Aislo/resources/tester/test_b07_frame_import_shapes.py

"""B07 도면 불러오기 — 호 · bulge 폴리선 · 거울 블록 · 겹 블록 견본 DXF(84-2) · 내보내기 시계방향 호(84-3).

견본은 ezdxf 로 그 자리에서 만들어 끌어다 놓기 길(`drawing_file_to_entities`)로 읽는다.
"""

from __future__ import annotations

import io
import math

import ezdxf
from ezdxf.enums import TextEntityAlignment

from B07_DesignDetail import B07_DesignDetail_Engine_Frame_Export as export
from B07_DesignDetail.B07_DesignDetail_Engine_Frame_Import import drawing_file_to_entities


def _read(doc: ezdxf.document.Drawing) -> list[dict]:
    stream = io.StringIO()
    doc.write(stream)
    entities, _layers = drawing_file_to_entities("견본.dxf", stream.getvalue().encode("utf-8"))
    return entities


def _points(polyline: dict) -> list[tuple[float, float]]:
    children = polyline["children"]
    points = [
        (c["shapeData"]["startPoint"]["x"], c["shapeData"]["startPoint"]["y"]) for c in children
    ]
    last = children[-1]["shapeData"]["endPoint"]
    return [*points, (last["x"], last["y"])]


def _on_circle(points, cx: float, cy: float, r: float) -> bool:
    return all(abs(math.hypot(x - cx, y - cy) - r) < 0.21 for x, y in points)


def test_호는_1사분면_작은_호():
    doc = ezdxf.new()
    doc.modelspace().add_arc((0, 0), 10, 0, 90)
    (arc,) = _read(doc)
    points = _points(arc)
    assert _on_circle(points, 0, 0, 10)
    assert points[0] == (10.0, 0.0) and math.isclose(points[-1][0], 0, abs_tol=1e-9)
    assert all(x >= -1e-9 and y >= -1e-9 for x, y in points)  # 큰 호(270°)로 뒤집히지 않음


def test_bulge_폴리선은_호로_펴짐():
    doc = ezdxf.new()
    space = doc.modelspace()
    # 반원(bulge 1 · 반시계 → 아래로) · 작은 호(bulge −0.2 · 시계 → 위로 1)
    space.add_lwpolyline([(0, 0, 0, 0, 1), (10, 0)], format="xyseb")
    space.add_lwpolyline([(0, 20, 0, 0, -0.2), (10, 20)], format="xyseb")
    half, small = _read(doc)
    half_points = _points(half)
    assert len(half_points) > 3 and _on_circle(half_points, 5, 0, 5)
    assert min(y for _x, y in half_points) < -4.9
    small_points = _points(small)
    assert len(small_points) > 3
    assert math.isclose(max(y for _x, y in small_points), 21.0, abs_tol=0.01)  # 처짐 = 0.2 × 10 / 2
    assert min(y for _x, y in small_points) >= 20 - 1e-9


def test_거울_블록은_WCS_자리():
    doc = ezdxf.new()
    block = doc.blocks.new("거울")
    block.add_lwpolyline([(0, 0, 0, 0, -0.2), (10, 0)], format="xyseb")
    block.add_arc((20, 0), 2, 0, 90)
    block.add_text("가", dxfattribs={"height": 2.5}).set_placement((2, 3))
    doc.modelspace().add_blockref("거울", (100, 0), dxfattribs={"xscale": -1})
    by_type: dict[str, list[dict]] = {}
    for entity in _read(doc):
        by_type.setdefault(entity["type"], []).append(entity)
    bulge, arc = by_type["PolyLine"]
    bulge_points = _points(bulge)
    assert (
        min(x for x, _y in bulge_points) >= 90 - 1e-9
        and max(x for x, _y in bulge_points) <= 100 + 1e-9
    )
    assert math.isclose(max(y for _x, y in bulge_points), 1.0, abs_tol=0.01)  # 위로 그대로
    arc_points = _points(arc)
    assert _on_circle(arc_points, 80, 0, 2)
    assert all(x <= 80 + 1e-9 and y >= -1e-9 for x, y in arc_points)  # 2사분면으로 대칭
    (text,) = by_type["Text"]
    assert text["shapeData"]["basePoint"] == {"x": 98.0, "y": 3.0}


def test_겹_블록도_풀림():
    doc = ezdxf.new()
    doc.blocks.new("속").add_line((0, 0), (1, 0))
    doc.blocks.new("겉").add_blockref("속", (5, 0))
    doc.modelspace().add_blockref("겉", (10, 0))
    (line,) = _read(doc)
    assert line["type"] == "Line"
    assert line["shapeData"] == {
        "startPoint": {"x": 15.0, "y": 0.0},
        "endPoint": {"x": 16.0, "y": 0.0},
    }


def test_TEXT_정렬점_자리():
    doc = ezdxf.new()
    space = doc.modelspace()
    space.add_text("가운데", dxfattribs={"height": 2}).set_placement(
        (50, 5), align=TextEntityAlignment.MIDDLE_CENTER
    )
    space.add_text("오른", dxfattribs={"height": 2}).set_placement(
        (80, 5), align=TextEntityAlignment.BOTTOM_RIGHT
    )
    center, right = _read(doc)
    assert center["shapeData"]["basePoint"] == {"x": 50.0, "y": 5.0}
    assert center["shapeData"]["options"]["textAlign"] == "center"
    assert right["shapeData"]["basePoint"] == {"x": 80.0, "y": 5.0}
    assert right["shapeData"]["options"]["textAlign"] == "right"


def test_내보내기_시계방향_작은_호(tmp_path):
    arc = {
        "type": "Arc",
        "layerId": "기본",
        "shapeData": {
            "center": {"x": 0, "y": 0},
            "radius": 1,
            "startAngle": math.pi / 2,
            "endAngle": 0,
            "counterClockwise": False,
        },
    }
    raw, skipped = export.drawing_to_dxf({"entities": [arc], "layers": []})
    assert skipped == {}
    path = tmp_path / "out.dxf"
    path.write_bytes(raw)
    (out,) = ezdxf.readfile(path).modelspace().query("ARC")
    span = (out.dxf.end_angle - out.dxf.start_angle) % 360
    assert math.isclose(span, 90) and math.isclose(out.dxf.start_angle % 360, 0, abs_tol=1e-9)


def test_작은_원_호는_뭉개지지_않음():
    """m 단위 도면(99-3 중력식사방댐) — 반지름 0.071 원 · 0.36 호 · bulge 0.4 폭 반원이 점 · 직선이 되지 않음."""
    doc = ezdxf.new()
    space = doc.modelspace()
    space.add_circle((0, 0), 0.071)
    space.add_arc((5, 0), 0.361, 10, 96)
    space.add_lwpolyline([(10, 0, 0, 0, 1), (10.4, 0)], format="xyseb")
    circle, arc, half = _read(doc)
    circle_points = _points(circle)
    assert len(circle_points) >= 33 and circle_points[0] == circle_points[-1]
    assert _on_circle(circle_points, 0, 0, 0.071)
    assert max(x for x, _y in circle_points) > 0.07 and min(x for x, _y in circle_points) < -0.07
    arc_points = _points(arc)
    assert len(arc_points) >= 9
    for x, y in arc_points:  # 10°~96° 안 · 큰 호로 뒤집히지 않음
        assert abs(math.hypot(x - 5, y) - 0.361) < 0.003
        assert 10 - 0.01 <= math.degrees(math.atan2(y, x - 5)) <= 96 + 0.01
    half_points = _points(half)
    assert len(half_points) >= 9 and min(y for _x, y in half_points) < -0.19