Aislo/resources/tester/test_272_berm_source.py

# -*- coding: utf-8 -*-
"""467 · 577-2 (요구 272 · 434 · 437) — 소단 원천 한 벌 = 측점에 얹은 제원(옹벽처럼).

못박는 것
  - 측점 얹기 — 구조물 → 측점마다 `section.berm`(덮는 소단 없음 = null · 겹치면 먼저 놓은 것) ·
    TS `attachBermSpecs` ↔ 파이썬 `attach_berm_specs`.
  - 다시 셈 = 얹힌 제원 · 칸 없음(아직 안 얹음) = 저장분 `design.berm` · null = 소단 없음 —
    얹힌 값 = 저장분 값 = [저장] 서버 값(`enforce_design_lines`).
  - 거울 — TS `bermSpansFromStructures` ↔ 파이썬 `load_berm_spans` ·
    TS `storedBermSpec` ↔ 파이썬 `berm_from`.
  - 세션 사본(`berm` 칸 · 시설 줄 `syncBerm`) 없음.

Node 헬퍼 `helper_272_berm_source.mjs` 가 vite ssr 로 묶은 진짜 모듈을 부름.
"""

import json
import shutil
import subprocess
import sys
from pathlib import Path

import pytest

HERE = Path(__file__).resolve().parent
ROOT = HERE.parents[1]
if str(ROOT) not in sys.path:
    sys.path.insert(0, str(ROOT))

from B06_Section.B06_Section_Engine_Structures_Wall import (  # noqa: E402
    attach_berm_specs,
    load_berm_spans,
)
from B06_Section.B06_Section_Router_Design import berm_from, enforce_design_lines  # noqa: E402
from config.config_system import (  # noqa: E402
    STANDARD_CROSS_SECTION,
    STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M,
)


def _berm(start, end, **options):
    return {
        "type_id": "berm",
        "placement": "interval",
        "start_m": start,
        "end_m": end,
        "options": options,
    }


SAVED = [_berm(0.0, 100.0, width_m=1.0, interval_m=3.0, slope_deg=0.0, depth_m=1.0)]
STRUCTURE_CASES = [
    SAVED,
    [
        _berm(50.0, 80.0, width_m=0),  # 폭 0 = 없음
        _berm(10.0, 30.0, depth_m=""),  # 빈 깊이 = 기본 1.0
        _berm(30.0, 40.0, depth_m=-2, width_m="0.7"),  # 음수 깊이 = 0 · 글 수
        _berm(60.0, 70.0, width_m="abc", interval_m=2.5, slope_deg=4),  # 못 읽는 폭 = 기본
    ],
    [{"type_id": "berm", "placement": "point", "chainage_m": 25.0, "options": {}}],
    [],
]
STORED_CASES = [
    {"width_m": 0.5},
    {"width_m": 0.5, "depth_m": -1},
    {},
    {"width_m": "0.7", "interval_m": 2},
    None,
    {"width_m": None},
    {"width_m": ""},
]
GROUND = [
    {"offset_m": o / 2, "elevation_m": round(96.0 + 0.02 * o / 2, 4), "valid": True}
    for o in range(-40, 41)
]
STORED_BERM = {"width_m": 1.0, "interval_m": 3.0, "slope_deg": 0.0, "depth_m": 1.0}
CHAINAGES = [0.0, 10.0, 25.0, 30.0, 35.0, 55.0, 65.0, 100.0, 100.5, None]
LONG = {
    "design_profiles": [
        {
            "samples": [
                {"chainage_m": 0, "elevation_m": 100},
                {"chainage_m": 200, "elevation_m": 100},
            ]
        }
    ]
}


def _project(root: Path, structures: list[dict]) -> Path:
    route = root / "B05_Profile" / "route"
    route.mkdir(parents=True)
    (route / "structures.json").write_text(
        json.dumps({"revision": 1, "structures": structures}, ensure_ascii=False), encoding="utf-8"
    )
    return root


@pytest.fixture(scope="module")
def out(tmp_path_factory):
    work = tmp_path_factory.mktemp("b272berm")
    build = subprocess.run(  # noqa: S603 — 고정 실행 파일
        [
            "node",
            str(ROOT / "config" / "node_modules" / "vite" / "bin" / "vite.js"),
            "build",
            "--configLoader",
            "runner",
            "--ssr",
            "../resources/tester/helper_272_berm_source_entry.ts",
            "--outDir",
            str(work),
            "--logLevel",
            "error",
        ],
        cwd=ROOT,
        capture_output=True,
        text=True,
        encoding="utf-8",
        timeout=300,
    )
    assert build.returncode == 0, build.stderr
    bundle = work / "bundle.mjs"
    shutil.copy(work / "helper_272_berm_source_entry.js", bundle)
    job = work / "job.json"
    job.write_text(
        json.dumps(
            {
                "standard": STANDARD_CROSS_SECTION,
                "rockDefault": STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M,
                "structureCases": STRUCTURE_CASES,
                "storedCases": STORED_CASES,
                "ground": GROUND,
                "storedBerm": STORED_BERM,
                "chainages": CHAINAGES,
            },
            ensure_ascii=False,
        ),
        encoding="utf-8",
    )
    proc = subprocess.run(  # noqa: S603
        ["node", str(HERE / "helper_272_berm_source.mjs"), str(bundle), str(job)],
        cwd=ROOT,
        capture_output=True,
        text=True,
        encoding="utf-8",
        timeout=120,
    )
    assert proc.returncode == 0, proc.stderr
    return json.loads(proc.stdout)


def test_거울_구조물_소단_구간(out, tmp_path):
    for index, (structures, ts) in enumerate(zip(STRUCTURE_CASES, out["spans"], strict=True)):
        py = load_berm_spans(_project(tmp_path / f"c{index}", structures))
        assert py is not None, index
        want = [{"start_m": s, "end_m": e, **spec} for s, e, spec in py]
        assert len(ts) == len(want), (index, ts, want)
        for got, exp in zip(ts, want, strict=True):
            assert got == pytest.approx(exp), (index, got, exp)


def test_거울_저장분_소단_제원(out):
    for spec, ts in zip(STORED_CASES, out["stored"], strict=True):
        py = berm_from(spec, {})
        if py is None:
            assert ts is None, spec
            continue
        want = {k: getattr(py, k) for k in ("width_m", "interval_m", "slope_deg", "depth_m")}
        assert ts == pytest.approx(want), spec


def test_거울_측점_얹기(out, tmp_path):
    for index, (structures, ts) in enumerate(zip(STRUCTURE_CASES, out["attach"], strict=True)):
        spans = load_berm_spans(_project(tmp_path / f"a{index}", structures))
        py = [{"chainage_m": c} for c in CHAINAGES]
        attach_berm_specs(py, spans)
        assert [("berm" in r) for r in ts] == [("berm" in r) for r in py], index
        for got, exp in zip(ts, py, strict=True):
            if exp.get("berm") is None:
                assert got.get("berm") is None, (index, got, exp)
            else:
                assert got["berm"] == pytest.approx(exp["berm"]), (index, got, exp)
    first = out["attach"][0]
    assert first[1]["berm"] == pytest.approx(STORED_BERM) and first[8]["berm"] is None
    assert "berm" not in first[-1]  # 누가거리 없음 = 칸 없음


def test_다시_셈_B05만_B06_저장_같은_값(out, tmp_path):
    r = out["refresh"]
    no_copy, same, empty = r["unattached"], r["attachedSame"], r["attachedNone"]
    assert no_copy["fill"] == same["fill"] and no_copy["cut"] == same["cut"]  # 안 얹음 = 저장분
    assert empty["fill"] != no_copy["fill"]  # 얹었는데 없음 = 소단 없음(저장분으로 안 물러섬)
    # [저장] = 서버가 구조물 정본으로 다시 셈
    root = _project(tmp_path / "save", SAVED)
    design = {"ground_type": "soil", "section_mode": "both_fill", "ditch_type": "standard"}
    sections = [{"chainage_m": 40.0, "samples": GROUND, "design": design}]
    assert enforce_design_lines(LONG, sections, root) == 1
    assert abs(sections[0]["design"]["fill_area_m2"] - same["fill"]) < 1e-3
    bare = [{"chainage_m": 40.0, "samples": GROUND, "design": dict(design)}]
    enforce_design_lines(LONG, bare, _project(tmp_path / "bare", []))
    assert abs(bare[0]["design"]["fill_area_m2"] - empty["fill"]) < 1e-3


def test_사본_없음():
    for rel in (
        "A00_Common/design/design_facility_lane.ts",
        "A00_Common/b_page_state.ts",
        "B06_Section/B06_Section_UI_Page_Persist.ts",
        "B06_Section/B06_Section_Cross_Refresh.ts",
        "A00_Common/design/design_shared.ts",
    ):
        text = (ROOT / rel).read_text(encoding="utf-8")
        for word in (
            "writeBermSpans",
            "syncBerm",
            "putBerm",
            'readState<BermSpan[]>("berm"',
            "bermAt:",
        ):
            assert word not in text, (rel, word)
    shape = (ROOT / "common_util" / "common_util_structure_shape_keys.ts").read_text(
        encoding="utf-8"
    )
    assert '"berm"' in shape


def test_시설_줄_종류_표_전_측점_안_칠함(out):
    assert out["paint"]["before"] == 0  # 종류 표 전 = 빈 측점을 종단도에 안 씀
    assert out["paint"]["after"] == 1  # 받은 뒤 한 번