eomsangdonandClaude Opus 5.5
3082007dba
- 검증_sub4 [적용] 뒤 종단 최대 14.47 % → 14.001 %(정본 0.1 mm 반올림 몫) → 14.0 %(넘음 표시 없음) - test_74 변화점 계획고 비교를 0.5 mm 허용차로 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_014utrjfoW831Vc5wJUd13kL
79 lines
3.0 KiB
Python
79 lines
3.0 KiB
Python
"""노선 [확인] 체인 이월 · 균형 종단 반영(PLAN 74-3 · 74-4).
|
|
|
|
./venv/Scripts/python.exe -m pytest resources/tester/test_74_route_confirm_initial.py -q
|
|
"""
|
|
|
|
import json
|
|
from pathlib import Path
|
|
|
|
import pytest
|
|
|
|
from B05_Profile.B05_Profile_Router_Replan import RouteReplanRequest
|
|
from B05_Profile.B05_Profile_Router_RouteInitial import _set_base_pvi
|
|
from B06_Section.B06_Section_Router_Design import CARRY_INPUT_KEYS
|
|
|
|
ROOT = Path(__file__).resolve().parents[2]
|
|
|
|
|
|
def test_이월은_사용자_입력만() -> None:
|
|
for result_key in (
|
|
"design_elevation_m",
|
|
"cut_area_m2",
|
|
"fill_area_m2",
|
|
"design_line",
|
|
"road_edges",
|
|
"slope_unclosed",
|
|
"section_mode",
|
|
"ditch_side",
|
|
):
|
|
assert result_key not in CARRY_INPUT_KEYS
|
|
assert {"ground_type", "ditch_choice", "cut_slope_ratio_user"} <= set(CARRY_INPUT_KEYS)
|
|
assert "paved" not in CARRY_INPUT_KEYS # 포장 = 노면공 범위로 새로 정함(138-1)
|
|
|
|
|
|
def test_체인이_옛_설계를_통째로_옮기지_않는다() -> None:
|
|
source = (ROOT / "B03_FileInput" / "B03_FileInput_Service_Chain.py").read_text(encoding="utf-8")
|
|
assert 'record["design"])' not in source # 옛 (누가거리, design 통째) 이월
|
|
assert "compute_default_designs, project_root, long_path, chainages, standard, inputs" in (
|
|
" ".join(source.split())
|
|
)
|
|
|
|
|
|
def test_변화점_계획고를_균형_종단으로(tmp_path: Path) -> None:
|
|
path = tmp_path / "longitudinal.json"
|
|
base = [{"chainage_m": s, "elevation_m": 100.0} for s in (0.0, 20.0, 30.0, 40.0)]
|
|
alignment = {"base_pvi": base, "policy": {}}
|
|
path.write_text(json.dumps({"profile_alignment": alignment}), encoding="utf-8")
|
|
assert _set_base_pvi(path, [0.0, 20.0, 40.0], [10.0, 12.0, 14.0]) == 4
|
|
got = [
|
|
p["elevation_m"]
|
|
for p in json.loads(path.read_text("utf-8"))["profile_alignment"]["base_pvi"]
|
|
]
|
|
# 구조물 측점(30 m)은 직선 보간 · 상한 누를 때 반올림 여유 0.1 mm 몫(419-3)
|
|
assert got == pytest.approx([10.0, 12.0, 13.0, 14.0], abs=5e-4)
|
|
|
|
|
|
def test_확인_요청_기본은_끔() -> None:
|
|
assert RouteReplanRequest().balanced_profile is False
|
|
assert RouteReplanRequest(balanced_profile=True).balanced_profile is True
|
|
|
|
|
|
def test_종단곡선이_있어도_측점마다_목표를_지난다() -> None:
|
|
import numpy as np
|
|
|
|
from B05_Profile.B05_Profile_Engine_Grade_Alignment import (
|
|
AlignmentPolicy,
|
|
build_curves,
|
|
evaluate,
|
|
)
|
|
from B05_Profile.B05_Profile_Engine_Grade_Profile import pass_through
|
|
|
|
base_s = np.array([0.0, 20.0, 40.0, 60.0, 80.0])
|
|
target = np.array([100.0, 102.4, 102.0, 104.6, 103.0]) # 대수차가 커 곡선이 들어감
|
|
policy = AlignmentPolicy.from_dict({})
|
|
curves, _ = build_curves(base_s, target, policy)
|
|
assert curves # 맞춤이 없으면 측점에서 뜸
|
|
base_z = pass_through(base_s, target, policy)
|
|
got = evaluate(base_s, base_z, build_curves(base_s, base_z, policy)[0], base_s)
|
|
assert np.max(np.abs(got - target)) < 1e-3
|