Aislo/resources/tester/helper_390_5_snap_step_ops.cjs

/* 390-5 스냅 간격 = 조작 단위 — 방향키 걸음(`KeyNudge.arrowStep`) · 끌기 미리보기(`StationFit.fitDrag`) ·
 * MC 측점 값 자릿수(`Frame.snapCurveStations` · 눈금 글 `stationLabel`)를 Node 로 돌려 JSON 한 줄
 * (`test_390_5_snap_step_ops.py` 가 판정 · 파이썬 짝 거울은 그쪽).
 *   node helper_390_5_snap_step_ops.cjs '<{"grid":[…],"spans":[[bc,ec]…]}>'
 */
const fs = require("fs");
const path = require("path");
const ts = require(path.join(__dirname, "..", "..", "config", "node_modules", "typescript"));

const ROOT = path.join(__dirname, "..", "..");
const cache = new Map();

function loadTs(file) {
  const full = path.resolve(file);
  if (cache.has(full)) return cache.get(full);
  const js = ts.transpileModule(fs.readFileSync(full, "utf8"), {
    compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
  }).outputText;
  const box = { exports: {} };
  cache.set(full, box.exports);
  const localRequire = (request) =>
    request.startsWith(".")
      ? loadTs(path.join(path.dirname(full), `${request}.ts`))
      : require(request);
  new Function("exports", "module", "require", js)(box.exports, box, localRequire);
  cache.set(full, box.exports);
  return box.exports;
}

const LOGIC = path.join(ROOT, "B05_Profile", "logic");
const fit = loadTs(path.join(LOGIC, "B05_Profile_RouteEdit_StationFit.ts"));
const curve = loadTs(path.join(LOGIC, "B05_Profile_UI_RouteEdit_Curve.ts"));
const frame = loadTs(path.join(LOGIC, "B05_Profile_UI_RouteEdit_Frame.ts"));
const nudge = loadTs(path.join(LOGIC, "B05_Profile_RouteEdit_KeyNudge.ts"));
const station = loadTs(path.join(ROOT, "common_util", "common_util_station.ts"));

const INTERVAL = 20;
const LIMITS = { minRadiusM: 30, limitRadiusM: 12, limitArcM: 0, intervalM: INTERVAL };
const ROUTE = [
  [0, 0],
  [93, 7],
  [171, 61],
  [262, 48],
  [337, 112],
  [431, 101],
  [503, 160],
];
const STEPS = [0.1, 1, 10, INTERVAL];

function columns(planned) {
  const n = planned.length;
  return {
    planned,
    curveOn: planned.map(() => true),
    curveRadius: planned.map(() => null),
    curveLock: planned.map(() => null),
    curveArc: planned.map(() => null),
    apexLock: planned.map((_, i) => i === 0 || i === n - 1),
  };
}

const build = (planned) =>
  curve.buildEditedPolyline(
    planned,
    planned.map(() => true),
    planned.map(() => null),
    LIMITS.minRadiusM,
  );

function mcs(planned) {
  const built = build(planned);
  return frame.curveSpans(built.vertices, built.curves).map(([a, b]) => (a + b) / 2);
}

const residue = (mc, step) => Math.abs(mc - Math.round(mc / step) * step);
const moved = (a, b) => Math.max(...a.map((v, i) => Math.hypot(v[0] - b[i][0], v[1] - b[i][1])));

// ① 방향키 — 화면 축이 30° 돌고 1 px = 0.5 m 인 지도
const turn = Math.PI / 6;
const metricAt = (x, y) => [
  100 + 0.5 * (x * Math.cos(turn) - y * Math.sin(turn)),
  200 + 0.5 * (x * Math.sin(turn) + y * Math.cos(turn)),
];
const len = ([x, y]) => Math.hypot(x, y);
const keys = {
  off: len(nudge.arrowStep("ArrowUp", false, metricAt)),
  offShift: len(nudge.arrowStep("ArrowUp", true, metricAt)),
  snap: Object.fromEntries(
    STEPS.map((step) => [
      step,
      {
        plain: len(nudge.arrowStep("ArrowRight", false, metricAt, step)),
        shift: len(nudge.arrowStep("ArrowRight", true, metricAt, step)),
      },
    ]),
  ),
};

// ② 끌기 미리보기 — 측점 No. 로 맞춘 노선에서 IP 3 을 끌어 감(간격별)
const base = fit.fitCurveStations(columns(ROUTE), LIMITS, 1);
const DRAG = 3;
const mouse = [base[DRAG][0] + 7.3, base[DRAG][1] + 4.1];
const drag = Object.fromEntries(
  STEPS.map((step) => {
    const limits = { ...LIMITS, intervalM: step };
    const now = base.map((v, i) => (i === DRAG ? mouse : v));
    const preview = fit.fitDrag(columns(now), base, DRAG, limits);
    // 앞 프레임이 다른 자리를 이미 밀어 둔 상태에서도 같은 값(쌓이지 않음)
    const stale = preview.map((v, i) => (i === DRAG ? mouse : [v[0] + 0.7, v[1] - 0.4]));
    const again = fit.fitDrag(columns(stale), base, DRAG, limits);
    // 놓을 때 정본 맞춤(`applyEdit` = fitStart → fitCurveStations)이 미리보기를 안 바꿈
    const from = fit.fitStart(columns(base), columns(preview));
    const release = fit.fitCurveStations(columns(preview), limits, from);
    const after = mcs(preview);
    const built = build(preview);
    return [
      step,
      {
        residues: after.map((mc) => residue(mc, step)),
        tol: fit.mcTolM(step),
        off: fit.offStationCount(built.vertices, built.curves, step),
        dragMoved: Math.hypot(preview[DRAG][0] - mouse[0], preview[DRAG][1] - mouse[1]),
        stale: moved(preview, again),
        release: moved(preview, release),
        before: moved(base.slice(0, DRAG - 1), preview.slice(0, DRAG - 1)),
      },
    ];
  }),
);

// ④ 끌기 훑기(441) — 편집 창 끌기 차례(`_Pointer`) 그대로: 하한 막힘 · 미리보기 측점 밖이 누를 때보다 늘면
//    그 걸음 되돌림 · 놓을 때 정본 맞춤(`applyEdit`). 측점 No. · IP 셋 × 12 방향 × 3 거리 · 고정 R(곡선표 반경 못박음).
const edits = loadTs(path.join(LOGIC, "B05_Profile_UI_RouteEdit_Edits.ts"));
const copy = (c) => ({
  ...c,
  planned: c.planned.map(([x, y]) => [x, y]),
  curveRadius: [...c.curveRadius],
});
function sweep(fixedR) {
  const start = columns(fit.fitCurveStations(columns(ROUTE), LIMITS, 1));
  if (fixedR)
    start.curveRadius = edits
      .rebuildLine(copy(start), LIMITS)
      .nodes.map((n) => (n.radius_m === null ? null : Math.round(n.radius_m * 100) / 100));
  const floor = (built) =>
    edits.curveShortfalls(built.nodes, LIMITS.limitRadiusM, LIMITS.limitArcM);
  const off = (built) => fit.offStationCount(built.vertices, built.curves, INTERVAL);
  const tally = { drags: 0, released: 0, offAfter: 0, strayed: 0, worst: [] };
  for (const K of [2, 3, 4])
    for (let deg = 0; deg < 360; deg += 30)
      for (const reach of [9, 17, 26]) {
        const hist = copy(start);
        let st = copy(hist);
        let built = edits.rebuildLine(st, LIMITS);
        const offBefore = off(built);
        let raw = null;
        let movedOnce = false;
        const preview = () => {
          raw = st.planned.map(([x, y]) => [x, y]);
          st = { ...st, planned: fit.fitDrag(st, hist.planned, K, LIMITS) };
          built = edits.rebuildLine(st, LIMITS);
        };
        const p0 = hist.planned[K];
        for (let t = 0.5; t <= reach + 1e-9; t += 0.5) {
          if (raw) raw.forEach((v, i) => (st.planned[i] = v));
          built = edits.rebuildLine(st, LIMITS);
          const before = floor(built);
          const previous = st.planned[K];
          st.planned[K] = [
            p0[0] + Math.cos((deg * Math.PI) / 180) * t,
            p0[1] + Math.sin((deg * Math.PI) / 180) * t,
          ];
          built = edits.rebuildLine(st, LIMITS);
          if (edits.shortfallCrossed(before, floor(built))) {
            st.planned[K] = previous;
            preview();
            continue;
          }
          preview();
          if (off(built) > offBefore) {
            raw.forEach((v, i) => (st.planned[i] = v));
            st.planned[K] = previous;
            preview();
            tally.strayed += 1;
            continue;
          }
          movedOnce = true;
        }
        tally.drags += 1;
        if (!movedOnce) continue;
        built = edits.rebuildLine(st, LIMITS);
        if (edits.floorStop(hist, st.planned, built.nodes, LIMITS)) continue;
        const from = fit.fitStart(hist, st);
        st = { ...st, planned: fit.fitCurveStations(st, LIMITS, from) };
        built = edits.rebuildLine(st, LIMITS);
        tally.released += 1;
        const left = fit.offStationMcs(built.vertices, built.curves, INTERVAL);
        if (left.length) {
          tally.offAfter += 1;
          if (tally.worst.length < 5) tally.worst.push({ K, deg, reach, mc: left });
        }
      }
  return tally;
}
const swept = { auto: sweep(false), fixed: sweep(true) };

// ④-2 손잡이(BC · EC) 끌기 훑기(433-21 ①) — `_Pointer` 손잡이 갈래 그대로: 맞추기 전 자리에서 셈 · 하한 막힘 ·
//      미리보기 측점 밖이 누를 때보다 늘면 그 걸음 되돌림(`guard`) · 놓을 때 정본 맞춤. IP 셋 × 두 끝 × 12 방향 × 3 거리.
function sweepHandle(fixedR, guard = true) {
  const start = columns(fit.fitCurveStations(columns(ROUTE), LIMITS, 1));
  if (fixedR)
    start.curveRadius = edits
      .rebuildLine(copy(start), LIMITS)
      .nodes.map((n) => (n.radius_m === null ? null : Math.round(n.radius_m * 100) / 100));
  const floor = (built) =>
    edits.curveShortfalls(built.nodes, LIMITS.limitRadiusM, LIMITS.limitArcM);
  const off = (built) => fit.offStationCount(built.vertices, built.curves, INTERVAL);
  const tally = { drags: 0, released: 0, offAfter: 0, strayed: 0, worst: [] };
  for (const K of [2, 3, 4])
    for (const which of ["start", "end"])
      for (let deg = 0; deg < 360; deg += 30)
        for (const reach of [9, 17, 26]) {
          const hist = copy(start);
          let st = { ...copy(hist), curveOn: [...hist.curveOn] };
          let built = edits.rebuildLine(st, LIMITS);
          const offBefore = off(built);
          const c0 = built.curves.find((c) => c.node_first === K);
          if (!c0) continue;
          const h0 = which === "start" ? c0.start : c0.end;
          let raw = null;
          let movedOnce = false;
          const preview = () => {
            raw = st.planned.map(([x, y]) => [x, y]);
            st = { ...st, planned: fit.fitDrag(st, hist.planned, K, LIMITS) };
            built = edits.rebuildLine(st, LIMITS);
          };
          for (let t = 0.5; t <= reach + 1e-9; t += 0.5) {
            if (raw) raw.forEach((v, i) => (st.planned[i] = v));
            built = edits.rebuildLine(st, LIMITS);
            const c = built.curves.find((entry) => entry.node_first === K);
            const to = [
              h0[0] + Math.cos((deg * Math.PI) / 180) * t,
              h0[1] + Math.sin((deg * Math.PI) / 180) * t,
            ];
            const moved = c
              ? curve.dragHandleTo(
                  st.planned[K - 1],
                  [c.apex[0], c.apex[1]],
                  st.planned[K + 1],
                  which,
                  to,
                )
              : null;
            if (!moved) {
              if (raw) preview();
              continue;
            }
            const before = floor(built);
            const kept = [st.planned[K], st.curveRadius[K], st.curveOn[K]];
            const back = () => {
              raw?.forEach((v, i) => (st.planned[i] = v));
              [st.planned[K], st.curveRadius[K], st.curveOn[K]] = kept;
              built = edits.rebuildLine(st, LIMITS);
              preview();
            };
            st.planned[K] = moved.apex;
            st.curveRadius[K] = Math.max(
              edits.radiusFloorM(
                built.nodes[K]?.inner_angle_deg,
                LIMITS.limitRadiusM,
                LIMITS.limitArcM,
              ),
              Math.round(moved.radius * 100) / 100,
            );
            st.curveOn[K] = true;
            built = edits.rebuildLine(st, LIMITS);
            if (edits.shortfallCrossed(before, floor(built))) {
              back();
              continue;
            }
            preview();
            if (guard && off(built) > offBefore) {
              back();
              tally.strayed += 1;
              continue;
            }
            movedOnce = true;
          }
          tally.drags += 1;
          if (!movedOnce) continue;
          built = edits.rebuildLine(st, LIMITS);
          if (edits.floorStop(hist, st.planned, built.nodes, LIMITS)) continue;
          const from = fit.fitStart(hist, st);
          st = { ...st, planned: fit.fitCurveStations(st, LIMITS, from) };
          built = edits.rebuildLine(st, LIMITS);
          tally.released += 1;
          const left = fit.offStationMcs(built.vertices, built.curves, INTERVAL);
          if (left.length) {
            tally.offAfter += 1;
            if (tally.worst.length < 5) tally.worst.push({ K, which, deg, reach, mc: left });
          }
        }
  return tally;
}
const sweptHandle = {
  auto: sweepHandle(false),
  fixed: sweepHandle(true),
  unguarded: { auto: sweepHandle(false, false), fixed: sweepHandle(true, false) },
};

// ③ MC 측점 값 · 눈금 글
const input = JSON.parse(process.argv[2] || '{"grid":[],"spans":[]}');
const snapped = Object.fromEntries(
  [
    ["0.1", 0.1],
    ["1", 1],
    ["10", 10],
    ["station", null],
  ].map(([key, step]) => [key, frame.snapCurveStations(input.grid, input.spans, step)]),
);
const labels = {
  int: station.stationLabel(119.8, 20),
  one: station.stationLabel(119.8, 20, 1),
  oneWhole: station.stationLabel(120, 20, 1),
  oneSmall: station.stationLabel(100.1, 20, 1),
  oneDefault: station.stationLabel(119.84, 20),
};

console.log(
  JSON.stringify({
    keys,
    drag,
    swept,
    sweptHandle,
    snapped,
    labels,
    scale: [0.1, 1, 10, null].map(frame.mcScale),
  }),
);