Aislo/resources/tester/test_323_4_attach_mirror.py

"""PLAN 323-4 형상 얹기 한 벌 — 파이썬 `attach_shapes` = TS `attachShapes`(거울) · 저장 전 그림 = 저장 뒤 그림.

- 42종 견본(관 지점 · 구조물 · 정의 기본값) + 빈칸 견본 → 측점마다 그림 자료(관 세트 · 벽 · 포장 · 맹암거) ·
  빈칸 경고 `blank`(「종류 칸」 · 측점 계획 자리)가 서버 = 화면.
- 옛 열쇠는 걷고 다시(물넘이포장을 옮기면 옛 자리 파임이 빠짐 · 걸친 측점에 새로).
- 3D — C군 벽은 덮는 측점 중 기준 측점에서만 시작 ~ 끝 스윕 · 지문 = 그림 자료 통째(손 해시가 빠뜨린 칸도).
TS 쪽 = `helper_323_4_attach.cjs`(Node).
"""

from __future__ import annotations

import copy
import json
import subprocess
import tempfile
from pathlib import Path

import pytest

from B05_Profile.B05_Profile_Structures_Schema import StructureInstance, load_definition
from B06_Section.B06_Section_Engine_Attach import attach_shapes
from common_util.common_util_drainage_pipes import parse_pipe_points
from common_util.common_util_structure_catalog import catalog
from M02_MasterTemplete.StructOptions.M02_SO_Options import with_visible

HERE = Path(__file__).parent
ROOT = HERE.parent.parent

pytestmark = pytest.mark.skipif(
    not (ROOT / "config" / "node_modules").is_dir(), reason="프론트엔드 의존성 미설치"
)

TYPES = with_visible().model_dump()["types"]


def _defaults(type_id: str) -> dict:
    """정의 기본값(빈 값 뺌) — 그림이 서는 견본."""
    options = next(t for t in TYPES if t["type_id"] == type_id)["options"]
    return {o["key"]: o["default"] for o in options if o["default"] not in (None, "")}


def _samples() -> tuple[list[dict], list[dict]]:
    """42종 하나씩(30 m 간격 · 구간형 = 기준 ± 5) + 빈칸 셋(관경 · 옹벽 높이 · 맹암거 높이)."""
    pipes: list[dict] = []
    structures: list[dict] = []
    rows = sorted(catalog().values(), key=lambda row: row["typeId"])
    for index, row in enumerate(rows):
        at = 15.0 + 30.0 * index
        options = _defaults(row["typeId"])
        if row["owner"] == "pipe_points":
            pipes.append({"chainage_m": at, "facility": row["typeId"], "options": options})
            continue
        span = {"start_m": at - 5, "end_m": at + 5} if row["placement"] == "interval" else {}
        structures.append(
            {
                "structure_id": f"s{index}",
                "type_id": row["typeId"],
                "placement": row["placement"],
                "chainage_m": at,
                "options": options,
                **span,
            }
        )
    end = 15.0 + 30.0 * len(rows)
    pipes.append({"chainage_m": end, "facility": "pipe", "options": {"pipe_diameter_mm": ""}})
    structures.append(
        {
            "structure_id": "blank-wall",
            "type_id": "retaining_wall",
            "placement": "interval",
            "start_m": end + 25,
            "chainage_m": end + 30,
            "end_m": end + 35,
            "options": {},
        }
    )
    structures.append(
        {
            "structure_id": "blank-drain",
            "type_id": "cross_underdrain",
            "placement": "point",
            "chainage_m": end + 60,
            "options": {},
        }
    )
    return pipes, structures


def _sections(until: float) -> list[dict]:
    """5 m 마다 측점(모든 기준 · 시작 · 끝 자리) — 옛 열쇠를 미리 얹어 걷힘도 봄."""
    out = []
    for step in range(int(until // 5) + 2):
        section = {"chainage_m": float(step * 5)}
        if step == 1:
            section["ford_pavement"] = {"type": "ford_pavement", "chainage_m": 5.0}  # 옛 자리
        out.append(section)
    return out


PIPES, STRUCTURES = _samples()
UNTIL = 15.0 + 30.0 * len(catalog()) + 60
CASES = {
    "all": {"sections": _sections(UNTIL), "pipes": PIPES, "structures": STRUCTURES},
    "empty": {"sections": _sections(30), "pipes": [], "structures": []},
}


@pytest.fixture(scope="module")
def ts() -> dict:
    payload = {"definition": load_definition(), "types": TYPES, "cases": CASES}
    with tempfile.TemporaryDirectory() as folder:
        path = Path(folder) / "input.json"
        path.write_text(json.dumps(payload, ensure_ascii=False), encoding="utf-8")
        out = subprocess.run(
            ["node", str(HERE / "helper_323_4_attach.cjs"), str(path)],
            capture_output=True,
            text=True,
            encoding="utf-8",
            timeout=120,
            check=True,
        )
    return json.loads(out.stdout)


def _py(case: dict) -> list[dict]:
    sections = copy.deepcopy(case["sections"])
    pipes = parse_pipe_points(case["pipes"])
    structures = [StructureInstance.model_validate(s) for s in case["structures"]]
    attach_shapes(sections, pipes, structures)
    return json.loads(json.dumps(sections))


def test_mirror_python_equals_ts(ts: dict) -> None:
    for name, case in CASES.items():
        py, js = _py(case), ts["cases"][name]
        assert len(py) == len(js), name
        for left, right in zip(py, js):
            assert left == right, (name, left["chainage_m"])


def test_every_shape_lands(ts: dict) -> None:
    keys = {key for section in ts["cases"]["all"] for key in section if key != "chainage_m"}
    assert {
        "culvert",
        "ford",
        "box",
        "ford_pavement",
        "revetment",
        "pavement",
        "underdrain",
    } <= keys
    old = ts["cases"]["all"][1]  # 옛 물넘이 자리(5 m) — 걷힘
    assert "ford_pavement" not in old
    assert all(len(section) == 1 for section in ts["cases"]["empty"])


def test_blank_chips(ts: dict) -> None:
    end = 15.0 + 30.0 * len(catalog())
    by_at = {s["chainage_m"]: s.get("blank") for s in ts["cases"]["all"]}
    assert by_at[end] == ["배관 관경"]
    assert by_at[end + 25] == by_at[end + 30] == by_at[end + 35] == ["옹벽 높이"]
    assert by_at[end + 60] == ["맹암거 암거 높이"]
    assert by_at[end + 5] is None  # 계획 자리만


def test_wall_sweeps_once(ts: dict) -> None:
    assert ts["sweep"] == [None, None, {"beforeM": 8, "afterM": 12}, None]


def test_fingerprint_covers_drawing(ts: dict) -> None:
    assert ts["fingerprint"] == {
        "same": True,
        "foundation": True,
        "pavement": True,
        "underdrain": True,
        "adjust": True,
        "plain": True,
    }