Files
Aislo/resources/tester/helper_440_draft_card_ids.cjs
T
eomsangdonandClaude Opus 5.5 e51dd2a801 fix(450 B06 측점 갈아끼움): MC 곡선 열쇠 이음 · 자리 같은 단면 서버 표본 유지 · 구간값 죽은 길 걷음 · 표 위 CAD 한도
- 433-4 갈아끼움이 curveMoves 거꾸로 맵으로 옛 MC 횡단을 이어 받음 — 설계 · 측점 id · moves 짝 남음
- 433-11 자리 · 축 같은 앞 단면은 지반 표본 · 상단측 · 중심고 그대로 — 덧 측점 넣기 · 빼기 뒤 누가토량 = 서버
- 433-19 Span_Control.update(culvertopt 큐) 걷음 — 구간 줄은 다단 벽만
- 433-20 표 위 CAD 요소 2000 넘음 = 초안에 안 씀 · 알림(서버 max_length 짝)
- 시험 test_433_4 · test_433_11 · test_433_19_20 새로 · 346_2 단언 · 440 헬퍼 로더 맞춤

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-18 21:34:51 +09:00

124 lines
4.2 KiB
JavaScript

// 440 — 노선 초안 동안 B06 카드(묶음 새 상세) 번호가 찾기 상세(갈아끼운 캐시)에 있음.
// 저장 상세 → cross 입력 모음(`pipelineCrossSource` · 진짜) → 새 상세(`draftSectionDetail` · 진짜) 대 갈아끼움(`swapCrossSections` · 진짜).
const fs = require("fs");
const path = require("path");
const ROOT = path.resolve(__dirname, "..", "..");
const ts = require(path.join(ROOT, "config", "node_modules", "typescript"));
const idOf = (m) => `station_${String(Math.round(m * 1000)).padStart(12, "0")}`;
const REAL =
/(B05_Profile_Pipeline_Detail|B06_Section_Station_Swap|design_pipeline_cross|common_util_station_key)$/;
const STUBS = {
B05_Profile_Pipeline_Grade: { stationIdOf: idOf },
common_util_station: { stationLabel: (m) => String(m) },
B05_Profile_UI_Profile_Data: { toDesignProfile: () => ({}) },
b_page_state: { readState: () => null },
B06_Section_Section_Canon: { savedDesigns: () => null },
B06_Section_UI_Standard_Panel: {
effectiveStandardCross: () => ({ road_width_m: 3 }),
readRockBoundaryDefault: () => null,
},
};
const cache = new Map();
function load(full) {
if (cache.has(full)) return cache.get(full).exports;
const js = ts.transpileModule(fs.readFileSync(full, "utf8"), {
compilerOptions: { module: ts.ModuleKind.CommonJS, target: ts.ScriptTarget.ES2020 },
}).outputText;
const box = { exports: {} };
cache.set(full, box);
const req = (r) => {
const name = r.split("/").pop();
if (STUBS[name]) return STUBS[name];
if (REAL.test(r)) return load(path.resolve(path.dirname(full), r + ".ts"));
throw new Error(`stub 없음: ${r}`);
};
new Function("exports", "module", "require", js)(box.exports, box, req);
return box.exports;
}
const detailMod = load(path.join(ROOT, "B05_Profile/logic/B05_Profile_Pipeline_Detail.ts"));
const swapMod = load(path.join(ROOT, "B06_Section/logic/B06_Section_Station_Swap.ts"));
const crossMod = load(path.join(ROOT, "A00_Common/design/design_pipeline_cross.ts"));
const sec = (m, kind, extra = {}) => ({
station_id: idOf(m),
chainage_m: m,
label: "",
kind,
center_x: m,
center_y: 0,
samples: [],
design: { design_elevation_m: 100 },
...extra,
});
// 저장 상세: 일반 340 · 관 351(배수관) · 일반 360
const saved = {
longitudinal: { stations: [], design_profiles: [], length_m: 400, samples: [] },
cross_sections: [
sec(340, "regular"),
sec(351, "irregular", { culvert: { chainage_m: 351, diameter_m: 0.8 } }),
sec(360, "regular"),
],
};
const st = (key, m, kind) => ({
key,
chainageM: m,
kind,
x: m + 0.5,
y: 3,
left: [0, 1],
azimuthDeg: 0,
ground: null,
});
const savedStations = [
st("grid:340", 340, "grid"),
st("pipe:p35100", 351, "pipe"),
st("grid:360", 360, "grid"),
];
// 노선 초안: 교점 끌기 → 관이 좌표 따라 354 로(410) · 일반 측점은 같은 m
const draftStations = [
st("grid:340", 340, "grid"),
st("pipe:p35100", 354, "pipe"),
st("grid:360", 360, "grid"),
];
const oldKeys = savedStations.map((s) => s.key);
const source = crossMod.pipelineCrossSource("p1", saved, savedStations, null);
const draft = detailMod.draftSectionDetail(
saved,
{ stations: draftStations, longitudinal: { chainageM: [0, 400], z: [0, 0] } },
{},
null,
source.specs,
20,
);
const swapped = swapMod.swapCrossSections(saved, draftStations, oldKeys, 20).detail;
const ids = (detail) => detail.cross_sections.map((s) => s.station_id);
const swappedIds = new Set(ids(swapped));
const pipeCard = draft.cross_sections[1];
// 새 측점(초안에서 처음 생긴 일반 측점) = 누가거리 번호
const added = detailMod.draftSectionDetail(
saved,
{
stations: [...draftStations, st("grid:380", 380, "grid")],
longitudinal: { chainageM: [0, 400], z: [0, 0] },
},
{},
null,
source.specs,
20,
);
console.log(
JSON.stringify({
draftIds: ids(draft),
allFoundInSwapped: ids(draft).every((id) => swappedIds.has(id)),
sameOrder: JSON.stringify(ids(draft)) === JSON.stringify(ids(swapped)),
pipeCard: [
pipeCard.station_id,
pipeCard.chainage_m,
pipeCard.culvert && pipeCard.culvert.chainage_m,
],
longIds: draft.longitudinal.stations.map((s) => s.station_id),
addedId: added.cross_sections[3].station_id,
}),
);