Aislo/resources/tester/test_m02_table_fill.py

"""M02 구조물 집계표 채우기 — 펼침 열 · 측점 줄 · 관 줄 나눔 · 손 값 지킴 (임시 프로젝트)."""

from __future__ import annotations

import json
from pathlib import Path
from typing import Any

import pytest

from config import config_system
from M02_MasterTemplete import M02_Table_Fill as fill

MASTER = config_system.PROJECT_ROOT / "resources/master_template/table/구조물집계표.json"


def _master() -> dict[str, Any]:
    return json.loads(MASTER.read_text(encoding="utf-8"))


@pytest.fixture
def project(tmp_path: Path) -> Path:
    root = tmp_path / "proj"
    route = root / "B05_Profile/route"
    route.mkdir(parents=True)
    structures = [
        {
            "type_id": "masonry_dry",
            "chainage_m": 85,
            "start_m": 80,
            "end_m": 90,
            "options": {"height_m": 2.0, "length_m": 10},
        },
        {
            "type_id": "masonry_wet",
            "chainage_m": 80,
            "start_m": 80,
            "end_m": 90,
            "options": {"height_m": 2.5, "length_m": 10},
        },
        {
            "type_id": "pavement_concrete",
            "chainage_m": 205,
            "start_m": 200,
            "end_m": 230,
            "options": {"length_m": 30, "width_m": 3, "thickness_cm": 20, "joint_spacing_m": 5},
        },
        {"type_id": "position_sign", "chainage_m": 300},
        {
            "type_id": "boulder_masonry",
            "chainage_m": 325,
            "start_m": 320,
            "end_m": 330,
            "options": {"height_m": 2.5, "length_m": 10, "bond": "메쌓기", "stone_cm": "40~60"},
        },
    ]
    for index, item in enumerate(structures):
        item.setdefault("structure_id", f"st{index}")
        item.setdefault("placement", "interval" if "start_m" in item else "point")
    (route / "structures.json").write_text(
        json.dumps({"revision": 1, "structures": structures}, ensure_ascii=False), encoding="utf-8"
    )
    edits = root / "B04_PreProcess/drainage/edits"
    edits.mkdir(parents=True)
    points = [
        {"chainage_m": 85.05, "source": "user", "options": {"pipe_diameter_mm": "1000"}},
        {"chainage_m": 85.05, "source": "user", "options": {"pipe_kind": "흄관"}},
        {"chainage_m": 173.09, "source": "user", "facility": "ford_bridge", "options": {}},
    ]
    (edits / "pipe_points.json").write_text(json.dumps({"points": points}), encoding="utf-8")
    return root


def _filled(project: Path, document: dict[str, Any] | None = None) -> dict[str, Any]:
    return fill.fill_table(project, document or _master(), {85.0: 14.0})


def _col(doc: dict[str, Any], col_id: str) -> dict[str, Any]:
    return next(column for column in doc["열"] if column["id"] == col_id)


def test_펼침_열은_설계에_쓰인_값만_차례대로(project: Path) -> None:
    doc = _filled(project)
    ids = [column["id"] for column in doc["열"]]
    assert [i for i in ids if i.startswith("ms|")] == ["ms|찰쌓기|2.5", "ms|메쌓기|2.0"]
    assert _col(doc, "ms|메쌓기|2.0")["머리"] == ["돌쌓기", "메쌓기", "H=2.0"]
    assert [i for i in ids if i.startswith("pp_len|")] == [
        "pp_len|흄관|1000",
        "pp_len|파형강관|1000",
    ]
    assert not any(i.startswith("rw|") for i in ids)  # 옹벽 없음 → 열 없음
    assert "rv" not in ids and "ps" in ids  # 펼침 마스터 칸은 빠지고 고정 열은 남음
    # 관 유입·유출 기슭막이는 레지스트리 기본값(찰 · 메 · 높이 없음)으로 열이 섬 · id 는 설계 값
    assert "rv|돌쌓기(찰)|-" in ids and "rv|돌쌓기(메)|-" in ids
    assert _col(doc, "rv|돌쌓기(찰)|-")["머리"] == ["돌기슭막이", "찰쌓기", "H=-"]
    assert not any(i.startswith("pg_in|") for i in ids)  # 날개벽·집수정 형식 없음 → 관보호공 없음


def test_계산_열_식은_같은_묶음_열로_바뀌고_빈_변수면_안_셈(project: Path) -> None:
    doc = _filled(project)
    assert _col(doc, "pv_a|20")["식"] == 'IF([pv_l|20]>0,[pv_b|20]*[pv_l|20]+[pv_w|20],"")'
    cp = _col(doc, "pp_cp|파형강관|1000")["식"]
    assert "[pp_len|파형강관|1000]" in cp and "[$파형강관_1본_m]" in cp
    assert "식" not in _col(doc, "pp_cp|흄관|1000")  # 흄관 1본 길이 빈칸 → 계산 안 함
    assert _col(doc, "bm_area|메쌓기|40~60|2.5")["식"] == (
        'IF([bm_len|메쌓기|40~60|2.5]>0,[bm_len|메쌓기|40~60|2.5]*2.5,"")'
    )


def test_측점_줄_같은_측점은_한_줄_관은_나눔(project: Path) -> None:
    doc = _filled(project)
    rows = {row["id"]: row for row in doc["줄"]}
    assert doc["줄"][0]["고정"] == "전구간"
    interval = rows["s80.00~90.00"]["값"]
    assert interval["sta"] == "NO.4~NO.4+10"
    assert interval["ms|찰쌓기|2.5"] == 10 and interval["ms|메쌓기|2.0"] == 10
    first, second = rows["s85.05"]["값"], rows["s85.05#1"]["값"]
    assert first["sta"] == second["sta"] == "NO.4+5.05"
    assert first["pp_len|파형강관|1000"] == 14.0 and "pp_len|흄관|1000" not in first
    assert second["pp_len|흄관|1000"] == 14.0  # 한 측점 횡단 관 연장은 하나 — 두 관이 같이 씀
    assert first["rv|돌쌓기(찰)|-"] == second["rv|돌쌓기(찰)|-"] == 10
    assert rows["s300.00"]["값"]["ps"] == 1
    assert [row["값"].get("no") for row in doc["줄"][1:]] == [str(i) for i in range(1, 8)]
    assert rows["s200.00~230.00"]["식"]["pv_jt|20"].count("/5)") == 1  # 줄눈 간격 5 박음
    assert doc["알림"] == []
    bare = fill.fill_table(project, _master(), {})
    assert bare["알림"] == ["관 연장 없음 2곳 — B06 횡단 설계 전이면 빈칸"]
    assert not any("pp_len" in key for row in bare["줄"] for key in row["값"])


def test_손_값과_전구간_줄은_다시_채워도_지킴(project: Path) -> None:
    doc = _filled(project)
    doc["줄"][0]["값"]["ps"] = 3
    next(row for row in doc["줄"] if row["id"] == "s300.00")["값"]["h_intake"] = 2
    doc["줄"].append({"id": "u1", "값": {"sta": "NO.9", "h_rockfall": 4}, "손": True})
    doc["줄"].append({"id": "s999.00", "값": {"sta": "NO.49+19", "h_waste": 1.5}})
    again = _filled(project, doc)
    rows = {row["id"]: row for row in again["줄"]}
    assert rows["all"]["값"]["ps"] == 3
    assert rows["s300.00"]["값"]["h_intake"] == 2
    assert rows["u1"]["값"]["h_rockfall"] == 4
    assert rows["s999.00"]["손"] is True and rows["s999.00"]["값"]["h_waste"] == 1.5
    assert [c["id"] for c in again["열"]] == [c["id"] for c in doc["열"]]  # 두 번 펼치지 않음


def test_측점_표기() -> None:
    assert fill.station_label(0) == "NO.0"
    assert fill.station_label(38) == "NO.1+18"
    assert fill.station_label(59.999) == "NO.3"
    assert fill.station_label(2413.5) == "NO.120+13.5"