/* 270-1 횡단 보기 배수유역도 = 고름 한 칸에서 파생 — 진짜 TS 를 Node 로 돌림.
 * `bindCrossPick`(B06_Section_UI_Page_Pick_Sync) + 진짜 `paintMapPick`(design_pick_profile) + 지도 흉내.
 * 표준출력 JSON 한 벌 · 짝 = test_270_1_cross_map.py.
 */
const fs = require("fs");
const path = require("path");
const ROOT = path.join(__dirname, "..", "..");
const NM = path.join(ROOT, "config", "node_modules");
const ts = require(path.join(NM, "typescript"));

function loadTs(file, stubs = {}) {
  const js = ts.transpileModule(fs.readFileSync(path.join(ROOT, file), "utf8"), {
    compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
  }).outputText;
  const box = { exports: {} };
  const localRequire = (request) => {
    if (stubs[request]) return stubs[request];
    throw new Error(`stub 없음: ${request}`);
  };
  new Function("exports", "module", "require", js)(box.exports, box, localRequire);
  return box.exports;
}

globalThis.window = { addEventListener() {}, removeEventListener() {} };
globalThis.document = { addEventListener() {}, removeEventListener() {} };

const store = new Map();
const DSel = loadTs("A00_Common/design/design_selection.ts", {
  "../b_page_state": {
    readState: (key, pid) => store.get(`${key}:${pid}`) ?? null,
    writeState: (key, value, pid) => store.set(`${key}:${pid}`, value),
  },
});
const ESC = loadTs("A00_Common/design/design_pick_escape.ts", { "./design_selection": DSel });
const IRR = {
  irregularStationId: (id) => `irregular:${id}`,
  isPipeStation: (s) => s.origin === "pipe",
};
const SY = loadTs("B05_Profile/B05_Profile_UI_Selection.ts", {
  "../A00_Common/design/design_selection": DSel,
  "./B05_Profile_UI_IrregularStations": IRR,
});
const PP = loadTs("A00_Common/design/design_pick_profile.ts", {
  "./design_selection": DSel,
  "./design_pipe_ids": { pipeIdAt: (at) => `pipe-${at.toFixed(2)}` }, // 프로젝트 없음 = 옛 자리 이름(323-5)
  "./design_pick_escape": ESC,
  "../../B05_Profile/B05_Profile_UI_Selection": SY,
  "../../B05_Profile/B05_Profile_UI_IrregularStations": IRR,
});
const SYNC = loadTs("B06_Section/B06_Section_UI_Page_Pick_Sync.ts", {
  "../A00_Common/design/design_selection": DSel,
  "../A00_Common/design/design_pick_escape": ESC,
});

const PID = "p270";
/* 지도 흉내 — 관 셋(95.38 · 195.3 · 292.22) · 고른 관 = 찾는 폭 안 관(배수유역도 `selectPipeAtChainage` 꼴) */
const PIPES = [95.38, 195.3, 292.22];
const map = {
  calls: [],
  pipe: null,
  station: null,
  selectPipeAtChainage(at, notify = true) {
    this.calls.push(["pipe", at, notify]);
    this.pipe =
      at === null ? null : (PIPES.find((c) => Math.abs(c - at) < DSel.PIPE_MATCH_M) ?? null);
  },
  markStation(at) {
    this.calls.push(["mark", at]);
    this.station = at;
  },
};
let visible = true;
let reapplied = 0;
const disposers = [];
const host = { visible: () => visible, onDispose: (fn) => disposers.push(fn) };
const deps = {
  sections: () => [],
  controls: {
    revetOffset: { highlightFor: () => false, selectedFor: () => false, select() {} },
    ford: { selectedFor: () => false, select() {} },
    box: { selectedFor: () => false, select() {} },
  },
  releaseForm() {},
  view: { focusStation() {}, refreshCards() {}, selectMark() {} },
  reapply: () => reapplied++,
  paintMap: (selection) => PP.paintMapPick(map, selection),
};
const pick = SYNC.bindCrossPick(PID, host, deps);
const snap = () => ({ pipe: map.pipe, station: map.station, reapplied, calls: map.calls.length });
const out = {};

// ① 횡단 보기 안 누름(from b06) — 지도는 칠하고 넘김 적용은 안 함
DSel.selectDesign(PID, { chainageM: 95.38, structureId: null }, { from: "b06" });
out.b06Pipe = { ...snap(), notify: map.calls[0]?.[2] };
// ② 일반 측점 카드(관 없음) — 옛 관 강조가 풀리고 마름모만
DSel.selectDesign(PID, { chainageM: 80, structureId: null }, { from: "b06" });
out.b06Card = snap();
// ③ 지도에서 고름(from map) — 지도 칠함 + 넘김 적용(카드 · 폼 · 알약 · 표 열)
DSel.selectDesign(PID, { chainageM: 292.22, structureId: null }, { from: "map" });
out.fromMap = snap();
// ④ 노면공(범위 · 기준 30) — 관 없음 · 넘김 적용
DSel.selectDesign(PID, { chainageM: 30, structureId: "pave" }, { from: "b05" });
out.pave = snap();
// ⑤ 풀기(from b06) — 지도 풂
DSel.selectDesign(PID, DSel.NO_SELECTION, { from: "b06" });
out.release = snap();
// ⑥ 숨은 보기 — 안 칠함 · 안 적용
visible = false;
const before = map.calls.length;
DSel.selectDesign(PID, { chainageM: 195.3, structureId: null }, { from: "map" });
out.hidden = { calls: map.calls.length - before, reapplied };
// ⑦ 다시 보임 뒤 다른 곳(종단 보기)이 바꾼 값 = 칠함 + 넘김 적용
visible = true;
DSel.selectDesign(PID, { chainageM: 95.38, structureId: null }, { from: "b05" });
out.show = snap();
pick.release(); // 풀기 길은 그대로(값은 부르는 쪽이 비움)
out.releaseKeepsMap = map.pipe;

process.stdout.write(JSON.stringify(out));