feat(b07): 횡단 원지반 층 잠금 풂 · 측점 한 벌 groupId(180-1)

- 장 · 측점 한 장 원지반 층 잠금 지움(종단 그대로)
- 장의 측점마다 그림 · 표 · 글 groupId 하나 · cross_placements group_id
- 화면 덧그림(설계선 · 구조물)도 같은 groupId
- 새 시험 test_180_b07_cross_group

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01TNMXVCZXMpHpVvqmFkeChL

B07_DesignDetail/B07_DesignDetail_Engine_Cad.py

@@ -19,7 +19,7 @@ from uuid import UUID, uuid5
 
 from config.config_system import DRAWING_SCALE_CROSS
 
-# 레이어 정의 — 지표면선은 상세설계 제어 대상에서 제외하므로 잠금한다(N-1-3).
+# 레이어 정의 — 지표면선은 종단에서 잠금(N-1-3) · 횡단은 장에서 옮기므로 풂(180-1).
 GROUND_LAYER_ID = "b08-ground"
 GROUND_COLOR = "#f5f7fa"
 DESIGN_LAYER_ID = "b08-design"
@@ -622,7 +622,7 @@ def build_cross_drawing(
             }
         ],
         "layers": [
-            _layer(GROUND_LAYER_ID, "원지반", locked=True),
+            _layer(GROUND_LAYER_ID, "원지반"),
             _layer(DESIGN_LAYER_ID, "계획선"),
             _layer(STRUCTURE_LAYER_ID, "구조물"),
             _layer(ROCK_LAYER_ID, "암 경계선"),

B07_DesignDetail/B07_DesignDetail_Engine_Cad_Sheet.py

@@ -9,6 +9,7 @@
 
 import re
 from typing import Any
+from uuid import uuid5
 
 from B05_Profile.B05_Profile_Engine_Sections import cross_key
 from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
@@ -22,6 +23,7 @@ from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
     ROCK_LAYER_ID,
     STRUCTURE_LAYER_ID,
     TABLE_LINE_COLOR,
+    _ENTITY_NS,
     _clip_polyline,
     _layer,
     _section_window,
@@ -211,6 +213,12 @@ def build_cross_sheet(sheet: dict[str, Any], sections: list[dict[str, Any]]) ->
         left, _bottom, right, top = frames[0] if frames and frames[0] else cell
         if left < cell[0] - 1e-6 or right > cell[2] + 1e-6 or top > cell[3] + 1e-6:
             overflow.append(cell)
+        # 측점 한 벌 = groupId 하나 — 한 번 클릭에 그림 · 표 · 글 함께(180-1)
+        group_id = str(uuid5(_ENTITY_NS, f"{seed_id}:group"))
+        for entity in placed["entities"]:
+            entity["groupId"] = group_id
+        for placement in placed.get("cross_placements") or []:
+            placement["group_id"] = group_id
         entities.extend(placed["entities"])
         placements.extend(placed.get("cross_placements") or [])
 
@@ -233,7 +241,7 @@ def build_cross_sheet(sheet: dict[str, Any], sections: list[dict[str, Any]]) ->
         # 칸보다 큰 단면의 칸 [x0, y0, x1, y1] — 라우터가 CAD 가이드 붉은 틀로 보냄(169-2)
         "overflow_cells": overflow,
         "layers": [
-            _layer(GROUND_LAYER_ID, "원지반", locked=True),
+            _layer(GROUND_LAYER_ID, "원지반"),
             _layer(DESIGN_LAYER_ID, "계획선"),
             _layer(STRUCTURE_LAYER_ID, "구조물"),
             _layer(ROCK_LAYER_ID, "암 경계선"),

B07_DesignDetail/B07_DesignDetail_UI_Cad_Structures.ts

@@ -32,6 +32,8 @@ export interface CrossPlacement {
   x1: number;
   /** 블록 테두리(종이 mm) [x0, y0, x1, y1] — 그림을 이 안으로 자른다. */
   frame?: number[];
+  /** 측점 한 벌 묶음(180-1) — 덧그림도 같은 묶음으로 함께 골라짐. */
+  group_id?: string;
 }
 
 /** 측점과 도면 배치를 같은 자리로 볼 허용 오차(m). 정본이 누가거리를 0.01m로 끊어 쓴다. */
@@ -78,6 +80,7 @@ export async function appendStructureEntities(
       continue; // 한 측점의 기하 실패가 도면 전체를 막으면 안 된다.
     }
     if (!entities.length) continue;
+    if (placement.group_id) for (const entity of entities) entity.groupId = placement.group_id;
     // 이 블록 설계선은 우리가 다시 그렸다 — 서버가 낸 트림 전 설계선은 걷어낸다.
     replaced.push(frame);
     fresh.push(...entities);

resources/tester/test_180_b07_cross_group.py

@@ -0,0 +1,85 @@
+# -*- coding: utf-8 -*-
+"""180-1 B07 횡단 장 — 원지반선 고르기 · 측점 한 벌 groupId.
+
+못박는 것
+  - 횡단 장 · 측점 한 장의 원지반 층은 안 잠김(종단은 그대로 잠김).
+  - 측점마다 groupId 하나(원지반 · 계획선 · 표 · 글 전부) · 측점끼리 다름.
+  - 칸 격자선 · 도각엔 groupId 없음.
+  - cross_placements 의 group_id = 그 측점 엔티티 값(화면 덧그림이 같은 묶음).
+"""
+
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad import (
+    FRAME_LAYER_ID,
+    GROUND_LAYER_ID,
+    build_cross_drawing,
+)
+from B07_DesignDetail.B07_DesignDetail_Engine_Cad_Sheet import (
+    build_cross_sheet,
+    plan_cross_sheets,
+)
+from B07_DesignDetail.B07_DesignDetail_Engine_Template import use_project_templates
+
+
+def _source(chainage: float) -> dict:
+    return {
+        "chainage_m": chainage,
+        "samples": [
+            {"valid": True, "offset_m": float(x), "elevation_m": 100.0 + 0.1 * x}
+            for x in range(-5, 6)
+        ],
+    }
+
+
+def _design_line() -> list[dict]:
+    return [{"offset_m": x, "elevation_m": 100.0} for x in (-3.0, 0.0, 3.0)]
+
+
+def _drawing() -> dict:
+    use_project_templates(None)
+    chainages = [0.0, 20.0, 40.0, 60.0]
+    sheet = plan_cross_sheets(chainages, {"default": [2, 2]})[0]
+    sections = [
+        {
+            "chainage": c,
+            "source": _source(c),
+            "design_line": _design_line(),
+            "design": {"structure_note": "L형 측구"},
+            "quantity_table": {"ground": 1.0, "planned": 0.5},
+            "title": f"No.{int(c // 20)}",
+        }
+        for c in chainages
+    ]
+    return build_cross_sheet(sheet, sections)
+
+
+def _ground_locked(drawing: dict) -> bool:
+    return next(layer for layer in drawing["layers"] if layer["id"] == GROUND_LAYER_ID)["isLocked"]
+
+
+def test_원지반_층_안_잠김() -> None:
+    assert _ground_locked(_drawing()) is False
+    single = build_cross_drawing(_source(0.0), "cross_00000m", _design_line(), None, None, "")
+    assert _ground_locked(single) is False
+
+
+def test_측점마다_groupId_하나() -> None:
+    drawing = _drawing()
+    placements = drawing["cross_placements"]
+    assert len(placements) == 4
+    group_ids = [p["group_id"] for p in placements]
+    assert len(set(group_ids)) == 4  # 측점끼리 다름
+    grouped = [e for e in drawing["entities"] if "groupId" in e]
+    assert {e["groupId"] for e in grouped} == set(group_ids)
+    for group_id in group_ids:
+        members = [e for e in grouped if e["groupId"] == group_id]
+        layers = {e["layerId"] for e in members}
+        types = {e["type"] for e in members}
+        assert GROUND_LAYER_ID in layers and "Table" in types and "Text" in types
+    # 격자선 · 도각은 묶지 않음
+    assert all("groupId" not in e for e in drawing["entities"] if e["layerId"] == FRAME_LAYER_ID)
+    assert all(e["layerId"] != FRAME_LAYER_ID for e in grouped)
+
+
+def test_groupId_결정적() -> None:
+    first = [p["group_id"] for p in _drawing()["cross_placements"]]
+    assert first == [p["group_id"] for p in _drawing()["cross_placements"]]