Aislo/resources/tester/test_280_3_route_undo_facilities.py

"""요구 280-3 — 노선 초안 중 ↶ · ↷ = 관 · 구조물 · 추가 측점도 그 걸음 사진(묶음 입력까지).

· 옛 흠 — ↶ 차례 follow 가 계획고 사진만 내고 시설은 안 내 묶음 측점이 마지막 끌기 누가거리에 남음
  (구조물 없는 구조물 측점 · 측점 없는 구조물) · 끌기 사이 손 옮김이 있으면 맞춤도 건너뛰어 오래 남음
· 잼 — ↶ · ↷ 첫 차례 · 조용해진 뒤 묶음 측점 시설 · 초안 상세 비정규 측점 = 측점 계획(가게 값) · 유령 0 · 빠짐 0
· 계획고 사진(356-4 ▲)은 그대로
짝: `helper_280_3_route_undo_facilities.cjs`(판 = 356-4 · 실제 TS 를 Node 로 · 화면 부품 · 서버 창구만 가짜).
"""

from __future__ import annotations

import json
import subprocess
import tempfile
from pathlib import Path

import pytest

import test_349_0q_undo_echo as base

HERE = Path(__file__).resolve().parent
MODES = ("structure", "pipe", "plus", "none")
PROJECT = base.ROOT / "storage/1/3/c725d747-50ae-46b0-87ce-4d4e56a53cf3"  # 검증_sub4(읽기만)
ROUTE = PROJECT / "B05_Profile/route"
SECTION = PROJECT / "B06_Section"
GRID = PROJECT / "B04_PreProcess/models/dtm_classification_smooth.npz"


def build_job() -> dict:
    """입력 한 벌 — 349-0q 꼴 · 검증_sub4 초기 노선 · 구조물 둘(점 · 구간)."""
    if not (GRID.is_file() and (SECTION / "longitudinal/longitudinal.json").is_file()):
        pytest.skip("검증_sub4 없음")
    curves = base._json(ROUTE / "planned_route_initial_curves.json")
    sections = sorted(
        (base._json(p) for p in (SECTION / "cross_sections").glob("cross_*.json")),
        key=lambda s: s["chainage_m"],
    )
    for i, section in enumerate(sections):
        section["design"] = {
            "ground_type": "soil",
            "design_elevation_m": section["center_z"],
            "cut_area_m2": 4.0 + (i % 5),
            "fill_area_m2": 1.5 + (i % 3),
        }
    pipes = [
        {"id": f"p{n}", "source": "manual", "facility": "pipe", **base._between(sections, n)}
        for n in (15, 20)
    ]
    point = base._between(sections, 25)
    a, b = base._between(sections, 30), base._between(sections, 31)
    return {
        "line": base._csv(ROUTE / "planned_route_initial.csv"),
        "nodes": base._csv(ROUTE / "planned_route_initial_nodes.csv"),
        "curves": [
            {k: c[k] for k in ("start", "apex", "end", "radius_m")} for c in curves["curves"]
        ],
        "stationSnap": bool(curves.get("station_snap")),
        "minRadius": curves["min_radius_m"],
        "interval": 20.0,
        "types": [
            {"type_id": t.type_id, "group": t.group, "placement": t.placement}
            for t in base.structure_type_map().values()
        ],
        "pipes": pipes,
        "standard": base.STANDARD_CROSS_SECTION,
        "conversion": base.ONES,
        "structures": [
            {
                "structure_id": "s-2803a",
                "type_id": "cross_underdrain",
                "placement": "point",
                **point,
            },
            {
                "structure_id": "s-2803b",
                "type_id": "retaining_wall",
                "placement": "interval",
                "start_m": a["chainage_m"],
                "chainage_m": round((a["chainage_m"] + b["chainage_m"]) / 2, 2),
                "end_m": b["chainage_m"],
                "x": (a["x"] + b["x"]) / 2,
                "y": (a["y"] + b["y"]) / 2,
            },
        ],
        "touched": {},
        "detail": {
            "longitudinal": base._json(SECTION / "longitudinal/longitudinal.json"),
            "cross_sections": sections,
        },
    }


def _run(job: dict, mode: str) -> dict:
    with tempfile.TemporaryDirectory() as folder:
        path = Path(folder) / "job.json"
        path.write_text(json.dumps(job), encoding="utf-8")
        grid = Path(folder) / "grid.bin"
        grid.write_bytes(base.dtm_grid_bytes(GRID))
        proc = subprocess.run(  # noqa: S603 — 고정 실행 파일
            [
                "node",
                str(HERE / "helper_280_3_route_undo_facilities.cjs"),
                str(path),
                str(grid),
                mode,
            ],
            capture_output=True,
            text=True,
            encoding="utf-8",
            timeout=300,
        )
    assert proc.returncode == 0, proc.stderr
    return json.loads(proc.stdout)


@pytest.fixture(scope="module")
def runs() -> dict:
    job = build_job()
    # 추가 측점 — 끌면 밀리는 뒤쪽 두 측점 사이
    sections = job["detail"]["cross_sections"]
    job["plusAt"] = (sections[-5]["chainage_m"] + sections[-4]["chainage_m"]) / 2
    return {mode: _run(job, mode) for mode in MODES}


def _clean(m: dict) -> None:
    assert m["ghost"] == [] and m["missing"] == [], m
    assert m["detailGhost"] in ([], None) and m["detailMissing"] in ([], None), m


@pytest.mark.parametrize("mode", MODES)
def test_되돌리기_다시하기_시설_측점_같음(runs, mode):
    r = runs[mode]
    assert r["moved"]["want"] != r["drag2"]["want"] or mode == "none"  # 끌기 2 가 시설을 옮김
    for key in ("undo", "redo"):
        _clean(r[key]["settled"])
        _clean(r[key]["first"])  # 맞춤 한 바퀴 전 첫 차례부터
        assert r[key]["settled"]["detailGhost"] is not None  # 노선 초안 그대로(초안 상세를 잼)
    assert r["undo"]["settled"]["want"] == r["moved"]["want"]  # ↶ = 끌기 2 전 시설 자리
    assert r["redo"]["settled"]["want"] == r["drag2"]["want"]
    assert r["blocked"] == 0


@pytest.mark.parametrize("mode", MODES)
def test_끌기_손옮김_사이_측점_같음(runs, mode):
    r = runs[mode]
    for key in ("open", "drag1", "lift", "moved", "drag2"):
        _clean(r[key])


def test_계획고_사진_그대로(runs):
    r = runs["structure"]
    assert r["undo"]["settled"]["offs"] == r["moved"]["offs"]  # ▲ 남음(356-4)
    assert r["redo"]["settled"]["offs"] == r["drag2"]["offs"]


@pytest.fixture(scope="module")
def frames() -> dict:
    proc = subprocess.run(  # noqa: S603 — 고정 실행 파일
        ["node", str(HERE / "helper_280_3_draft_frame.cjs")],
        capture_output=True,
        text=True,
        encoding="utf-8",
        timeout=120,
    )
    assert proc.returncode == 0, proc.stderr
    return json.loads(proc.stdout)


def test_옛_틀_상세는_저장분으로_맞춤(frames):
    r = frames["old_old"]  # 새로고침 첫 화면 · 묶음 갈아끼움 전
    assert r["hidden"] == [] and r["preview"] == []
    assert r["names"] == {"100": "맹암거", "153": "옹벽", "160": "옹벽", "167": "옹벽"}
    old = frames["old_null"]
    assert (
        old["hidden"] and "180" in old["names"]
    )  # 옛 동작 = 숨김 · 남의 자리 이름(시험이 흠을 잼)


def test_새_틀_상세는_저장분_종류와_안_견줌(frames):
    r = frames["new_new"]  # 묶음 갈아끼움 뒤
    assert r["hidden"] == [] and r["preview"] == []
    assert r["names"]["120"] == "맹암거"
    assert frames["new_null"]["preview"] == [120]  # 옛 동작 = 구조물 없는 사본