Aislo/resources/tester/test_234_1_structure_station.py

# -*- coding: utf-8 -*-
"""234-1 구조물 · 관 기준 측점 = 정수 m · 일반 측점 1 m 안 붙기 · [정수 맞춤] 단추.

9-29 「저장값 소수 · 표기만 정수」(20장)를 「저장값도 정수 m」로 바꿈
(사용자 확정 10-10 · 조사 AF 7절 A+B+C).
맞춤 규칙 한 벌 = 파이썬 `common_util_structure_station.py` ↔
TS `common_util_structure_station.ts`(거울).
화면 쪽 진짜 TS(폼 칸 · 구조물 옮김 · 단추 · 배수유역도 관 · 계획고 편집 따라감)는
`helper_234_1_structure_station.cjs` 가 Node 로 돌린다. 서버 자동 배치 · 노선 재투영은 파이썬으로.
"""

from __future__ import annotations

import json
import subprocess
import sys
from pathlib import Path

import pytest

HERE = Path(__file__).resolve().parent
ROOT = HERE.parents[1]
if str(ROOT) not in sys.path:
    sys.path.insert(0, str(ROOT))

from common_util.common_util_drainage_pipes import PipePoint, project_pipe_points  # noqa: E402
from common_util.common_util_route_geometry import RouteVertex, StructureCandidate  # noqa: E402
from common_util.common_util_structure_station import (  # noqa: E402
    general_stations,
    snap_candidates,
    snap_structure_station,
)

TOTAL = 279.8
STATIONS = general_stations(TOTAL, 20.0)
# (입력, 기대) — 소수 → 정수 · 일반 측점 1 m 안 붙기 · 끝 측점(소수) 붙기
CASES = [
    (80.17, 80.0),  # 관 80.17 = 카드 80 한 자리
    (80.6, 80.0),  # 1 m 안 → 일반 측점
    (80.99, 80.0),
    (81.0, 81.0),  # 꼭 1 m 는 밖 — 81 에 둘 수 있음(방향키가 갇히지 않음)
    (50.5, 51.0),  # .5 는 올림(파이썬 · TS 같은 꼴)
    (50.4, 50.0),
    (263.31, 263.0),
    (263.206, 263.0),
    (127.86, 128.0),
    (0.3, 0.0),
    (279.3, 279.8),  # 끝 측점 1 m 안 → 끝 측점(정수가 아닌 일반 측점)
    (278.6, 279.8),  # 반올림 279 가 끝 측점 1 m 안
    (277.4, 277.0),
]
STEPS = [
    ((80.0, 1), 81.0),
    ((80.17, 1), 81.0),
    ((80.17, -1), 80.0),  # 79.17 은 일반 측점 80 의 1 m 안
    ((279.8, -1), 278.0),  # 279 는 끝 측점에 붙어 제자리 → 한 걸음 더
    ((279.8, 1), 279.8),  # 노선 밖은 제자리
    ((0.0, -1), 0.0),
]
STRUCTURES = [
    {"structure_id": "sign", "placement": "point", "chainage_m": 127.86},
    {
        "structure_id": "wall",
        "placement": "interval",
        "chainage_m": 80.17,
        "start_m": 75.17,
        "end_m": 95.67,
    },
    {"structure_id": "ok", "placement": "point", "chainage_m": 40.0},
    {"structure_id": "near", "placement": "point", "chainage_m": 20.4},
]
PIPES = [80.17, 120.0, 120.3, 263.31, 140.0]

pytestmark = pytest.mark.skipif(
    not (ROOT / "config" / "node_modules" / "typescript").is_dir(),
    reason="프론트엔드 의존성 미설치",
)


@pytest.fixture(scope="module")
def ts(tmp_path_factory) -> dict:
    source = tmp_path_factory.mktemp("s234") / "in.json"
    source.write_text(
        json.dumps(
            {
                "stations": STATIONS,
                "samples": [value for value, _ in CASES],
                "steps": [list(args) for args, _ in STEPS],
                "structures": STRUCTURES,
                "pipes": PIPES,
            }
        ),
        encoding="utf-8",
    )
    proc = subprocess.run(  # noqa: S603 — 고정 실행 파일
        ["node", str(HERE / "helper_234_1_structure_station.cjs"), str(source)],
        capture_output=True,
        text=True,
        encoding="utf-8",
        cwd=str(ROOT),
        check=False,
    )
    assert proc.returncode == 0, proc.stderr
    return json.loads(proc.stdout)


def test_general_stations() -> None:
    assert STATIONS == [float(index * 20) for index in range(14)] + [279.8]


@pytest.mark.parametrize(("value", "expected"), CASES)
def test_snap_python(value: float, expected: float) -> None:
    assert snap_structure_station(value, STATIONS) == expected
    # 두 번 맞춰도 같음
    assert snap_structure_station(expected, STATIONS) == expected


def test_mirror_python_ts(ts) -> None:
    assert ts["snap"] == [snap_structure_station(value, STATIONS) for value, _ in CASES]
    assert ts["snapTwice"] is True


def test_arrow_step_one_metre(ts) -> None:
    assert ts["step"] == [expected for _, expected in STEPS]


def test_general_registry_skips_irregular(ts) -> None:
    assert ts["general"] == STATIONS  # 구조물 측점 80.17(irregular)은 일반 측점 아님
    assert ts["defaultSnap"] == 80


def test_form_input_integer(ts) -> None:
    assert ts["remainderStep"] == "1"
    assert ts["typed"] == 80  # 입력 4+0.17 = 80.17 → 80
    assert ts["typedNear"] == 80  # 4+0.6 → 일반 측점 80 에 붙음
    assert ts["typedOne"] == 81
    assert ts["untouched"] == 80.17  # 안 고친 옛 값은 그대로(단추 몫)


def test_moved_structure_range_ends_integer(ts) -> None:
    assert ts["movedPoint"]["chainage_m"] == 128
    wall = ts["movedWall"]
    assert (wall["chainage_m"], wall["start_m"], wall["end_m"]) == (80, 75, 96)
    drag = ts["movedDrag"]
    assert (drag["chainage_m"], drag["start_m"], drag["end_m"]) == (133, 133, 145)


def test_snap_button_plan_and_run(ts) -> None:
    plan = ts["plan"]
    assert [entry["index"] for entry in plan["structures"]] == [0, 1, 3]
    assert plan["pipes"] == [[80.17, 80], [263.31, 263]]
    assert plan["skipped"] == 1  # 120.3 → 120 자리에 관이 이미 있음
    run = ts["run"]
    assert run["count"] == 5 and run["emits"] == 1 and run["closed"] == 1
    assert [s["chainage_m"] for s in run["structures"]] == [128, 80, 40, 20]
    assert (run["structures"][1]["start_m"], run["structures"][1]["end_m"]) == (75, 96)
    # 관은 하나씩 폼 [수정]과 같은 길 — 시설 속성이 그대로 실림
    assert [(m["from"], m["to"]) for m in run["moves"]] == [(80.17, 80), (263.31, 263)]
    assert run["moves"][0]["attributes"]["options"] == {"pipe_kind": "흄관"}
    assert run["moves"][0]["attributes"]["facility"] == "pipe"
    assert "5건" in run["confirmText"]
    assert run["toasts"][-1]["message"].startswith("정수 맞춤 5건")
    assert "1건은 그대로" in run["toasts"][-1]["message"]
    # 두 번째 누름 — 옮길 것 없음(겹친 관만 알림)
    assert ts["second"]["count"] == 0
    assert "1건은 맞출 자리에 다른 관" in ts["second"]["toasts"][0]["message"]


def test_plan_edit_follows_batch_move(ts) -> None:
    # 213-2 규칙만으로는 여럿을 한꺼번에 옮기면 못 따라감(null) → 맞춘 자리로 따라감
    assert ts["follow"] == [{"old": None, "next": 80}, {"old": None, "next": 263}]


def test_drainage_map_pipe_integer(ts) -> None:
    assert ts["editor"] == [141, 200]  # 옮김 141.37 → 141 · 추가 200.6 → 일반 측점 200


def _vertices() -> list[RouteVertex]:
    return [RouteVertex(x=0.0, y=0.0, z=0.0, chainage_m=0.0), RouteVertex(TOTAL, 0.0, 0.0, TOTAL)]


def test_server_auto_placement_integer() -> None:
    vertices = _vertices()
    placed = [
        StructureCandidate(chainage_m=80.374, x=80.374, y=0.0, reason="stream"),
        StructureCandidate(chainage_m=150.6, x=150.6, y=0.0, reason="spacing"),
        StructureCandidate(chainage_m=150.9, x=150.9, y=0.0, reason="spacing"),
    ]
    snapped = snap_candidates(placed, vertices)
    assert [(p.chainage_m, p.x, p.reason) for p in snapped] == [
        (80.0, 80.0, "stream"),
        (151.0, 151.0, "spacing"),  # 같은 자리로 모인 둘째는 버림
    ]


def test_server_reprojection_integer() -> None:
    points = [PipePoint(chainage_m=70.0, x=80.374, y=3.0, start_m=75.0, end_m=85.0)]
    moved = project_pipe_points(points, _vertices())
    assert moved[0].chainage_m == 80.0
    assert (moved[0].start_m, moved[0].end_m) == (85.0, 95.0)  # 구간은 같은 만큼 밀림


def test_wiring_source() -> None:
    """받는 곳마다 맞춤이 걸렸는지(짝 머리 · 폼 · 끌기 · 방향키 · 관 · 단추)."""

    def read(rel: str) -> str:
        return (ROOT / rel).read_text(encoding="utf-8")

    assert "common_util_structure_station.py" in read(
        "common_util/common_util_structure_station.ts"
    )
    assert "common_util_structure_station.ts" in read(
        "common_util/common_util_structure_station.py"
    )
    assert "movedStructure(structures[index], toChainageM)" in read(
        "B05_Profile/B05_Profile_UI_Structures_Panel.ts"
    )
    assert "snapDock(list" in read("B05_Profile/B05_Profile_UI_Structures_Panel.ts")
    assert "stepStructureStation(fromM" in read("B05_Profile/B05_Profile_UI_Profile_Panel_Tools.ts")
    b06 = read("B06_Section/B06_Section_UI_Page_Structures_Panel.ts")
    assert "const to = snapStructureStation(toChainageM)" in b06
    assert "Math.abs(fromChainageM - toChainageM) > 0.005" in b06
    assert "setGeneralStations" in read("B06_Section/B06_Section_Section_Store.ts")
    assert "snap_candidates(" in read("common_util/common_util_drainage_detail.py")
    for rel in (
        "B05_Profile/B05_Profile_UI_Drainage_Panel.ts",
        "B05_Profile/B05_Profile_UI_IrregularStations.ts",
        "B05_Profile/B05_Profile_UI_Drainage_Parts.ts",
        "B05_Profile/B05_Profile_UI_Structures_Panel_Commit.ts",
    ):
        assert "< 0.51" not in read(rel), rel  # 찾는 폭 = PIPE_MATCH_M 한 값