Aislo/resources/tester/test_283_route_reset_confirm.py

# -*- coding: utf-8 -*-
"""283 · 492-2 노선 모양 바뀐 [저장] = 초기화 — 브라우저 판정 · 띠 · 확인 창 · 저장 뒤 알림.

거울(파이썬 = 서버 정본 판정 · TS = 브라우저 띠 · 확인 창 · 같은 값):
  `B05_Profile_Engine_Grade_Carry.route_shape_changed` ↔ `logic/B05_Profile_Grade_Carry.ts` routeShapeChanged.
판정 입력 = 저장 노선(그린 선) 대 초안이 그릴 선(`draftLine`) — 스냅 · 간격 · 지형만 바뀜 = 아님.
[취소] = 요청 0 — `design_save` 가 잠금 막 · 서버 요청보다 먼저 묻는지(소스 차례).
"""

from __future__ import annotations

import copy
import json
import subprocess
import sys
from pathlib import Path

import pytest

HERE = Path(__file__).resolve().parent
ROOT = HERE.parents[1]
if str(ROOT) not in sys.path:
    sys.path.insert(0, str(ROOT))

from B05_Profile import B05_Profile_Engine_Grade_Carry as grade_carry  # noqa: E402

pytestmark = pytest.mark.skipif(
    not (ROOT / "config" / "node_modules" / "typescript").is_dir(),
    reason="프론트엔드 의존성 미설치",
)

NODES = [[0.0, 0.0], [200.0, 0.0], [400.0, 150.0], [600.0, 150.0], [800.0, 0.0]]


def _draft(nodes=NODES, **over) -> dict:
    n = len(nodes)
    draft = {
        "rev": 0,
        "nodes": copy.deepcopy(nodes),
        "curveOn": [True] * n,
        "curveRadius": [None] * n,
        "curveLock": [None] * n,
        "curveArc": [None] * n,
        "stationSnap": False,
        "stationSnapStep": None,
        "terrain": None,
    }
    draft.update(over)
    return draft


def _moved(index: int, dx: float, dy: float = 0.0) -> list:
    nodes = copy.deepcopy(NODES)
    nodes[index] = [nodes[index][0] + dx, nodes[index][1] + dy]
    return nodes


BASE = _draft()
SAME = {  # 선이 그대로 — 띠 · 창 없음
    "snap_on": _draft(stationSnap=True),
    "snap_step": _draft(stationSnap=True, stationSnapStep=10),
    "terrain": _draft(terrain="las"),
    "rev": _draft(rev=7),
    "tiny": _draft(_moved(2, 0.0004)),  # 0.4 mm — 1 mm 안
}
CHANGED = {  # 모양 바뀜 — 띠 · 창
    "drag20": _draft(_moved(2, 20.0)),
    "radius": _draft(curveRadius=[None, 80.0, None, None, None]),
    "add": _draft(NODES[:1] + [[100.0, 30.0]] + NODES[1:]),
    "remove": _draft(NODES[:3] + NODES[4:]),
    "curve_off": _draft(curveOn=[True, False, True, True, True]),
    "end_drag": _draft(_moved(4, 0.0, 5.0)),
}
COUNTS = {"structures": 1, "pipes": 3, "plusStations": 1, "profileEdits": 2}
RESET = {"reset": True, "dropped": {"structures": 1, "pipes": 3, "plus_stations": 1}}


@pytest.fixture(scope="module")
def ts(tmp_path_factory):
    drafts = {**SAME, **CHANGED}
    payload = {
        "min_radius_m": 30.0,
        "base": BASE,
        "drafts": drafts,
        "counts": COUNTS,
        "reset": RESET,
        "pairs": [],
    }
    source = tmp_path_factory.mktemp("s283") / "in.json"
    source.write_text(json.dumps(payload), encoding="utf-8")
    first = _run(source)
    # 거울 짝 — 저장 선 대 각 초안 선 · 같은 선 · 2 mm 흔듦
    saved = first["saved"]
    jitter = [[x + (0.002 if i == 3 else 0.0), y] for i, (x, y) in enumerate(saved)]
    pairs = [[saved, line] for line in first["lines"].values()] + [[saved, saved], [saved, jitter]]
    payload["pairs"] = pairs
    source.write_text(json.dumps(payload), encoding="utf-8")
    out = _run(source)
    out["pair_inputs"] = pairs
    return out


def _run(source: Path) -> dict:
    proc = subprocess.run(  # noqa: S603 — 고정 실행 파일
        ["node", str(HERE / "helper_283_route_reset_confirm.cjs"), str(source)],
        capture_output=True,
        text=True,
        encoding="utf-8",
        timeout=120,
        check=False,
    )
    assert proc.returncode == 0, proc.stderr
    return json.loads(proc.stdout)


# ── 판정 ─────────────────────────────────────────────────────────────────────


@pytest.mark.parametrize("name", list(SAME))
def test_스냅_간격_지형만_띠_창_없음(ts, name):
    assert ts["changed"][name] is False


@pytest.mark.parametrize("name", list(CHANGED))
def test_모양_바뀐_초안_띠_창(ts, name):
    assert ts["changed"][name] is True


def test_초안_없음_아님_저장선_모름_바뀜(ts):
    assert ts["nullDraft"] is False
    assert ts["unknownSaved"] is True


def test_거울_파이썬_판정_같은값(ts):
    judge = getattr(grade_carry, "route_shape_changed", None)
    if judge is None:
        pytest.skip("서버 판정 route_shape_changed 아직 없음(492-1 sub4 합침 전)")
    for (old, new), got in zip(ts["pair_inputs"], ts["pairs"]):
        assert judge(old, new) is got
    assert ts["pairs"][-2] is False  # 같은 선
    assert ts["pairs"][-1] is True  # 2 mm


# ── 확인 창 · [취소] ──────────────────────────────────────────────────────────


def test_확인창_안바뀜_묻지않음(ts):
    gate = ts["gate"][0]
    assert gate["ok"] is True and gate["asked"] == [] and gate["counted"] == 0


def test_확인창_수_취소_false(ts):
    cancel, accept = ts["gate"][1], ts["gate"][2]
    assert cancel["ok"] is False and accept["ok"] is True
    for gate in (cancel, accept):
        assert len(gate["asked"]) == 1 and gate["counted"] == 1
        text = gate["asked"][0]
        assert text.startswith("노선이 바뀌어 [저장]하면 초기화")
        for part in ("구조물 1", "관 3", "추가 측점 1", "종단 편집 2", "횡단 손 입력"):
            assert part in text
        assert text.endswith("저장할까요?")


def test_추천_적용_같은글_같은수(ts):
    text = ts["applyText"]
    assert text.startswith("추천 노선을 [적용]하면 초기화")
    tail = ts["gate"][2]["asked"][0].split("초기화", 1)[1].replace("저장할까요?", "")
    assert text.split("초기화", 1)[1].replace("적용할까요?", "") == tail


def test_취소_요청0_잠금막_서버요청_앞(ts):
    src = (ROOT / "A00_Common" / "design" / "design_save.ts").read_text(encoding="utf-8")
    body = src[src.index("export async function saveDesign(") :]
    ask = body.index("confirmRouteReset(")
    assert ask < body.index("showLoadingOverlay()") < body.index("postDesignSave(")
    assert "return false" in body[ask : body.index("showLoadingOverlay()")]


def test_띠_글(ts):
    assert ts["band"].startswith("노선이 바뀌어 [저장] 하면 초기화")
    for part in ("구조물", "관", "추가 측점", "종단", "횡단 손 입력"):
        assert part in ts["band"]


# ── 저장 뒤 알림 ─────────────────────────────────────────────────────────────


def test_저장뒤_알림_dropped(ts):
    assert ts["notice"] == (
        "노선이 바뀌어 초기화했습니다 — 지움: 구조물 1 · 관 3 · 추가 측점 1 · 새 교차 관 2"
    )
    assert ts["noticeNone"] == [None, None]