"""구조물도 상단 그림 — 그림 치수가 **수량표와 같은 한 벌**인가 (PLAN 12장).

⚠ 옛 B07 그림은 두께 식을 따로 적어, 상부·하부 두께를 넣어도 **그림만 옛 두께**였음.
"""

from __future__ import annotations

import math
import sys
from pathlib import Path

ROOT = Path(__file__).resolve().parents[2]
if str(ROOT) not in sys.path:
    sys.path.insert(0, str(ROOT))

from B08_Quantity.B08_Quantity_Engine_ObservedUnit import (  # noqa: E402
    expand_observed,
    load_observed_table,
)
from B08_Quantity.B08_Quantity_Engine_StructureFigure import (  # noqa: E402
    attach_figures,
    build_figure,
    figure_reason,
)
from B08_Quantity.B08_Quantity_Engine_UnitQuantity import (  # noqa: E402
    back_length_default_note,
    stone_masonry,
)


def _sheet(**options) -> dict:
    return {
        "title": "돌쌓기(메)",
        "type_id": "masonry_dry",
        "height_m": 2.0,
        "options": {"height_m": 2.0, **options},
    }


def _paths(shapes: list[dict]) -> list[dict]:
    return [shape for shape in shapes if shape["kind"] == "path"]


def _area(points: list[list[float]]) -> float:
    return abs(sum(x0 * y1 - x1 * y0 for (x0, y0), (x1, y1) in zip(points, points[1:]))) / 2


def test_벽_두께는_사용자가_넣은_값을_따른다() -> None:
    wall = _paths(build_figure(_sheet(back_len_cm=35, face_slope_ratio=0.3)))[0]["points"]
    # 식: 상부 0.35+0.30=0.65 · 하부 0.65+0.30×(2−1)=0.95 · 기울기 0.3 → 앞면 위 끝 0.6
    assert wall[:4] == [[0.0, 0.0], [0.6, 2.0], [1.25, 2.0], [0.95, 0.0]]
    given = _paths(
        build_figure(
            _sheet(
                back_len_cm=35, face_slope_ratio=0.3, thickness_top_m=0.5, thickness_bottom_m=1.2
            )
        )
    )[0]["points"]
    assert given[2] == [1.1, 2.0] and given[3] == [1.2, 0.0]


def test_터파기_넓이는_수량식과_같다() -> None:
    dig = _paths(build_figure(_sheet(back_len_cm=35, face_slope_ratio=0.3)))[1]
    assert dig["dash"]
    assert abs(_area(dig["points"]) - 2.0 * ((0.65 + 0.95) / 2 + 0.2)) < 1e-9


def test_못_그리는_장은_그림_대신_까닭이_실린다() -> None:
    payload = {
        "sheets": [
            _sheet(),
            {**_sheet(stone_cm="60~80"), "type_id": "boulder_masonry"},
            _sheet(back_len_cm=45),
        ]
    }
    attach_figures(payload)
    no_back, boulder, drawn = payload["sheets"]
    # 뒷길이 미정은 기본값이 있어 **그림이 섬**(2026-09-14 브레인 판정) — 까닭은 직경 축만.
    assert no_back["figure_reason"] is None and no_back["figure"]
    assert boulder["figure"] is None and "직경" in boulder["figure_reason"]
    assert drawn["figure_reason"] is None and drawn["figure"]


def _texts(shapes: list[dict]) -> list[str]:
    return [shape["text"] for shape in shapes if shape["kind"] == "text"]


def test_기본값으로_그린_장은_표_사유와_같은_말을_적는다() -> None:
    options = {"height_m": 2.0}
    _rows, table_notes = stone_masonry(2.0, 1.0, options, wet=False)
    table_default = [note for note in table_notes if "뒷길이를 안 골라" in note]
    assert table_default == [back_length_default_note(options, 45)]

    texts = _texts(build_figure(_sheet()))
    assert table_default[0] in texts
    assert "뒷길이 ℓ₃ = 45㎝ (기본)" in texts
    # 두께도 기본 45 로 — 상부 0.45+0.30
    assert "상부 0.75 m" in texts

    chosen = _texts(build_figure(_sheet(back_len_cm=45)))
    assert "뒷길이 ℓ₃ = 45㎝" in chosen and not any("안 골라" in text for text in chosen)
    assert back_length_default_note({"back_len_cm": 45}, 45) is None


def _wall_sheet(**options) -> dict:
    return {
        "title": "옹벽 H=2",
        "type_id": "retaining_wall",
        "height_m": 2.0,
        "options": {"height_m": 2.0, "form": "반중력식", **options},
    }


def test_옹벽_단면_치수가_표의_관측_수량을_그대로_낸다() -> None:
    """표 = 그림 — 그림이 쓰는 단면으로 표 수량(라이브러리 반올림)이 다시 나와야 함."""
    entry = load_observed_table().find("retaining_wall", {"form": "반중력식", "height_m": 2.0})
    section = entry["section"]
    amounts = {item["name"]: item["amount"] for item in entry["components"]}
    footing, wall, key, blinding = (section[k] for k in ("footing", "wall", "key", "blinding"))
    bottom = wall["top_m"] + wall["front_batter_m"] + wall["back_batter_m"]
    assert abs(bottom - 0.45) < 1e-9
    concrete = (
        footing["width_m"] * footing["thickness_m"]
        + key["width_m"] * key["depth_m"]
        + (wall["top_m"] + bottom) / 2 * wall["height_m"]
    )
    blind = blinding["thickness_m"] * (
        footing["width_m"] + 2 * blinding["overhang_m"] - key["width_m"]
    )
    form = math.hypot(wall["height_m"], wall["back_batter_m"]) + math.hypot(
        wall["height_m"], wall["front_batter_m"]
    )
    weep = section["weep"]
    pipe = wall["height_m"] / weep["area_m2"] * weep["pipe_length_m"]
    assert round(concrete, 2) == amounts["콘크리트"]  # 1.345
    assert round(blind, 2) == amounts["버림콘크리트"]  # 0.145
    assert round(form, 1) == amounts["유로폼"]  # 3.205
    assert round(pipe, 2) == amounts["물구멍관"]
    assert footing["thickness_m"] + wall["height_m"] == 2.0


def test_옹벽_그림은_기초잡석_두께를_산출_조건에서_받고_사유는_표와_같다() -> None:
    shapes = build_figure(_wall_sheet(), rubble_thickness_m=0.3)
    texts = _texts(shapes)
    assert "기초잡석 T=0.3 m — 산출 조건 · 폭은 버림과 같음" in texts
    assert "버림 T=0.10 · 폭 1.80 − 키 0.35 = 1.45 m" in texts
    wall = _paths(shapes)[0]["points"]
    assert [0.95, 0.4] in wall and [1.068, 2.0] in wall and [1.368, 2.0] in wall
    # 표 사유와 같은 말 — 터파기 줄이 없다는 것
    _rows, table_notes = expand_observed(
        "retaining_wall",
        {"form": "반중력식", "height_m": 2.0},
        _wall_sheet() | {"options": {"length_m": 10}},
    )
    missing = [note for note in table_notes if "터파기" in note]
    assert missing and missing[0] in texts
    assert not any(text.startswith("기초잡석") for text in _texts(build_figure(_wall_sheet(), 0)))


def test_옹벽_못_그리는_장은_표와_같은_까닭() -> None:
    assert "형식" in figure_reason({**_wall_sheet(), "options": {"height_m": 2.0}})
    other = figure_reason(_wall_sheet(height_m=1.6) | {"height_m": 1.6})
    assert other.startswith("그림 없음 — ") and "자료에 없습니다" in other
    note = [t for t in _texts(build_figure(_wall_sheet(weep_hole_area_m2=3))) if "안 닿음" in t]
    assert note and "Ø50" in note[0]


def test_양식_장은_양식이_푼_뒷길이로_그린다() -> None:
    sheet = {**_sheet(), "formula_sheet": {"vars": {"L3": 55}}}
    texts = _texts(build_figure(sheet))
    assert "뒷길이 ℓ₃ = 55㎝ (기본)" in texts and "상부 0.85 m" in texts