Aislo/B07_DesignDetail/B07_DesignDetail_Engine_Cad_Long.py

"""B07 종단도 CAD 조립 — 30측점 N분할 + 그래프 축·격자 + 하단 측점 테이블.

납품 양식:
  - 그래프 영역: 좌측 Y축(표고 눈금·라벨), 기준선(X축, 최저 표고에서 5m 이상
    여유), 측점별 회색 세로선.
  - 테이블 영역: 측점 세로선 없이 가로 구분선 위 눈금(틱)으로 측점 표현,
    값 텍스트는 세로쓰기. 행: 곡선/측점/거리/추가거리/지반고/계획고/절토고/
    성토고/구배.
  - 곡선행: 종단곡선 BVC·EVC 세로틱 + 수평선 + R/L 표기(브래킷형).
  - 구배행: 구간 사선(상향/하향) + 가로 "구배% L=길이" + 구배 변화점에
    원(내부 세로쓰기 계획고), 노선 시·종점은 반원.
"""

import math
from typing import Any
from uuid import uuid5

from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
    _ENTITY_NS,
    DESIGN_COLOR,
    DESIGN_LAYER_ID,
    DRAWING_FORMAT,
    FRAME_LAYER_ID,
    GROUND_COLOR,
    GROUND_LAYER_ID,
    LONG_SPLIT_STATION_COUNT,
    LONG_TABLE_LAYER_ID,
    TABLE_LABEL_COLOR,
    TABLE_LINE_COLOR,
    TABLE_VALUE_COLOR,
    _design_profile_points,
    _format,
    _interpolate,
    _layer,
    _line_entity,
    _profile_alignment,
    _stations,
    _text_entity,
    infer_station_interval,
    points_from_samples,
    polyline_entity,
    station_no_label,
)
from B07_DesignDetail.B07_DesignDetail_Engine_Template import (
    entities_bbox,
    frame_entities,
    scale_fields,
)
from common_util.common_util_route_profile import design_elevation_from_longitudinal
from config.config_system import DRAWING_SCALE_LONG_H, DRAWING_SCALE_LONG_V

# 도면 좌표 = 종이 mm. 실거리 1 m가 종이에서 차지하는 mm (1/1,000 -> 1.0, 1/200 -> 5.0).
MM_H = 1000.0 / DRAWING_SCALE_LONG_H
MM_V = 1000.0 / DRAWING_SCALE_LONG_V

# 종단 전용 레이어: 그래프 축·격자(잠금 — 참조용, 편집 제외).
LONG_GRID_LAYER_ID = "b08-long-grid"
GRID_COLOR = "#5b6572"

_VERTICAL = (0.0, 1.0)  # 세로쓰기(아래→위)

# 테이블 행: (키, 헤더 라벨, 행 높이 m). 값 세로쓰기 행은 높게 잡는다.
_ROW_TALL = 9.0
_LONG_TABLE_ROWS: tuple[tuple[str, str, float], ...] = (
    ("curve", "곡선", 5.0),
    ("station", "측점", 7.0),
    ("distance", "거리", 4.5),
    ("cum_distance", "추가거리", _ROW_TALL),
    ("ground", "지반고", _ROW_TALL),
    ("design", "계획고", _ROW_TALL),
    ("cut", "절토고", _ROW_TALL),
    ("fill", "성토고", _ROW_TALL),
    ("grade", "구배", 10.0),
)
_FONT_SIZE = 2.2
_TICK_LEN = 0.8  # 측점 눈금 길이


def _circle_entity(
    seed: str, center: tuple[float, float], radius: float, layer_id: str, color: str
) -> dict[str, Any]:
    return {
        "id": str(uuid5(_ENTITY_NS, seed)),
        "type": "Circle",
        "lineColor": color,
        "lineWidth": 1,
        "layerId": layer_id,
        "shapeData": {"center": {"x": center[0], "y": center[1]}, "radius": radius},
    }


def _arc_entity(
    seed: str,
    center: tuple[float, float],
    radius: float,
    start_angle: float,
    end_angle: float,
    layer_id: str,
    color: str,
) -> dict[str, Any]:
    return {
        "id": str(uuid5(_ENTITY_NS, seed)),
        "type": "Arc",
        "lineColor": color,
        "lineWidth": 1,
        "layerId": layer_id,
        "shapeData": {
            "center": {"x": center[0], "y": center[1]},
            "radius": radius,
            "startAngle": start_angle,
            "endAngle": end_angle,
            "counterClockwise": True,
        },
    }


def longitudinal_chunks(longitudinal: dict[str, Any]) -> list[dict[str, Any]]:
    """측점 30개 단위 분할 목록. 각 항목: {id, label, start_m, end_m}.

    30개 이하면 단일 도면(id="longitudinal", 기존 manifest 호환). 초과 시
    경계 측점 1개를 중복시켜 도면 간 선이 이어지게 한다(납품 도면 관례).
    """
    stations = sorted(_stations(longitudinal), key=lambda s: float(s["chainage_m"]))
    if not stations:
        return [{"id": "longitudinal", "label": "종단도", "start_m": None, "end_m": None}]
    if len(stations) <= LONG_SPLIT_STATION_COUNT:
        return [
            {
                "id": "longitudinal",
                "label": "종단도",
                "start_m": float(stations[0]["chainage_m"]),
                "end_m": float(stations[-1]["chainage_m"]),
            }
        ]
    chunks: list[dict[str, Any]] = []
    stride = LONG_SPLIT_STATION_COUNT - 1  # 경계 1측점 중복
    index = 0
    number = 1
    while index < len(stations) - 1:
        chunk_stations = stations[index : index + LONG_SPLIT_STATION_COUNT]
        chunks.append(
            {
                "id": f"longitudinal_{number}",
                "label": f"종단도({number})",
                "start_m": float(chunk_stations[0]["chainage_m"]),
                "end_m": float(chunk_stations[-1]["chainage_m"]),
            }
        )
        index += stride
        number += 1
    return chunks


def _long_table_values(
    stations: list[dict[str, Any]],
    all_stations: list[dict[str, Any]],
    ground_points: list[tuple[float, float]],
    longitudinal: dict[str, Any],
    interval_m: float,
) -> list[dict[str, str]]:
    """청크 측점별 테이블 셀 문자열. 거리는 노선 전체 기준 직전 측점과의 차."""
    chainage_all = sorted(float(s["chainage_m"]) for s in all_stations)
    rows: list[dict[str, str]] = []
    for station in stations:
        chainage = float(station["chainage_m"])
        ground = station.get("center_z")
        ground = (
            float(ground)
            if isinstance(ground, (int, float))
            else _interpolate(ground_points, chainage)
        )
        design = design_elevation_from_longitudinal(longitudinal, chainage)
        cut = max(ground - design, 0.0) if ground is not None and design is not None else None
        fill = max(design - ground, 0.0) if ground is not None and design is not None else None
        position = chainage_all.index(chainage) if chainage in chainage_all else -1
        distance = chainage - chainage_all[position - 1] if position > 0 else None
        rows.append(
            {
                "station": station_no_label(chainage, interval_m),
                "distance": _format(distance, 1),
                "cum_distance": _format(chainage, 1),
                "ground": _format(ground),
                "design": _format(design),
                "cut": _format(cut) if cut else "",
                "fill": _format(fill) if fill else "",
            }
        )
    return rows


def _graph_grid_entities(
    drawing_id: str,
    chainages: list[float],
    x0: float,
    x1: float,
    datum_m: float,
    top_m: float,
) -> list[dict[str, Any]]:
    """그래프 영역: 기준선(X축)·Y축(표고 눈금/라벨)·측점 회색 세로선.

    x는 종이 mm, datum_m·top_m은 실제 표고(m)로 받는다 — 눈금 라벨이 표고라서
    m으로 돌고 좌표만 MM_V를 곱한다.
    """
    # 기준선을 종이 y=0으로 두고 표고 차이만 MM_V로 올린다.
    datum_y = 0.0
    top_y = (top_m - datum_m) * MM_V
    entities: list[dict[str, Any]] = [
        # 기준선(X축)
        _line_entity(
            f"{drawing_id}:lgx", (x0, datum_y), (x1, datum_y), LONG_GRID_LAYER_ID, GRID_COLOR
        ),
        # Y축
        _line_entity(
            f"{drawing_id}:lgy", (x0, datum_y), (x0, top_y), LONG_GRID_LAYER_ID, GRID_COLOR
        ),
    ]
    # Y축 표고 눈금·라벨 (5m 간격, 가로쓰기)
    level_m = datum_m
    tick_index = 0
    while level_m <= top_m + 1e-6:
        level = (level_m - datum_m) * MM_V
        entities.append(
            _line_entity(
                f"{drawing_id}:lgyt{tick_index}",
                (x0 - 1.0, level),
                (x0, level),
                LONG_GRID_LAYER_ID,
                GRID_COLOR,
            )
        )
        entities.append(
            _text_entity(
                f"{drawing_id}:lgyl{tick_index}",
                _format(level_m),
                x0 - 1.6,
                level,
                LONG_GRID_LAYER_ID,
                _FONT_SIZE,
                TABLE_LABEL_COLOR,
                align="right",
            )
        )
        level_m += 5.0
        tick_index += 1
    # 측점별 회색 세로선 (기준선 → 그래프 상단)
    for index, x in enumerate(chainages):
        entities.append(
            _line_entity(
                f"{drawing_id}:lgv{index}",
                (x, datum_y),
                (x, top_y),
                LONG_GRID_LAYER_ID,
                GRID_COLOR,
            )
        )
    return entities


def _curve_row_entities(
    drawing_id: str,
    longitudinal: dict[str, Any],
    x0: float,
    x1: float,
    y_top: float,
    row_height: float,
) -> list[dict[str, Any]]:
    """곡선행: 종단곡선(BVC~EVC) 세로틱+수평선+R/L 표기 (브래킷형)."""
    entities: list[dict[str, Any]] = []
    curves = _profile_alignment(longitudinal).get("curves")
    if not isinstance(curves, list):
        return entities
    y_line = y_top - row_height * 0.62
    y_text = y_top - row_height * 0.30
    tick = row_height * 0.24
    for index, curve in enumerate(curves):
        if not isinstance(curve, dict) or curve.get("omitted"):
            continue
        bvc = curve.get("bvc_m")
        evc = curve.get("evc_m")
        if not isinstance(bvc, (int, float)) or not isinstance(evc, (int, float)):
            continue
        start = max(float(bvc) * MM_H, x0)
        end = min(float(evc) * MM_H, x1)
        if end <= start:
            continue
        seed = f"{drawing_id}:lcurve:{index}"
        entities.append(
            _line_entity(
                f"{seed}:l", (start, y_line), (end, y_line), LONG_TABLE_LAYER_ID, TABLE_LINE_COLOR
            )
        )
        entities.append(
            _line_entity(
                f"{seed}:t0",
                (start, y_line - tick),
                (start, y_line + tick),
                LONG_TABLE_LAYER_ID,
                TABLE_LINE_COLOR,
            )
        )
        entities.append(
            _line_entity(
                f"{seed}:t1",
                (end, y_line - tick),
                (end, y_line + tick),
                LONG_TABLE_LAYER_ID,
                TABLE_LINE_COLOR,
            )
        )
        r_m = curve.get("r_m")
        l_m = curve.get("l_m")
        parts = []
        if isinstance(r_m, (int, float)):
            parts.append(f"R={r_m:g}")
        if isinstance(l_m, (int, float)):
            parts.append(f"L={l_m:g}")
        if parts:
            entities.append(
                _text_entity(
                    f"{seed}:txt",
                    " ".join(parts),
                    (start + end) / 2.0,
                    y_text,
                    LONG_TABLE_LAYER_ID,
                    _FONT_SIZE * 0.9,
                    TABLE_VALUE_COLOR,
                )
            )
    return entities


def _grade_break_points(
    segments: list[Any], x0: float, x1: float, route_start: float, route_end: float
) -> list[tuple[float, bool]]:
    """구배 변화점 목록 [(chainage, 노선 시·종점 여부)] — 청크 범위 내만."""
    boundaries: set[float] = set()
    for segment in segments:
        if not isinstance(segment, dict):
            continue
        for key in ("from_m", "to_m"):
            value = segment.get(key)
            if isinstance(value, (int, float)) and x0 - 1e-6 <= float(value) <= x1 + 1e-6:
                boundaries.add(round(float(value), 4))
    return [
        (chainage, abs(chainage - route_start) < 1e-3 or abs(chainage - route_end) < 1e-3)
        for chainage in sorted(boundaries)
    ]


def _grade_row_entities(
    drawing_id: str,
    longitudinal: dict[str, Any],
    stations: list[dict[str, Any]],
    x0: float,
    x1: float,
    y_top: float,
    row_height: float,
    route_start: float,
    route_end: float,
) -> list[dict[str, Any]]:
    """구배행: 구간 사선 + 가로 구배 표기 + 변화점 원(내부 세로쓰기 계획고).

    노선 시·종점은 반원(상반원)으로 표기한다. profile_alignment.segments가
    없으면(구 폴백 계획선) 측점 간 계획고 차이 텍스트만 표기한다.
    """
    entities: list[dict[str, Any]] = []
    y_mid = y_top - row_height * 0.5
    y_high = y_top - row_height * 0.18
    y_low = y_top - row_height * 0.82
    radius = row_height * 0.40
    segments = _profile_alignment(longitudinal).get("segments")
    if not (isinstance(segments, list) and segments):
        # 폴백: 측점 간 계획고 차이 기반 구배 텍스트
        for index in range(len(stations) - 1):
            c0 = float(stations[index]["chainage_m"])
            c1 = float(stations[index + 1]["chainage_m"])
            d0 = design_elevation_from_longitudinal(longitudinal, c0)
            d1 = design_elevation_from_longitudinal(longitudinal, c1)
            span = c1 - c0
            if d0 is None or d1 is None or span <= 0:
                continue
            entities.append(
                _text_entity(
                    f"{drawing_id}:lgrade:fb{index}",
                    f"{(d1 - d0) / span * 100:.2f}%",
                    (c0 + c1) / 2.0,
                    y_mid,
                    LONG_TABLE_LAYER_ID,
                    _FONT_SIZE * 0.9,
                    TABLE_VALUE_COLOR,
                )
            )
        return entities

    # 구간 사선 + 가로 구배/거리 표기 (원 반경만큼 안쪽으로 클리핑)
    for index, segment in enumerate(segments):
        if not isinstance(segment, dict):
            continue
        from_m = segment.get("from_m")
        to_m = segment.get("to_m")
        grade = segment.get("grade_percent")
        if not isinstance(from_m, (int, float)) or not isinstance(to_m, (int, float)):
            continue
        start = max(float(from_m) * MM_H, x0) + radius
        end = min(float(to_m) * MM_H, x1) - radius
        if end <= start:
            continue
        seed = f"{drawing_id}:lgrade:{index}"
        rising = isinstance(grade, (int, float)) and grade >= 0
        entities.append(
            _line_entity(
                f"{seed}:d",
                (start, y_low if rising else y_high),
                (end, y_high if rising else y_low),
                LONG_TABLE_LAYER_ID,
                TABLE_LINE_COLOR,
            )
        )
        if isinstance(grade, (int, float)):
            length = segment.get("length_m")
            length_text = f" L={length:g}" if isinstance(length, (int, float)) else ""
            entities.append(
                _text_entity(
                    f"{seed}:txt",
                    f"{grade:.2f}%{length_text}",
                    (start + end) / 2.0,
                    y_high + 0.2 if rising else y_low - 0.2,
                    LONG_TABLE_LAYER_ID,
                    _FONT_SIZE * 0.85,
                    TABLE_VALUE_COLOR,
                )
            )

    # 구배 변화점: 원(정원) 또는 노선 시·종점 반원 + 내부 세로쓰기 계획고
    for index, (chainage, is_route_end) in enumerate(
        _grade_break_points(segments, x0 / MM_H, x1 / MM_H, route_start, route_end)
    ):
        # chainage는 월드 거리 — 계획고 조회에 그대로 쓰고, 좌표에는 MM_H를 곱한다.
        x_paper = chainage * MM_H
        seed = f"{drawing_id}:lgradebp:{index}"
        if is_route_end:
            entities.append(
                _arc_entity(
                    seed,
                    (x_paper, y_mid),
                    radius,
                    0.0,
                    math.pi,
                    LONG_TABLE_LAYER_ID,
                    TABLE_LINE_COLOR,
                )
            )
        else:
            entities.append(
                _circle_entity(
                    seed, (x_paper, y_mid), radius, LONG_TABLE_LAYER_ID, TABLE_LINE_COLOR
                )
            )
        elevation = design_elevation_from_longitudinal(longitudinal, chainage)
        if elevation is not None:
            entities.append(
                _text_entity(
                    f"{seed}:txt",
                    _format(elevation),
                    x_paper,
                    y_mid,
                    LONG_TABLE_LAYER_ID,
                    _FONT_SIZE * 0.8,
                    TABLE_VALUE_COLOR,
                    direction=_VERTICAL,
                )
            )
    return entities


def _long_table_entities(
    drawing_id: str,
    stations: list[dict[str, Any]],
    values: list[dict[str, str]],
    longitudinal: dict[str, Any],
    table_top: float,
    interval_m: float,
    route_start: float,
    route_end: float,
) -> list[dict[str, Any]]:
    """종단 테이블: 가로 구분선 + 측점 눈금(세로선 없음) + 세로쓰기 값."""
    chainages = [float(s["chainage_m"]) * MM_H for s in stations]
    header_width = max(interval_m * MM_H, 12.0)
    left = chainages[0] - header_width
    right = chainages[-1]
    entities: list[dict[str, Any]] = []

    # 행 y 경계 (가변 행 높이)
    boundaries = [table_top]
    for _key, _header, height in _LONG_TABLE_ROWS:
        boundaries.append(boundaries[-1] - height)
    bottom = boundaries[-1]

    # 가로 구분선 + 측점 눈금(구분선 아래 짧은 틱)
    for row_index, y in enumerate(boundaries):
        entities.append(
            _line_entity(
                f"{drawing_id}:ltgrid:h{row_index}",
                (left, y),
                (right, y),
                LONG_TABLE_LAYER_ID,
                TABLE_LINE_COLOR,
            )
        )
        if row_index < len(boundaries) - 1:
            for column_index, x in enumerate(chainages):
                entities.append(
                    _line_entity(
                        f"{drawing_id}:lttick:{row_index}:{column_index}",
                        (x, y),
                        (x, y - _TICK_LEN),
                        LONG_TABLE_LAYER_ID,
                        TABLE_LINE_COLOR,
                    )
                )
    # 외곽·헤더 구분 세로선 (측점 세로선은 없음)
    for seed, x in (("v-left", left), ("v-header", chainages[0]), ("v-right", right)):
        entities.append(
            _line_entity(
                f"{drawing_id}:ltgrid:{seed}",
                (x, table_top),
                (x, bottom),
                LONG_TABLE_LAYER_ID,
                TABLE_LINE_COLOR,
            )
        )

    for row_index, (key, header, height) in enumerate(_LONG_TABLE_ROWS):
        y_top = boundaries[row_index]
        y_mid = y_top - height * 0.5
        entities.append(
            _text_entity(
                f"{drawing_id}:ltable:header:{key}",
                header,
                left + header_width / 2.0,
                y_mid,
                LONG_TABLE_LAYER_ID,
                _FONT_SIZE,
                TABLE_LABEL_COLOR,
            )
        )
        if key == "curve":
            entities.extend(
                _curve_row_entities(drawing_id, longitudinal, chainages[0], right, y_top, height)
            )
            continue
        if key == "grade":
            entities.extend(
                _grade_row_entities(
                    drawing_id,
                    longitudinal,
                    stations,
                    chainages[0],
                    right,
                    y_top,
                    height,
                    route_start,
                    route_end,
                )
            )
            continue
        for value_index, row_values in enumerate(values):
            label = row_values.get(key, "")
            if not label:
                continue
            if key == "distance":
                # 거리는 직전 측점과의 구간 중앙, 가로쓰기 (청크 첫 측점 제외)
                if value_index == 0:
                    continue
                entities.append(
                    _text_entity(
                        f"{drawing_id}:ltable:{key}:{value_index}",
                        label,
                        (chainages[value_index - 1] + chainages[value_index]) / 2.0,
                        y_mid,
                        LONG_TABLE_LAYER_ID,
                        _FONT_SIZE * 0.9,
                        TABLE_VALUE_COLOR,
                    )
                )
                continue
            # 측점·추가거리·지반고·계획고·절토고·성토고: 측점 위치 세로쓰기
            entities.append(
                _text_entity(
                    f"{drawing_id}:ltable:{key}:{value_index}",
                    label,
                    chainages[value_index],
                    y_mid,
                    LONG_TABLE_LAYER_ID,
                    _FONT_SIZE,
                    TABLE_VALUE_COLOR,
                    direction=_VERTICAL,
                )
            )
    return entities


def build_longitudinal_drawing(
    longitudinal: dict[str, Any], drawing_id: str, chunk: dict[str, Any]
) -> dict[str, Any]:
    """종단도 청크 하나를 지반선+계획선+그래프 축·격자+측점 테이블로 만든다."""
    start_m = chunk.get("start_m")
    end_m = chunk.get("end_m")

    def in_range(x: float) -> bool:
        if start_m is None or end_m is None:
            return True
        return start_m - 1e-6 <= x <= end_m + 1e-6

    ground_all = points_from_samples(longitudinal.get("samples", []), "chainage_m")
    ground_points = [point for point in ground_all if in_range(point[0])]
    design_points = [point for point in _design_profile_points(longitudinal) if in_range(point[0])]
    all_stations = _stations(longitudinal)
    stations = sorted(
        (s for s in all_stations if in_range(float(s["chainage_m"]))),
        key=lambda s: float(s["chainage_m"]),
    )
    interval_m = infer_station_interval(all_stations)

    # 좌표는 종이 mm — 거리에 MM_H, 표고는 기준선(datum) 기준으로 MM_V를 곱한다.
    elevations = [y for _x, y in [*ground_points, *design_points]]
    min_e = min(elevations) if elevations else 0.0
    max_e = max(elevations) if elevations else 10.0
    # 기준선(datum): 최저 표고에서 5m 이상 여유를 두고 5m 단위로 내림 → 종이 y=0.
    datum_m = math.floor((min_e - 5.0) / 5.0) * 5.0
    top_m = max_e + 3.0

    def paper(point: tuple[float, float]) -> tuple[float, float]:
        return (point[0] * MM_H, (point[1] - datum_m) * MM_V)

    entities: list[dict[str, Any]] = []
    ground = polyline_entity(
        drawing_id, [paper(p) for p in ground_points], GROUND_LAYER_ID, GROUND_COLOR
    )
    if ground:
        entities.append(ground)
    design = polyline_entity(
        drawing_id, [paper(p) for p in design_points], DESIGN_LAYER_ID, DESIGN_COLOR
    )
    if design:
        entities.append(design)

    if stations:
        chainages = [float(s["chainage_m"]) * MM_H for s in stations]
        entities.extend(
            _graph_grid_entities(drawing_id, chainages, chainages[0], chainages[-1], datum_m, top_m)
        )

        values = _long_table_values(stations, all_stations, ground_all, longitudinal, interval_m)
        all_chainages = sorted(float(s["chainage_m"]) for s in all_stations)
        table_top = -3.0  # 그래프-테이블 영역 분리 간격(mm, 기준선 y=0 아래)
        entities.extend(
            _long_table_entities(
                drawing_id,
                stations,
                values,
                longitudinal,
                table_top,
                interval_m,
                all_chainages[0],
                all_chainages[-1],
            )
        )

    # A1 도각: 콘텐츠가 이미 종이 mm라 도각도 실치수(1:1)로 두고 위치만 맞춘다.
    bbox = entities_bbox(entities)
    if bbox:
        entities.extend(
            frame_entities(
                drawing_id,
                bbox,
                fit=False,
                fields={
                    "도면명": "종단면도",
                    **scale_fields(("H", DRAWING_SCALE_LONG_H), ("V", DRAWING_SCALE_LONG_V)),
                },
            )
        )

    return {
        "format": DRAWING_FORMAT,
        "entities": entities,
        "layers": [
            _layer(GROUND_LAYER_ID, "원지반", locked=True),
            _layer(DESIGN_LAYER_ID, "계획선"),
            _layer(LONG_GRID_LAYER_ID, "그래프 격자", locked=True),
            _layer(LONG_TABLE_LAYER_ID, "측점표"),
            _layer(FRAME_LAYER_ID, "도각", locked=True),
        ],
    }