Merge remote-tracking branch 'origin/sub_laptop_4' into main_laptop_1

resources/tester/test_b07_cross_overlay_extent.py

@@ -0,0 +1,91 @@
+"""B07 횡단면도 — 화면이 덧그리는 설계선·구조물까지 박스 안 1 mm (68-3).
+
+서버가 화면과 같은 TS 를 Node 로 돌려 덧그림 범위를 재고(`_Cross_Extent_Node`),
+장 배치 · 블록 테두리가 그 범위를 덮는다.
+"""
+
+import json
+from pathlib import Path
+
+import pytest
+
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
+    CROSS_MM,
+    FRAME_LAYER_ID,
+    build_cross_drawing,
+)
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import section_block_size
+from B07_DesignDetail.B07_DesignDetail_Engine_Template import entities_bbox
+
+ROOT = Path(__file__).resolve().parents[2]
+FIXTURE = Path(__file__).parent / "fixtures" / "b07_cross_overlay_sections.json"
+NODE_MODULES = ROOT / "config" / "node_modules"
+
+_SOURCE = {
+    "chainage_m": 0.0,
+    "samples": [
+        {"valid": True, "offset_m": float(x), "elevation_m": 100.0 + 0.2 * x}
+        for x in range(-10, 11)
+    ],
+}
+_DESIGN_LINE = [
+    {"offset_m": -10.0, "elevation_m": 98.0},
+    {"offset_m": -2.0, "elevation_m": 99.6},
+    {"offset_m": 2.0, "elevation_m": 99.6},
+    {"offset_m": 10.0, "elevation_m": 102.0},
+]
+# 오른쪽으로 8 m 더 뻗고 위로 3 m 솟는 덧그림(관 · 날개벽 따위)
+_OVERLAY = (-3.0, 18.0, 97.0, 105.0)
+
+
+def _frame(drawing: dict) -> list[float]:
+    return drawing["cross_placements"][0]["frame"]
+
+
+def test_frame_covers_overlay_by_one_mm() -> None:
+    drawing = build_cross_drawing(
+        _SOURCE, "cross_s00000m", _DESIGN_LINE, None, None, "", overlay=_OVERLAY
+    )
+    placement = drawing["cross_placements"][0]
+    left, bottom, right, top = _frame(drawing)
+    to_x = lambda offset: offset * CROSS_MM + placement["ox"]  # noqa: E731
+    to_y = lambda elev: (elev - placement["dy"]) * CROSS_MM + placement["oy"]  # noqa: E731
+    assert right - to_x(_OVERLAY[1]) == pytest.approx(1.0)
+    assert top - to_y(_OVERLAY[3]) == pytest.approx(1.0)
+    # 왼쪽 · 아래는 서버 선(원지반 끝 · 설계선)이 더 바깥 — 그쪽에 1 mm
+    lines = [e for e in drawing["entities"] if e.get("layerId") != FRAME_LAYER_ID]
+    min_x, _min_y, _max_x, _max_y = entities_bbox(lines)
+    assert min_x - left == pytest.approx(1.0)
+    # 장 배치용 크기도 같은 규칙
+    width, height = section_block_size(_SOURCE, _DESIGN_LINE, with_table=False, overlay=_OVERLAY)
+    assert width == pytest.approx(right - left)
+    assert height == pytest.approx(top - bottom)
+
+
+def test_no_overlay_keeps_68_1_frame() -> None:
+    plain = build_cross_drawing(_SOURCE, "cross_s00000m", _DESIGN_LINE, None, None, "")
+    inside = build_cross_drawing(
+        _SOURCE, "cross_s00000m", _DESIGN_LINE, None, None, "", overlay=(1.0, 3.0, 99.7, 99.8)
+    )
+    assert _frame(plain) == pytest.approx(_frame(inside))
+
+
+@pytest.mark.skipif(not NODE_MODULES.is_dir(), reason="프론트엔드 의존성 미설치")
+def test_node_bundle_measures_screen_overlay() -> None:
+    """화면 코드를 Node 로 — 배수관 측점(85.052)은 서버 범위(+4.0 m)보다 13.8 m 까지 뻗는다."""
+    from B07_DesignDetail.B07_DesignDetail_Router_Support_Overlay import (
+        _NPM_SCRIPT,
+        BUNDLE,
+        _extents_from,
+    )
+    from common_util.common_util_node_bundle import run_bundle_json
+
+    detail = json.loads(FIXTURE.read_text(encoding="utf-8"))
+    extents = _extents_from(run_bundle_json(BUNDLE, _NPM_SCRIPT, {"detail": detail}))
+    assert set(extents) == {0, 85.05}  # 측점 키는 0.01 m 로 끊는다(cross_station)
+    x_min, x_max, y_min, y_max = extents[85.05]
+    assert x_max == pytest.approx(13.8216, abs=1e-3)
+    assert x_min == pytest.approx(-10.4371, abs=1e-3)
+    assert y_max - y_min == pytest.approx(16.9505, abs=1e-3)
+    # 0 m: 노폭 글자(2 mm, 세로 가운데 정렬)가 맨 위 — 글자 반높이 0.1 m 까지
+    assert extents[0][3] == pytest.approx(879.8831, abs=1e-3)