eomsangdonandClaude Opus 5.5
b8ed082874
- _apply_recommendations 지움(시설 BOX암거 · 세월교 바꿈 · 관경 넣기) · 새 관은 _apply_new_defaults 가 구조물정의 배관 기본(1000) - 응답 recommended_facility · recommended_diameter_mm 그대로(제안) - 시험 test_b05_drainage_recommend 고쳐 씀(추천 얹지 않음 · 옛 관 그대로 · 마스터 기본 1000) Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01XWh5wNNycMkbwMpACz1rte
115 lines
4.8 KiB
Python
115 lines
4.8 KiB
Python
"""배수 추천 구조물·관경 (PLAN 2026-08-17 「4」) — 제안만 · 자동 지정 없음(342-3 · 10-16 사용자 지시).
|
|
|
|
추천 근거는 **유량(유효직경)뿐**이다 — 계곡 횡단경사·하천 차수는 지형 계산이 필요해
|
|
이번 범위에서 뺐고 화면이 "현장 확인"으로 안내한다(사용자 확정).
|
|
|
|
D ≤ 1,500㎜ 배관 (레지스트리 선택지로 스냅, 하한 800㎜)
|
|
1,500 < D ≤ 2,000 BOX암거 후보
|
|
D > 2,000㎜ 세월교·물넘이 검토
|
|
"""
|
|
|
|
from pathlib import Path
|
|
from types import SimpleNamespace
|
|
|
|
import pytest
|
|
|
|
from B04_PreProcess import B04_PreProcess_Router_Basins as basins
|
|
from B05_Profile.B05_Profile_Structures_Schema import load_structure_types
|
|
from common_util.common_util_drainage_detail import (
|
|
DrainageDetail,
|
|
WatershedBasin,
|
|
recommend_structure,
|
|
)
|
|
from common_util.common_util_drainage_pipes import (
|
|
PIPE_FACILITY_BOX,
|
|
PIPE_FACILITY_FORD_BRIDGE,
|
|
PIPE_FACILITY_PIPE,
|
|
PIPE_SOURCE_STREAM,
|
|
PipePoint,
|
|
)
|
|
from common_util.common_util_route_geometry import StructureCandidate
|
|
from config.config_system import DRAINAGE_RECOMMEND_DIAMETERS_MM
|
|
|
|
|
|
# ── 추천 판정 ──────────────────────────────────────────────────────────────
|
|
|
|
|
|
@pytest.mark.parametrize(
|
|
"diameter_mm, expected",
|
|
[
|
|
(None, (PIPE_FACILITY_PIPE, None)), # 강우량표 없음 — 관경 미정
|
|
(300.0, (PIPE_FACILITY_PIPE, 800)), # 하한 800㎜ 아래로는 안 내린다
|
|
(800.0, (PIPE_FACILITY_PIPE, 800)),
|
|
(800.1, (PIPE_FACILITY_PIPE, 1000)), # 규격을 넘으면 바로 위 규격
|
|
(1000.0, (PIPE_FACILITY_PIPE, 1000)),
|
|
(1100.0, (PIPE_FACILITY_PIPE, 1200)),
|
|
(1500.0, (PIPE_FACILITY_PIPE, 1500)), # 경계값은 아직 배관
|
|
(1500.1, (PIPE_FACILITY_BOX, None)), # 초과 → BOX암거 후보
|
|
(2000.0, (PIPE_FACILITY_BOX, None)), # 경계값은 아직 BOX암거
|
|
(2000.1, (PIPE_FACILITY_FORD_BRIDGE, None)), # 관 최대 규격 초과
|
|
],
|
|
)
|
|
def test_recommend_structure_thresholds(diameter_mm, expected):
|
|
assert recommend_structure(diameter_mm) == expected
|
|
|
|
|
|
def test_recommended_sizes_match_registry_choices():
|
|
"""추천 관경은 폼에서 고를 수 있어야 한다 — 레지스트리 선택지와 같은 목록."""
|
|
by_id = {item.type_id: item for item in load_structure_types()}
|
|
options = {option.key: option for option in by_id["pipe"].options}
|
|
choices = [int(value) for value in options["pipe_diameter_mm"].choices]
|
|
assert list(DRAINAGE_RECOMMEND_DIAMETERS_MM) == choices
|
|
|
|
|
|
# ── 자동 지정 끔 — 제안은 응답에만 ─────────────────────────────────────────────
|
|
|
|
|
|
def _basin(chainage: float, facility: str, diameter: int | None) -> WatershedBasin:
|
|
return WatershedBasin(
|
|
index=1,
|
|
chainage_m=chainage,
|
|
outlet_x=0.0,
|
|
outlet_y=0.0,
|
|
recommended_facility=facility,
|
|
recommended_diameter_mm=diameter,
|
|
)
|
|
|
|
|
|
def _run_build(monkeypatch, basin: WatershedBasin, points: list[PipePoint] | None):
|
|
detail = DrainageDetail(
|
|
pipes=[StructureCandidate(chainage_m=100.0, x=0.0, y=0.0, reason=PIPE_SOURCE_STREAM)],
|
|
basins=[basin],
|
|
)
|
|
monkeypatch.setattr(basins, "build_detail", lambda *args: detail)
|
|
monkeypatch.setattr(basins, "drainage_dir", lambda path: Path("."))
|
|
_, carried = basins._build("x", SimpleNamespace(vertices=[]), points)
|
|
return carried
|
|
|
|
|
|
def _master_pipe_diameter():
|
|
pipe = {item.type_id: item for item in load_structure_types()}["pipe"]
|
|
return {option.key: option for option in pipe.options}["pipe_diameter_mm"].default
|
|
|
|
|
|
@pytest.mark.parametrize(
|
|
"facility, diameter",
|
|
[(PIPE_FACILITY_PIPE, 1500), (PIPE_FACILITY_BOX, None), (PIPE_FACILITY_FORD_BRIDGE, None)],
|
|
)
|
|
def test_new_pipe_gets_master_default_not_recommendation(monkeypatch, facility, diameter):
|
|
"""새로 놓인 관 = 배관 · 마스터 기본 관경 — 추천(관경 · BOX암거 · 세월교)은 안 얹는다."""
|
|
carried = _run_build(monkeypatch, _basin(100.0, facility, diameter), None)
|
|
assert carried[0].facility == PIPE_FACILITY_PIPE
|
|
assert carried[0].options["pipe_diameter_mm"] == _master_pipe_diameter()
|
|
|
|
|
|
def test_existing_auto_pipe_is_untouched(monkeypatch):
|
|
"""이미 놓인 자동 관의 빈 관경 · 시설은 추천으로 안 채운다(옛 값 그대로)."""
|
|
points = [PipePoint(chainage_m=100.0, source=PIPE_SOURCE_STREAM)]
|
|
carried = _run_build(monkeypatch, _basin(100.0, PIPE_FACILITY_BOX, None), points)
|
|
assert carried[0].facility == PIPE_FACILITY_PIPE
|
|
assert carried[0].options is None
|
|
|
|
|
|
def test_master_pipe_default_is_1000():
|
|
assert float(_master_pipe_diameter()) == 1000
|