+  }
+  return best;
+}
+
+/** 두 점 사이 기울기(%). */
+export function gradePct(from: FreeVertex, to: FreeVertex): number {
+  const span = to.chainage_m - from.chainage_m;
+  return Math.abs(span) > 1e-12 ? ((to.elevation_m - from.elevation_m) / span) * 100 : 0;
+}
+
+/** 임도 기준 최대 기울기를 넘는가 — 판정은 선형 계산의 위반 판정(`violations`)과 같은 식. */
+export function overGrade(pct: number, maxPct: number): boolean {
+  return Math.abs(pct) > maxPct + 1e-6;
+}
+
+/** 점들을 잇는 꺾은선 위 표고(chainage 오름차순 꺾은선). */
+function elevationOnPath(path: FreeVertex[], chainageM: number): number {
+  for (let index = 1; index < path.length; index += 1) {
+    const left = path[index - 1];
+    const right = path[index];
+    if (chainageM > right.chainage_m + SAME_M) continue;
+    const span = right.chainage_m - left.chainage_m;
+    const ratio = span > 1e-12 ? (chainageM - left.chainage_m) / span : 0;
+    return left.elevation_m + (right.elevation_m - left.elevation_m) * ratio;
+  }
+  return path[path.length - 1].elevation_m;
+}
+
+/**
+ * 꺾은선을 계획고 편집으로 바꾼다 — 범위 안 변화점 · 클릭 점을 그 선 위로 옮기고 옛 라운드를
+ * 지운 뒤, 꺾이는 클릭 점에만 종단곡선을 넣는다. 양 끝 점은 손대지 않는다(직선화와 같음).
+ */
+export function buildFreeEdits(
+  base: AlignmentBase,
+  edits: AlignmentEdits,
+  vertices: FreeVertex[],
+): AlignmentEdits {
+  const path = [...vertices].sort((a, b) => a.chainage_m - b.chainage_m);
+  if (path.length < 2) return edits;
+  const fromM = path[0].chainage_m;
+  const toM = path[path.length - 1].chainage_m;
+  if (toM - fromM <= SAME_M) return edits;
+  const inner = new Map<string, number>();
+  buildAlignment(base, edits).pvi.forEach((node) => {
+    if (node.chainage_m > fromM + SAME_M && node.chainage_m < toM - SAME_M) {
+      inner.set(chainageKey(node.chainage_m), node.chainage_m);
+    }
+  });
+  path
+    .slice(1, -1)
+    .forEach((vertex) => inner.set(chainageKey(vertex.chainage_m), vertex.chainage_m));
+  const offsets = { ...edits.station_offsets };
+  const radii = { ...edits.curve_radii };
+  inner.forEach((chainage, key) => {
+    const target = elevationOnPath(path, chainage);
+    offsets[key] = Number((target - baseElevationAt(base, chainage)).toFixed(6));
+    delete radii[key];
+  });
+  for (let index = 1; index < path.length - 1; index += 1) {
+    const gradeIn = gradePct(path[index - 1], path[index]) / 100;
+    const gradeOut = gradePct(path[index], path[index + 1]) / 100;
+    const deltaGrade = Math.abs(gradeOut - gradeIn);
+    if (deltaGrade < 1e-9) continue;
+    radii[chainageKey(path[index].chainage_m)] = Number(
+      (defaultCurveLength(base, deltaGrade) / deltaGrade).toFixed(6),
+    );
+  }
+  return { ...edits, station_offsets: offsets, curve_radii: radii };
+}
+
+export interface FreeSegment {
+  from: FreeVertex;
+  to: FreeVertex;
+  grade_pct: number;
+  over: boolean;
+  /** 마지막 점 → 마우스 자리(아직 안 찍음). */
+  preview: boolean;
+}
+
+/** 오버레이 표시 자료 — 화면은 이것만 그린다. */
+export interface FreeMarks {
+  /** 고른 범위(강조 띠) — 둘 다 고르기 전엔 null. */
+  band: [number, number] | null;
+  /** 세로 강조선 chainage(범위 첫 측점 또는 범위 양 끝). */
+  edges: number[];
+  segments: FreeSegment[];
+  /** 찍힌 점(시작 점 포함). */
+  dots: FreeVertex[];
+}
+
+export interface FreeDrawDeps {
+  base: () => AlignmentBase | null;
+  alignment: () => ProfileAlignment | null;
+  edits: () => AlignmentEdits;
+  /** 편집 적용 — 직선화 결과와 같은 길(캐시 · 되돌리기 · 막기 규칙). */
+  apply: (next: AlignmentEdits) => void;
+  /** 모드를 끈다(적용 뒤 · Esc). */
+  close: () => void;
+  /** 단계 · 안내가 바뀜. */
+  changed: () => void;
+}
+
+export interface FreeDraw {
+  phase: () => FreePhase;
+  reset: () => void;
+  /** 그래프 클릭 — 날 chainage · 표고와 그래프 측점선 목록. 먹었으면 true. */
+  click: (chainageM: number, elevationM: number, stations: number[]) => boolean;
+  /** 마우스 자리 — 미리 보기 대상. 그래프 밖이면 null. */
+  hover: (pointer: { chainageM: number; elevationM: number; stations: number[] } | null) => void;
+  /** Enter · Escape · Backspace — 먹었으면 true. */
+  key: (key: string) => boolean;
+  marks: () => FreeMarks;
+  hint: () => string;
+}
+
+export function createFreeDraw(deps: FreeDrawDeps): FreeDraw {
+  let phase: FreePhase = "range";
+  let pending: number | null = null;
+  let range: [number, number] | null = null;
+  let anchor: number | null = null;
+  let points: FreeVertex[] = [];
+  let target: FreeVertex | null = null;
+
+  function reset(): void {
+    phase = "range";
+    pending = null;
+    range = null;
+    anchor = null;
+    points = [];
+    target = null;
+  }
+
+  /** 그 측점의 지금 계획고(변화점이면 라운드 중심 z — 직선화와 같은 값). */
+  function heightAt(chainageM: number): number | null {
+    const alignment = deps.alignment();
+    return alignment ? controlElevationAt(alignment, chainageM) : null;
+  }
+
+  const finishM = (): number | null =>
+    range && anchor !== null ? (anchor === range[0] ? range[1] : range[0]) : null;
+  const same = (a: number | null, b: number | null): boolean =>
+    a !== null && b !== null && Math.abs(a - b) < SAME_M;
+
+  /** 지나온 점(시작 포함) — 마지막 것이 다음 선의 출발점. */
+  function path(): FreeVertex[] {
+    if (anchor === null) return [];
+    const z = heightAt(anchor);
+    return z === null ? [] : [{ chainage_m: anchor, elevation_m: z }, ...points];
+  }
+
+  /** 클릭 · 마우스 자리 → 다음 점 후보. 끝 세로선이면 그 계획고, 뒤로 가면 null. */
+  function candidate(chainageM: number, elevationM: number, stations: number[]): FreeVertex | null {
+    if (phase !== "drawing" || !range) return null;
+    const station = snapStation(stations, chainageM, range);
+    const end = finishM();
+    if (station === null || end === null) return null;
+    if (same(station, end)) {
+      const z = heightAt(end);
+      return z === null ? null : { chainage_m: end, elevation_m: z };
+    }
+    const walked = path();
+    const last = walked[walked.length - 1];
+    if (!last || (station - last.chainage_m) * Math.sign(end - last.chainage_m) <= SAME_M) {
+      return null;
+    }
+    const z = Math.round(elevationM / ELEVATION_STEP_M) * ELEVATION_STEP_M;
+    return { chainage_m: station, elevation_m: Number(z.toFixed(3)) };
+  }
+
+  function finish(): void {
+    const base = deps.base();
+    const end = finishM();
+    const z = end === null ? null : heightAt(end);
+    if (!base || end === null || z === null) return;
+    const vertices = [...path(), { chainage_m: end, elevation_m: z }];
+    const next = buildFreeEdits(base, deps.edits(), vertices);
+    reset();
+    deps.apply(next);
+    deps.close();
+  }
+
+  return {
+    phase: () => phase,
+    reset,
+    click(chainageM, elevationM, stations) {
+      if (phase === "range") {
+        const station = snapStation(stations, chainageM);
+        if (station === null) return true;
+        if (pending === null || same(pending, station)) pending = station;
+        else {
+          range = [Math.min(pending, station), Math.max(pending, station)];
+          pending = null;
+          phase = "armed";
+        }
+      } else if (phase === "armed" && range) {
+        const station = snapStation(stations, chainageM, range);
+        if (same(station, range[0]) || same(station, range[1])) {
+          anchor = station;
+          points = [];
+          phase = "drawing";
+        }
+      } else if (phase === "drawing") {
+        const next = candidate(chainageM, elevationM, stations);
+        if (!next) return true;
+        if (same(next.chainage_m, finishM())) {
+          finish();
+          return true;
+        }
+        points.push(next);
+      }
+      target = null;
+      deps.changed();
+      return true;
+    },
+    hover(pointer) {
+      target = pointer ? candidate(pointer.chainageM, pointer.elevationM, pointer.stations) : null;
+    },
+    key(key) {
+      if (key === "Escape") {
+        reset();
+        deps.close();
+        return true;
+      }
+      if (key === "Enter") {
+        if (phase !== "drawing") return false;
+        finish();
+        return true;
+      }
+      if (key === "Backspace") {
+        if (phase !== "drawing") return false;
+        if (points.length) points.pop();
+        else {
+          anchor = null;
+          phase = "armed";
+        }
+        target = null;
+        deps.changed();
+        return true;
+      }
+      return false;
+    },
+    marks() {
+      const maxPct = deps.base()?.policy.max_grade_pct ?? Number.POSITIVE_INFINITY;
+      const dots = path();
+      const line = target ? [...dots, target] : dots;
+      const segments: FreeSegment[] = [];
+      for (let index = 1; index < line.length; index += 1) {
+        const grade = gradePct(line[index - 1], line[index]);
+        segments.push({
+          from: line[index - 1],
+          to: line[index],
+          grade_pct: grade,
+          over: overGrade(grade, maxPct),
+          preview: target !== null && index === line.length - 1,
+        });
+      }
+      return {
+        band: range,
+        edges: range ? [...range] : pending !== null ? [pending] : [],
+        segments,
+        dots,
+      };
+    },
+    hint() {
+      if (phase === "range") {
+        return pending === null
+          ? "자유지정 — 범위 첫 세로 측점선을 고르세요"
+          : `${pending.toFixed(1)}m 선택 — 범위 끝 세로 측점선을 고르세요`;
+      }
+      if (phase === "armed") return "시작(또는 끝) 세로선 근처를 눌러 시작하세요 (Esc 취소)";
+      return "클릭마다 점 · 반대쪽 세로선 또는 Enter 로 끝 (Backspace 점 빼기 · Esc 취소)";
+    },
+  };
+}
diff --git a/A00_Common/design/design_profile_free_view.ts b/A00_Common/design/design_profile_free_view.ts
new file mode 100644
index 000000000..9584478f9
--- /dev/null
+++ b/A00_Common/design/design_profile_free_view.ts
@@ -0,0 +1,217 @@
+/* =============================================================================
+ * A00_Common/design/design_profile_free_view.ts
+ * 종단 [자유지정] 화면 — 그래프 클릭 · 마우스 · 오버레이(범위 강조 · 점선 · 기울기 글)(215-1).
+ *
+ * 계산 · 상태는 `design_profile_free.ts` 몫. 여기서는 마우스 자리를 (chainage, 표고)로 바꿔
+ * 넘기고 돌려받은 표시 자료를 그린다. 표고 변환은 종단 그래프 세로 창(`data-yw-*` + 지금 걸린
+ * 변환)을 그대로 되짚는다 — 스크롤로 창이 바뀌어도 같은 식이다.
+ *
+ * 그래프는 그릴 때마다 새로 만들어지므로 그릴 때마다 `mount` 를 다시 부른다.
+ * 자유지정 중엔 그래프 클릭 · 누르기를 여기서 먹는다(측점 고르기 · 구조물 끌기로 새지 않게).
+ * ========================================================================== */
+
+import { Y_WINDOW_ATTRS, Y_WINDOW_CLASS } from "../../B06_Section/B06_Section_UI_Longitudinal";
+import {
+  chartYAtElevation,
+  elevationAtChartY,
+  parseWindowTransform,
+  type ChartWindow,
+  type FreeDraw,
+} from "./design_profile_free";
+
+const SVG_NS = "http://www.w3.org/2000/svg";
+
+/** 종단 그래프 한 벌의 가로 매핑 — 렌더러가 그릴 때마다 넘긴다. */
+export interface FreeChartGeom {
+  /** 그래프 래퍼(`b05-profile__chart`). */
+  chart: HTMLElement;
+  /** 가로 스크롤러 — 스크롤하면 세로 창이 바뀌어 다시 그린다. */
+  scroller: HTMLElement;
+  x: (chainageM: number) => number;
+  toChainage: (px: number) => number;
+  widthPx: number;
+  heightPx: number;
+  /** 그래프 세로 측점선 chainage(정규 + 구조물). */
+  stations: number[];
+}
+
+export interface FreeView {
+  /** 그래프를 새로 그렸거나 모드가 바뀜 — 켜져 있으면 붙이고, 꺼져 있으면 뗀다. */
+  mount: (geom: FreeChartGeom | null, active: boolean) => void;
+  redraw: () => void;
+}
+
+function svgEl(tag: string, attrs: Record<string, string | number>): SVGElement {
+  const element = document.createElementNS(SVG_NS, tag);
+  Object.entries(attrs).forEach(([name, value]) => element.setAttribute(name, String(value)));
+  return element;
+}
+
+/** 지금 그래프의 세로 창 — 자동 창 SVG 가 없으면 null. */
+function readWindow(chart: HTMLElement): { view: ChartWindow; top: number } | null {
+  const svg = chart.querySelector<SVGSVGElement>(`svg[${Y_WINDOW_ATTRS.auto}="1"]`);
+  if (!svg) return null;
+  const read = (name: string): number => Number(svg.getAttribute(name));
+  const layer = svg.querySelector(`.${Y_WINDOW_CLASS}`);
+  const view: ChartWindow = {
+    center: read(Y_WINDOW_ATTRS.center),
+    pxPerM: read(Y_WINDOW_ATTRS.pxPerM),
+    zero: read(Y_WINDOW_ATTRS.zero),
+    ...parseWindowTransform(layer?.getAttribute("transform") ?? null),
+  };
+  if (![view.center, view.pxPerM, view.zero].every(Number.isFinite) || view.pxPerM <= 0) {
+    return null;
+  }
+  // 그래프 SVG 가 래퍼 위쪽에서 떨어져 있으면 그만큼 오버레이 y 를 맞춘다.
+  const top = svg.getBoundingClientRect().top - chart.getBoundingClientRect().top;
+  return { view, top };
+}
+
+export function createFreeView(free: FreeDraw): FreeView {
+  let geom: FreeChartGeom | null = null;
+  let active = false;
+  let overlay: SVGSVGElement | null = null;
+  let listeners: AbortController | null = null;
+
+  /** 마우스 자리 → (chainage, 표고). 그래프 밖이면 null. */
+  function pointerAt(event: MouseEvent) {
+    if (!geom) return null;
+    const win = readWindow(geom.chart);
+    if (!win) return null;
+    const rect = geom.chart.getBoundingClientRect();
+    const chainageM = geom.toChainage(event.clientX - rect.left);
+    if (!Number.isFinite(chainageM)) return null;
+    const elevationM = elevationAtChartY(win.view, event.clientY - rect.top - win.top);
+    return { chainageM, elevationM, stations: geom.stations };
+  }
+
+  function redraw(): void {
+    overlay?.remove();
+    overlay = null;
+    if (!geom || !active) return;
+    const win = readWindow(geom.chart);
+    if (!win) return;
+    const { x, widthPx, heightPx } = geom;
+    const y = (elevationM: number): number => chartYAtElevation(win.view, elevationM) + win.top;
+    const marks = free.marks();
+    const svg = svgEl("svg", {
+      class: "b05-profile-freemark",
+      width: widthPx,
+      height: heightPx,
+      viewBox: `0 0 ${widthPx} ${heightPx}`,
+    }) as SVGSVGElement;
+    if (marks.band) {
+      const [left, right] = marks.band.map(x);
+      svg.append(
+        svgEl("rect", {
+          class: "b05-profile-freemark__band",
+          x: left,
+          y: 0,
+          width: Math.max(0, right - left),
+          height: heightPx,
+        }),
+      );
+    }
+    marks.edges.forEach((chainage) =>
+      svg.append(
+        svgEl("line", {
+          class: "b05-profile-freemark__edge",
+          x1: x(chainage),
+          x2: x(chainage),
+          y1: 0,
+          y2: heightPx,
+        }),
+      ),
+    );
+    marks.segments.forEach((segment) => {
+      const x1 = x(segment.from.chainage_m);
+      const x2 = x(segment.to.chainage_m);
+      const y1 = y(segment.from.elevation_m);
+      const y2 = y(segment.to.elevation_m);
+      const over = segment.over ? " is-over" : "";
+      svg.append(
+        svgEl("line", {
+          class: `b05-profile-freemark__line${over}${segment.preview ? " is-preview" : ""}`,
+          x1,
+          y1,
+          x2,
+          y2,
+        }),
+      );
+      const label = svgEl("text", {
+        class: `b05-profile-freemark__grade${over}`,
+        x: (x1 + x2) / 2,
+        y: (y1 + y2) / 2 - 6,
+        "text-anchor": "middle",
+      });
+      label.textContent = `${segment.grade_pct.toFixed(1)}%`;
+      svg.append(label);
+    });
+    marks.dots.forEach((dot) =>
+      svg.append(
+        svgEl("circle", {
+          class: "b05-profile-freemark__dot",
+          cx: x(dot.chainage_m),
+          cy: y(dot.elevation_m),
+          r: 3.5,
+        }),
+      ),
+    );
+    overlay = svg;
+    geom.chart.append(svg);
+  }
+
+  function mount(next: FreeChartGeom | null, on: boolean): void {
+    listeners?.abort();
+    listeners = null;
+    if (next) geom = next;
+    active = on;
+    if (!on) free.reset();
+    if (!geom || !on || !geom.chart.isConnected) {
+      overlay?.remove();
+      overlay = null;
+      return;
+    }
+    listeners = new AbortController();
+    const { signal } = listeners;
+    const chart = geom.chart;
+    const swallow = (event: Event): void => {
+      event.stopPropagation();
+      event.stopImmediatePropagation();
+    };
+    // 누르기는 삼킴 — 구조물 측점선 끌기 · 계획고 버튼 길게 누르기가 시작되지 않게.
+    chart.addEventListener("pointerdown", swallow, { capture: true, signal });
+    chart.addEventListener(
+      "click",
+      (event) => {
+        swallow(event);
+        event.preventDefault();
+        const pointer = pointerAt(event);
+        if (pointer) free.click(pointer.chainageM, pointer.elevationM, pointer.stations);
+        free.hover(pointerAt(event));
+        redraw();
+      },
+      { capture: true, signal },
+    );
+    chart.addEventListener(
+      "mousemove",
+      (event) => {
+        free.hover(pointerAt(event));
+        redraw();
+      },
+      { signal },
+    );
+    chart.addEventListener(
+      "mouseleave",
+      () => {
+        free.hover(null);
+        redraw();
+      },
+      { signal },
+    );
+    geom.scroller.addEventListener("scroll", redraw, { signal, passive: true });
+    redraw();
+  }
+
+  return { mount, redraw };
+}
diff --git a/B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts b/B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts
index 043b0094a..a2c856a30 100644
--- a/B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts
+++ b/B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts
@@ -27,6 +27,8 @@ import {
   tiltStraightRun,
 } from "./B05_Profile_UI_Profile_Straighten";
 import type { IrregularStation } from "./B05_Profile_UI_IrregularStations";
+import { createFreeDraw } from "../A00_Common/design/design_profile_free";
+import { createFreeView, type FreeChartGeom } from "../A00_Common/design/design_profile_free_view";
 
 /** 방향키 한 번에 움직이는 양(m) — 계획고·누가거리 모두 같다(사용자 확정). */
 const KEY_STEP_M = 0.1;
@@ -112,6 +114,18 @@ export function createPanelTools(ctx: PanelToolsContext): PanelTools {
     pause: () => (syncPipes(), inner.pause()),
   };
 
+  // [자유지정] — 적용은 직선화 결과와 같은 길(applyEdits · 이력 · 막기 규칙)(215-1).
+  const free = createFreeDraw({
+    base: ctx.base,
+    alignment: ctx.alignment,
+    edits: ctx.edits,
+    apply: (next) => ctx.applyEdits(next),
+    close: () => tools.clear(),
+    changed: ctx.refresh,
+  });
+  const freeView = createFreeView(free);
+  let lastGeom: FreeChartGeom | null = null;
+
   const tools = createProfileTools({
     onStraighten: (fromM, toM) => {
       const base = ctx.base();
@@ -144,12 +158,19 @@ export function createPanelTools(ctx: PanelToolsContext): PanelTools {
       return alignment ? hasStraightRuns(alignment) : false;
     },
     onChanged: ctx.refresh,
+    onModeChange: (mode) => freeView.mount(lastGeom, mode === "free"),
+    freeHint: () => free.hint(),
+    mountOverlay: (geom) => {
+      lastGeom = geom;
+      freeView.mount(geom, tools.mode() === "free");
+    },
   });
 
   /** 그래프에서 누른 자리를 도구가 먹는다. */
   function handleToolPick(chainageM: number | null): boolean {
     const mode = tools.mode();
     if (mode === "none") return false;
+    if (mode === "free") return true; // 자유지정 클릭은 오버레이가 먼저 먹는다.
     if (chainageM === null) return tools.handleRunPick(null);
     const alignment = ctx.alignment();
     if (mode === "shift") {
@@ -284,6 +305,12 @@ export function createPanelTools(ctx: PanelToolsContext): PanelTools {
     // 입력칸 안에서는 방향키가 값 조작이므로 손대지 않는다.
     if (target && target.closest("input, select, textarea")) return;
     const key = event.key;
+    // [자유지정] 중 Enter 끝 · Esc 취소 · Backspace 점 빼기 — 단추 초점의 Enter 누름도 막는다.
+    if (tools.mode() === "free" && free.key(key)) {
+      event.preventDefault();
+      freeView.redraw();
+      return;
+    }
     if (isCtrlKey(event, "z")) {
       event.preventDefault();
       flushHold();
diff --git a/B05_Profile/B05_Profile_UI_Profile_Render.ts b/B05_Profile/B05_Profile_UI_Profile_Render.ts
index b7f45b834..af5042efd 100644
--- a/B05_Profile/B05_Profile_UI_Profile_Render.ts
+++ b/B05_Profile/B05_Profile_UI_Profile_Render.ts
@@ -34,7 +34,7 @@ import {
   Y_AXIS_WINDOW_CLASS,
   type ElevationWindowResult,
 } from "@util/common_util_chart_ywindow";
-import type { StraightRun } from "./B05_Profile_UI_Profile_Straighten";
+import type { ProfileTools } from "./B05_Profile_UI_Profile_Tools";
 import type { MinCoverPoint } from "./B05_Profile_UI_Profile_MinCover";
 import { buildStickyYAxis, type RouteMassHaulDrawParams } from "./B05_Profile_UI_Profile_MassHaul";
 import type { ProfileZoomState } from "./B05_Profile_UI_Profile_Zoom";
@@ -106,8 +106,8 @@ export interface ProfileRenderContext {
   ) => { min: number; max: number } | undefined;
   /** 그래프 x → chainage 역변환이 필요한 도구 판정용 — 클릭 지점의 누가거리. */
   toolActive: () => boolean;
-  /** [쉬프트]로 고른 직선 구간 — 그래프에 빨갛게 강조한다(2026-09-03). */
-  selectedRuns: () => StraightRun[];
+  /** [쉬프트]로 고른 직선 구간(빨간 강조) · [자유지정] 오버레이(215-1). */
+  tools: Pick<ProfileTools, "selectedRuns" | "mountOverlay">;
   stationIdAtStructure: (structureId: string | null) => string | null;
   /** 알약을 골랐을 때처럼 그리는 도중 다시 그려야 하는 자리. */
   redraw: () => void;
@@ -368,7 +368,7 @@ export function renderProfile(ctx: ProfileRenderContext): void {
   if (alignment) {
     const highlight = createRunHighlight({
       alignment,
-      runs: ctx.selectedRuns(),
+      runs: ctx.tools.selectedRuns(),
       x,
       axis: yAxis,
       widthPx: width,
@@ -403,6 +403,16 @@ export function renderProfile(ctx: ProfileRenderContext): void {
   canvas.append(chartWrap, structureLane);
   body.replaceChildren(canvas);
   body.scrollLeft = scrollLeft;
+  // [자유지정] — 범위 강조 · 점선 미리 보기 · 클릭 점(215-1). 화면에 붙인 뒤라야 자리를 잰다.
+  ctx.tools.mountOverlay({
+    chart: chartWrap,
+    scroller: body,
+    x,
+    toChainage,
+    widthPx: width,
+    heightPx: chartHeight,
+    stations: graphLongitudinal.stations.map((station) => station.chainage_m),
+  });
   // 테이블은 바닥 고정 오버레이에 담는다 — 폭은 종단 캔버스와 같아 세로선이 맞물린다.
   if (table) table.style.width = `${width}px`;
   tableOverlay.setTable(table);
diff --git a/B05_Profile/B05_Profile_UI_Profile_Straighten.ts b/B05_Profile/B05_Profile_UI_Profile_Straighten.ts
index 5b9279de8..74bc054e7 100644
--- a/B05_Profile/B05_Profile_UI_Profile_Straighten.ts
+++ b/B05_Profile/B05_Profile_UI_Profile_Straighten.ts
@@ -46,7 +46,7 @@ function pviChainages(alignment: ProfileAlignment): number[] {
 }
 
 /** 자동 선형(base_pvi) 위에서의 표고 — 편집 델타의 기준값. */
-function baseElevationAt(base: AlignmentBase, chainageM: number): number {
+export function baseElevationAt(base: AlignmentBase, chainageM: number): number {
   const nodes = base.basePvi;
   if (!nodes.length) return 0;
   if (chainageM <= nodes[0].chainage_m) return nodes[0].elevation_m;
@@ -181,7 +181,7 @@ export function straightenBetween(
 }
 
 /** 정책에서 라운드 기본 길이 L(m)을 읽는다 — 옛 저장분은 R 기준으로 되돌아간다. */
-function defaultCurveLength(base: AlignmentBase, deltaGrade: number): number {
+export function defaultCurveLength(base: AlignmentBase, deltaGrade: number): number {
   const length = base.policy.default_curve_length_m;
   if (typeof length === "number" && Number.isFinite(length) && length > 0) return length;
   return base.policy.default_curve_radius_m * Math.abs(deltaGrade);
diff --git a/B05_Profile/B05_Profile_UI_Profile_Tools.ts b/B05_Profile/B05_Profile_UI_Profile_Tools.ts
index fd33a05ff..420d00159 100644
--- a/B05_Profile/B05_Profile_UI_Profile_Tools.ts
+++ b/B05_Profile/B05_Profile_UI_Profile_Tools.ts
@@ -11,12 +11,14 @@
  *   [쉬프트] → 직선화된 라인을 고름(여러 개 가능) → [▲][▼]로 통째로 올리고 내림.
  *   직선을 고른 채 [직선화] 모드에서 [▲][▼]를 누르면 그 직선이 꺾이며 가운데에
  *   라운드가 생기고 양쪽이 탄젠트 직선이 된다.
+ *   [자유지정] → 범위를 고르고 클릭으로 계획선을 잇는다(`design_profile_free` 몫 · 215-1).
  * ========================================================================== */
 
 import type { StraightRun } from "./B05_Profile_UI_Profile_Straighten";
 import { sameRun } from "./B05_Profile_UI_Profile_Straighten";
+import type { FreeChartGeom } from "../A00_Common/design/design_profile_free_view";
 
-export type ProfileToolMode = "none" | "straighten" | "shift";
+export type ProfileToolMode = "none" | "straighten" | "shift" | "free";
 
 export interface ProfileToolsCallbacks {
   /** 두 측점을 직선으로 잇는다. */
@@ -36,6 +38,12 @@ export interface ProfileToolsCallbacks {
   hasStraightRuns: () => boolean;
   /** 선택 표시를 갱신해야 할 때(모드·선택 변화) 호출된다. */
   onChanged: () => void;
+  /** 모드가 바뀜 — [자유지정] 오버레이를 붙이고 뗀다. */
+  onModeChange: (mode: ProfileToolMode) => void;
+  /** [자유지정] 단계 안내. */
+  freeHint: () => string;
+  /** 그래프를 새로 그림 — [자유지정] 오버레이를 다시 붙인다. */
+  mountOverlay: (geom: FreeChartGeom) => void;
 }
 
 export interface ProfileTools {
@@ -54,6 +62,8 @@ export interface ProfileTools {
   nudge: (delta: number) => boolean;
   /** 모드·선택을 모두 끈다. */
   clear: () => void;
+  /** 그래프를 새로 그릴 때마다 — [자유지정] 오버레이 자리. */
+  mountOverlay: (geom: FreeChartGeom) => void;
 }
 
 function toolButton(label: string, title: string, onClick: () => void): HTMLButtonElement {
@@ -78,6 +88,7 @@ export function createProfileTools(callbacks: ProfileToolsCallbacks): ProfileToo
     mode = "none";
     pending = null;
     runs = [];
+    callbacks.onModeChange(mode);
   }
 
   function setMode(next: ProfileToolMode): void {
@@ -87,6 +98,7 @@ export function createProfileTools(callbacks: ProfileToolsCallbacks): ProfileToo
       mode = next;
       pending = null;
       runs = [];
+      callbacks.onModeChange(mode);
     }
     callbacks.onChanged();
   }
@@ -106,6 +118,7 @@ export function createProfileTools(callbacks: ProfileToolsCallbacks): ProfileToo
     nudge: step,
     selectedRuns: () => runs,
     pendingStation: () => pending,
+    mountOverlay: callbacks.mountOverlay,
     clear() {
       if (mode === "none" && pending === null && !runs.length) return;
       reset();
@@ -174,15 +187,26 @@ export function createProfileTools(callbacks: ProfileToolsCallbacks): ProfileToo
         () => setMode("shift"),
       );
       shift.classList.toggle("is-active", mode === "shift");
+      const free = toolButton(
+        "자유지정",
+        "범위를 고른 뒤 클릭으로 계획선을 잇습니다 (Enter 끝 · Backspace 점 빼기 · Esc 취소)",
+        () => setMode("free"),
+      );
+      free.classList.toggle("is-active", mode === "free");
 
       const up = toolButton("▲", "고른 직선을 0.1m 올림", () => void step(0.1));
       const down = toolButton("▼", "고른 직선을 0.1m 내림", () => void step(-0.1));
-      const idle = mode === "none" || (!runs.length && mode === "shift");
+      const idle = mode === "none" || mode === "free" || (!runs.length && mode === "shift");
       up.disabled = idle || (mode === "straighten" && runs.length !== 1);
       down.disabled = up.disabled;
 
-      wrap.append(reset, undo, redo, straighten, shift, up, down);
-      if (mode === "straighten" && pending !== null) {
+      wrap.append(reset, undo, redo, straighten, free, shift, up, down);
+      if (mode === "free") {
+        const hint = document.createElement("em");
+        hint.className = "b05-route-profile__tool-hint";
+        hint.textContent = callbacks.freeHint();
+        wrap.append(hint);
+      } else if (mode === "straighten" && pending !== null) {
         const hint = document.createElement("em");
         hint.className = "b05-route-profile__tool-hint";
         hint.textContent = `${pending.toFixed(1)}m 선택 — 두 번째 측점을 고르세요 (취소는 [직선화] 다시 누르기)`;
diff --git a/B05_Profile/B05_Profile_UI_Style_Table.css b/B05_Profile/B05_Profile_UI_Style_Table.css
index 91e5bfd69..6584eb291 100644
--- a/B05_Profile/B05_Profile_UI_Style_Table.css
+++ b/B05_Profile/B05_Profile_UI_Style_Table.css
@@ -334,6 +334,56 @@
   opacity: 0.5;
 }
 
+/* [자유지정] 오버레이 — 범위 띠 · 지나온 점선 · 마우스까지 미리 보기 · 기울기 글(215-1).
+   기준 기울기를 넘는 구간은 빨강. 클릭은 그래프 래퍼가 받으므로 오버레이는 마우스를 통과시킨다. */
+.b05-profile-freemark {
+  position: absolute;
+  z-index: 5;
+  inset: 0;
+  pointer-events: none;
+}
+
+.b05-profile-freemark__band {
+  fill: color-mix(in srgb, var(--color-primary) 10%, transparent);
+}
+
+.b05-profile-freemark__edge {
+  stroke: var(--color-primary);
+  stroke-width: 1.5;
+}
+
+.b05-profile-freemark__line {
+  stroke: var(--color-primary);
+  stroke-width: 2;
+  stroke-dasharray: 6 4;
+}
+
+.b05-profile-freemark__line.is-preview {
+  opacity: 0.7;
+}
+
+.b05-profile-freemark__line.is-over {
+  stroke: var(--color-danger, #d64545);
+}
+
+.b05-profile-freemark__dot {
+  fill: var(--color-surface);
+  stroke: var(--color-primary);
+  stroke-width: 1.5;
+}
+
+.b05-profile-freemark__grade {
+  fill: var(--color-text);
+  font-size: var(--text-caption);
+  paint-order: stroke;
+  stroke: var(--color-surface);
+  stroke-width: 3px;
+}
+
+.b05-profile-freemark__grade.is-over {
+  fill: var(--color-danger, #d64545);
+}
+
 .b05-profile-edit {
   position: absolute;
   z-index: 4;
diff --git a/B06_Section/B06_Section_UI_Style_Cross.css b/B06_Section/B06_Section_UI_Style_Cross.css
index 494c58df0..6bd6c56e3 100644
--- a/B06_Section/B06_Section_UI_Style_Cross.css
+++ b/B06_Section/B06_Section_UI_Style_Cross.css
@@ -124,7 +124,8 @@
 }
 
 /* 알림 줄(138-3) — 카드 칸 맨 위 고정 · 알림 없어도 줄 유지 · 오른쪽 끝 열 수 칸.
-   위 여백(카드 칸 padding)만큼 끌어올려 그 틈으로 카드가 비치지 않게 */
+   위 여백(카드 칸 padding)만큼 끌어올려 그 틈으로 카드가 비치지 않게.
+   217-1 — 칩 줄 위 여백 16→8 · 칩 줄 ↔ 첫 카드 28→16(카드 칸 gap 24 에서 8 을 당김) */
 .b06-section__notice-bar {
   position: sticky;
   top: calc(-1 * var(--spacing-16));
@@ -132,8 +133,8 @@
   display: flex;
   align-items: flex-start;
   gap: var(--spacing-8);
-  margin-top: calc(-1 * var(--spacing-16));
-  padding-block: var(--spacing-16) var(--spacing-4);
+  margin-block: calc(-1 * var(--spacing-16)) calc(-1 * var(--spacing-8));
+  padding-block: var(--spacing-8) 0;
   background: var(--color-bg);
 }
 
diff --git a/B07_DesignDetail/B07_DesignDetail_Api_Fetch.ts b/B07_DesignDetail/B07_DesignDetail_Api_Fetch.ts
index 696c3f773..2efd5bcc4 100644
--- a/B07_DesignDetail/B07_DesignDetail_Api_Fetch.ts
+++ b/B07_DesignDetail/B07_DesignDetail_Api_Fetch.ts
@@ -41,6 +41,8 @@ export interface CadDrawing {
   stale_layout?: boolean;
   /** 횡단 장 — 지금과 다른 표 · 글 배율로 확정된 저장본(180-2). */
   stale_scale?: boolean;
+  /** 횡단 장 — 측점 도면층(212-2) 앞에 확정된 저장본. [수정]을 누르면 측점 층으로 다시 만든다. */
+  stale_layers?: boolean;
   layers: {
     id: string;
     name: string;
diff --git a/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py b/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py
index e2b8d5eb5..1dc94c77b 100644
--- a/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py
+++ b/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py
@@ -5,6 +5,8 @@
 칸 가운데 · 작성 척도 1/100 그대로(큰 단면이 칸을 넘으면 겹침 — 사용자 배치로 고침).
 칸 = 인쇄되는 표 격자선 · 블록 테두리 없음 · 칸보다 큰 단면은 `overflow_cells`(169-2).
 칸 안 = 표를 칸 아래 가운데에 먼저 · 그 위 글 · 그림(도로 중심 = 칸 가운데)(174-1).
+측점마다 도면층 하나(「횡단 No.3」) = 원지반 · 계획선 · 구조물 · 암 그림 · 종류는 색 · 선 꼴
+· 표 · 글은 수량표 층(212-2).
 """
 
 import re
@@ -52,6 +54,10 @@ CROSS_SHEET_ID = re.compile(r"cross_s(\d{2,}(?:\.\d{2})?)m?")
 _BORDER_PAD_MM = CROSS_BORDER_PAD_MM
 # 칸 아래선 ~ 표 아래선 여백(mm) — 같은 행 표가 한 높이(174-1)
 CELL_TABLE_PAD_MM = 5.0
+# 측점 도면층 id 머리(212-2) — 뒤에 측점 · DXF 층 이름도 이 id
+STATION_LAYER_PREFIX = "b08-station-"
+# 측점 층으로 옮길 그림 종류 층 — 표 · 글(수량표 층)은 그대로
+_DRAWING_LAYER_IDS = {GROUND_LAYER_ID, DESIGN_LAYER_ID, STRUCTURE_LAYER_ID, ROCK_LAYER_ID}
 
 
 def _design_points(design_line: list[Any] | None) -> list[tuple[float, float]]:
@@ -178,11 +184,20 @@ def _grid_lines(sheet_id: str, cols: int, rows: int) -> list[dict[str, Any]]:
     ]
 
 
+def _move_to_layer(entity: dict[str, Any], layer_id: str) -> None:
+    """그림 종류 층 개체(자식 선까지)를 측점 층으로 — id 는 그대로(212-2)."""
+    if entity.get("layerId") in _DRAWING_LAYER_IDS:
+        entity["layerId"] = layer_id
+        for child in entity.get("children") or []:
+            child["layerId"] = layer_id
+
+
 def build_cross_sheet(sheet: dict[str, Any], sections: list[dict[str, Any]]) -> dict[str, Any]:
     """한 장을 만든다. sections는 이 장에 담을 측점 입력들(배치 순서대로)."""
     entities: list[dict[str, Any]] = []
     placements: list[dict[str, Any]] = []
     overflow: list[list[float]] = []
+    station_layers: list[dict[str, Any]] = []
     slots = sheet.get("slots") or []
     cols, rows = sheet.get("grid") or (4, 4)
     usable_w, usable_h = usable_area()
@@ -222,8 +237,17 @@ def build_cross_sheet(sheet: dict[str, Any], sections: list[dict[str, Any]]) ->
         group_id = str(uuid5(_ENTITY_NS, f"{seed_id}:group"))
         for entity in placed["entities"]:
             entity["groupId"] = group_id
+        # 측점 도면층(212-2) — 층 관리에서 그 측점 그림만 고르기 · 켜고 끄기 · 잠그기
+        layer_id = f"{STATION_LAYER_PREFIX}{section['chainage']}"
+        title = section.get("title") or f"{section['chainage']}"
+        station_layers.append(_layer(layer_id, f"횡단 {title}"))
+        design_ids = [e["id"] for e in placed["entities"] if e["layerId"] == DESIGN_LAYER_ID]
+        for entity in placed["entities"]:
+            _move_to_layer(entity, layer_id)
         for placement in placed.get("cross_placements") or []:
             placement["group_id"] = group_id
+            placement["layer_id"] = layer_id
+            placement["design_ids"] = design_ids  # 화면이 다시 그려 갈아 끼울 서버 설계선
         entities.extend(placed["entities"])
         placements.extend(placed.get("cross_placements") or [])
 
@@ -246,10 +270,7 @@ def build_cross_sheet(sheet: dict[str, Any], sections: list[dict[str, Any]]) ->
         # 칸보다 큰 단면의 칸 [x0, y0, x1, y1] — 라우터가 CAD 가이드 붉은 틀로 보냄(169-2)
         "overflow_cells": overflow,
         "layers": [
-            _layer(GROUND_LAYER_ID, "원지반"),
-            _layer(DESIGN_LAYER_ID, "계획선"),
-            _layer(STRUCTURE_LAYER_ID, "구조물"),
-            _layer(ROCK_LAYER_ID, "암 경계선"),
+            *station_layers,
             _layer(CROSS_TABLE_LAYER_ID, "수량 산출표"),
             _layer(FRAME_LAYER_ID, "도각", locked=True),
         ],
diff --git a/B07_DesignDetail/B07_DesignDetail_Router_Support.py b/B07_DesignDetail/B07_DesignDetail_Router_Support.py
index 8932f7cd2..a351e69c7 100644
--- a/B07_DesignDetail/B07_DesignDetail_Router_Support.py
+++ b/B07_DesignDetail/B07_DesignDetail_Router_Support.py
@@ -18,6 +18,7 @@ from B05_Profile.B05_Profile_Engine_Sections import (
 from B06_Section.B06_Section_Engine_Design import compute_cross_design, curve_widening_args
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
     DRAWING_FORMAT,
+    GROUND_LAYER_ID,
     build_cross_drawing,
     infer_station_interval,
     station_no_label,
@@ -32,6 +33,7 @@ from B07_DesignDetail.B07_DesignDetail_Engine_Cad_MassHaul import build_mass_hau
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad_PlanKinds import build_plan_kind_drawing
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
     CROSS_SHEET_ID,
+    STATION_LAYER_PREFIX,
     build_cross_sheet,
     plan_cross_sheets,
 )
@@ -462,12 +464,22 @@ def _read_drawing(
             else:
                 kind = "longitudinal" if _LONG_ID.fullmatch(drawing_id) else "cross"
             label = str(manifest_entry.get("label") or drawing_id)
+            layers = [layer for layer in saved.get("layers") or [] if isinstance(layer, dict)]
+            if kind == "cross":
+                # 180-1 앞 확정본 = 원지반 층 잠금째 저장 — 열 때 풂(212-1)
+                for layer in layers:
+                    if layer.get("id") == GROUND_LAYER_ID:
+                        layer["isLocked"] = False
             if kind == "cross" and manifest_entry.get("layout") != CROSS_SHEET_LAYOUT:
                 saved["stale_layout"] = True  # 화면이 [수정] → 새 배치로 다시 만들기를 안내
             elif kind == "cross" and drawing_id.startswith("cross_s"):
                 scale = read_cross_layout(project_root)["table_scale"]
                 if manifest_entry.get("table_scale", 1.0) != scale:
                     saved["stale_scale"] = True  # 옛 배율로 확정한 장 — 그대로 두고 안내(180-2)
+                elif not any(
+                    str(layer.get("id")).startswith(STATION_LAYER_PREFIX) for layer in layers
+                ):
+                    saved["stale_layers"] = True  # 측점 층 앞 확정본 — [수정] 때 측점 층(212-2)
             stored_table = manifest_entry.get("quantity_table")
             table = stored_table if kind == "cross" and isinstance(stored_table, dict) else None
             return kind, label, saved, True, table
diff --git a/B07_DesignDetail/B07_DesignDetail_UI_Cad_Structures.ts b/B07_DesignDetail/B07_DesignDetail_UI_Cad_Structures.ts
index f0e55d6ba..c4e446c65 100644
--- a/B07_DesignDetail/B07_DesignDetail_UI_Cad_Structures.ts
+++ b/B07_DesignDetail/B07_DesignDetail_UI_Cad_Structures.ts
@@ -34,6 +34,16 @@ export interface CrossPlacement {
   frame?: number[];
   /** 측점 한 벌 묶음(180-1) — 덧그림도 같은 묶음으로 함께 골라짐. */
   group_id?: string;
+  /** 측점 도면층(212-2) — 덧그림도 그 층에. */
+  layer_id?: string;
+  /** 갈아 끼울 서버 설계선 id(212-2) — 측점 층이면 층으로는 못 가림. */
+  design_ids?: string[];
+}
+
+/** 개체(자식 선까지)를 측점 층으로(212-2). */
+function moveToLayer(entity: Entity, layerId: string): void {
+  entity.layerId = layerId;
+  for (const child of (entity.children as Entity[] | undefined) ?? []) moveToLayer(child, layerId);
 }
 
 /** 측점과 도면 배치를 같은 자리로 볼 허용 오차(m). 정본이 누가거리를 0.01m로 끊어 쓴다. */
@@ -62,6 +72,7 @@ export async function appendStructureEntities(
   let added = 0;
   const fresh: Entity[] = [];
   const replaced: number[][] = [];
+  const designIds = new Set<string>();
   for (const placement of placements) {
     const section = sections.find(
       (item) => Math.abs(item.chainage_m - placement.chainage_m) <= CHAINAGE_TOLERANCE_M,
@@ -81,6 +92,8 @@ export async function appendStructureEntities(
     }
     if (!entities.length) continue;
     if (placement.group_id) for (const entity of entities) entity.groupId = placement.group_id;
+    if (placement.layer_id) for (const entity of entities) moveToLayer(entity, placement.layer_id);
+    for (const id of placement.design_ids ?? []) designIds.add(id);
     // 이 블록 설계선은 우리가 다시 그렸다 — 서버가 낸 트림 전 설계선은 걷어낸다.
     replaced.push(frame);
     fresh.push(...entities);
@@ -89,7 +102,7 @@ export async function appendStructureEntities(
   if (replaced.length) {
     // 걷어내기는 새 엔티티를 넣기 **전에** 한다 — 뒤에 하면 우리 것까지 같이 지운다.
     drawing.entities = drawing.entities.filter((entity) => {
-      if (entity.layerId !== DESIGN_LAYER_ID) return true;
+      if (entity.layerId !== DESIGN_LAYER_ID && !designIds.has(entity.id as string)) return true;
       const box = entityBox(entity);
       if (!box) return true;
       return !replaced.some(
diff --git a/B07_DesignDetail/B07_DesignDetail_UI_Page.ts b/B07_DesignDetail/B07_DesignDetail_UI_Page.ts
index 22499e06f..4ee7d0a34 100644
--- a/B07_DesignDetail/B07_DesignDetail_UI_Page.ts
+++ b/B07_DesignDetail/B07_DesignDetail_UI_Page.ts
@@ -365,6 +365,11 @@ export async function renderB07DesignDetail(root: HTMLElement): Promise<void> {
           "옛 표 배율로 확정된 장입니다. [수정]을 누르면 지금 배율로 다시 만듭니다.",
           "info",
         );
+      } else if (response.drawing.stale_layers) {
+        showToast(
+          "측점 도면층 앞에 확정된 장입니다. [수정]을 누르면 측점마다 층(횡단 No.)으로 다시 만듭니다.",
+          "info",
+        );
       }
     } catch (error) {
       cad.fail(error instanceof Error ? error.message : "CAD 도면을 불러오지 못했습니다.");
diff --git a/B07_DesignDetail/B07_DesignDetail_UI_Panels.ts b/B07_DesignDetail/B07_DesignDetail_UI_Panels.ts
index 0f214f7c5..68426a2fa 100644
--- a/B07_DesignDetail/B07_DesignDetail_UI_Panels.ts
+++ b/B07_DesignDetail/B07_DesignDetail_UI_Panels.ts
@@ -185,8 +185,9 @@ export interface CrossLayoutExtras {
 }
 
 /**
- * 횡단 장 배치 칸(140-3 · 153-1) — 「배치 열 [4] 행 [4] [이 장] [모든 장]」 + 「표 배율 [1] [적용]」.
- * `onApply` 가 없으면(장이 아닌 도면) [이 장]을 끔.
+ * 횡단 장 배치 칸(140-3 · 153-1) — 줄마다 한 일(212-3):
+ * 「배치 열 [4] 행 [4]」 · 「[이 장] [모든 장]」 · 「표 배율 [1] [배율 적용]」 · (부르는 쪽이 붙이는 [안내선 숨기기]).
+ * 단추 · 숫자 칸 = 줄 위 작은 단추 한 규격(`--btn-bar-*`) · `onApply` 가 없으면(장이 아닌 도면) [이 장]을 끔.
  */
 export function buildCrossLayoutControls(
   grid: [number, number],
@@ -196,6 +197,12 @@ export function buildCrossLayoutControls(
 ): HTMLElement {
   const box = document.createElement("div");
   box.className = "b07-cross-layout";
+  const row = (...items: HTMLElement[]): HTMLElement => {
+    const line = document.createElement("div");
+    line.className = "b07-cross-layout__row";
+    line.append(...items);
+    return line;
+  };
   const number = (value: number, label: string) =>
     createInputField({
       label,
@@ -227,10 +234,11 @@ export function buildCrossLayoutControls(
     return button;
   };
   box.append(
-    cols.root,
-    rows.root,
-    action("이 장", "이 장만 이 배치로", onApply),
-    action("모든 장", "모든 장을 이 배치로(장마다 값 지움)", onAllDefault),
+    row(cols.root, rows.root),
+    row(
+      action("이 장", "이 장만 이 배치로", onApply),
+      action("모든 장", "모든 장을 이 배치로(장마다 값 지움)", onAllDefault),
+    ),
   );
   if (extras.scale) {
     const { onApply: applyScale } = extras.scale;
@@ -255,7 +263,7 @@ export function buildCrossLayoutControls(
       },
     });
     button.title = "모든 장의 표 · 표 위 글 크기(기본 1)";
-    box.append(scale.root, button);
+    box.append(row(scale.root, button));
   }
   return box;
 }
diff --git a/B07_DesignDetail/B07_DesignDetail_UI_Style.css b/B07_DesignDetail/B07_DesignDetail_UI_Style.css
index e99f64b41..71c501fb3 100644
--- a/B07_DesignDetail/B07_DesignDetail_UI_Style.css
+++ b/B07_DesignDetail/B07_DesignDetail_UI_Style.css
@@ -225,8 +225,9 @@
   color: var(--color-text-muted);
 }
 
-/* 횡단 장 배치(153-1) — 횡단도 묶음 맨 아래 전체 폭: 배치 열 [4] 행 [4] [이 장] [모든 장].
-   좌측이 182px 까지 줄어드니 줄바꿈 허용 · 공용 칸의 오류 자리는 접음. */
+/* 횡단 장 배치(153-1 · 212-3) — 횡단도 묶음 맨 아래 전체 폭 · 한 줄에 한 일:
+   배치 열 · 행 / [이 장] [모든 장] / 표 배율 [배율 적용] / [안내선 숨기기].
+   단추 · 숫자 칸 = 줄 위 작은 단추 한 규격(`--btn-bar-*` · 높이 16) · 한 줄 안 같은 너비 · 오류 자리는 접음. */
 .b07-cross-layout-slot {
   grid-column: 1 / -1;
 }
@@ -237,25 +238,45 @@
 
 .b07-cross-layout {
   display: flex;
-  flex-wrap: wrap;
-  align-items: center;
-  gap: var(--spacing-4) var(--spacing-8);
+  flex-direction: column;
+  gap: var(--spacing-4);
 }
 
-.b07-cross-layout > .ui-field {
+.b07-cross-layout__row {
+  display: flex;
+  align-items: center;
+  gap: var(--spacing-8);
+}
+
+.b07-cross-layout__row > * {
+  flex: 1 1 0;
+  min-width: 0;
+}
+
+.b07-cross-layout .ui-field {
   display: flex;
   flex-direction: row;
   align-items: center;
   gap: var(--spacing-4);
 }
 
+.b07-cross-layout .ui-btn,
+.b07-cross-layout .ui-field .ui-input {
+  height: auto;
+  padding: var(--btn-bar-padding);
+  font-size: var(--btn-bar-font-size);
+  line-height: 1;
+}
+
 .b07-cross-layout .ui-field__label {
   margin: 0;
+  font-size: var(--btn-bar-font-size);
   white-space: nowrap;
 }
 
-.b07-cross-layout .ui-input {
-  width: 48px;
+.b07-cross-layout .ui-field .ui-input {
+  width: 100%;
+  min-width: 0;
 }
 
 .b07-cross-layout .ui-field__error {
diff --git a/resources/tester/helper_215_1_free_profile.cjs b/resources/tester/helper_215_1_free_profile.cjs
new file mode 100644
index 000000000..7944663cf
--- /dev/null
+++ b/resources/tester/helper_215_1_free_profile.cjs
@@ -0,0 +1,175 @@
+/* 215-1 종단 [자유지정] 단위검증 헬퍼 — `design_profile_free.ts` 를 그 자리에서 트랜스파일해
+ * 범위 · 시작 이음 · 세로선 붙음 · 높이 변환 · 미리 보기 · 기울기 판정 · 종단곡선 · 끝 이음 ·
+ * Esc · Backspace · 적용 편집을 Node 로 돌린다.
+ */
+const fs = require("fs");
+const path = require("path");
+const ts = require(path.join(__dirname, "..", "..", "config", "node_modules", "typescript"));
+
+const ROOT = path.join(__dirname, "..", "..");
+const cache = new Map();
+function loadTs(file) {
+  const full = path.resolve(file);
+  if (cache.has(full)) return cache.get(full);
+  const js = ts.transpileModule(fs.readFileSync(full, "utf8"), {
+    compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
+  }).outputText;
+  const box = { exports: {} };
+  cache.set(full, box.exports);
+  const localRequire = (request) => {
+    if (request.startsWith(".")) return loadTs(path.join(path.dirname(full), `${request}.ts`));
+    return require(request);
+  };
+  new Function("exports", "module", "require", js)(box.exports, box, localRequire);
+  cache.set(full, box.exports);
+  return box.exports;
+}
+
+const free = loadTs(path.join(ROOT, "A00_Common", "design", "design_profile_free.ts"));
+const align = loadTs(path.join(ROOT, "B05_Profile", "B05_Profile_UI_Profile_Alignment.ts"));
+
+// 전체 측점 폴리라인(20m 간격 · 0~200m) — 계획고 = 지반고, 마디마다 기울기가 다르다.
+const stations = Array.from({ length: 11 }, (_, i) => i * 20);
+const ground = stations.map((s, i) => 100 + 0.3 * i + (i % 2 ? 0.4 : 0));
+const base = {
+  policy: {
+    station_interval_m: 20,
+    curve_radius_ratio: 1,
+    curve_tangent_max_ratio: 0.5,
+    curve_skip_legal_exception: false,
+    default_curve_length_m: 20,
+    default_curve_radius_m: 300,
+    balance_tolerance_percent: 10,
+    edit_step_m: 0.1,
+    grade_violation_policy: "warn",
+    max_grade_pct: 14,
+    curve_skip_delta_pct: 0,
+    paved: true,
+  },
+  onlyExplicitCurves: true,
+  basePvi: stations.map((s, i) => ({ chainage_m: s, elevation_m: ground[i] })),
+  chainage: stations,
+  ground,
+  stations: stations.map((s) => ({ station_id: `S${s}`, chainage_m: s })),
+};
+
+function harness() {
+  let edits = align.emptyEdits();
+  const log = { applied: [], closed: 0, changed: 0 };
+  const draw = free.createFreeDraw({
+    base: () => base,
+    alignment: () => align.buildAlignment(base, edits),
+    edits: () => edits,
+    apply: (next) => {
+      log.applied.push(next);
+      edits = next;
+    },
+    close: () => (log.closed += 1),
+    changed: () => (log.changed += 1),
+  });
+  return { draw, log, edits: () => edits };
+}
+
+const out = {};
+const z0 = (s) => ground[stations.indexOf(s)];
+
+// ① 높이 변환 — 세로 창(기준 + 지금 변환) 왕복 · 변환 글 읽기.
+const view = { center: 100, pxPerM: 10, zero: 150, scale: 1.2, offset: -20 };
+out.yAt103_2 = free.chartYAtElevation(view, 103.2);
+out.zBack = free.elevationAtChartY(view, out.yAt103_2);
+out.parsed = free.parseWindowTransform("translate(0 -20) scale(1 1.2)");
+out.parsedNone = free.parseWindowTransform(null);
+
+// ② 세로선 붙음 — 가장 가까운 측점 · 범위 안만.
+out.snap79 = free.snapStation(stations, 79);
+out.snapOutside = free.snapStation(stations, 190, [40, 160]);
+
+// ③ 범위 → 시작 이음 → 점 → 미리 보기 → 끝 이음.
+{
+  const { draw, log, edits } = harness();
+  draw.click(41, 0, stations); // 범위 첫 세로선(40)
+  out.pendingEdges = draw.marks().edges;
+  draw.click(158, 0, stations); // 범위 끝(160)
+  out.rangePhase = draw.phase();
+  out.band = draw.marks().band;
+  draw.click(100, 105, stations); // 범위 가운데 — 시작 아님
+  out.stillArmed = draw.phase();
+  draw.click(43, 999, stations); // 시작 세로선 근처 — 그 측점 계획고에 이어 시작
+  out.startPhase = draw.phase();
+  out.startDot = draw.marks().dots[0];
+  draw.click(79, 103.456, stations); // 80 에 붙고 높이는 클릭 높이(0.01 단위)
+  out.point1 = draw.marks().dots[1];
+  draw.click(61, 90, stations); // 뒤로 가는 클릭 — 무시
+  out.dotsAfterBack = draw.marks().dots.length;
+  draw.hover({ chainageM: 121, elevationM: 101.2, stations });
+  out.preview = draw.marks().segments.map((s) => ({
+    to: s.to,
+    grade: Number(s.grade_pct.toFixed(4)),
+    over: s.over,
+    preview: s.preview,
+  }));
+  draw.hover({ chainageM: 121, elevationM: 80, stations }); // 기울기 넘음
+  const steep = draw.marks().segments.at(-1);
+  out.steep = { grade: Number(steep.grade_pct.toFixed(2)), over: steep.over };
+  draw.click(121, 101.2, stations);
+  draw.hover({ chainageM: 157, elevationM: 50, stations }); // 끝 세로선 → 그 계획고로 이음
+  out.finishPreview = draw.marks().segments.at(-1).to;
+  out.hint = draw.hint();
+  draw.click(157, 50, stations); // 끝 세로선 근처 = 끝
+  out.appliedCount = log.applied.length;
+  out.closed = log.closed;
+  out.afterPhase = draw.phase();
+  const next = edits();
+  out.offsetKeys = Object.keys(next.station_offsets).sort();
+  out.radiiKeys = Object.keys(next.curve_radii).sort();
+  const built = align.buildAlignment(base, next);
+  const pvi = (s) => built.pvi.find((n) => Math.abs(n.chainage_m - s) < 1e-6).elevation_m;
+  out.pvi = { 40: pvi(40), 60: pvi(60), 80: pvi(80), 100: pvi(100), 120: pvi(120), 140: pvi(140), 160: pvi(160) };
+  out.ground = { 40: z0(40), 160: z0(160) };
+  const g1 = (103.46 - z0(40)) / 40;
+  const g2 = (101.2 - 103.46) / 40;
+  out.expectR80 = Number((20 / Math.abs(g2 - g1)).toFixed(6));
+  out.r80 = next.curve_radii["80.000"];
+  out.curve80L = built.curves.find((c) => Math.abs(c.chainage_m - 80) < 1e-6)?.l_m ?? null;
+  out.outsideUntouched = !("20.000" in next.station_offsets) && !("180.000" in next.station_offsets);
+}
+
+// ④ Enter = 끝(마지막 점 → 끝 세로선) · 끝 세로선에서 거꾸로 시작.
+{
+  const { draw, log, edits } = harness();
+  draw.click(40, 0, stations);
+  draw.click(160, 0, stations);
+  draw.click(162, 0, stations); // 끝 쪽 세로선에서 시작
+  out.reverseAnchor = draw.marks().dots[0].chainage_m;
+  draw.click(100, 104, stations);
+  out.enter = draw.key("Enter");
+  out.enterApplied = log.applied.length;
+  const built = align.buildAlignment(base, edits());
+  const pvi = (s) => built.pvi.find((n) => Math.abs(n.chainage_m - s) < 1e-6).elevation_m;
+  out.enterPvi = { 40: pvi(40), 60: pvi(60), 100: pvi(100), 140: pvi(140), 160: pvi(160) };
+}
+
+// ⑤ Esc = 취소(편집 없음) · Backspace = 마지막 점 빼기.
+{
+  const { draw, log } = harness();
+  draw.click(40, 0, stations);
+  draw.click(160, 0, stations);
+  draw.click(40, 0, stations);
+  draw.click(80, 102, stations);
+  draw.click(120, 103, stations);
+  draw.key("Backspace");
+  out.afterBackspace = draw.marks().dots.map((d) => d.chainage_m);
+  draw.key("Backspace");
+  draw.key("Backspace");
+  out.backspaceToArmed = draw.phase();
+  draw.click(40, 0, stations);
+  draw.click(80, 102, stations);
+  out.escape = draw.key("Escape");
+  out.escApplied = log.applied.length;
+  out.escClosed = log.closed;
+  out.escPhase = draw.phase();
+  out.escDots = draw.marks().dots.length;
+  out.enterOutsideDrawing = draw.key("Enter");
+}
+
+process.stdout.write(JSON.stringify(out));
diff --git a/resources/tester/test_174_b07_cross_cell_stack.py b/resources/tester/test_174_b07_cross_cell_stack.py
index cb4982436..eefcac2ce 100644
--- a/resources/tester/test_174_b07_cross_cell_stack.py
+++ b/resources/tester/test_174_b07_cross_cell_stack.py
@@ -11,7 +11,7 @@
 
 import pytest
 
-from B07_DesignDetail.B07_DesignDetail_Engine_Cad import GROUND_LAYER_ID
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import GROUND_COLOR
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
     CELL_TABLE_PAD_MM,
     build_cross_sheet,
@@ -95,7 +95,9 @@ def test_같은_행_표_한_높이_그림_중심_칸_가운데() -> None:
     assert tables[0][0] == pytest.approx(tables[1][0])
     # 도로 중심(offset 0) = 칸 가운데 · 그림(원지반) 아래 끝 = 글(없으면 표) 위 8 mm
     grounds = [
-        entities_bbox([e]) for e in drawing["entities"] if e.get("layerId") == GROUND_LAYER_ID
+        entities_bbox([e])
+        for e in drawing["entities"]
+        if e.get("type") == "PolyLine" and e.get("lineColor") == GROUND_COLOR
     ]
     for placement, slot, table, design, ground in zip(
         drawing["cross_placements"], sheet["slots"], tables, designs, grounds, strict=True
diff --git a/resources/tester/test_180_2_b07_cross_scale.py b/resources/tester/test_180_2_b07_cross_scale.py
index 3fc8dec6e..e9d47710d 100644
--- a/resources/tester/test_180_2_b07_cross_scale.py
+++ b/resources/tester/test_180_2_b07_cross_scale.py
@@ -14,7 +14,7 @@ from pathlib import Path
 
 import pytest
 
-from B07_DesignDetail.B07_DesignDetail_Engine_Cad import DRAWING_FORMAT, GROUND_LAYER_ID
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import DRAWING_FORMAT, GROUND_COLOR
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
     CELL_TABLE_PAD_MM,
     build_cross_sheet,
@@ -81,7 +81,9 @@ def test_배율_15_표_크기와_쌓기() -> None:
         bottom = shape["origin"]["y"] - sum(shape["rowHeights"])
         assert bottom == pytest.approx(slot[1] - h / 4 + CELL_TABLE_PAD_MM)  # 표 아래선 그대로
     grounds = [
-        entities_bbox([e]) for e in drawing["entities"] if e.get("layerId") == GROUND_LAYER_ID
+        entities_bbox([e])
+        for e in drawing["entities"]
+        if e.get("type") == "PolyLine" and e.get("lineColor") == GROUND_COLOR
     ]
     # 글 2 줄 × 3.0 × 1.5 = 9 mm · 간격 8 mm 는 배율 안 탐
     tops = [t["shapeData"]["origin"]["y"] for t in tables]
diff --git a/resources/tester/test_180_b07_cross_group.py b/resources/tester/test_180_b07_cross_group.py
index 4feffb1a1..d98296baa 100644
--- a/resources/tester/test_180_b07_cross_group.py
+++ b/resources/tester/test_180_b07_cross_group.py
@@ -10,6 +10,7 @@
 
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
     FRAME_LAYER_ID,
+    GROUND_COLOR,
     GROUND_LAYER_ID,
     build_cross_drawing,
 )
@@ -57,7 +58,9 @@ def _ground_locked(drawing: dict) -> bool:
 
 
 def test_원지반_층_안_잠김() -> None:
-    assert _ground_locked(_drawing()) is False
+    # 장 = 원지반이 측점 층에(212-2) · 도각 말고 잠긴 층 없음
+    layers = _drawing()["layers"]
+    assert not any(layer["isLocked"] for layer in layers if layer["id"] != FRAME_LAYER_ID)
     single = build_cross_drawing(_source(0.0), "cross_00000m", _design_line(), None, None, "")
     assert _ground_locked(single) is False
 
@@ -72,9 +75,9 @@ def test_측점마다_groupId_하나() -> None:
     assert {e["groupId"] for e in grouped} == set(group_ids)
     for group_id in group_ids:
         members = [e for e in grouped if e["groupId"] == group_id]
-        layers = {e["layerId"] for e in members}
         types = {e["type"] for e in members}
-        assert GROUND_LAYER_ID in layers and "Table" in types and "Text" in types
+        ground = any(e["type"] == "PolyLine" and e["lineColor"] == GROUND_COLOR for e in members)
+        assert ground and "Table" in types and "Text" in types
     # 격자선 · 도각은 묶지 않음
     assert all("groupId" not in e for e in drawing["entities"] if e["layerId"] == FRAME_LAYER_ID)
     assert all(e["layerId"] != FRAME_LAYER_ID for e in grouped)
diff --git a/resources/tester/test_212_3_b07_cross_layout_buttons.py b/resources/tester/test_212_3_b07_cross_layout_buttons.py
new file mode 100644
index 000000000..3b51c0f18
--- /dev/null
+++ b/resources/tester/test_212_3_b07_cross_layout_buttons.py
@@ -0,0 +1,79 @@
+# -*- coding: utf-8 -*-
+"""212-3 B07 좌측 「횡단도」 배치 칸 — 단추 · 숫자 칸 한 규격 · 한 줄에 한 일 · 남는 검은 선 판정.
+
+못박는 것
+  - 줄 = 「배치 열 · 행」 · 「[이 장] [모든 장]」 · 「표 배율 [배율 적용]」
+    · [안내선 숨기기](부르는 쪽).
+  - 단추 · 숫자 칸 · 이름 = 줄 위 작은 단추 토큰(187 `--btn-bar-*` · 높이 16) · 한 줄 안 같은 너비.
+  - 옛 한 줄 감기(flex-wrap) · 숫자 칸 48px 고정 없음.
+  - [안내선 숨기기] 뒤 남는 검은 선 = 인쇄 칸선(도각 층 도면 개체 · 회청 `#8ea0b5`
+    · 밝은 바탕에서 짙게 그려짐) — 안내선(겹판)과 다른 것이라 지우지 않음 · 단추는 겹판만 끔.
+"""
+
+import re
+from pathlib import Path
+
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import FRAME_LAYER_ID, TABLE_LINE_COLOR
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import _grid_lines
+from B07_DesignDetail.B07_DesignDetail_Engine_Template import use_project_templates
+
+ROOT = Path(__file__).resolve().parents[2]
+CSS = (ROOT / "B07_DesignDetail/B07_DesignDetail_UI_Style.css").read_text(encoding="utf-8")
+PANELS = (ROOT / "B07_DesignDetail/B07_DesignDetail_UI_Panels.ts").read_text(encoding="utf-8")
+PAGE = (ROOT / "B07_DesignDetail/B07_DesignDetail_UI_Page.ts").read_text(encoding="utf-8")
+GUIDE = (ROOT / "B07_DesignDetail/openwebcad/src/integration/guide-area.ts").read_text(
+    encoding="utf-8"
+)
+THEME = (ROOT / "ui_template/ui_template_theme.css").read_text(encoding="utf-8")
+
+
+def _block(selector: str) -> str:
+    m = re.search(r"(?:^|\n)" + re.escape(selector) + r"\s*\{([^}]*)\}", CSS)
+    assert m, selector
+    return m.group(1)
+
+
+def _decl(block: str, prop: str) -> str:
+    m = re.search(r"(?:^|;|\s)" + re.escape(prop) + r"\s*:\s*([^;]+);", block)
+    assert m, prop
+    return m.group(1).strip()
+
+
+def test_단추_숫자_칸_한_규격_토큰():
+    shared = _block(".b07-cross-layout .ui-btn,\n.b07-cross-layout .ui-field .ui-input")
+    assert _decl(shared, "padding") == "var(--btn-bar-padding)"
+    assert _decl(shared, "font-size") == "var(--btn-bar-font-size)"
+    assert _decl(shared, "line-height") == "1"
+    assert _decl(shared, "height") == "auto"  # 공용 작은 칸 30px 를 풀어 단추 높이에 맞춤
+    label = _block(".b07-cross-layout .ui-field__label")
+    assert _decl(label, "font-size") == "var(--btn-bar-font-size)"
+    # 토큰은 theme 한 곳(187)
+    assert "--btn-bar-padding: 1px var(--spacing-8);" in THEME
+    assert "--btn-bar-font-size: var(--text-caption);" in THEME
+
+
+def test_한_줄에_한_일_같은_너비():
+    box = _block(".b07-cross-layout")
+    assert _decl(box, "flex-direction") == "column"
+    assert "flex-wrap" not in box
+    assert _decl(_block(".b07-cross-layout__row > *"), "flex") == "1 1 0"
+    assert "width: 48px" not in CSS
+    assert 'line.className = "b07-cross-layout__row"' in PANELS
+    assert "row(cols.root, rows.root)" in PANELS
+    assert re.search(r"row\(\s*action\(\"이 장\"[^;]*action\(\"모든 장\"", PANELS, re.S)
+    assert "box.append(row(scale.root, button));" in PANELS
+    # 안내선 단추 = 배치 칸 맨 아래 한 줄(전체 폭)
+    assert "controls.append(guideToggle);" in PAGE
+
+
+def test_남는_검은_선은_인쇄_칸선_지우지_않음():
+    use_project_templates(None)
+    lines = _grid_lines("cross_s00000m", 4, 4)
+    assert len(lines) == 10  # 세로 5 · 가로 5 그대로
+    assert all(e["layerId"] == FRAME_LAYER_ID for e in lines)
+    assert all(e["lineColor"] == TABLE_LINE_COLOR == "#8ea0b5" for e in lines)
+    # 안내선 단추는 겹판(점선 영역 + 붉은 틀)만 — 도면 개체를 안 건드림
+    draw = GUIDE[GUIDE.index("export function drawGuide") :]
+    draw = draw[: draw.index("\n}\n")]
+    assert "if (!guide || !guideVisible) return;" in draw
+    assert "getEntities" not in draw and "setEntities" not in draw
diff --git a/resources/tester/test_212_b07_cross_station_layers.py b/resources/tester/test_212_b07_cross_station_layers.py
new file mode 100644
index 000000000..baa293a31
--- /dev/null
+++ b/resources/tester/test_212_b07_cross_station_layers.py
@@ -0,0 +1,185 @@
+# -*- coding: utf-8 -*-
+"""212-1 · 212-2 B07 횡단 장 — 원지반 고르기 · 측점별 도면층.
+
+못박는 것
+  - 212-1 옛 확정 장(원지반 층 잠금째 저장)도 열 때 원지반 잠금 풂 · 측점 층 없으면 stale_layers.
+  - 212-2 장의 측점마다 층 하나(`b08-station-{측점}` · 이름 「횡단 {제목}」) = 원지반 · 계획선 ·
+    암 그림(자식 선까지) · 표 · 글은 수량표 층 · 격자선 · 도각은 도각 층 · 종류 층 없음.
+  - 개체 id 는 그대로(층만 바뀜) · placement 에 layer_id · design_ids(화면 덧그림 갈아 끼우기).
+  - DXF 층 이름 = 측점 층 id 그대로(금지 문자 없음).
+  - 화면 덧그림도 측점 층 · design_ids 로 서버 설계선 걷음(소스 확인 · typecheck 는 따로).
+"""
+
+import json
+from pathlib import Path
+from uuid import uuid5
+
+import ezdxf
+
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
+    _POLY_NS,
+    CROSS_TABLE_LAYER_ID,
+    DESIGN_COLOR,
+    DESIGN_LAYER_ID,
+    DRAWING_FORMAT,
+    FRAME_LAYER_ID,
+    GROUND_COLOR,
+    GROUND_LAYER_ID,
+    ROCK_LAYER_ID,
+    STRUCTURE_LAYER_ID,
+)
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
+    STATION_LAYER_PREFIX,
+    build_cross_sheet,
+    plan_cross_sheets,
+)
+from B07_DesignDetail.B07_DesignDetail_Engine_Frame_Export import _layer_name, drawing_to_dxf
+from B07_DesignDetail.B07_DesignDetail_Engine_Template import use_project_templates
+from B07_DesignDetail.B07_DesignDetail_Router_Support import CROSS_SHEET_LAYOUT, _read_drawing
+
+ROOT = Path(__file__).resolve().parents[2]
+KIND_LAYERS = {GROUND_LAYER_ID, DESIGN_LAYER_ID, STRUCTURE_LAYER_ID, ROCK_LAYER_ID}
+
+
+def _source(chainage: float) -> dict:
+    return {
+        "chainage_m": chainage,
+        "samples": [
+            {"valid": True, "offset_m": float(x), "elevation_m": 100.0 + 0.1 * x}
+            for x in range(-5, 6)
+        ],
+    }
+
+
+def _sheet() -> tuple[dict, dict]:
+    use_project_templates(None)
+    chainages = [0.0, 20.0, 40.0, 60.0]
+    sheet = plan_cross_sheets(chainages, {"default": [2, 2]})[0]
+    sections = [
+        {
+            "chainage": c,
+            "source": _source(c),
+            # 암 지반 = 암 경계선도 측점 층으로
+            "design": {"rock_boundary_offset_m": -1.0} if c == 20.0 else None,
+            "design_line": [{"offset_m": x, "elevation_m": 100.0} for x in (-3.0, 0.0, 3.0)],
+            "quantity_table": {"ground": 1.0, "planned": 0.5},
+            "title": f"No.{int(c // 20)}",
+        }
+        for c in chainages
+    ]
+    return sheet, build_cross_sheet(sheet, sections)
+
+
+def _flat(entities: list[dict]) -> list[dict]:
+    out = []
+    for entity in entities:
+        out.append(entity)
+        out.extend(_flat(entity.get("children") or []))
+    return out
+
+
+def test_측점마다_층_하나_이름_횡단_No():
+    _sheet_, drawing = _sheet()
+    layers = drawing["layers"]
+    ids = [layer["id"] for layer in layers]
+    assert ids[:4] == [f"{STATION_LAYER_PREFIX}{c}" for c in (0.0, 20.0, 40.0, 60.0)]
+    assert [layer["name"] for layer in layers[:4]] == [
+        "횡단 No.0",
+        "횡단 No.1",
+        "횡단 No.2",
+        "횡단 No.3",
+    ]
+    assert ids[4:] == [CROSS_TABLE_LAYER_ID, FRAME_LAYER_ID]
+    assert not KIND_LAYERS & set(ids)  # 종류 층 없음 — 빈 층이 안 남음
+    assert all(layer["isVisible"] and not layer["isLocked"] for layer in layers[:4])
+
+
+def test_그림은_측점_층_표_글은_수량표_층_격자는_도각():
+    _sheet_, drawing = _sheet()
+    flat = _flat(drawing["entities"])
+    assert not any(e["layerId"] in KIND_LAYERS for e in flat)  # 자식 선까지
+    by_layer: dict[str, list[dict]] = {}
+    for entity in drawing["entities"]:
+        by_layer.setdefault(entity["layerId"], []).append(entity)
+    for chainage in (0.0, 20.0, 40.0, 60.0):
+        members = by_layer[f"{STATION_LAYER_PREFIX}{chainage}"]
+        colors = {e["lineColor"] for e in members}
+        assert GROUND_COLOR in colors and DESIGN_COLOR in colors
+        assert all(e["type"] == "PolyLine" for e in members)
+        assert len({e["groupId"] for e in members}) == 1  # 180-1 groupId 그대로
+    # 암 지반 측점만 점선 암 경계선(종류 = 선 꼴)
+    rock = [e for e in by_layer[f"{STATION_LAYER_PREFIX}20.0"] if e.get("lineDash")]
+    assert len(rock) == 1
+    assert not any(e.get("lineDash") for e in by_layer[f"{STATION_LAYER_PREFIX}0.0"])
+    assert {e["type"] for e in by_layer[CROSS_TABLE_LAYER_ID]} <= {"Table", "Text"}
+    assert all("groupId" not in e for e in by_layer[FRAME_LAYER_ID])
+
+
+def test_id_그대로_placement_layer_id_design_ids():
+    sheet, drawing = _sheet()
+    by_id = {e["id"]: e for e in drawing["entities"]}
+    for placement in drawing["cross_placements"]:
+        chainage = placement["chainage_m"]
+        layer_id = f"{STATION_LAYER_PREFIX}{chainage}"
+        assert placement["layer_id"] == layer_id
+        seed = f"{sheet['id']}:{chainage}"
+        # 개체 id 는 종류 층 씨앗 그대로 — 저장본 · 덧그림 짝이 안 흔들림
+        ground = by_id[str(uuid5(_POLY_NS, f"{seed}:{GROUND_LAYER_ID}"))]
+        assert ground["layerId"] == layer_id and ground["lineColor"] == GROUND_COLOR
+        design_ids = placement["design_ids"]
+        assert design_ids == [str(uuid5(_POLY_NS, f"{seed}:{DESIGN_LAYER_ID}"))]
+        assert all(by_id[i]["lineColor"] == DESIGN_COLOR for i in design_ids)
+
+
+def test_DXF_층_이름_측점_층_id(tmp_path: Path):
+    _sheet_, drawing = _sheet()
+    for layer in drawing["layers"]:
+        assert _layer_name(layer["id"]) == layer["id"]
+    data, _skipped = drawing_to_dxf(drawing)
+    (tmp_path / "sheet.dxf").write_bytes(data)
+    names = {layer.dxf.name for layer in ezdxf.readfile(tmp_path / "sheet.dxf").layers}
+    assert {f"{STATION_LAYER_PREFIX}{c}" for c in (0.0, 20.0, 40.0, 60.0)} <= names
+    assert not KIND_LAYERS & names
+
+
+def test_옛_확정_장_원지반_잠금_풂_측점_층_안내(tmp_path: Path):
+    stage = tmp_path / "B07_DesignDetail"
+    (stage / "drawings").mkdir(parents=True)
+    layers = [
+        {"id": GROUND_LAYER_ID, "name": "원지반", "isVisible": True, "isLocked": True},
+        {"id": FRAME_LAYER_ID, "name": "도각", "isVisible": True, "isLocked": True},
+    ]
+    saved = {"format": DRAWING_FORMAT, "entities": [], "layers": layers}
+    path = stage / "drawings" / "cross_s00000m.json"
+    path.write_text(json.dumps(saved), encoding="utf-8")
+    entry = {"kind": "cross", "label": "1장", "confirmed": True, "layout": CROSS_SHEET_LAYOUT}
+    (stage / "manifest.json").write_text(
+        json.dumps({"drawings": {"cross_s00000m": entry}}), encoding="utf-8"
+    )
+
+    def read() -> dict:
+        _k, _l, drawing, confirmed, _t = _read_drawing(
+            tmp_path, tmp_path / "x.json", "cross_s00000m"
+        )
+        assert confirmed
+        return drawing
+
+    drawing = read()
+    locked = {layer["id"]: layer["isLocked"] for layer in drawing["layers"]}
+    assert locked == {GROUND_LAYER_ID: False, FRAME_LAYER_ID: True}  # 도각은 그대로 잠금
+    assert drawing.get("stale_layers") is True
+    # 측점 층으로 확정한 장은 안내 없음
+    saved["layers"] = [{"id": f"{STATION_LAYER_PREFIX}0", "name": "횡단 No.0"}, layers[1]]
+    path.write_text(json.dumps(saved), encoding="utf-8")
+    assert "stale_layers" not in read()
+
+
+def test_화면_덧그림_측점_층_design_ids():
+    struct = (ROOT / "B07_DesignDetail/B07_DesignDetail_UI_Cad_Structures.ts").read_text(
+        encoding="utf-8"
+    )
+    assert "layer_id?: string;" in struct and "design_ids?: string[];" in struct
+    assert "moveToLayer(entity, placement.layer_id)" in struct
+    assert "!designIds.has(entity.id as string)" in struct
+    page = (ROOT / "B07_DesignDetail/B07_DesignDetail_UI_Page.ts").read_text(encoding="utf-8")
+    assert "response.drawing.stale_layers" in page
diff --git a/resources/tester/test_215_1_free_profile.py b/resources/tester/test_215_1_free_profile.py
new file mode 100644
index 000000000..e245e7a61
--- /dev/null
+++ b/resources/tester/test_215_1_free_profile.py
@@ -0,0 +1,152 @@
+# -*- coding: utf-8 -*-
+"""215-1 B05 종단 [자유지정] — 범위 고르고 클릭으로 계획선 잇기.
+
+계산 · 상태(`A00_Common/design/design_profile_free.ts`)는 Node 헬퍼
+(`helper_215_1_free_profile.cjs`)가 트랜스파일해 돌리고, 화면 배선(도구줄 단추 · 오버레이 ·
+키 · 적용 길)은 소스로 본다.
+"""
+
+import json
+import os
+import subprocess
+from pathlib import Path
+
+import pytest
+
+HERE = Path(__file__).resolve().parent
+ROOT = HERE.parent.parent
+
+
+def _read(relative: str) -> str:
+    return (ROOT / relative).read_text(encoding="utf-8")
+
+
+@pytest.fixture(scope="module")
+def out():
+    proc = subprocess.run(
+        ["node", os.path.join(HERE, "helper_215_1_free_profile.cjs")],
+        capture_output=True,
+        text=True,
+        encoding="utf-8",
+        timeout=60,
+    )
+    assert proc.returncode == 0, proc.stderr
+    return json.loads(proc.stdout)
+
+
+def test_높이_변환_세로_창_왕복(out):
+    assert out["yAt103_2"] == pytest.approx(121.6)
+    assert out["zBack"] == pytest.approx(103.2)
+    assert out["parsed"] == {"scale": 1.2, "offset": -20}
+    assert out["parsedNone"] == {"scale": 1, "offset": 0}
+
+
+def test_세로선_붙음_범위_안만(out):
+    assert out["snap79"] == 80
+    assert out["snapOutside"] == 160
+
+
+def test_범위_고르기_강조(out):
+    assert out["pendingEdges"] == [40]
+    assert out["rangePhase"] == "armed"
+    assert out["band"] == [40, 160]
+    assert out["stillArmed"] == "armed"  # 가운데 클릭은 시작이 아님
+
+
+def test_시작_이음_지금_계획고(out):
+    assert out["startPhase"] == "drawing"
+    assert out["startDot"] == {"chainage_m": 40, "elevation_m": pytest.approx(100.6)}
+
+
+def test_클릭_점_세로선_붙음_높이(out):
+    assert out["point1"] == {"chainage_m": 80, "elevation_m": pytest.approx(103.46)}
+    assert out["dotsAfterBack"] == 2  # 뒤로 가는 클릭은 무시
+
+
+def test_점선_미리_보기_기울기_글(out):
+    first, last = out["preview"]
+    assert (first["preview"], last["preview"]) == (False, True)
+    assert last["to"] == {"chainage_m": 120, "elevation_m": pytest.approx(101.2)}
+    assert first["grade"] == pytest.approx(7.15)
+    assert last["grade"] == pytest.approx(-5.65)
+    assert not first["over"] and not last["over"]
+
+
+def test_기준_넘음_빨강(out):
+    assert out["steep"]["over"] is True
+    assert abs(out["steep"]["grade"]) > 14
+
+
+def test_끝_이음과_적용_편집(out):
+    assert out["finishPreview"] == {"chainage_m": 160, "elevation_m": pytest.approx(102.4)}
+    assert out["appliedCount"] == 1 and out["closed"] == 1 and out["afterPhase"] == "range"
+    assert out["offsetKeys"] == ["100.000", "120.000", "140.000", "60.000", "80.000"]
+    pvi = out["pvi"]
+    assert pvi["40"] == pytest.approx(out["ground"]["40"])  # 양 끝 그대로
+    assert pvi["160"] == pytest.approx(out["ground"]["160"])
+    assert pvi["80"] == pytest.approx(103.46)
+    assert pvi["120"] == pytest.approx(101.2)
+    assert pvi["60"] == pytest.approx((100.6 + 103.46) / 2)  # 점 사이 = 직선
+    assert pvi["140"] == pytest.approx((101.2 + 102.4) / 2)
+    assert out["outsideUntouched"] is True
+
+
+def test_종단곡선_자동(out):
+    assert out["radiiKeys"] == ["120.000", "80.000"]
+    assert out["r80"] == pytest.approx(out["expectR80"])
+    assert out["curve80L"] == pytest.approx(20)  # 정책 기본 길이 L
+
+
+def test_Enter_끝_거꾸로_시작(out):
+    assert out["reverseAnchor"] == 160
+    assert out["enter"] is True and out["enterApplied"] == 1
+    pvi = out["enterPvi"]
+    assert pvi["40"] == pytest.approx(100.6) and pvi["160"] == pytest.approx(102.4)
+    assert pvi["100"] == pytest.approx(104)
+    assert pvi["60"] == pytest.approx(100.6 + (104 - 100.6) / 3, abs=1e-5)
+
+
+def test_Backspace_와_Esc_취소(out):
+    assert out["afterBackspace"] == [40, 80]
+    assert out["backspaceToArmed"] == "armed"
+    assert out["escape"] is True
+    assert out["escApplied"] == 0 and out["escClosed"] == 1
+    assert out["escPhase"] == "range" and out["escDots"] == 0
+    assert out["enterOutsideDrawing"] is False
+
+
+def test_도구줄_직선화_오른쪽_자유지정():
+    tools = _read("B05_Profile/B05_Profile_UI_Profile_Tools.ts")
+    assert '"자유지정"' in tools
+    assert "wrap.append(reset, undo, redo, straighten, free, shift, up, down)" in tools
+    assert 'className = "b05-route-profile__tool"' in tools  # 같은 단추 양식
+
+
+def test_적용은_직선화와_같은_길_키_배선():
+    panel = _read("B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts")
+    assert "apply: (next) => ctx.applyEdits(next)" in panel
+    assert 'tools.mode() === "free" && free.key(key)' in panel
+    profile = _read("A00_Common/design/design_profile.ts")
+    # applyEdits = 캐시(store.replace) + 되돌리기 기록 — 자동저장 없음
+    assert "store.replace(next);\n    history.record();" in profile
+    render = _read("B05_Profile/B05_Profile_UI_Profile_Render.ts")
+    assert "ctx.tools.mountOverlay(" in render
+
+
+def test_오버레이_점선_빨강_글():
+    view = _read("A00_Common/design/design_profile_free_view.ts")
+    assert "is-preview" in view and "is-over" in view
+    assert "grade_pct.toFixed(1)}%" in view
+    css = _read("B05_Profile/B05_Profile_UI_Style_Table.css")
+    assert ".b05-profile-freemark__line {" in css and "stroke-dasharray: 6 4" in css
+    assert ".b05-profile-freemark__line.is-over" in css
+
+
+def test_줄_수_늘리지_않음():
+    for relative in (
+        "A00_Common/design/design_profile.ts",
+        "A00_Common/design/design_profile_free.ts",
+        "A00_Common/design/design_profile_free_view.ts",
+    ):
+        assert len(_read(relative).splitlines()) <= 700
+    assert len(_read("A00_Common/design/design_profile.ts").splitlines()) <= 698
diff --git a/resources/tester/test_217_1_b06_notice_spacing.py b/resources/tester/test_217_1_b06_notice_spacing.py
new file mode 100644
index 000000000..e15d8ef74
--- /dev/null
+++ b/resources/tester/test_217_1_b06_notice_spacing.py
@@ -0,0 +1,30 @@
+"""217-1 B06 알림 칩 줄 여백 줄임 — 줄 위 여백 16→8 · 칩 줄 ↔ 첫 카드 28→16 (CSS 값 고정)."""
+
+from test_196_1_b06_notice_chips import B06
+
+CSS = (B06 / "B06_Section_UI_Style_Cross.css").read_text(encoding="utf-8")
+
+
+def _rule(selector: str) -> str:
+    body = CSS[CSS.index(selector + " {") :]
+    return body[: body.index("}")]
+
+
+def test_칩_줄_위_여백은_8_아래_여백은_0():
+    bar = _rule(".b06-section__notice-bar")
+    assert "padding-block: var(--spacing-8) 0;" in bar
+    assert "spacing-16) var(--spacing-4)" not in bar
+
+
+def test_첫_카드와의_간격은_카드_칸_gap_24에서_8을_당겨_16():
+    bar = _rule(".b06-section__notice-bar")
+    # 위 = 카드 칸 padding(16) 상쇄 · 아래 = gap(24) 중 8 당김
+    assert "margin-block: calc(-1 * var(--spacing-16)) calc(-1 * var(--spacing-8));" in bar
+    assert "gap: var(--spacing-24)" in _rule(".b06-section__cards")
+
+
+def test_sticky_top_과_scroll_margin_그대로():
+    bar = _rule(".b06-section__notice-bar")
+    assert "position: sticky" in bar
+    assert "top: calc(-1 * var(--spacing-16))" in bar
+    assert "scroll-margin-top: calc(var(--b06-notice-h, 0px) + var(--spacing-8))" in CSS