Aislo/B06_Section/B06_Section_Router_Design.py

"""B06 라우터의 횡단 설계 파일 읽기와 프리뷰 계산."""

import json
import logging
from pathlib import Path
from typing import Any

from B05_Profile.B05_Profile_Engine_Sections import cross_filename
from B05_Profile.B05_Profile_Structures_Repository import load_structures
from B05_Profile.B05_Profile_Structures_Schema import structure_type_map
from B06_Section.B06_Section_Engine_Culvert import load_culvert_sets
from B06_Section.B06_Section_Engine_Design import compute_cross_design
from common_util.common_util_route_profile import design_elevation_from_longitudinal
from config.config_system import STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M

logger = logging.getLogger(__name__)

PREVIEW_DESIGN_FIELDS = (
    "ground_type",
    "roadbed_width_m",
    "cut_area_m2",
    "cut_soil_area_m2",
    "cut_rock_area_m2",
    "cut_rock_kind",
    "fill_area_m2",
    "fill_ground_slope",
    "design_elevation_m",
)


def pavement_suggestions(longitudinal: dict[str, Any]) -> dict[float, bool]:
    mapping: dict[float, bool] = {}
    stations = longitudinal.get("stations")
    for station in stations if isinstance(stations, list) else []:
        suggested = station.get("pavement_suggested")
        if isinstance(suggested, bool):
            mapping[round(float(station.get("chainage_m", 0.0)), 3)] = suggested
    return mapping


def pavement_ranges(project_root: Path) -> list[tuple[float, float]]:
    """포장으로 볼 누가거리 구간 — 구조물 정본 G군 + 물넘이포장(포장 필수).

    포장 지정은 **사용자가 구간으로 준다**(2026-08-28 사용자 확정). 종단경사 자동 판정은
    더 이상 포장을 켜지 않는다 — 경고 표기(`pavement_suggested`)만 남는다.
    물넘이포장은 콘크리트 등으로 노면을 만드는 시설이라 범위 안이 항상 포장이다.
    읽기 실패는 비치명 — 빈 목록이면 사용자 지정이 없는 것과 같다.
    """
    ranges: list[tuple[float, float]] = []
    try:
        types = structure_type_map()
        for structure in load_structures(str(project_root))[1]:
            definition = types.get(structure.type_id)
            if definition is None or definition.group != "G":
                continue
            anchor = structure.chainage_m
            start = structure.start_m if structure.start_m is not None else anchor
            end = structure.end_m if structure.end_m is not None else anchor
            if start is None or end is None:
                continue
            ranges.append((min(float(start), float(end)), max(float(start), float(end))))
    except Exception:  # noqa: BLE001 — 정본을 못 읽어도 설계 계산은 이어 간다
        logger.exception("B06 포장 구간을 읽지 못했습니다 (사용자 지정 없음으로 본다)")
    for chainage, spec in load_culvert_sets(project_root).items():
        if spec.get("type") != "ford_pavement":
            continue
        half = float(spec.get("span_m") or 0.0) / 2.0
        ranges.append((chainage - half, chainage + half))
    return ranges


def paved_at(chainage_m: float, ranges: list[tuple[float, float]], stored: Any = None) -> bool:
    """이 측점을 포장으로 볼 것인가 — 구간 안이면 강제, 밖이면 사용자 저장값(기본 비포장)."""
    for start, end in ranges:
        if start - 1e-9 <= chainage_m <= end + 1e-9:
            return True
    return bool(stored) if isinstance(stored, bool) else False


# 사용자 조작값 — 포장 강제로 다시 계산해도 그대로 승계한다.
_USER_TOUCHED_KEYS = (
    "display_half_width_m",
    "inlet_structure",
    "basin_adjust",
    "revet_adjust",
    "ford_adjust",
    "box_adjust",
    "extra_wall_counts",
    "revet_link_detached",
    "revet_follow_grade",
)


def stored_standard_cross_section(longitudinal_row: dict[str, Any] | None) -> dict[str, Any] | None:
    """확정 때 저장해 둔 표준횡단면 설정값(없으면 None = config 기본값).

    사용자가 「표준 횡단면 설정」에서 고친 값은 확정 시 종단 정본 options에 실린다.
    포장 강제 재계산도 같은 값을 써야 카드가 패널과 어긋나지 않는다(2026-08-28).
    """
    options = (longitudinal_row or {}).get("data") or {}
    options = options.get("options") if isinstance(options, dict) else None
    standard = options.get("standard_cross_section") if isinstance(options, dict) else None
    return standard if isinstance(standard, dict) else None


def enforce_pavement_ranges(
    longitudinal: dict[str, Any],
    cross_sections: list[dict[str, Any]],
    project_root: Path,
    standard: dict[str, Any] | None = None,
) -> int:
    """포장 구간·물넘이 범위 안 측점을 포장으로 맞춘다 — 저장분이 비포장이어도 그렇다.

    사용자가 구간을 지정하면 그 안 횡단도에 **자동 반영**된다(2026-08-28 사용자 확정).
    포장 여부는 횡단경사·포장층을 바꾸므로 플래그만 갈아 끼우지 않고 다시 계산한다.
    사용자 조작값(반폭·구조물 조정)은 그대로 승계한다.
    """
    ranges = pavement_ranges(project_root)
    if not ranges:
        return 0
    changed = 0
    for section in cross_sections:
        design = section.get("design")
        if not isinstance(design, dict) or design.get("paved"):
            continue
        chainage = float(section.get("chainage_m", 0.0))
        if not paved_at(chainage, ranges):
            continue
        try:
            recomputed = compute_cross_design(
                section.get("samples", []),
                design_elevation_from_longitudinal(longitudinal, chainage),
                ground_type=str(design.get("ground_type") or "ripping_rock"),
                section_mode=str(design.get("section_mode") or "left_cut"),
                ditch_side=design.get("ditch_side"),
                ditch_type=str(design.get("ditch_type") or "standard"),
                paved=True,
                standard=standard,
                rock_boundary_offset_m=design.get(
                    "rock_boundary_offset_m", STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M
                ),
                two_stage_slope=bool(design.get("two_stage_slope", True)),
                ditch_enabled=design.get("ditch_enabled"),
            )
        except (ValueError, KeyError):
            continue
        for key in ("status", "pavement_suggested", *_USER_TOUCHED_KEYS):
            if design.get(key) is not None:
                recomputed[key] = design[key]
        section["design"] = recomputed
        changed += 1
    return changed


def default_section_modes(longitudinal: dict[str, Any]) -> dict[float, str]:
    mapping: dict[float, str] = {}
    stations = longitudinal.get("stations")
    for station in stations if isinstance(stations, list) else []:
        side = station.get("uphill_side")
        if side in ("left", "right"):
            mapping[round(float(station.get("chainage_m", 0.0)), 3)] = f"{side}_cut"
    return mapping


def read_cross_design_inputs(
    project_root: Path, longitudinal_file_path: str, chainage_m: float
) -> tuple[list[dict], float | None, bool]:
    root = project_root.resolve()
    longitudinal_path = (root / longitudinal_file_path).resolve()
    if root not in longitudinal_path.parents:
        raise ValueError("종단면 파일 경로가 프로젝트 저장소를 벗어났습니다.")
    if not longitudinal_path.is_file():
        raise FileNotFoundError("종단면 상세 파일을 찾을 수 없습니다.")
    longitudinal = json.loads(longitudinal_path.read_text(encoding="utf-8"))
    design_elevation = design_elevation_from_longitudinal(longitudinal, chainage_m)
    suggested = pavement_suggestions(longitudinal).get(round(chainage_m, 3), False)
    cross_dir = longitudinal_path.parent.parent / "cross_sections"
    cross_path = (cross_dir / cross_filename(chainage_m)).resolve()
    if cross_dir.resolve() not in cross_path.parents or not cross_path.is_file():
        raise FileNotFoundError("해당 측점의 횡단 상세 파일을 찾을 수 없습니다.")
    cross = json.loads(cross_path.read_text(encoding="utf-8"))
    samples = cross.get("samples") if isinstance(cross, dict) else None
    if not isinstance(samples, list):
        raise ValueError("횡단 상세 파일 형식이 올바르지 않습니다.")
    return samples, design_elevation, suggested


def attach_default_designs(
    longitudinal: dict[str, Any],
    cross_sections: list[dict[str, Any]],
    project_root: Path | None = None,
    standard: dict[str, Any] | None = None,
) -> None:
    modes = default_section_modes(longitudinal)
    pavement = pavement_suggestions(longitudinal)
    paved_ranges = pavement_ranges(project_root) if project_root else []
    for section in cross_sections:
        if section.get("design"):
            continue
        try:
            chainage = float(section.get("chainage_m", 0.0))
            suggested = pavement.get(round(chainage, 3), False)
            design = compute_cross_design(
                section.get("samples", []),
                design_elevation_from_longitudinal(longitudinal, chainage),
                ground_type="ripping_rock",
                section_mode=modes.get(round(chainage, 3), "left_cut"),
                # 포장은 사용자 구간 지정만 켠다 — 경사 제안은 경고로만 남는다(2026-08-28).
                paved=paved_at(chainage, paved_ranges),
                standard=standard,
                rock_boundary_offset_m=STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M,
            )
            design.update(status="provisional", pavement_suggested=suggested)
            section["design"] = design
        except (ValueError, KeyError):
            continue


def recompute_designs_for_alignment(
    longitudinal: dict[str, Any],
    cross_sections: list[dict[str, Any]],
    stored_designs: list[dict[str, Any]],
    standard: dict[str, Any] | None,
    rock_boundary_offsets: dict[str, float] | None = None,
    project_root: Path | None = None,
) -> None:
    modes = default_section_modes(longitudinal)
    pavement = pavement_suggestions(longitudinal)
    paved_ranges = pavement_ranges(project_root) if project_root else []
    stored_by_chainage = {
        round(float(record["chainage_m"]), 3): (record.get("design") or {})
        for record in stored_designs
    }
    session_offsets: dict[float, float] = {}
    for raw_key, offset in (rock_boundary_offsets or {}).items():
        try:
            session_offsets[round(float(raw_key), 3)] = float(offset)
        except (TypeError, ValueError):
            continue
    for section in cross_sections:
        chainage = float(section.get("chainage_m", 0.0))
        key = round(chainage, 3)
        stored = stored_by_chainage.get(key) or {}
        suggested = pavement.get(key, False)
        try:
            design = compute_cross_design(
                section.get("samples", []),
                design_elevation_from_longitudinal(longitudinal, chainage),
                ground_type=str(stored.get("ground_type") or "ripping_rock"),
                section_mode=str(stored.get("section_mode") or modes.get(key, "left_cut")),
                ditch_side=stored.get("ditch_side"),
                ditch_type=str(stored.get("ditch_type") or "standard"),
                paved=paved_at(chainage, paved_ranges, stored.get("paved")),
                standard=standard,
                rock_boundary_offset_m=session_offsets.get(
                    key,
                    stored.get("rock_boundary_offset_m", STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M),
                ),
                two_stage_slope=bool(stored.get("two_stage_slope", True)),
                ditch_enabled=stored.get("ditch_enabled"),
            )
        except (ValueError, KeyError):
            continue
        design.update(status="provisional", pavement_suggested=suggested)
        if stored.get("display_half_width_m") is not None:
            design["display_half_width_m"] = stored["display_half_width_m"]
        if stored.get("inlet_structure") is not None:
            design["inlet_structure"] = stored["inlet_structure"]
        if stored.get("basin_adjust") is not None:
            design["basin_adjust"] = stored["basin_adjust"]
        if stored.get("ford_adjust") is not None:
            design["ford_adjust"] = stored["ford_adjust"]
        if stored.get("box_adjust") is not None:
            design["box_adjust"] = stored["box_adjust"]
        section["design"] = design


def compute_default_designs(
    project_root: Path,
    longitudinal_file_path: str,
    chainages: list[float],
    standard: dict[str, Any] | None = None,
) -> list[tuple[float, dict[str, Any]]]:
    """미지정 측점들을 기본값(리핑암 + 암반 경계 0.5m/상단측 절토)으로 계산한 목록을 만든다.

    standard가 오면(확정 요청의 패널 편집값) 그 값으로 표준단면 기하를 계산한다.
    계획고 부재 등으로 계산 불가한 측점은 조용히 건너뛴다(확정을 막지 않기 위함).
    """
    root = project_root.resolve()
    longitudinal_path = (root / longitudinal_file_path).resolve()
    if root not in longitudinal_path.parents or not longitudinal_path.is_file():
        return []
    longitudinal = json.loads(longitudinal_path.read_text(encoding="utf-8"))
    cross_dir = longitudinal_path.parent.parent / "cross_sections"
    default_modes = default_section_modes(longitudinal)
    pavement = pavement_suggestions(longitudinal)
    paved_ranges = pavement_ranges(root)
    results: list[tuple[float, dict[str, Any]]] = []
    for chainage_m in chainages:
        cross_path = cross_dir / cross_filename(chainage_m)
        if not cross_path.is_file():
            continue
        try:
            cross = json.loads(cross_path.read_text(encoding="utf-8"))
            samples = cross.get("samples")
            if not isinstance(samples, list):
                continue
            suggested = pavement.get(round(chainage_m, 3), False)
            design = compute_cross_design(
                samples,
                design_elevation_from_longitudinal(longitudinal, chainage_m),
                ground_type="ripping_rock",
                section_mode=default_modes.get(round(chainage_m, 3), "left_cut"),
                # 포장은 사용자 구간 지정만 켠다 — 경사 제안은 경고로만 남는다(2026-08-28).
                paved=paved_at(chainage_m, paved_ranges),
                standard=standard,
                rock_boundary_offset_m=STANDARD_ROCK_BOUNDARY_DEFAULT_OFFSET_M,
            )
            design["status"] = "provisional"
            design["pavement_suggested"] = suggested
            results.append((chainage_m, design))
        except (ValueError, KeyError, OSError, json.JSONDecodeError):
            continue
    return results