feat(511-B B-2 서버 측점 생성 = 같은 TS): build_sections(B03 체인 · 노선 저장 · 재생성 · 넓힘 · 추천 초기 종단) = DTM 이면 늘 떠 있는 Node stations.sections(buildStations · sectionsGround · 측점 열쇠 key 더함 · 파이썬은 머리만) · DTM 아닌 지표면 · Node 못 돌림 = 파이썬 generate_sections · stations.list(측점 목록 · 열쇠) · /calc 창구는 stations.sections 안 받음(서버 경로 입력) · 등록부 R5 R6 R7 = node:stations.list · G4 = node:stations.sections · round6 = 십진 반올림(파이썬 round 꼴) · 추천 저장본 지문에 TS 더함 · 고정 자료 Node 길 = 파이썬 길 0 차(다섯 갈래) · golden 그대로 — 요구 320-4

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

A00_Common/design/logic/design_calc_node.ts

@@ -15,7 +15,8 @@
  *          stations: [{ samples · design_elevation_m · options: 파이썬 `compute_cross_design` 키 }] } ·
  *          berm?: { structures: 구조물 정본 목록 · chainages: [측점 m] } ·
  *          rebase? · carry?(노선 바뀐 [저장] · `design_calc_node_carry.ts`) ·
- *          stages?(묶음 단계 · `design_calc_node_stages.ts` · 511-B) } }
+ *          stages?(묶음 단계 · `design_calc_node_stages.ts` · 511-B) ·
+ *          stations?(측점 · `design_calc_node_sections.ts` · 511-B B-2) } }
  *   출력  { results: { [id]: 값 }, available: [id…] }
  *         — 차례는 요청 차례가 아니라 기댐 차례(누가토량 앞에 구조물 면적을 상세에 얹음 ·
  *           server-calc 묶음과 같은 차례).
@@ -43,12 +44,13 @@ import {
 } from "../../../B06_Section/B06_Section_Structure_Layouts";
 import { carryRunners, type CarryInputs } from "./design_calc_node_carry";
 import { followRunners, type FollowInputs } from "./design_calc_node_follow";
+import { sectionsRunners, type SectionsInputs } from "./design_calc_node_sections";
 import { STAGE_IDS, stageRunners, type StagesInputs } from "./design_calc_node_stages";
 import { TRIAL_IDS, trialRunners, type TrialInputs } from "./design_calc_node_trial";
 
 type HaulOptions = NonNullable<Parameters<typeof computeHaulPlan>[2]>;
 
-interface CalcInputs extends FollowInputs, CarryInputs, TrialInputs, StagesInputs {
+interface CalcInputs extends FollowInputs, CarryInputs, TrialInputs, StagesInputs, SectionsInputs {
   detail?: SectionDetailResponse;
   route_points?: RoutePoint[];
   context?: Partial<
@@ -148,6 +150,7 @@ async function runDesignCalc(run: readonly string[], inputs: CalcInputs) {
     ...carryRunners(inputs), // 노선 바뀐 [저장] 다시 얹기 — 관 · 구조물 초안 · 횡단 고침(472-6 6-B)
     ...trialRunners(inputs), // 계산 자리 「서버」 시험 길(511-A)
     ...stageRunners(inputs), // 묶음 단계 노선 ~ 횡단(511-B B-1)
+    ...sectionsRunners(inputs), // 측점 목록 · 서버 측점 생성(511-B B-2)
     // 구조물 측점 면적 · 관 길이를 상세에 얹음(자리에서) — 뒤 누가토량이 고친 면적 위에서 쌓임.
     "structure.layouts": () => {
       const areas = structureAreaRows(sections);

A00_Common/design/logic/design_calc_node_sections.ts

@@ -0,0 +1,79 @@
+/* =============================================================================
+ * A00_Common/design/logic/design_calc_node_sections.ts
+ * 계산 Node 입구(`design_calc_node.ts`)의 측점 몫(PLAN 511-B B-2) — 화면 묶음 stations 단계와 같은 TS.
+ *
+ *   stations.list      입력 stations { line · curves · pipes · structures · types · definition? · plus ·
+ *                      interval_m · include_endpoint? · station_snap · station_snap_step } →
+ *                      측점 목록(`buildStations` · 열쇠 · 종류 · 반경 · 확폭 · 지반 null) — 계산 자리 「서버」 ·
+ *                      노선 저장 옛 노선 열쇠
+ *   stations.sections  같은 입력 + grid(DTM 격자 이진 경로) · 표본 간격 → 서버 `generate_sections` 꼴
+ *                      (`generateSections`) — 서버 측점 생성 길만(창구 `/calc` 는 막음 · 경로 입력)
+ * definition = 구조물 정의(`{types, …정의}` · 화면 `fetchStructureTypes` 와 같은 꼴) — 심는 측점 · 카드 이름 표.
+ * ========================================================================== */
+
+import { useCatalogDefinition, type CatalogDefinition } from "@util/common_util_structure_catalog";
+import type { PlanPipe, PlanStructure, PlanType } from "@util/common_util_structure_station";
+import { buildStations } from "../../../B05_Profile/logic/B05_Profile_Sections_Stations";
+import { generateSections } from "../../../B05_Profile/logic/B05_Profile_Sections_Generate";
+import type { DesignCurve, Vertex } from "./design_pipeline_types";
+import { gridAt } from "./design_calc_node_stages";
+
+export interface SectionsInputs {
+  stations?: {
+    line: Vertex[];
+    curves?: DesignCurve[];
+    pipes?: PlanPipe[];
+    structures?: PlanStructure[];
+    types: PlanType[];
+    definition?: CatalogDefinition | null;
+    plus?: number[];
+    interval_m?: number;
+    include_endpoint?: boolean;
+    station_snap?: boolean;
+    station_snap_step?: number | null;
+    grid?: string;
+    cross_half_width_m?: number;
+    cross_sample_interval_m?: number;
+    long_sample_interval_m?: number;
+  };
+}
+
+/** id → 셈(입구 `RUNNERS` 에 얹음). */
+export function sectionsRunners(inputs: SectionsInputs): Record<string, () => unknown> {
+  const args = () => {
+    const at = inputs.stations;
+    if (!at) throw new Error("측점 입력(stations) 없음");
+    if (at.definition !== undefined) useCatalogDefinition(at.definition);
+    const options = {
+      intervalM: at.interval_m,
+      includeEndpoint: at.include_endpoint,
+      stationSnap: at.station_snap ?? false,
+      stationSnapStep: at.station_snap_step ?? null,
+      types: at.types,
+      plus: at.plus ?? [],
+      crossHalfWidthM: at.cross_half_width_m,
+      crossSampleIntervalM: at.cross_sample_interval_m,
+      longSampleIntervalM: at.long_sample_interval_m,
+    };
+    return { at, options };
+  };
+  return {
+    "stations.list": () => {
+      const { at, options } = args();
+      return buildStations(at.line, at.curves ?? [], at.pipes ?? [], at.structures ?? [], options);
+    },
+    "stations.sections": () => {
+      const { at, options } = args();
+      if (!at.grid) throw new Error("DTM 격자 없음 — DTM 아닌 지표면은 파이썬 길");
+      const grid = gridAt(at.grid);
+      return generateSections(
+        at.line,
+        at.curves ?? [],
+        at.pipes ?? [],
+        at.structures ?? [],
+        grid,
+        options,
+      );
+    },
+  };
+}

A00_Common/design/logic/design_calc_node_stages.ts

@@ -77,7 +77,7 @@ export const STAGE_IDS = STAGE_NAMES.map((name) => `stage.${name}`);
 let gridMemo: { path: string; mtime: number; grid: DtmGrid } | null = null;
 
 /** DTM 격자 이진 — 같은 경로 · 같은 수정 시각이면 앞에 읽은 것(늘 떠 있는 Node). */
-function gridAt(path: string): DtmGrid {
+export function gridAt(path: string): DtmGrid {
   const mtime = statSync(path).mtimeMs;
   if (gridMemo?.path !== path || gridMemo.mtime !== mtime) {
     const bytes = readFileSync(path);

A00_Common/design/logic/design_calc_registry.ts

@@ -121,10 +121,14 @@ export const CALC_REGISTRY: readonly CalcEntry[] = [
     site: "browser_now",
     stage: "stations",
     ts: `${B05L}B05_Profile_UI_RouteEdit_Frame.ts#stationFrameAt`,
-    runner: `py:${B05}B05_Profile_Engine_Sections_Core.py#generate_sections`,
-    until: "472-4",
+    runner: "node:stations.list",
     pair: `${B05}B05_Profile_Engine_Sections_Core.py#generate_sections`,
-    mirror: ["test_b05_routeedit_frame_mirror", "test_224_2_station_snap"],
+    mirror: [
+      "test_b05_routeedit_frame_mirror",
+      "test_224_2_station_snap",
+      "test_511_b2_stations_node",
+    ],
+    note: "서버 측점 생성 = Node `stations.sections`(DTM) · 파이썬 짝 = DTM 아닌 지표면 · 추천 엔진 · B06 측점 맞춤",
   },
   {
     id: "stations.list",
@@ -143,11 +147,14 @@ export const CALC_REGISTRY: readonly CalcEntry[] = [
     site: "browser_now",
     stage: "stations",
     ts: `${B05L}B05_Profile_Sections_Stations.ts#buildStations`,
-    runner: `py:${B05}B05_Profile_Engine_Sections_Core.py#generate_sections`,
-    until: "472-4",
+    runner: "node:stations.list",
     pair: `${B05}B05_Profile_Engine_Sections_Core.py#generate_sections`,
-    mirror: ["test_344_3_pipeline_stations_mirror", "test_407_curve_station"],
-    note: "파이썬 짝은 B03 체인 · B07 IP 표 · 추천도 부름",
+    mirror: [
+      "test_344_3_pipeline_stations_mirror",
+      "test_407_curve_station",
+      "test_511_b2_stations_node",
+    ],
+    note: "서버 측점 생성 길(B03 체인 · 노선 저장 · 재생성 · 추천 초기 종단) = Node `stations.sections`(DTM) · 파이썬 짝 = DTM 아닌 지표면 · B07 IP 표 · 추천 엔진",
   },
   {
     id: "stations.key",
@@ -158,11 +165,10 @@ export const CALC_REGISTRY: readonly CalcEntry[] = [
     site: "browser_now",
     stage: "stations",
     ts: `${U}common_util_station_key.ts#stationKey`,
-    runner: `py:${U}common_util_station_key.py#station_key`,
-    until: "472-4",
+    runner: "node:stations.list",
     pair: `${U}common_util_station_key.py#station_key`,
-    mirror: ["test_344_3_station_key_mirror"],
-    note: "서버 열쇠(Route_Save_Parts.station_keys)는 주인 = 파이썬 plan_stations(F3 · 카탈로그) · 부르는 곳 = 노선 저장 이월(③) — ③ · F3 와 같이 Node 로",
+    mirror: ["test_344_3_station_key_mirror", "test_511_b2_stations_node"],
+    note: "노선 저장 이월 열쇠 = Node 측점 출력(`key` · 옛 노선 = `stations.list`) · 파이썬 짝 = 옛 열쇠 꼴 읽기(at: · 누가거리)",
   },
   {
     id: "stations.swap",
@@ -245,10 +251,10 @@ export const CALC_REGISTRY: readonly CalcEntry[] = [
     site: "browser_now",
     stage: "cross",
     ts: `${B05L}B05_Profile_Pipeline_Detail.ts#uphillSide`,
-    runner: `py:${B05}B05_Profile_Engine_Sections_Core.py#generate_sections`,
-    until: "472-4",
+    runner: "node:stations.sections",
     pair: `${B05}B05_Profile_Engine_Sections_Core.py#generate_sections`,
-    mirror: ["test_346_2_pipeline_cross_page"],
+    mirror: ["test_346_2_pipeline_cross_page", "test_511_b2_stations_node"],
+    note: "서버 측점 생성(DTM) = Node `stations.sections` 의 상단측 · DTM 아닌 지표면 = 파이썬 짝",
   },
   /* ── 종단 ─────────────────────────────────────────────────────────────── */
   {

B05_Profile/B05_Profile_Engine_InitialProfile.py

@@ -40,6 +40,13 @@ SOURCE_GLOBS = (
     "common_util/common_util_structure_station.py",
     "common_util/common_util_drainage_pipes.py",
     "config/config_system_design.py",
+    # 측점 · 지반 = Node `stations.sections`(511-B B-2) — 묶음을 낳는 TS
+    "B05_Profile/logic/B05_Profile_Sections_*.ts",
+    "B05_Profile/logic/B05_Profile_UI_RouteEdit_Frame.ts",
+    "common_util/common_util_structure_station.ts",
+    "common_util/common_util_structure_catalog.ts",
+    "common_util/common_util_surface_sampler.ts",
+    "A00_Common/design/logic/design_calc_node_sections.ts",
 )
 # 직선 위 꼭짓점(438 직선화) 판정 — 앞뒤 기울기 차(비율)
 _STRAIGHT_EPS = 1e-5
@@ -126,12 +133,19 @@ def initial_longitudinal(
 ) -> dict[str, Any]:
     """[적용] 체인이 남길 종단(측점 · 계획선) — 측점 생성 · 균형 얹기와 같은 조각."""
     from B05_Profile.B05_Profile_Engine_Grade_Profile import rebuild_alignment_profile
-    from B05_Profile.B05_Profile_Engine_Sections import build_sections, resolve_extra_stations
+    from B05_Profile.B05_Profile_Engine_Sections import (
+        build_sections,
+        resolve_extra_stations,
+        station_facilities,
+    )
     from B05_Profile.B05_Profile_Router_RouteInitial import seat_base_pvi
 
     polyline = [[x, y, 0.0] for x, y in line]
     pipes, structures, plus = facilities
-    extras = resolve_extra_stations(project_root, pipes, polyline, structures=structures, plus=plus)
+    planted = station_facilities(project_root, pipes, polyline, structures=structures, plus=plus)
+    extras = resolve_extra_stations(
+        project_root, planted[0], structures=planted[1], plus=planted[2]
+    )
     result, _summary = build_sections(
         polyline,
         sampler,
@@ -144,6 +158,7 @@ def initial_longitudinal(
         design_curves=curves,
         station_snap=True,  # [적용] = 스냅 켬 · 측점 No.(`saveRecommendedRoute`)
         station_snap_step=None,
+        facilities=planted,
     )
     longitudinal = result["longitudinal"]
     if target is not None and longitudinal.get("profile_alignment"):

B05_Profile/B05_Profile_Engine_Sections.py

@@ -34,6 +34,7 @@ from B05_Profile.B05_Profile_Engine_Sections_Names import (  # noqa: F401 —
     prune_stale_cross_files,
     valid_cross_names,
 )
+from B05_Profile.B05_Profile_Engine_Sections_Node import node_sections
 from B05_Profile.B05_Profile_Structures_Repository import load_structures
 from B05_Profile.B05_Profile_Structures_Schema import (
     structure_type_map,
@@ -257,6 +258,24 @@ def resolve_extra_stations(
     `xy` = 지금 노선 — 노선 밖(시점 앞 · 종점 뒤 · `route_outside`) 관 · 구조물은 뺌(459).
     `structures` · `plus` = 파일 대신 따라간 사본(476 추천 초기 종단 · 파일 안 씀).
     """
+    return tuple(
+        (float(station["chainage_m"]), str(station["title"]))
+        for station in plan_stations(
+            *station_facilities(project_root, pipes, xy, structures=structures, plus=plus)
+        )
+    )
+
+
+def station_facilities(
+    project_root: Path,
+    pipes: list[PipePoint],
+    xy: Sequence[Sequence[float]] | None = None,
+    *,
+    structures: list[Any] | None = None,
+    plus: list[float] | None = None,
+) -> tuple[list[PipePoint], list[Any], list[float]]:
+    """측점을 심는 관 · 구조물 · 추가 측점(노선 밖 뺌) — 파이썬 `plan_stations` ·
+    Node 측점 생성이 같은 입력."""
     from B05_Profile.B05_Profile_Plus_Stations import plus_chainages
     from common_util.common_util_route_follow import route_outside
 
@@ -273,12 +292,7 @@ def resolve_extra_stations(
             for s in structures
             if not route_outside(getattr(s, "x", None), getattr(s, "y", None), xy)
         ]
-    return tuple(
-        (float(station["chainage_m"]), str(station["title"]))
-        for station in plan_stations(
-            pipes, structures, plus_chainages(project_root) if plus is None else plus
-        )
-    )
+    return pipes, structures, plus_chainages(project_root) if plus is None else list(plus)
 
 
 def _append_design_profiles(
@@ -408,21 +422,28 @@ def build_sections(
     design_curves: list[dict[str, Any]],
     station_snap: bool,
     station_snap_step: float | None,
+    facilities: tuple[list[Any], list[Any], list[float]] | None = None,
 ) -> tuple[dict[str, Any], dict[str, Any] | None]:
     """측점 틀 · 지반 · 1차 계획선(438) · 포장 제안 — 파일 안 씀 · (결과, 계획선 요약).
 
     종횡단 생성(`run_section_generation`)과 추천 후보 초기 종단(476 · `..._RouteInitial_Initial`)
-    이 같은 셈 한 벌."""
-    result = generate_sections(
-        polyline,
-        sampler,
-        replace(options or SectionGenerationOptions(), extra_stations=extras),
-        source_snapshot=source_snapshot,
-        crs=crs,
-        design_curves=design_curves,
-        station_snap=station_snap,
-        station_snap_step=station_snap_step,
-    )
+    이 같은 셈 한 벌. 측점 · 지반 = 화면과 같은 TS(Node `stations.sections` · 511-B B-2 ·
+    `facilities` = `station_facilities`) · DTM 아닌 지표면 · Node 못 돌림 =
+    파이썬 `generate_sections`."""
+    generation = replace(options or SectionGenerationOptions(), extra_stations=extras)
+    shared = {
+        "crs": crs,
+        "design_curves": design_curves,
+        "station_snap": station_snap,
+        "station_snap_step": station_snap_step,
+    }
+    result = (
+        node_sections(
+            polyline, sampler, facilities, generation, source_snapshot=source_snapshot, **shared
+        )
+        if facilities is not None
+        else None
+    ) or generate_sections(polyline, sampler, generation, source_snapshot=source_snapshot, **shared)
     grade_summary = _append_design_profiles(
         result["longitudinal"],
         grade_options,
@@ -475,10 +496,13 @@ def run_section_generation(
     # 값이라, 되먹이면 B04에서 지운 관이 파일 정본을 이기고 되살아난다.
     pipes = _load_pipe_points(project_root, polyline)
     try:
-        extras = resolve_extra_stations(project_root, pipes, polyline)
+        facilities = station_facilities(project_root, pipes, polyline)
+        extras = resolve_extra_stations(
+            project_root, facilities[0], structures=facilities[1], plus=facilities[2]
+        )
     except Exception:
         logger.exception("B05 구조물 측점 해석 실패 (규칙 격자만 생성)")
-        extras = ()
+        facilities, extras = ([], [], []), ()
     logger.info("B05 종횡단: 구조물 측점 %d건 파생(관 %d건)", len(extras), len(pipes))
 
     result, grade_summary = build_sections(
@@ -495,6 +519,7 @@ def run_section_generation(
         design_curves=_load_design_curves(project_root),
         station_snap=load_station_snap(project_root),
         station_snap_step=load_station_snap_step(project_root),
+        facilities=facilities,
     )
 
     stage_root = project_root / _STAGE_SUBDIR

B05_Profile/B05_Profile_Engine_Sections_Core.py

@@ -16,6 +16,9 @@
 (`buildStations`). 거울 시험 `resources/tester/test_344_3_pipeline_stations_mirror.py`.
 ⚠ 파이썬·TS 짝 — `generate_sections` 상단측(`uphill_side`) ↔ `B05_Profile/logic/B05_Profile_Pipeline_Detail.ts`
 (`uphillSide`). 거울 시험 `resources/tester/test_346_2_pipeline_cross_page.py`.
+서버 측점 생성 길(`build_sections`)은 DTM 이면 같은 TS(Node `stations.sections` · 511-B B-2 ·
+`B05_Profile_Engine_Sections_Node.py`) — 이 짝을 쓰는 곳 = DTM 아닌 지표면 · Node 못 돌림 ·
+구조물 측점만 뜨기(`sample_structure_sections`) · B06 곡선 측점 판정 · 추천 엔진(`_plan_radii` 등).
 """
 
 import math

B05_Profile/B05_Profile_Engine_Sections_Node.py

@@ -0,0 +1,157 @@
+"""서버 측점 생성 = 화면과 같은 TS(PLAN 511-B B-2 · 요구 320-4) — 늘 떠 있는 Node
+`stations.sections`.
+
+`build_sections`(B03 체인 · 노선 저장 · 재생성 · 넓힘 · 추천 초기 종단)가 부름 — 측점 자리 ·
+종류 · 열쇠 · 반경 · 확폭 · 지반 · 틀 · 상단측 =
+`B05_Profile/logic/B05_Profile_Sections_Generate.ts`
+(화면 묶음 stations · ground 단계와 같은 함수). 파이썬은 머리(schema_version · source ·
+coordinate_reference · cad_exchange · options)만 붙임.
+
+DTM 지표면만(격자 이진 = `dtm_grid_file`) — DTM 아닌 지표면(tin · nurbs · implicit · meshfree) ·
+Node 못 돌림 = None → 부르는 쪽이 파이썬 `generate_sections`(짝 · 로그 남김).
+측점 열쇠(`key`) = 노선 저장 이월 열쇠(`B05_Profile_Route_Save._carry_cross`).
+"""
+
+from __future__ import annotations
+
+import logging
+from typing import Any
+
+from B05_Profile.B05_Profile_Engine_Sections_Core import (
+    SECTION_SCHEMA_VERSION,
+    SectionGenerationOptions,
+)
+
+logger = logging.getLogger(__name__)
+
+
+def plan_pipe(pipe: Any) -> dict[str, Any]:
+    """관 정본 → TS `PlanPipe`(누가거리 그대로 · 파이썬 `plan_stations` 가 읽는 칸)."""
+    return {
+        "id": getattr(pipe, "id", None),
+        "chainage_m": float(pipe.chainage_m),
+        "facility": getattr(pipe, "facility", None) or "pipe",
+        "start_m": getattr(pipe, "start_m", None),
+        "end_m": getattr(pipe, "end_m", None),
+        "options": getattr(pipe, "options", None) or {},
+    }
+
+
+def structure_table() -> tuple[list[dict[str, Any]], dict[str, Any]]:
+    """구조물 종류(`/projects/structure-types` 꼴) · 정의(화면 `useCatalogDefinition` 꼴)."""
+    from B05_Profile.B05_Profile_Structures_Schema import _read_definition, _stamp
+    from M02_MasterTemplete.StructOptions.M02_SO_Options import with_visible
+
+    types = [item.model_dump(mode="json") for item in with_visible().types]
+    return types, {"types": types, **_read_definition(*_stamp())}
+
+
+def stations_input(
+    xy: list[list[float]],
+    pipes: list[Any],
+    structures: list[Any],
+    plus: list[float],
+    options: SectionGenerationOptions,
+    design_curves: list[dict[str, Any]],
+    station_snap: bool,
+    station_snap_step: float | None,
+) -> dict[str, Any]:
+    """Node `stations.list` · `stations.sections` 입력(격자 빼고)."""
+    types, definition = structure_table()
+    return {
+        "line": xy,
+        "curves": design_curves,
+        "pipes": [plan_pipe(pipe) for pipe in pipes],
+        "structures": [
+            item.model_dump(mode="json") if hasattr(item, "model_dump") else dict(item)
+            for item in structures
+        ],
+        "types": types,
+        "definition": definition,
+        "plus": [float(at) for at in plus],
+        "interval_m": options.station_interval_m,
+        "include_endpoint": options.include_endpoint,
+        "station_snap": station_snap,
+        "station_snap_step": station_snap_step,
+        "cross_half_width_m": options.cross_half_width_m,
+        "cross_sample_interval_m": options.cross_sample_interval_m,
+        "long_sample_interval_m": options.long_sample_interval_m,
+    }
+
+
+def node_stations(stations: dict[str, Any]) -> list[dict[str, Any]] | None:
+    """측점 목록(`buildStations` · 열쇠 · 누가거리 · 종류) — 못 돌림 None."""
+    from common_util.common_util_calc_runner import run_calc_served
+
+    answer = run_calc_served(["stations.list"], {"stations": stations})
+    if not answer or "error" in answer:
+        logger.warning("Node 측점 목록 실패: %s", (answer or {}).get("error"))
+        return None
+    return answer["results"]["stations.list"]
+
+
+def node_sections(
+    polyline: list[list[float]],
+    sampler: Any,
+    facilities: tuple[list[Any], list[Any], list[float]],
+    options: SectionGenerationOptions,
+    *,
+    source_snapshot: dict[str, Any],
+    crs: str | None,
+    design_curves: list[dict[str, Any]],
+    station_snap: bool,
+    station_snap_step: float | None,
+) -> dict[str, Any] | None:
+    """`generate_sections` 와 같은 꼴(+ 측점 `key`) — DTM 아님 · Node 못 돌림 = None."""
+    from common_util.common_util_calc_runner import run_calc_served
+    from common_util.common_util_surface_sampler import dtm_grid_file
+
+    source = getattr(sampler, "source", None)
+    if not source:
+        return None
+    options.validate()
+    pipes, structures, plus = facilities
+    stations = stations_input(
+        [[float(p[0]), float(p[1])] for p in polyline],
+        pipes,
+        structures,
+        plus,
+        options,
+        design_curves,
+        station_snap,
+        station_snap_step,
+    )
+    stations["grid"] = str(dtm_grid_file(source))
+    answer = run_calc_served(["stations.sections"], {"stations": stations})
+    if not answer or "error" in answer:
+        logger.warning("Node 측점 생성 실패 — 파이썬 길: %s", (answer or {}).get("error"))
+        return None
+    out = answer["results"]["stations.sections"]
+    return {
+        "schema_version": SECTION_SCHEMA_VERSION,
+        "status": "completed",
+        "source": source_snapshot or {},
+        "coordinate_reference": {
+            "crs": crs,
+            "world_axes": {"x": "project_easting", "y": "project_northing", "z": "elevation"},
+            "units": {"horizontal": "m", "vertical": "m", "angle": "degree"},
+        },
+        "cad_exchange": {
+            "station_origin": "BP",
+            "chainage_direction": "BP_to_EP",
+            "cross_offset_sign": {"negative": "right", "positive": "left"},
+            "cross_local_axes": {"x": "offset_m", "y": "elevation_m"},
+            "recommended_drawing_datum_m": out["datum"],
+        },
+        "options": {
+            "station_interval_m": options.station_interval_m,
+            "cross_half_width_m": options.cross_half_width_m,
+            "cross_sample_interval_m": options.cross_sample_interval_m,
+            "long_sample_interval_m": options.long_sample_interval_m,
+            "include_endpoint": options.include_endpoint,
+            "extra_stations": [list(entry) for entry in options.extra_stations],
+        },
+        "longitudinal": out["longitudinal"],
+        "cross_sections": out["cross_sections"],
+        "summary": out["summary"],
+    }

B05_Profile/logic/B05_Profile_Sections_Generate.ts

@@ -0,0 +1,107 @@
+/* =============================================================================
+ * B05_Profile/logic/B05_Profile_Sections_Generate.ts
+ * 측점 생성 한 벌(PLAN 511-B B-2) — 노선 + 관 · 구조물 · 추가 측점 + DTM 격자 → 서버 `generate_sections`
+ * 꼴(종단 표본 · 측점 · 횡단 표본). 서버 측점 생성 길(`B05_Profile_Engine_Sections_Node.py` → Node
+ * `stations.sections`)이 부름 — 화면 묶음과 같은 측점(`buildStations`) · 같은 지반(`sectionsGround`).
+ *
+ * 측점 = `buildStations`(열쇠 · 종류 · 반경 · 확폭) · 지반 · 틀 · 상단측 = `sectionsGround` · 이름 =
+ *   `plantedStations`(카드 이름) · 칸 차례 · 자릿수 = 파이썬 `generate_sections` 그대로 + 측점 열쇠 `key`.
+ * 머리(schema_version · source · coordinate_reference · cad_exchange · options)는 파이썬이 붙임.
+ * 순수 — 화면 · fetch · 세션 없음.
+ * ========================================================================== */
+
+import type { DtmGrid } from "../../common_util/common_util_surface_sampler";
+import { stationsAlong } from "./B05_Profile_UI_RouteEdit_Frame";
+import { formatStation } from "../../B06_Section/logic/B06_Section_Station_Swap";
+import { stationIdOf } from "./B05_Profile_Pipeline_Grade";
+import {
+  buildStations,
+  lineLength,
+  plantedStations,
+  SECTION_INCLUDE_ENDPOINT,
+  SECTION_STATION_INTERVAL_M,
+  type StationsOptions,
+} from "./B05_Profile_Sections_Stations";
+import { sectionsGround, type GroundOptions } from "./B05_Profile_Sections_Ground";
+import type { PlanPipe, PlanStructure } from "../../common_util/common_util_structure_station";
+import type { DesignCurve, Vertex } from "../../A00_Common/design/logic/design_pipeline_types";
+
+export type GenerateOptions = Omit<StationsOptions, "registry"> & GroundOptions;
+
+const KIND: Record<string, string> = {
+  grid: "regular",
+  curve: "curve",
+  pipe: "irregular",
+  structure: "irregular",
+};
+
+/** 서버 `generate_sections` 꼴 몸통 — 종단(길이 · 표본 · 측점) · 횡단 · 요약 · 도면 기준고. */
+export function generateSections(
+  line: ReadonlyArray<Vertex>,
+  curves: ReadonlyArray<DesignCurve>,
+  pipes: ReadonlyArray<PlanPipe>,
+  structures: ReadonlyArray<PlanStructure>,
+  grid: DtmGrid,
+  options: GenerateOptions,
+) {
+  const stations = buildStations(line, curves, pipes, structures, options);
+  if (stations.length < 2) throw new Error("경로는 최소 2개의 (x, y, z) 좌표로 구성되어야 합니다.");
+  const gridM = stationsAlong(
+    line,
+    options.intervalM ?? SECTION_STATION_INTERVAL_M,
+    options.includeEndpoint ?? SECTION_INCLUDE_ENDPOINT,
+  );
+  const planted = plantedStations(gridM, lineLength(line), pipes, structures, options);
+  const chainages = stations.map((station) => station.chainageM);
+  const ground = sectionsGround(line, chainages, grid, options);
+  const crossSections = stations.map((station, index) => {
+    const at = ground.stations[index];
+    const mark = [...planted].find(([m]) => Math.abs(m - station.chainageM) < 1e-6)?.[1];
+    const kind = index === 0 ? "bp" : station.kind === "end" ? "ep" : KIND[station.kind];
+    const head: Record<string, unknown> = {
+      station_id: stationIdOf(station.chainageM),
+      chainage_m: at.chainage_m,
+      label: formatStation(station.chainageM) + (kind === "curve" ? " (MC)" : ""),
+      kind,
+      center_x: at.center_x,
+      center_y: at.center_y,
+      center_z: at.center_z,
+      azimuth_deg: station.azimuthDeg,
+      plan_radius_m: station.planRadiusM,
+      curve_outer_side: station.curveOuterSide,
+      curve_widening_m: station.curveWideningM,
+      uphill_side: at.uphill_side,
+      frame: {
+        origin: { x: at.center_x, y: at.center_y, z: at.center_z },
+        tangent_xy: at.tangent_xy,
+        left_xy: at.left_xy,
+        up_xyz: [0.0, 0.0, 1.0],
+      },
+    };
+    if (mark) {
+      head.structure = mark.title;
+      if (gridM.some((m) => Math.abs(m - station.chainageM) < 1e-6)) head.grid = true;
+    }
+    head.key = station.key;
+    return { head, samples: at.samples };
+  });
+  const z = ground.samples.flatMap((sample) => (sample.z === null ? [] : [sample.z]));
+  return {
+    longitudinal: {
+      length_m: ground.length_m,
+      samples: ground.samples,
+      stations: crossSections.map(({ head }) => head),
+    },
+    cross_sections: crossSections.map(({ head, samples }) => ({ ...head, samples })),
+    summary: {
+      station_count: stations.length,
+      cross_sample_count: crossSections.reduce((sum, { samples }) => sum + samples.length, 0),
+      invalid_longitudinal_samples: ground.samples.filter((sample) => !sample.valid).length,
+      invalid_cross_samples: crossSections.reduce(
+        (sum, { samples }) => sum + samples.filter((sample) => !sample.valid).length,
+        0,
+      ),
+    },
+    datum: z.length ? Math.floor(Math.min(...z) / 10) * 10 : null,
+  };
+}

B05_Profile/logic/B05_Profile_Sections_Ground.ts

@@ -69,9 +69,9 @@ export interface GroundOptions {
   longSampleIntervalM?: number;
 }
 
-/** 파이썬 `round(x, 6)` 자리. */
-export const round6 = (value: number): number => Math.round(value * 1e6) / 1e6;
-const round9 = (value: number): number => Math.round(value * 1e9) / 1e9;
+/** 파이썬 `round(x, 6)` 자리 — 십진 자릿수 반올림(곱셈 반올림 오차 없음 · 511-B B-2). */
+export const round6 = (value: number): number => Number(value.toFixed(6));
+const round9 = (value: number): number => Number(value.toFixed(9));
 
 function sample(grid: DtmGrid, x: number, y: number): GroundSample {
   const z = heightAt(grid, x, y);

B05_Profile/logic/B05_Profile_Sections_Stations.ts

@@ -239,31 +239,31 @@ export interface StationsOptions {
 }
 
 /** 노선 길이(m) — 길이 0 선분은 0(서버 `_clean_polyline`). */
-const lineLength = (line: ReadonlyArray<Vertex>): number =>
+export const lineLength = (line: ReadonlyArray<Vertex>): number =>
   line.reduce(
     (sum, vertex, index) =>
       index ? sum + Math.hypot(vertex[0] - line[index - 1][0], vertex[1] - line[index - 1][1]) : 0,
     0,
   );
 
-/** 측점 한 벌 — 서버 `generate_sections` 측점 목록과 같은 자리 · 종류 · 틀 · 반경 · 확폭(지반 null). */
-export function buildStations(
-  line: ReadonlyArray<Vertex>,
-  curves: ReadonlyArray<DesignCurve>,
+/** 심는 측점 한 자리 — 주인 종류 · id · 역할 · 카드 이름(서버 측점 `structure` 칸). */
+export interface PlantedMark {
+  kind: "pipe" | "structure";
+  id: string;
+  role: string;
+  title: string;
+}
+
+/** 심는 측점(관 · 구조물) — 격자 0.005 m 안이면 격자 자리에 얹고 서로 겹치면 앞선 것만(서버 `extras`). */
+export function plantedStations(
+  grid: ReadonlyArray<number>,
+  total: number,
   pipes: ReadonlyArray<PlanPipe>,
   structures: ReadonlyArray<PlanStructure>,
-  options: StationsOptions,
-): PipelineStation[] {
-  if (line.length < 2) return [];
-  const intervalM = options.intervalM ?? SECTION_STATION_INTERVAL_M;
-  const total = lineLength(line);
-  // 일반측점은 스냅이 옮기지 않음(요구 280-4) — MC 는 아래 곡선 측점으로 더함
-  const grid = stationsAlong(line, intervalM, options.includeEndpoint ?? SECTION_INCLUDE_ENDPOINT);
-  const spans = designSpans(line, curves);
-
-  // 심는 측점(관 · 구조물) — 격자 0.005 m 안이면 격자 자리에 얹고 서로 겹치면 앞선 것만(서버 `extras`).
+  options: Pick<StationsOptions, "types" | "registry" | "plus">,
+): Map<number, PlantedMark> {
   const pipeIds = new Set(pipes.map((pipe) => pipe.id ?? `pipe-${pipe.chainage_m.toFixed(2)}`));
-  const planted = new Map<number, { kind: "pipe" | "structure"; id: string; role: string }>();
+  const planted = new Map<number, PlantedMark>();
   for (const station of planStations(
     pipes,
     structures,
@@ -280,8 +280,27 @@ export function buildStations(
       kind: pipeIds.has(owner) ? "pipe" : "structure",
       id: owner,
       role: station.role,
+      title: station.title,
     });
   }
+  return planted;
+}
+
+/** 측점 한 벌 — 서버 `generate_sections` 측점 목록과 같은 자리 · 종류 · 틀 · 반경 · 확폭(지반 null). */
+export function buildStations(
+  line: ReadonlyArray<Vertex>,
+  curves: ReadonlyArray<DesignCurve>,
+  pipes: ReadonlyArray<PlanPipe>,
+  structures: ReadonlyArray<PlanStructure>,
+  options: StationsOptions,
+): PipelineStation[] {
+  if (line.length < 2) return [];
+  const intervalM = options.intervalM ?? SECTION_STATION_INTERVAL_M;
+  const total = lineLength(line);
+  // 일반측점은 스냅이 옮기지 않음(요구 280-4) — MC 는 아래 곡선 측점으로 더함
+  const grid = stationsAlong(line, intervalM, options.includeEndpoint ?? SECTION_INCLUDE_ENDPOINT);
+  const spans = designSpans(line, curves);
+  const planted = plantedStations(grid, total, pipes, structures, options);
   const withPlanted = [...new Set([...grid, ...planted.keys()])];
   // 곡선 측점(252-2) — MC 에 측점이 없으면 더함 · 값 자릿수 = 스냅 간격(스냅 끔 = 정수 m) · 격자 번호 없음
   const curved = curveStations(

B06_Section/B06_Section_Router_Calc.py

@@ -16,7 +16,7 @@ from uuid import UUID
 from fastapi import APIRouter, Request
 from fastapi.responses import JSONResponse
 
-from common_util.common_util_calc_runner import run_calc_served
+from common_util.common_util_calc_runner import SERVER_ONLY_IDS, run_calc_served
 
 router = APIRouter(prefix="/api/projects", tags=["B06 Calc Server"])
 
@@ -48,6 +48,8 @@ async def run_calc_endpoint(project_id: UUID, request: Request) -> dict | JSONRe
         return _error(400, "run = id 목록")
     if not isinstance(inputs, dict):
         return _error(400, "inputs = 객체")
+    if SERVER_ONLY_IDS.intersection(run):
+        return _error(400, "서버 측점 생성은 창구 밖")
     try:
         answer = await asyncio.to_thread(run_calc_served, run, inputs)
     except ValueError as exc:

common_util/common_util_calc_runner.py

@@ -44,8 +44,12 @@ NODE_IDS = frozenset(
         "cross.berm_spans",
         "facility.rebase",
         "stations.carry",
+        "stations.list",
+        "stations.sections",
     }
 )
+# 창구(`/calc`)가 안 받는 id — 서버 파일 경로를 입력으로 받음(측점 생성 · 511-B B-2)
+SERVER_ONLY_IDS = frozenset({"stations.sections"})
 # 시험 길(`design_calc_node_trial.ts` `TRIAL` 표와 같음) — 조작 중 브라우저 함수를 서버가 같은 TS 로
 TRIAL_IDS = frozenset(
     {

common_util/common_util_surface_sampler.py

@@ -131,7 +131,9 @@ class DtmGridSampler:
 # ponytail: 지표면 4벌(sheet 격자 한 벌 약 17 MB) — 서버 프로세스 하나 전제 · 늘면 maxsize 를 셈.
 @lru_cache(maxsize=4)
 def _open_dtm(path: str, _mtime_ns: int, _size: int) -> DtmGridSampler:
-    return DtmGridSampler.from_npz(path)
+    sampler = DtmGridSampler.from_npz(path)
+    sampler.source = path  # npz 경로 — 서버 측점 생성이 같은 격자를 Node 에 넘김(511-B B-2)
+    return sampler
 
 
 #: 브라우저로 보내는 격자 꼴(`dtm_grid_bytes`) 머리 — TS `parseDtmGrid` 가 같은 값을 봄.

resources/tester/test_472_3_calc_registry.py

@@ -48,6 +48,8 @@ NODE_IDS = {
     "cross.berm_spans",
     "facility.rebase",
     "stations.carry",
+    "stations.list",
+    "stations.sections",
 }
 
 pytestmark = pytest.mark.skipif(

resources/tester/test_472_3_calc_runner.py

@@ -69,8 +69,8 @@ def test_실행기_값_server_calc_와_같음() -> None:
 
 
 def test_Node_실행기_아닌_id_는_ValueError() -> None:
-    with pytest.raises(ValueError, match="stations.list"):
-        runner.run_calc(["masshaul.cumulative", "stations.list"], {})
+    with pytest.raises(ValueError, match="ground.widen"):
+        runner.run_calc(["masshaul.cumulative", "ground.widen"], {})
 
 
 # ── 472-4 ② — 횡단 설계선 · 소단 구간 Node 길 ──────────────────────────────────

resources/tester/test_511_a_calc_server.py

@@ -114,8 +114,8 @@ def test_본문_상한_꼴_모르는_id(client, monkeypatch):
     assert http.post(url, content=b"{nope").status_code == 400
     assert http.post(url, json={"run": "cross.fit"}).status_code == 400
     assert http.post(url, json={"run": ["cross.fit"], "inputs": []}).status_code == 400
-    bad = http.post(url, json={"run": ["stations.list"], "inputs": {}})
-    assert bad.status_code == 400 and "stations.list" in bad.json()["message"]
+    bad = http.post(url, json={"run": ["ground.widen"], "inputs": {}})
+    assert bad.status_code == 400 and "ground.widen" in bad.json()["message"]
 
 
 def test_떠_있는_Node_답_파일_길과_같음_죽어도_다시():

resources/tester/test_511_b2_stations_node.py

@@ -0,0 +1,201 @@
+"""PLAN 511-B B-2 (요구 320-4) — 서버 측점 생성 = 화면과 같은 TS(Node `stations.sections`).
+
+못박는 것
+  - 고정 자료(`fixtures/golden_472`) 노선 · 관 · 구조물 · 추가 측점 — `build_sections`
+    Node 길 = 파이썬 `generate_sections` 길 0 차(칸 · 차례 · 값 · 측점 열쇠 `key` 만 더함) —
+    곡선표 있음 · 없음 · 스냅 10 m · 측점 간격 10 m · 끝 측점 뺌.
+  - DTM 아닌 지표면 = 파이썬 길(Node 안 부름 · 열쇠 없음).
+  - 열쇠 = Node `stations.list`(화면 묶음 stations 단계 `buildStations`) 열쇠.
+  - 창구(`/calc`)는 `stations.sections`(서버 파일 경로 입력)를 안 받음.
+  - 등록부 R5 · R6 · R7 = node:stations.list · G4 = node:stations.sections(472-4 until 없음).
+  - 공유 DB · 실제 storage 안 씀(고정 자료 사본).
+
+    ./venv/Scripts/python.exe -m pytest resources/tester/test_511_b2_stations_node.py -q
+"""
+
+from __future__ import annotations
+
+import sys
+from dataclasses import replace
+from pathlib import Path
+
+import numpy as np
+import pytest
+
+HERE = Path(__file__).resolve().parent
+ROOT = HERE.parents[1]
+for path in (ROOT, HERE):
+    if str(path) not in sys.path:
+        sys.path.insert(0, str(path))
+
+import helper_472_1_paths as paths  # noqa: E402
+
+from B05_Profile import B05_Profile_Engine_Sections as sections  # noqa: E402
+from B05_Profile import B05_Profile_Engine_Sections_Node as node  # noqa: E402
+from B05_Profile.B05_Profile_Engine_Sections_Core import SectionGenerationOptions  # noqa: E402
+from common_util import common_util_calc_runner as runner  # noqa: E402
+from common_util.common_util_surface_sampler import (  # noqa: E402
+    CallableSurfaceSampler,
+    build_surface_sampler,
+)
+
+pytestmark = pytest.mark.skipif(
+    not (ROOT / "config" / "node_modules" / "vite").is_dir(), reason="프론트엔드 의존성 미설치"
+)
+
+
+@pytest.fixture(scope="module")
+def project(tmp_path_factory):
+    root = paths.stage_project(tmp_path_factory.mktemp("b2") / "project")
+    summary = paths.read("summary.json")["longitudinal"]["data"]
+    options = SectionGenerationOptions(
+        **{k: v for k, v in summary["options"].items() if k != "extra_stations"}
+    )
+    polyline = sections._load_route_polyline(root, paths.ROUTE)
+    pipes = sections._load_pipe_points(root, polyline)
+    facilities = sections.station_facilities(root, pipes, polyline)
+    extras = sections.resolve_extra_stations(
+        root, facilities[0], structures=facilities[1], plus=facilities[2]
+    )
+    return {
+        "root": root,
+        "options": options,
+        "polyline": polyline,
+        "pipes": pipes,
+        "facilities": facilities,
+        "extras": extras,
+        "sampler": build_surface_sampler(root / "B04_PreProcess/models", *paths.SURFACE),
+        "curves": sections._load_design_curves(root),
+    }
+
+
+def _both(project, sampler=None, **change):
+    kw = {
+        "options": project["options"],
+        "grade_options": None,
+        "source_snapshot": {"filter": "classification"},
+        "crs": "EPSG:5186",
+        "design_curves": project["curves"],
+        "station_snap": sections.load_station_snap(project["root"]),
+        "station_snap_step": sections.load_station_snap_step(project["root"]),
+        **change,
+    }
+    args = (project["polyline"], sampler or project["sampler"], project["pipes"], project["extras"])
+    python, _ = sections.build_sections(*args, **kw)
+    noded, _ = sections.build_sections(*args, facilities=project["facilities"], **kw)
+    return python, noded
+
+
+def _without_key(value):
+    if isinstance(value, dict):
+        return {k: _without_key(v) for k, v in value.items() if k != "key"}
+    if isinstance(value, list):
+        return [_without_key(v) for v in value]
+    return value
+
+
+def _first_diff(a, b, path=""):
+    """첫 다른 자리(값 · 칸 차례) — 큰 글 비교를 pytest 에 안 넘김. 수 = 같은 값(0 ↔ 0.0)."""
+    if isinstance(a, dict) and isinstance(b, dict):
+        if list(a) != list(b):
+            return f"{path}: 칸 {list(a)} != {list(b)}"
+        return next((d for k in a if (d := _first_diff(a[k], b[k], f"{path}.{k}"))), None)
+    if isinstance(a, list) and isinstance(b, list):
+        if len(a) != len(b):
+            return f"{path}: 길이 {len(a)} != {len(b)}"
+        return next(
+            (d for i, (x, y) in enumerate(zip(a, b)) if (d := _first_diff(x, y, f"{path}[{i}]"))),
+            None,
+        )
+    return None if a == b else f"{path}: {a!r} != {b!r}"
+
+
+def _same(python, noded):
+    hit = _first_diff(python, _without_key(noded))  # 칸 차례 · 자릿수까지
+    assert hit is None, hit
+    keys = [s.get("key") for s in noded["longitudinal"]["stations"]]
+    assert all(keys) and keys == [s["key"] for s in noded["cross_sections"]]
+    return keys
+
+
+@pytest.mark.parametrize(
+    "case",
+    ["as_saved", "no_curves", "snap10", "interval10", "no_endpoint"],
+)
+def test_Node_길_파이썬_길_0차(project, case):
+    change = {
+        "as_saved": {},
+        "no_curves": {"design_curves": []},
+        "snap10": {"station_snap": True, "station_snap_step": 10.0},
+        "interval10": {"options": replace(project["options"], station_interval_m=10.0)},
+        "no_endpoint": {"options": replace(project["options"], include_endpoint=False)},
+    }[case]
+    python, noded = _both(project, **change)
+    keys = _same(python, noded)
+    assert len(keys) == len(set(keys)) > 10
+    if case == "as_saved":
+        assert len(keys) == 57 and keys[0] == "end:BP" and keys[-1] == "end:EP"
+        kinds = {s["kind"] for s in python["longitudinal"]["stations"]}
+        assert {"bp", "ep", "regular", "irregular"} <= kinds
+        assert any(k.startswith("pipe:") for k in keys)
+
+
+def test_열쇠_Node_측점_목록과_같음(project):
+    _, noded = _both(project)
+    opts = project["options"]
+    stations = node.stations_input(
+        [[p[0], p[1]] for p in project["polyline"]],
+        *project["facilities"],
+        opts,
+        project["curves"],
+        sections.load_station_snap(project["root"]),
+        sections.load_station_snap_step(project["root"]),
+    )
+    listed = node.node_stations(stations)
+    assert [s["key"] for s in listed] == [s["key"] for s in noded["longitudinal"]["stations"]]
+    assert [s["chainageM"] for s in listed] == [
+        s["chainage_m"] for s in noded["longitudinal"]["stations"]
+    ]
+
+
+def test_DTM_아닌_지표면_파이썬_길(project, monkeypatch):
+    called = []
+    monkeypatch.setattr(runner, "run_calc_served", lambda *a: called.append(a))
+    flat = CallableSurfaceSampler(lambda xy: np.full(len(xy), 100.0))
+    python, noded = _both(project, sampler=flat)
+    assert called == [] and python == noded
+    assert "key" not in noded["longitudinal"]["stations"][0]
+
+
+def test_Node_못_돌림_파이썬_길(project, monkeypatch):
+    monkeypatch.setattr(runner, "run_calc_served", lambda *a: None)
+    python, noded = _both(project)
+    assert python == noded
+
+
+def test_창구는_서버_측점_생성_안_받음():
+    from fastapi import FastAPI
+    from fastapi.testclient import TestClient
+
+    from B06_Section import B06_Section_Router_Calc as calc_router
+
+    app = FastAPI()
+    app.include_router(calc_router.router)
+    http = TestClient(app)
+    url = "/api/projects/11111111-2222-3333-4444-555555555555/calc"
+    body = {"run": ["stations.sections"], "inputs": {"stations": {"grid": "C:/x"}}}
+    bad = http.post(url, json=body)
+    assert bad.status_code == 400 and "창구 밖" in bad.json()["message"]
+    assert runner.SERVER_ONLY_IDS <= runner.NODE_IDS
+
+
+def test_등록부_측점_줄_Node():
+    src = (ROOT / "A00_Common/design/logic/design_calc_registry.ts").read_text(encoding="utf-8")
+    for no, run in (
+        ("R5", "stations.list"),
+        ("R6", "stations.list"),
+        ("R7", "stations.list"),
+        ("G4", "stations.sections"),
+    ):
+        row = src.split(f'no: "{no}"')[1].split("\n  },")[0]
+        assert f'runner: "node:{run}"' in row and "until" not in row, no