Aislo/resources/tester/test_429_save_path.py

"""PLAN 429 — [저장] 길 정합(분석 424 9장 ④⑤⑧⑨).

- ④ 노선 [저장] 뒤 횡단 저장 = 고침이 없어도 한 번(서버가 지금 종단으로 횡단을 다시 셈 · 뒤에
  나간 계획고 초안이 횡단 설계 높이에 실림) · 서버 [저장]이 횡단 설계 높이를 저장 종단에서 냄.
- ⑤ 상단측 차례(`sync_uphill_overrides_into_designs`)가 소단 · 깎기 경사 · 조절 값을 남김.
- ⑨ 추가 측점 = 계산 묶음 입력(stations 부터 다시) · 가게 초안 바뀜 · 되돌리기 → 묶음에 넣음.
  [저장] 차례 실패 = 그 차례에서 멈춤(`test_design_store_save.py`).
Node 헬퍼 = `helper_429_save_path.cjs`.
"""

import asyncio
import json
import subprocess
from pathlib import Path

import pytest

from B06_Section.B06_Section_Engine_Design import compute_cross_design
from B06_Section.B06_Section_Router_Design import enforce_design_lines
from config.config_system import STANDARD_CROSS_SECTION

HERE = Path(__file__).parent
ROOT = HERE.parents[1]


@pytest.fixture(scope="module")
def out():
    proc = subprocess.run(
        ["node", str(HERE / "helper_429_save_path.cjs")],
        capture_output=True,
        text=True,
        encoding="utf-8",
        timeout=60,
    )
    assert proc.returncode == 0, proc.stderr
    return json.loads(proc.stdout)


def _ground() -> list[dict]:
    """왼쪽이 높은 비탈 — 왼쪽 깎기 · 오른쪽 쌓기(편절)."""
    return [
        {"offset_m": o / 2, "elevation_m": round(100.0 + 0.25 * o / 2, 4), "valid": True}
        for o in range(-40, 41)
    ]


# ── ④ ────────────────────────────────────────────────────────────────────────


def test_노선_저장_뒤_고침이_없어도_횡단_저장_한_번(out):
    """472-6 6-B — 노선 바뀐 [저장]은 서버가 횡단 차례를 늘 한 번(넘긴 patch 가 없어도 · 뒤에 나간 계획고로
    다시 셈) · 브라우저 횡단 조각 = 풍선 자리 늘 실음(445 H5 — 횡단 보기 [저장]과 같은 본문)."""
    server = (ROOT / "B06_Section" / "B06_Section_Router_DesignSave.py").read_text(encoding="utf-8")
    moved = server[server.index("carry_cross(project_id, route_id") :]
    moved = moved[: moved.index("    elif request.cross is not None:")]
    assert 'body["cross_patches"] = carried.get("patches") or None' in moved
    assert "crossing = save_sections(project_id, route_id" in moved
    assert 'cross = await step("cross", crossing)' in server.replace("\n", " ").replace("  ", "")
    apply = (ROOT / "B05_Profile" / "B05_Profile_UI_RouteEdit_Apply.ts").read_text(encoding="utf-8")
    part = apply[apply.index("export function routeCarryPart") :]
    assert "balloon_offsets: balloonOffsetsPayload()," in part


def test_서버_저장이_횡단_높이를_저장_종단에서(tmp_path):
    """초안 계획고(101.2)가 종단 정본에 나간 뒤 [저장] 다시 셈 = 그 높이 · 옛 설계(100.0) 아님."""
    old = compute_cross_design(
        _ground(), 100.0, standard=STANDARD_CROSS_SECTION, ground_type="soil",
        section_mode="left_cut", ditch_side="left",
    )  # fmt: skip
    longitudinal = {
        "design_profiles": [
            {"samples": [{"chainage_m": 0.0, "elevation_m": 101.2},
                         {"chainage_m": 40.0, "elevation_m": 101.2}]}
        ]
    }  # fmt: skip
    sections = [{"chainage_m": 20.0, "samples": _ground(), "design": old}]
    assert enforce_design_lines(longitudinal, sections, tmp_path, STANDARD_CROSS_SECTION) == 1
    assert sections[0]["design"]["design_elevation_m"] == pytest.approx(101.2, abs=1e-6)


# ── ⑤ ────────────────────────────────────────────────────────────────────────


def test_상단측_차례가_소단_깎기경사_조절값_남김(tmp_path, monkeypatch):
    import B05_Profile.B05_Profile_Router_Confirm as confirm
    import B06_Section.B06_Section_Repository as repo
    import B06_Section.B06_Section_Repository_Bulk as bulk
    import B06_Section.B06_Section_Router_Design as design_mod

    user = {
        "cut_slope_ratio_user": 0.7,
        "berm": {"width_m": 1.0, "interval_m": 3.0, "slope_deg": 0.0, "depth_m": 1.0},
        "berm_depth_left_m": 2.0,
        "basin_adjust": {"w": 1.5},
        "structure_note": "글",
        "shoulder_extend_right_m": 0.3,
    }
    before = compute_cross_design(
        _ground(), 100.0, standard=STANDARD_CROSS_SECTION, ground_type="soil",
        section_mode="right_cut", ditch_side="right",
    )  # fmt: skip
    stored = {**before, **user}
    long_file = tmp_path / "long.json"
    long_file.write_text("{}", encoding="utf-8")

    async def designs(_connection, _route_id):
        return [{"chainage_m": 20.0, "design": stored}]

    async def longitudinal(*_args):
        return {"data": {"options": {"standard_cross_section": STANDARD_CROSS_SECTION}}}

    written: list = []

    async def merge(_connection, *, route_id, entries, replace, project_id=None):
        written.extend(entries)

    monkeypatch.setattr(repo, "get_cross_section_designs", designs)
    monkeypatch.setattr(confirm, "get_longitudinal_section", longitudinal)
    monkeypatch.setattr(bulk, "merge_cross_section_designs", merge)
    monkeypatch.setattr(design_mod, "resolve_longitudinal_path", lambda *_: long_file)
    monkeypatch.setattr(
        design_mod, "read_cross_design_inputs", lambda *_a: (_ground(), 100.0, False, {})
    )
    monkeypatch.setattr(design_mod, "ford_surface_drops", lambda _root: [])

    asyncio.run(
        confirm.sync_uphill_overrides_into_designs(
            None, "p", 1, tmp_path, "long.json", [{"chainage_m": 20.0, "side": "left"}]
        )
    )
    assert len(written) == 1
    chainage, after = written[0]
    assert chainage == 20.0 and before["ditch_type"] is None  # 측구 끔 저장분도 셈
    for key, value in user.items():
        assert after[key] == value, key  # 값 남음
    assert after["cut_slope_ratio"] == pytest.approx(0.7)  # 깎기 경사가 기하에 실림(키만 아님)
    assert after["shoulder_extend_right_m"] == pytest.approx(0.3)


# ── ⑨ ────────────────────────────────────────────────────────────────────────


def test_추가_측점이_묶음_입력(out):
    assert "input.plusStations" in out["stationsDeps"]
    assert out["plusRan"][0] == "stations" and "route" not in out["plusRan"]  # stations 부터
    assert "cross" in out["plusRan"]  # 뒤 단계까지 이어짐
    assert out["plusSeen"] == [40]
    assert out["sameValue"] is None and out["sameRan"] == []  # 같은 값은 안 셈


def test_가게_추가_측점_초안이_묶음에(out):
    assert out["fed"] == [["plus", [12, 30]], ["plus", [12]]]  # 초안 · 비우면 저장분
    assert out["restoreFed"] == [["plus", [12, 55]]]  # 되돌리기 = 입력과 다르면 넣음